This Solicitation opportunity from Department Of The Navy was posted on October 6, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ELECTRONIC COMPONEN

Closed

N0010426QSA08Federal

Submission Closed10/14/2025, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-27-T-1753

Solicitation SPE7M1-27-T-1753 is issued by the Defense Logistics Agency for the procurement of two circuit card assemblies, identified by NSN 5998375312139. The requirement is for parts conforming to the technical specifications of Consilium Marine US Inc, part number 90105100053-01A, and basic drawing number 19207 12675652 Revision D. The original required delivery date is July 24, 2025, with a delivery lead time of 20 days after order. Delivery is established as FOB Origin under the First Destination Transportation program, with the final destination being the USNS John L. Canley in San Diego, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include compliance with the Buy American Act, DFARS 252.204-7016 regarding covered telecommunications equipment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit quotes via the DIBBS portal and must provide disclosure if using non-domestic materials.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-1776

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-U-0824

Solicitation SPE7M1-27-U-0824 is a total small business set-aside for the procurement of 31 circuit card assemblies, identified by NSN 5998015307980. Issued by the DLA Weapons Support Maritime Supply Chain, this requirement may result in an indefinite delivery contract for a one-year period. The delivery timeline is set at 92 days after the order, with shipping terms as FOB Origin and both inspection and acceptance occurring at the destination. The procurement is conducted under the First Destination Transportation program to optimize costs through government-arranged transportation. Technical compliance requires adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific DLA packaging requirements under RP001. For printed circuit boards, the use of MIL-PRF-31032 is recommended. The contract mandates strict cybersecurity compliance, including a CMMC Level 2 self-assessment and safeguarding of covered defense information. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. All quotes must be submitted via the DIBBS portal, and payment processing is managed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Multi-Purpose Serve OEM ManufacturerThis subcontract opportunity, managed by the Department of Defense through DLA Mechanicsburg, requires the manufacture and supply of one Multi-Purpose Serve unit for prime contractors. The selected provider must be the Original Equipment Manufacturer or an authorized distributor capable of precision manufacturing according to Cage Code 4NCQ6 and reference SB-990179-AM. All units must adhere to MIL-STD-130 for physical identification marking and utilize proprietary tooling and materials to ensure design specifications are met. The procurement falls under NAICS code 334412 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 19, 2026. The final deliverable for this contract is one fully completed Multi-Purpose Serve unit.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the full manufacture and assembly of five Circuit Card Assemblies for prime contractors supporting DLA Mechanicsburg projects. The work must be performed according to Cage Code 1EG52 and reference ROF61205/4, with all assemblies marked in compliance with MIL-STD-130, REV N. The selected provider is required to utilize SMT and through-hole equipment and maintain strict ESD protection protocols to deliver five completed and tested units. Eligible candidates must be an OCM/OEM, a QPL/QML source, or an authorized distributor holding CMMC Level 1 certification. This opportunity falls under NAICS code 334412 and is managed by the Department of Defense through SPRMM1 DLA Mechanicsburg. Responses are due by November 27, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QQA90

Solicitation N0010426QQA90, issued by the Navsup Weapon Systems Support Mech, is a request for the manufacture and procurement of a Circuit Card Assembly. The requirement specifies that the item must conform to the design represented by Cage Code 53711, reference number 6166858, and must be physically identified in accordance with MIL-STD-130, Rev N. The contract is issued as a buy, with the resulting award to be executed bilaterally. All freight is designated as FOB Origin, and accelerated delivery is encouraged. Government source inspection is required, and the contractor is responsible for maintaining all inspection records for 365 calendar days following final delivery. Offerors who are not the original equipment manufacturer must provide official authorization from the OEM to be considered for award. The solicitation incorporates various federal regulations, including the Buy American-Balance of Payments Program and Small Business Subcontracting plans. Packaging must comply with MIL-STD 2073. While the initial response deadline was listed as February 1, 2027, Amendment 0002 has extended the deadline for the receipt of offers to 4:30 PM local time on April 30, 2026. All proposals must be submitted to the NAVSUP office in Mechanicsburg, Pennsylvania, and must include acknowledgment of all amendments.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QHC38

This solicitation, issued by DLA Mechanicsburg under number SPRMM1-26-Q-HC38, seeks the manufacture and delivery of the KIT,CCA,CONROLLER (NIIN 016603072). The requirement specifies that the item must conform to the designs represented by Cage Codes 53711 and 30SS9. Delivery is required as soon as possible (ASAP) with FOB Destination terms. The government intends to make a single award based on a best-value determination where past performance, evaluated via the Supplier Performance Risk System (SPRS), is considered more important than price. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Inspection and acceptance will occur at the origin, with the contractor remaining responsible for all inspection requirements. Invoicing and receiving reports must be submitted electronically through the PIEE-WAWF system. Additional compliance requirements include Item Unique Identification (IUID) per DFARS 252.211-7003, cybersecurity protections under DFARS 252.204-7012, and various Buy American and small business representations.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM126QGF14

Solicitation SPRMM1-26-Q-GF14, issued by NAVSUP Weapons Systems Support for the Department of Defense, is a request for the manufacture and delivery of one Multi-Purpose Serve (NSN 5998-01-705-5773). The procurement is a fixed-price effort requiring the contractor to adhere to strict quality assurance and physical identification standards, specifically MIL-STD-130 Rev N. While drawings and technical data are unavailable, the item must match the design represented by Cage Code 4NCQ6. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code, and authorized distributors must provide signed proof of authorization on company letterhead. Quotes must remain valid for 60 days and may require an informal cost breakdown to determine fair and reasonable pricing. The contract mandates rigorous packaging and marking protocols per MIL-STD-2073 and MIL-STD-129, with specific requirements for CONUS and OCONUS shipments and electrostatic discharge protection where applicable. Inspection and acceptance are conducted at the source, and the contractor is responsible for maintaining inspection records for 365 days post-delivery. Administrative requirements include the mandatory use of PIEE-WAWF for the electronic submission of combined invoice and receiving reports. Evaluation of offers will be based on the Supplier Performance Risk System (SPRS), focusing on item, price, and supplier risk, with a strict prohibition on the use of additive manufacturing unless specifically authorized. Delivery is designated for the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM127QKA49

Solicitation SPRMM127QKA49, issued by NAVSUP Weapon System Support for the Department of Defense, seeks the manufacture and delivery of five Circuit Card Assemblies (NSN 5998-20-007-0323). The required items must conform to the design represented by Cage Code 1EG52, reference number ROF61205/4. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with the government utilizing the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. Offerors who are not the Original Equipment Manufacturer (OEM) must identify the OEM and their associated CAGE code. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. Specific requirements include electrostatic discharge protection per ANSI/ESD S20.20-2021 for sensitive items and marking in accordance with MIL-STD-129. Inspection and acceptance will occur at the origin. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic submission of invoices and receiving reports. Additionally, the solicitation specifies a CMMC Level 1 self-certification requirement and prohibits the procurement of assemblies manufactured, assembled, or delivered from a Covered Nation.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM126RHB33

Solicitation SPRMM126RHB33 is a firm-fixed-price procurement issued by DLA Mechanicsburg for the manufacture of Module Assembly, Rim (NSN 5998-01-625-8080). The requirement is unrestricted and has undergone several amendments, ultimately increasing the total quantity to 37 units and extending the offer due date to January 29, 2027. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to quality and security standards, requiring contractors to maintain a Secret level security clearance in accordance with DD Form 254 and comply with ANSI/ESD S20.20 for electrostatic discharge control. All deliverables must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1 and MIL-STD-129. Inspection is conducted at the origin by the Contract Administration Office, and the contractor must maintain inspection records for 365 days post-delivery. Administrative requirements include the electronic submission of receiving reports and invoices through the Wide Area WorkFlow system.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

F-16 Circuit Card Assembly

Solicitation # SPRHA4-27-R-0952

Ut DLA Aviation At Ogden

POSTED

DEADLINE

Solicitation # N0038327QAA13

Solicitation N00383-27-Q-AA13, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the overhaul, upgrade, repair, testing, and inspection of various printed circuit boards and assemblies. The scope includes five specific line items, including printed circuit boards and circuit card assemblies with NSNs 5998-01-512-3463, 015123482, 015215180, 1680-01-619-4547, and 5998-01-620-1746. The objective is to return these assets to a Ready for Issue condition. The government intends to make a single award based on a combination of price and past performance, with past performance weighted as the more important factor. The contractor is responsible for providing all labor, materials, and tooling, with a strict prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Key performance requirements include adherence to Repair Turnaround Times and the use of the Commercial Asset Visibility system for reporting. Quality standards are rigorous, requiring compliance with ISO 9001/SAE AS9100 and specific calibration standards such as ANSI/NCSL Z540.3. The contract includes detailed provisions for Beyond Economical Repair and Over and Above Repair determinations, both of which require written concurrence from DCMA. Packaging must meet MIL-STD-2073-1 and MIL-STD-129 standards, and all invoicing must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

about 21 hours ago

DEADLINE

in 29 days

AI Contract Overview

This contract involves the procurement of electronic components under solicitation number N0010426QSA08 issued by the Department of the Navy's Naval Surface Warfare Center in Mechanicsburg, Pennsylvania. The scope primarily covers electronic parts that must adhere to specific military standards, including MIL-STD-130 for marking and quality assurance requirements. The contract stipulates that all supplies are to be delivered FOB origin, with government source inspection required prior to acceptance. It emphasizes the importance of traceability, requiring vendors to provide authorization from original equipment manufacturers if they are not the direct manufacturer. The contract incorporates various applicable documents and standards, including military specifications and data item descriptions, and references the use of a Basic Ordering Agreement (BOA), allowing for potential quantity increases through options exercised within specified timeframes. Key contractual provisions include strict compliance with quality assurance protocols, detailed inspection and acceptance procedures, and packaging standards aligned with MIL-STD-2073. The agreement also mandates detailed record-keeping by the contractor, including inspection records maintained for at least 365 days post-delivery. Additionally, the contract highlights the importance of proper documentation for design changes, with specific codes indicating the nature of any substitutions or modifications. The procurement process is time-sensitive, with responses due by October 14, 2025, and the primary point of contact being Brett A. DePalma, reachable via email or phone. Overall, the contract emphasizes compliance with military standards, traceability, and quality assurance to ensure the procurement of reliable electronic components for naval applications.

General Info

Navy solicits fixed-price electronic component with MIL-STD compliance, inspections, and option for increased quantity.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

N0010426QSA080001.pdf

N0010426QSA08.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedOct 6

Solicitation

Response DeadlineOct 14

Deadline has passed

Submission Closed

10/14/2025, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

CONTACT INFORMATION|4|N7M3.6|HQT|+1 (555) 000-0000|contact@example.gov| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE OF SUPPLIES|26||||||||||||||||||||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|COMBO|N/A|TO BE DETERMINED (TBD)|N00104|TBD|TBD|SEE SCHEDULE|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| OPTION FOR INCREASED QUANTITY (MAR 1989)|1|365 DAYS ARO| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2025)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND2025-O0004))|13|334412|750 EMPLOYEES|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| All freight is FOB Origin. This RFQ is for a buy. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. Verify nomenclature, part number, and NSN prior to responding. Government source inspection is required. Unit Price:__________ FIRM Total Price:__________ FIRM Procurement Turnaround Time (PTAT) :__________ Awardee CAGE: __________ Inspection & Acceptance CAGE, if not at source:__________ Delivery Vehicle (if Delivery Order requested) (if your company has a current BOA/IDIQ, for example) :__________ Important Traceability Notice: If you are not the manufacturer of the material you are offering, you must provide a letter/official email from the OEM confirming your company is authorized an authorized distributor of their items. If your company has a Basic Ordering Agreement (BOA) for the items under this solicitation, the following applies to this solicitation and the resultant contract: This solicitation �resultant order� is issued under and pursuant to the provisions of the Basic Ordering Agreement (BOA). The terms and conditions of the Agreement are hereby incorporated by reference and, except as provided herein by this order, remain in full force and effect. If any conflict arises in the terms of this solicitation �resultant order� order versus the terms in the BOA, the terms of the BOA shall apply. The Government intends to add an option quantity to the resultant contract. In reference to the option quantity, the Government may increase the quantity of supplies called for in the Schedule at the unit price specified. The Contracting Officer may exercise the option by written notice to the Contractor within the number of days in FAR 52.217-6 herein. Delivery of the added items shall continue at the same rate as the like items called for under the contract, unless the parties otherwise agree. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for the ELECTRONIC COMPONEN . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. DOCUMENT REF DATA=MIL-STD-130 | | |K |000115|A| | | 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The ELECTRONIC COMPONEN furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no. ;04801 600-36050; 3.2 Marking - This item shall be physically identified in accordance with MIL-STD-130. 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.2 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH.