Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electronic Component Manufacturing (Semiconductor Diode Production)

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture of military-grade semiconductor diodes specified under NSN 5961016524428 with part numbers MC-001368 and MC-001370-01, requiring full compliance with Department of Defense standards for marking, packaging, and traceability throughout the production and delivery process. These components are critical for defense applications and must meet stringent quality and reliability benchmarks to ensure operational readiness in military systems. The work is to be performed at a designated facility in West Bath, Maine, with a zip code of 04530, indicating a specific geographic requirement for production and logistics handling. Submitted as a subcontract under NAICS code 334413, this opportunity is part of the broader defense supply chain managed by the Active Devices Division of the Department of Defense. The solicitation was posted on July 28, 2026, with a tightly constrained response deadline of July 31, 2026, signaling urgency in sourcing qualified suppliers. All bidders must demonstrate capability in high-reliability semiconductor manufacturing, adherence to DoD traceability protocols, and experience supplying components to defense contractors. The contract is accessible via the DIBBS platform, ensuring transparency and compliance with federal procurement procedures for defense-related subcontracting.

General Info

Manufacture military-grade diodes per DoD standards in West Bath, Maine, under urgent defense subcontract.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

WEST BATH, ME, 04530, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of military-grade semiconductor diodes (NSN 5961016524428, part numbers MC-001368 and MC-001370-01) with compliance to DoD standards for marking, packaging, and traceability.

Similar Contracts

Same NAICS industry code

Optoelectronic Control Unit Manufacturing & AssemblyThe contract requires the full manufacturing, assembly, and testing of two military-spec optoelectronic control units bearing NSN 5980-01-688-0147, with strict adherence to Department of Defense technical and quality standards set by the Defense Logistics Agency. All work must meet exacting military specifications ensuring performance, durability, and reliability under operational conditions, and the finished products must be fully tested to verify compliance. The subcontract is issued under NAICS code 334413 for other electronic component manufacturing, and the work is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 7, 2026, indicating a narrow window for qualified vendors to submit proposals. While no specific place of performance or point of contact is provided, the work is expected to be executed by a subcontractor capable of handling sensitive defense electronics manufacturing under regulated conditions. Participation requires demonstrated experience in producing military-grade optoelectronic systems and the infrastructure to meet DLA’s stringent quality assurance protocols.

ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

Qualified Manufacturer of MIL-PRF-38535 Compliant MicrocircuitsThe contract requires the manufacture of high-reliability memory microcircuits that fully comply with MIL-PRF-38535 standards and all applicable Defense Logistics Agency requirements, encompassing stringent process controls, comprehensive testing protocols, and rigorous quality assurance measures to ensure mission-critical performance. The work must be performed at the specified place of performance in Columbus, Ohio, with all production activities adhering to federal defense standards for electronic components used in high-stakes military and aerospace applications. This is a subcontract opportunity posted by the Active Devices Division under the Department of Defense, with a NAICS code of 334413 for semiconductor and related device manufacturing. Responses are due by August 10, 2026, and the contract is targeted toward qualified manufacturers capable of meeting the exacting technical, procedural, and documentation demands of defense-grade microcircuit production. All parties must demonstrate established capability in meeting MIL-PRF-38535 certification criteria, including traceability, lot control, and environmental stress screening, to ensure reliability under extreme operational conditions.

ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

SOLAR CELL PANELThe contract pertains to the procurement of a single solar cell panel identified by NSN 6117-01-521-3099 and part number 735X641, with a total quantity of one unit, priced at one dollar per unit. Delivery is required within five days of contract award, with FOB origin terms, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point. The item must be packaged in compliance with ASTM D3951, though all applicable DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere strictly to MIL-STD-129, including proper unit of issue and quantity per unit pack as specified, and palletization must follow DLA’s RP001 procurement packaging requirements. The shipment is to be sent via traceable means, excluding parcel post, to the designated military facility at Camp Clark, Missouri, with a specific freight shipping address and mark-for details provided. The shipment is classified as a RDD 3-digit RDD/NMCS, and the contract mandates the use of a traceable and accountable freight method. The required delivery date is July 28, 2026, and the solicitation number is SPE7M0-26-T-021W, issued under a federal acquisition framework with NAICS code 334413. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and government identification must be removed from non-accepted supplies per RQ011. The point of contact for inquiries is Laurie Wassmuth, with contact information provided for support.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

MICROCIRCUIT, MEMORYThis contract is for the procurement of a memory microcircuit classified under Federal Supply Class 5962, with the NSN 5962-01-182-7277 and part number 5962-8670601LA. The contract mandates strict compliance with technical, quality, packaging, and traceability requirements defined by the Defense Logistics Agency, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, as well as specific provisions from DLA Procurement Notes C03 and L04. Only approved sources listed on the Qualified Manufacturers List (QML) and Qualified Suppliers List for Semiconductor Devices may supply this item, and any deviation from the solicited part number or manufacturer is unacceptable. The contractor must retain full supply chain traceability documentation as mandated by DLA Directive C03 and submit completed DLA Land and Maritime Form 918 along with unredacted traceability or test reports at least 15 days before delivery. Shipment is prohibited until written confirmation is received from the contract administrator, and failure to include the exact authorized documentation with the shipment will result in non-final payment. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with unit-level lead finish identification per IPC/JEDEC J-STD-609, requiring specific Pb and Pb-free markings on each unit pack. ESD and EMI protection is mandatory, necessitating the use of certified MIL-PRF-81705 barrier materials sourced only from qualified manufacturers listed on QPL-81705, with appropriate cushioning meeting A-A-59136 Class 1, Grade B density and thickness requirements unless using certified form-fitting ESD containers. The item is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and all components must be free from surplus or unauthorized sources. Delivery is FOB origin, with a required delivery date of December 14, 2026, and a 147-day fulfillment timeline. The sole authorized delivery point is DLA Distribution in Columbus, Ohio, with shipment coordination governed by DLAD Procurement Notes C19 and C20. All documentation submissions must comply with email size limits, naming conventions, and strict formatting rules to ensure government receipt and acceptance.

ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

CONTROL, OPTOELECTROThis contract specifies the procurement of two units of the control optoelectronic item identified by NSN 5980-01-688-0147, with a firm fixed price and no variance allowed in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on the acquisition size. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging guidelines, including marking per MIL-STD-129 without special codes, and palletization adhering to DLA standards. Delivery is due within 90 days after award, with FOB origin terms and inspection and acceptance occurring at the origin. The item is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation and shipping details governed by DLA procedural notes. The contract is issued under solicitation SPE7M5-26-Q-0774, with a response deadline in August 2026, and is classified under NAICS code 334413 as a federal procurement by the Department of Defense's Active Devices Division. The government requires delivery by May 1, 2026, to meet operational needs, and the contract includes designated points of contact for coordination.

ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

FUSE, CARTRIDGEThe contract is for the procurement of 909 units of a fuse cartridge with NSN 5920-00-054-3375 and part number 272002 manufactured by Littlefuse Inc., issued under solicitation SPE7M5-26-T-356V. Delivery is required within 147 days from the contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E using preservation method 41, unit container type D3, and packaging code U, with all marking adhering to MIL-STD-129 and no special markings permitted. Strict prohibitions ban the intentional introduction of mercury or mercury-containing compounds in the product, preservation materials, packaging, or marking, with narrow exceptions for functional uses in specified devices such as batteries, fluorescent lights, sensors, and weapon systems, which must include a secondary containment barrier per NAVSEA 5100-003D. The item is classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is January 5, 2027, with an original required delivery date of January 1, 2027. Payment is based on a unit price of $0.00 per unit for a total price of $0.00, and the solicitation was posted on July 28, 2026, with responses due by August 10, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

SEMICONDUCTOR DEVICThis contract pertains to the procurement of a semiconductor diode item identified by NSN 5961016524428 and part numbers MC-001368 and MC-001370-01, supplied by DRS Naval Power Systems Inc. The item is classified as a commercial off-the-shelf product and requires strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date. Qualified supplier and testing lists for Federal Supply Class 5961 and 5962 apply, and the product must be marked in compliance with IPC/JEDEC J-STD-609 for lead content identification on each unit package, with placements following specified guidelines. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016, and all packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, including the special ESD-sensitive electronic device marking code 39. The item must be delivered FOB origin within five days, with zero variance allowed in quantity, and inspected and accepted at the destination. The delivery address is the USS Lyndon B. Johnson at Bath Iron Works in West Bath, Maine, and shipments must be transported by the fastest traceable means, prohibiting parcel post. All units are to be palletized according to DLA packaging requirements and shipped as a single unit under purchase request 7017318423 with an original required delivery date of June 26, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

Purchase Laser controller that is interchangeable with Toptica DL100 laser head with central wavelength at 637nmThe Naval Research Laboratory intends to award a sole source purchase order to Toptica Photonics Inc for a laser controller compatible with the Toptica DL100 laser head, operating at a central wavelength of 637nm, under the belief that no other supplier can meet the specific technical requirements. This action is justified under the Federal Acquisition Regulation Part 13.106-1(b) using Simplified Acquisition Procedures, as the estimated value does not exceed the $250,000 threshold. The procurement is classified under NAICS code 334413 with a small business size standard and FSC/PSC 6640. Interested parties may submit information demonstrating that competitive sourcing would be advantageous to the government, but responses must provide clear and convincing evidence to challenge the sole source determination. All submissions must reference the notice number N00173-26-P-1301396073 and be received by July 31, 2026, at 0800 hours. No reimbursement will be provided for costs incurred in responding, and the government retains full discretion to proceed without competition regardless of feedback received. The point of contact for inquiries is James Buie at the Naval Research Laboratory in Washington, D.C.

Naval Research Laboratory

POSTED

DEADLINE

Matchbox lasers from RPMC for SCALPSS 2.0 flight projects on CS-8 payloadsThis contract is a sole source requirement for Matchbox lasers from RPMC to support SCALPSS 2.0 flight projects on CS-8 payloads, ensuring specialized components are procured directly from the sole qualified supplier. The solicitation number is 80NSSC26939709Q, issued under NAICS code 334413 for laser equipment manufacturing, and is managed by the NASA Shared Services Center under the National Aeronautics and Space Administration. The notice was posted on July 28, 2026, with a response deadline of July 30, 2026, indicating an urgent procurement timeline. Performance will be conducted in Hampton, Virginia, while the contracting office is located at Stennis Space Center, Mississippi. Shanna Patterson is the primary point of contact for all inquiries, with communications directed to her NASA email address. The procurement is classified as a special notice and does not involve any set-aside provisions, reflecting its exclusive nature tied to mission-critical flight hardware requirements.

NASA Shared Services Center

POSTED

DEADLINE

in about 22 hours

Sources Sought Optical Assembly for Laser ConditioningThe National Institute of Standards and Technology (NIST) is conducting market research to identify potential vendors capable of manufacturing Optical Assembly for Laser Conditioning to meet specific technical requirements. This sources sought notice is not a solicitation, request for proposal, or request for quotation, and no contract award is guaranteed. The agency is gathering information to determine the landscape of available suppliers, assess eligibility for small business set-asides, and evaluate whether a competitive or non-competitive procurement path is appropriate. Responses must include the company providing the product, the actual manufacturer, the country of origin for the product, technical specifications and examples demonstrating past performance, typical lead times, and any additional relevant details—all limited to four pages. Proprietary information should be clearly marked, and no quotes or pricing will be accepted. The requirement is classified under NAICS code 334413 with a small business size standard of 1,250 employees, and NIST is seeking responses from both small and large businesses. The product must be manufactured in the United States, and vendors are required to explicitly state the country of manufacture. All submissions must be sent via email to Lisa Stevens at lisa.stevens@nist.gov by the deadline of August 7, 2026. The place of performance is identified as Boulder, Colorado, while the contracting office is located in Gaithersburg, Maryland.

Department Of Commerce Nist

POSTED

DEADLINE

MICROCIRCUIT, DIGITAThis contract pertains to the procurement of a military-grade microcircuit, specifically identified as NSN 5962-01-168-8667, under Federal Supply Class 5962 for electronic microcircuits. The item is a critical application component with approved part numbers MM54C923J-MIL and MM54C923J/883B from National Semiconductor Corporation, and is subject to stringent qualification, traceability, and packaging standards mandated by the Defense Logistics Agency. Compliance with DLA Master List technical requirements, including qualified supplier lists for semiconductors, is mandatory, and the supplier must maintain complete supply chain traceability documentation in accordance with DLAD Procurement Note C03. Traceability and test reports must be submitted electronically no later than 15 days before delivery, limited to 15 MB per email and named precisely according to contract-specific conventions, and no shipment may proceed without written authorization from the contract administrator. Each lot must include a completed DLA Land and Maritime Form 918 and authorization confirmation within the packaging, and failure to comply renders payment non-final. The microcircuit must be packaged in strict adherence to MIL-STD-2073-1E and MIL-STD-129, with ESD and EMI protection compliant with MIL-PRF-81705 using qualified barrier materials listed on QPL-81705. Cushioning must meet A-A-59136 Class 1 Grade B density requirements (1.7 to 2.2 lb/ft³) with minimum thickness exceeding lead length by 1/8 inch, or alternatively, components must be secured in form-fitting ESD-protective containers. All individual unit packs must be labeled per IPC/JEDEC J-STD-609 to clearly identify lead finish attributes, and mercury or mercury compounds are strictly prohibited except under specified exceptions for functional uses in batteries, sensors, or instruments per NAVSEA guidance. The item is to be delivered FOB origin within 115 days, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract requires a cybersecurity maturity model certification level 2 self-assessment, and the sole point of performance and shipping address is DLA Distribution in Columbus, Ohio.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

SWITCH, THERMOSTATICThe contract pertains to the procurement of a thermostatic switch with NSN 5930-01-159-9923, quantity one unit, under solicitation SPE7M8-26-T-5614, with a response deadline of August 7, 2026, and an expected delivery within 20 days after award. The item is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Strict prohibitions against intentional addition of mercury or mercury-containing compounds apply to the supplied hardware, except for specific exemptions outlined for batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier compliant with NAVSEA 5100-003D. The offeror must provide a complete data package covering both the approved part and any alternates, as no existing data is available. The contract is managed by the Department of Defense’s Electrical Devices Division, with performance addressed to FPO, and inquiries directed to Dondiego Boler at the provided contact details.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Government Contract Logistics & WAWF Invoicing SupportThe contract entails comprehensive logistics support focused on enabling electronic invoicing through the Wide Area WorkFlow system, tracking shipments, confirming receipt of goods, and coordinating directly with government representatives to streamline contract execution and ensure prompt payment. The work centers on facilitating seamless communication and documentation between the contractor and the Department of Defense to maintain compliance and operational efficiency within federal procurement processes. Performance of this subcontract is located in Kings Bay, Georgia, with a NAICS code of 541214 indicating professional, scientific, and technical services related to accounting, computer systems, and administrative support. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contracting activity is under the Active Devices Division, which operates under the Department of Defense, and the contract is managed through the DIBBS platform with the official solicitation number SPE7M526T355X.

Payroll Services

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & Documentation SupportThe contract requires the preparation and submission of Safety Data Sheets and hazard warning labels for circuit breakers that contain hazardous materials, ensuring full compliance with OSHA and DFARS regulations. All documentation must be accurate, complete, and aligned with federal standards for chemical hazard communication and defense contracting requirements. The work is tied to a subcontract under the Department of Defense’s Active Devices Division, with performance specified at Kings Bay, Georgia, 31547-2631. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, under NAICS code 541690 for other scientific and technical consulting services. While no set-aside classification is specified, the obligation falls squarely within the scope of technical compliance support for defense-related hardware containing regulated substances.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Circuit Breaker Supply and DeliveryThe contract calls for the procurement and delivery of 16 military-specification circuit breakers designated by NSN 5925-01-122-5262, manufactured and packaged to meet stringent military standards. All units must comply with MIL-STD-129 for labeling and marking, ensuring proper identification, traceability, and handling throughout the supply chain. Any applicable hazardous material documentation must be provided to support safe transport and storage. The items are to be delivered to the specified place of performance in Kings Bay, Georgia, under a subcontract arrangement issued by the Department of Defense’s Active Devices Division. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and falls under the NAICS code 335313 for electrical equipment manufacturing.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

Domestic and International Logistics / FOB Origin ShippingThe contract requires management of end-to-end transportation from FOB origin to the final destination in West Bath, Maine, with a strict delivery window of five days. This includes coordinating international shipping, ensuring timely customs clearance, and guaranteeing secure and compliant final delivery to the specified ZIP code 04530. The scope of work is classified under NAICS code 484121, indicating a focus on truck transportation, and is structured as a subcontract under the Department of Defense’s Active Devices Division. Performance must meet exact timeline and logistical standards to support defense-related operations, with all tasks aligned to ensure uninterrupted supply chain flow despite cross-border complexities. The solicitation closed on July 31, 2026, and was posted on July 28, 2026, with no set-aside designated for small or disadvantaged businesses.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 21 hours ago

DEADLINE

Specialized Electronics Packaging and LabelingThe contract requires the provision of ESD-safe packaging, hazardous material labeling, and DoD-compliant marking for semiconductor components, all in strict adherence to IPC, JEDEC, and OSHA industry standards. The work involves ensuring that all packaging materials protect sensitive electronics from electrostatic discharge while simultaneously meeting federal requirements for the identification and handling of hazardous substances. Marking must conform to Department of Defense specifications to ensure traceability, compliance, and operational readiness across military supply chains. Performance of this subcontract is located in West Bath, Maine, with a zip code of 04530, and the NAICS code 334511 classifies it under Semiconductor and Related Device Manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of July 31, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The contracting activity falls under the Active Devices Division of the Department of Defense, emphasizing the critical nature of the components and the need for precision and regulatory compliance in all packaging and labeling processes.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

Quality Inspection and QPL Compliance VerificationThe contract requires third-party inspection and documentation to confirm that electrical backshells comply with the Qualified Products List (QPL) requirements and SAE AS85049 standards before delivery. This verification is critical to ensure that the components meet the stringent technical and quality benchmarks mandated by the Department of Defense, specifically under the ACTIVE DEVICES DIVISION. The scope centers on independent validation of product conformance, with documentation serving as formal evidence that all assemblies have been tested and certified in accordance with established aviation and defense specifications. Performance is required at Elizabeth City, North Carolina, with a zip code of 27909-5004, indicating the physical location where inspections and related documentation activities must be completed. The contract is classified as a subcontract under NAICS code 541330, which pertains to engineering services, suggesting the work involves technical evaluation and not manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, leaving a two-week window for qualified vendors to submit proposals. The contract does not specify any set-aside provisions, meaning it is open to all eligible contractors, and no point of contact details have been provided in the documentation.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Defense-Compliant Packaging, Labeling, and ShippingThe contract requires full compliance with MIL-STD-129 standards for packaging, labeling, and barcoding of defense-related shipments destined for Elizabeth City, North Carolina, with a ZIP code of 27909-5004. All materials must be prepared with traceable freight shipping systems to ensure complete visibility and accountability throughout the transportation process. The terms are FOB Origin, meaning the responsibility for the goods transfers to the recipient once they leave the supplier’s facility, and the contractor must handle all logistics up to that point. The NAICS code 493190 indicates this is a transportation and warehousing activity, emphasizing the critical role of logistics execution. The submission window closes on August 12, 2026, and the opportunity is structured as a subcontract under the Department of Defense’s Active Devices Division.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Qualified Electrical Backshell Manufacturing & SupplyThe contract calls for the manufacture or supply of three qualified electrical backshells identified by NSN 5935-01-613-9813, which must fully comply with the SAE AS85049F Rev F and SAE AS85049/78C Rev C technical specifications and be listed on the Qualified Products List for FSC 5935. The items are intended for military use and require strict adherence to aerospace and defense industry standards to ensure reliability and performance under operational conditions. The solicitation is structured as a subcontract under NAICS code 335931, indicating specialized electronic component manufacturing, and is managed by the Active Devices Division of the Department of Defense. The response deadline is set for August 12, 2026, with the solicitation posted on July 28, 2026, providing a sixteen-day window for submissions. The place of performance is specified as Elizabeth City, North Carolina, with a zip code of 27909-5004, indicating the physical location where deliverables may be required to be shipped or inspected. The contract opportunity is accessible via the DIBBS portal, and while no set-aside type or point of contact is provided, the procurement is explicitly tied to Defense Department sourcing requirements for mission-critical electrical interface components.

Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Electrical Cable Clamp SupplyThe contract calls for the supply of 200 units of electrical cable clamps identified by NSN 5935-01-346-2986, with full compliance to Department of Defense technical standards including MIL-STD-129 for labeling and OSHA hazard communication requirements. The procurement is structured as a subcontract under NAICS code 335999, managed by the Active Devices Division of the Department of Defense. All delivered items must meet specified military specifications and be prepared for delivery to the place of performance in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 28, 2026, and responses must be submitted by August 10, 2026, with the official interface for submissions accessible through the DIBBS platform using the provided link.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Transportation and Delivery Logistics (Domestic/Sea)The contract requires the safe and compliant transport of packaged defense connectors to DLA Distribution in New Cumberland, Pennsylvania, with strict adherence to DFARS 252.247-7023 for both sea and domestic freight movements. All logistics operations must ensure end-to-end tracking of shipments and implement CUI-secure data handling protocols to protect sensitive information throughout the transportation process. The work falls under NAICS code 484121, indicating a focus on truck transportation, with execution likely involving coordination between marine and land-based carriers to meet delivery requirements. The solicitation is classified as a subcontract and was posted on July 28, 2026, with a mandatory response deadline of August 10, 2026. Performance is centered at the New Cumberland location with a ZIP code of 17070-5002, and the contracting activity is under the Department of Defense’s Active Devices Division. Although specific point of contact details are not provided, compliance with federal defense logistics standards and secure data management procedures is non-negotiable, making operational proficiency in protected handling and real-time shipment visibility essential for any proposer.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 21 hours ago

DEADLINE

Packaging, Labeling, and Hazardous Materials Handling ServicesThe contract requires specialized packaging, labeling, and hazardous materials handling services for defense components, with strict adherence to MIL-STD-129, ASTM D3951, and federal hazardous materials transportation regulations. All work must ensure the safe, compliant, and secure preparation of sensitive military hardware for transport and storage, with a focus on standardized procedures for identification, containment, and documentation. The performance location is firmly established at New Cumberland, Pennsylvania, with zip code 17070-5002, indicating the operational focus is centered on this defense logistics hub. This is a subcontract awarded under NAICS code 561910, which categorizes it as other support services for transportation. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is managed by the Active Devices Division of the Department of Defense. While no set-aside status or specific point of contact is provided, the requirement underscores the critical nature of compliance in defense supply chain logistics, particularly where classified or hazardous materials are involved. The full solicitation details may be accessed via the provided DIBBS link.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Dummy Connector Manufacturing & SupplyThe contract requires the manufacture and supply of 13 units of a DUMMY CONNECTOR, REC with National Stock Number 5935017335760, fully compliant with military and federal standards for packaging, labeling, and hazardous materials handling. All deliverables must meet precise technical and regulatory requirements to ensure compatibility with defense systems and safe logistics operations. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the product must be delivered or where fulfillment activities will occur. This is a subcontract under the NAICS code 334210, which pertains to electronic component and accessory manufacturing, and is managed by the Active Devices Division of the Department of Defense. The solicitation was posted on July 28, 2026, with a required response deadline of August 10, 2026. Although no specific set-aside classification or point of contact is provided, the contract remains active through the DIBBS platform, and all proposers must adhere to the outlined military specifications regarding product quality, documentation, and handling procedures to qualify for award.

Telephone Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE