Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electronics Component Supply – Fixed Electrolytic Capacitor

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply and delivery of a fixed electrolytic capacitor identified by NSN 5910-01-629-7620, manufactured to meet strict military specifications and packaged in accordance with Defense Logistics Agency standards. The component must also adhere to all required government marking protocols to ensure traceability, compliance, and interoperability within military systems. This is a subcontract under the NAICS code 334418, issued by the Active Devices Division of the Department of Defense, with performance required to be delivered to FPO, ZIP 96607. The solicitation was posted on July 30, 2026, and response submissions are due by August 10, 2026, with no set-aside provisions applied. All bids must fulfill the technical, packaging, and marking requirements established by military standards to be considered for award.

General Info

Supply of military-grade capacitor NSN 5910-01-629-7620 to FPO 96607 by August 10, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

FPO, AP, 96607, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of a fixed electrolytic capacitor (NSN 5910-01-629-7620) compliant with military specifications, DLA packaging, and government marking standards.

Similar Contracts

Same NAICS industry code

ELECTRONIC MODULE, S

Solicitation # SPE7MX-26-R-X025

The solicitation for ELECTRONIC MODULE, S with NSN/Part Number 5963-01-590-2418 is issued under SPE7MX-26-R-X025 and is posted on DIBBS with a response deadline of August 11, 2026. The official product identifier (PID), referenced as Attachment 2, governs the exact technical requirements and must be used for all quotations, superseding any other descriptions or information provided alongside the request. This PID becomes a binding part of any resulting contract and cannot be altered unless formally amended by the Contracting Officer. The solicitation includes only one item with specified part number and source control drawing references, and the item may carry unique attributes such as special quality codes or restrictions that must be fully understood and complied with by offerors. The contracting activity is under the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, and the place of performance and point of contact information are not specified in the provided data. The solicitation remains accessible until it is removed from DIBBS or amended.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 18 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAC4

The government intends to award a sole-source contract to Electric Boat Corporation for the repair of a specific circuit card assembly identified by NIIN 7H-5998-015491005 and part number 263514106-0005, used in submarine engine and diesel systems. This part is critical and only available from the original equipment manufacturer due to proprietary data restrictions, with no alternative sources or drawings available to support production or repair by other vendors. Two delivery locations are specified—New Cumberland, Pennsylvania and Tracy, California—each requiring three units to be delivered under the same NIIN and part number, and UID labeling requirements apply. The procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and is classified as an emergency acquisition. The contract duration is one year, with Buy American provisions applicable and performance governed by FAR Part 15 procedures, excluding commercial item acquisition policies. All proposals must be submitted electronically through NECO, with no hard copies or phone inquiries accepted. The solicitation is scheduled for release on August 1, 2026, with responses due by September 1, 2026, and an anticipated award date of September 16, 2026. The solicitation number is N0010426QYAC4, and the NAICS code is 334412, though the set-aside designation is listed as a total small business set-aside despite the sole-source nature of the procurement. Interested parties have 15 days from the notice to propose commercial item alternatives, but any non-approved source must submit a Source Approval Request without delaying the process. The point of contact for capability submissions is Jessica Grzywna of NAVSUP WSS Mechanicsburg, and all correspondence must be via email. Options may be added to the contract, and the acquisition will proceed without competition despite the general solicitation window extending to 45 days after publication, as no other suppliers can meet the Government’s unique requirements.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

Cabinet Interface Device Supply (Click Series)The contract pertains to the supply of Click-series cabinet interface devices, including models such as Click 600, 65x, and 202, which are designed for integration with CTAD control systems installed within traffic signal cabinets. These devices serve as critical components for enabling communication and control functions within Texas Department of Transportation’s traffic management infrastructure. The solicitation is structured as a subcontract and is open for responses until August 13, 2026, with the opportunity posted on July 30, 2026. The North American Industry Classification System code 334418 indicates the procurement falls under the category of other electronic component manufacturing. Performance of the contract is expected to support statewide transportation operations, though specific locations for placement are not detailed. The solicitation is managed through the Texas Department of Transportation’s procurement portal, with no set-aside provisions or additional organizational classifications indicated.

Texas Department Of Transportation

POSTED

DEADLINE

ESD-Compliant Packaging and AssemblyThe contract requires the packaging and assembly of microcircuit assemblies and electronic components using materials compliant with Electrostatic Discharge (ESD) protection standards, adhering strictly to military specifications including MIL-PRF-81705, MIL-DTL-117, and MIL-STD-2073-1E. All packaging must provide adequate cushioning and preservation to ensure the integrity of sensitive electronic components during handling and transit. The work is to be performed at the specified location in Columbus, Ohio, with a zip code of 43213, and is classified as a subcontract under NAICS code 334418. The solicitation was posted on July 30, 2026, with a firm deadline for responses on August 10, 2026. The contracting authority is the Department of Defense through the Maritime Supply Chain ESOC Buys organization, indicating this effort supports defense logistics and supply chain requirements for critical electronic systems.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Commercial Off-The-Shelf (COTS) Electronic Component SupplyThe contract involves the procurement and delivery of a single sensitive electronic switch identified by the National Stock Number 5930016656282, to be supplied as a Commercial Off-The-Shelf component in full compliance with military specifications and standardized packaging requirements. The item must meet stringent defense-grade performance and reliability standards, ensuring suitability for critical military applications. The solicitation is classified as a subcontract under NAICS code 334418 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Tracy, California, 95304-5000. The opportunity was posted on July 30, 2026, and responses are due by August 10, 2026. The contract does not specify any set-aside status, indicating eligibility for all qualified vendors. Although no point of contact is listed, interested parties must submit proposals through the official DIBBS platform via the provided link. All submissions must adhere to federal and DoD procurement protocols, with emphasis on traceability, documentation, and conformity to approved military standards for sensitive electronic components.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supplier of Proximity Switches and Electronic ComponentsThe contract solicits suppliers to provide proximity switches and other electronic components that meet stringent military specifications and Defense Logistics Agency standards, ensuring compatibility and reliability for defense applications. All submitted products must align with the NAICS code 334418, which categorizes the manufacturing of electronic components for military use, and performance is required at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity is structured as a subcontract under the Department of Defense’s Electrical Devices Division, with a response deadline set for August 10, 2026, and the solicitation was posted on July 30, 2026, providing potential vendors with a 12-day window to prepare and submit proposals. Suppliers must be prepared to demonstrate compliance with all technical and regulatory requirements established by DLA and military protocols without deviation.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of NSN 5340-01-377-3335 (Electronic Component)The contract involves the procurement and delivery of twenty-one units of a specific electronic component identified by the National Stock Number 5340013773335, requiring full compliance with all packaging, labeling, and shipment standards stipulated by the Department of Defense. The items must be delivered to DLA Distribution in San Diego, with the designated zip code 92136-3581 serving as the point of performance. The solicitation is structured as a subcontract under the NAICS code 334418, indicating classification within the electronic component manufacturing sector. All bids must be submitted by the deadline of August 10, 2026, with the opportunity posted on July 30, 2026, through the DIBBS platform. The contracting entity is the Land Supply Chain under the Department of Defense, and no set-aside designation or specific organization type is specified, leaving the contract open to eligible subcontractors meeting the technical and logistical requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Push Switch Manufacturer or DistributorThe contract requires the manufacture or supply of four units of a push switch that must fully comply with military specifications for packaging, marking, and hazardous materials handling, ensuring all regulatory standards are met for defense applications. Delivery is mandated to the Defense Logistics Agency warehouse located in Tracy, California, with the zip code 95304-5000 specified as the official point of receipt. The work falls under the NAICS code 334418, indicating classification within electronic component manufacturing, and is listed as a subcontract opportunity under the Department of Defense’s Electrical Devices Division. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, providing a narrow window for submission. No set-aside provisions or specific organizational type requirements are indicated, leaving the opportunity open to eligible suppliers regardless of business size or category, provided they meet the technical and compliance demands of the military-grade switch.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of ESD-Sensitive Electronic Connector (Adapter, Connector)The contract requires the supply and delivery of 13 units of an ESD-sensitive electronic connector identified by NSN 5935016942814, specifically an adapter connector designed for use in sensitive electronic systems. All units must adhere to strict Department of Defense packaging and marking standards, including MIL-STD-129 for labeling and DLA-compliant packaging protocols to ensure safe handling and traceability throughout the logistics chain. The items are subject to destination inspection to confirm conformance to technical and compliance requirements prior to acceptance. The solicitation is issued as a subcontract under the NAICS code 334418, which pertains to other electronic component manufacturing, and is managed by the Active Devices Division under the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. All submissions must meet the specified technical, packaging, and inspection criteria to be considered eligible for award.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Film Resistors (Commercial Off-The-Shelf Electronic Components)The contract calls for the procurement and delivery of 30 units of a fixed film resistor identified by National Stock Number 5905011748733, a commercial off-the-shelf electronic component essential for use in defense systems. The supplier is required to comply with stringent military packaging standards, accurate hazardous materials labeling, and cybersecurity protocols to ensure compatibility and safety in secure military applications. All units must originate from verified COTS sources and meet technical specifications for performance and reliability under operational conditions. The solicitation is issued under the Department of Defense’s Active Devices Division with a place of performance in Tracy, California, 95304-5000. It is classified as a subcontract and was posted on July 30, 2026, with a response deadline of August 10, 2026. The North American Industry Classification System code 334418 indicates the sector related to other electronic component manufacturing. Suppliers must adhere to all regulatory and security requirements without exception, as failure to comply may result in rejection of the bid or non-compliance penalties. The contract is open to eligible vendors through the DIBBS system under solicitation reference SPE7M526T360Z.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Precision Resistor Supply (Variable/W Type)The contract calls for the supply of seven units of variable resistors with the National Stock Number 5905005238304, specifically designed to meet rigorous military packaging, labeling, and hazardous materials handling requirements. These components must be delivered in full compliance with defense-grade standards to ensure operational reliability and safety in military applications. The solicitation is categorized as a subcontract under NAICS code 334418 and is issued by the Active Devices Division of the Department of Defense, with performance required at Tracy, California, ZIP Code 95304-5000. The opportunity was posted on July 30, 2026, and responses are due by August 10, 2026, with all submissions expected to align with the technical and regulatory benchmarks set by federal defense procurement protocols.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of TO-220 Insulators (NSN 5999015637262)The contract calls for the procurement and delivery of 283 pallets, totaling 2,830 units of TO-220 insulators, all of which must comply with military specifications and DLA packaging standards. The item is identified by NSN 5999015637262 and is categorized under NAICS code 334418, indicating its classification within the electronic component manufacturing sector. The solicitation is issued as a subcontract under the Active Devices Division of the Department of Defense, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. All deliveries must be completed by the response deadline of August 10, 2026, with proposals due by that date and time, following the specific packaging and compliance requirements mandated by DLA to ensure interoperability and readiness for military use.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

SLEEVE, LOCKING, ELEC

Solicitation # SPE7M5-26-Q-0819

The contract pertains to the procurement of six locking sleeves for electrical connectors, identified by the NSN 5935-01-666-8618, under solicitation number SPE7M5-26-Q-0819. The supply is priced on a firm fixed price basis with no tolerance for quantity variance, and delivery is required within 125 days after award. Inspection and acceptance occur at the destination, with the point of origin as the FOB location. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards; non-hazardous materials must be packaged in accordance with ASTM D3951, while hazardous materials require adherence to TQ requirement IP025 as defined by FED-STD-313. All packaging and labeling must follow MIL-STD-129 specifications, and palletization must meet DLA Packaging Requirements for Procurement (RP001). The item is to be delivered to a U.S. military address in Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLAD Procurement Notes C19 and C20. The shipment is identified with RDD 777 and tied to project 9AL TP 2. The unit of issue is each, and the contract mandates compliance with all applicable DLA standards, including correct marking, labelling, and documentation. The point of contact for the acquisition is Karen Collins of the Department of Defense’s Active Devices Division, with a response deadline of August 15, 2026, and a posted date of July 31, 2026. The material need date is July 23, 2026, and the NSN is linked to a specific purchase request with internal government tracking identifiers.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, E

Solicitation # SPE7M5-26-Q-0808

The contract specifies the procurement of two electrical receptacle connectors under NSN 5935-01-494-0348, with a firm fixed price and zero variance in quantity. The item must comply with military specification MIL-DTL-38999N Revision N dated 09/14/2023 and MIL-DTL-38999/24J Revision J dated 08/11/2022, and is subject to qualification requirements under the Qualified Products List for Federal Stock Class 5935. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is strictly prohibited unless approved in writing by the contracting officer, though this restriction does not apply to commercial items as defined in FAR 11.001. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government facility at Picatinny Arsenal, New Jersey, with delivery due 125 days after contract award. Inspection and acceptance occur at destination, and the contractor is required to comply with configuration change management procedures and any engineering change proposals. The procurement is part of a federal solicitation issued by the Department of Defense, with a response deadline of August 8, 2026, and a required delivery date of June 23, 2026.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-337C

The contract solicitation SPE7M5-26-T-337C calls for the procurement of 73 units of a critical application hose clamp made from aluminum alloy band material with a t-bolt steel alloy and self-locking nut, featuring an 8.25-inch nominal inside diameter and 0.62-inch nominal width. The item is identified by NSN 4730-00-439-2933 and is supplied under two vendor part numbers: Eaton Aeroquip LLC P/N 321-62-825S and V I J Corp P/N U11-62-825S. Delivery is required within 81 days of award, with FOB origin terms and inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The unit price is set at $73.00 per unit, totaling $5,329.00 for the full quantity, with zero variance allowed in quantity. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including palletization under RP001 and labeling per MIL-STD-129, which mandates proper marking with unit of issue and quantity per unit pack, along with barcoding for traceability. Hazardous material labeling must align with 29 CFR 1910.1200, and all supplies must be free of government identification if non-accepted. The contract incorporates multiple FAR and DFARS clauses including those related to small business representation, employment equity, trafficking in persons, hazardous materials identification, sustainable products, and transportation by sea, with specific adherence to NIST SP 800-171 DOD assessment requirements. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 5, 2026, and must include required representations regarding unique entity ID and CAGE codes, small business status, and compliance with defense telecommunications equipment disclosures. Payment will be processed through WAWF, and the contracting officer retains full authority to determine contract type and insert specific details not currently completed in the solicitation.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

ADAPTER, CONNECTOR

Solicitation # SPE7M5-26-Q-0805

The item is an adapter connector with NSN 5935-01-471-9077, totaling 91 units under purchase request 7017601636, with a delivery timeline of 121 days ADO. This technical item contains data subject to U.S. export control regulations, including ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—constitutes an export requiring prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export-controlled data training and questionnaire, and have received formal approval from DLA to handle such data. The solicitation number is SPE7M5-26-Q-0805, posted on July 31, 2026, with responses due by August 15, 2026, under NAICS code 335931. The procurement is managed by the Department of Defense’s Active Devices Division, with performance at Cherry Point, North Carolina, and primary point of contact is Barbara Hoffmann, reachable via email and phone provided.

Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

FILTER, RADIO FREQUE

Solicitation # SPE7M5-26-T-336P

The contract pertains to the procurement of a Radio Frequency Interference Filter identified by NSN 5915-00-726-7326 and part number 46438-1, with a quantity of 16 units to be delivered to Tinker AFB, Oklahoma. Delivery is required within 50 days after the need ship date of September 20, 2026, with an original required delivery date of September 12, 2027, under FOB Origin terms. All items must be packed in compliance with DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951; hazardous materials must follow TQ IP025 per FED-STD-313, while non-hazardous items require commercial packaging per ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129, including proper Unit of Issue and Quantity per Unit Pack specifications, and palletization must conform to RP001. The contract mandates CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment and compliance with FAR clauses including 52.227-1 Alt I and II for government authorization, 52.223-3 for hazardous material identification, and 52.240-93 for safeguarding covered contractor information systems, all under deviation 2026-00038. Invoicing must be submitted via WAWF only, with payment administered through a designated DoDAAC referenced in the award document. Inspection and acceptance occur at the destination point, and the government retains full authority over acceptance criteria, which are governed by referenced military and industry standards. The solicitation requires offerors to provide their UEI and CAGE code if they represent as providing covered defense telecommunications equipment or services, and must self-certify their small business status or socioeconomic classifications including 8(a), HUBZone, SDVOSB, WOSB, or EDWOSB. While no formal evaluation factors or award basis are stated, the procurement is managed through the DIBBS portal under DLA’s automated simplified acquisition framework, with proposals due by August 5, 2026. The contract does not specify total value due to incomplete pricing data in Section B, though historical procurement references indicate prior unit prices in similar transactions.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-Q-0814

The contract specifies the procurement of 50 electrical plug connectors with NSN 5935-00-823-0367 under solicitation SPE7M5-26-Q-0814, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is qualified and must conform to the Qualified Products List for Federal Stock Class 5935, with configuration changes subject to Engineering Change Proposal and variance request processes. The connector must comply with SAE AS50151 Revision E dated June 1, 2020, and is designated as a critical application item, necessitating full conformance to performance and safety criteria. The use of ozone-depleting substances is strictly prohibited without written approval from the Contracting Officer, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and procedures outlined, and no special marking is required. Sampling and inspection methods must align with MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise specified, and unspecified attributes are treated as major. Delivery is FOB origin with a firm fixed price and zero variance tolerance, and the item must be delivered within 90 days after award to the designated DLA distribution center in Tracy, California. The contract prohibits substitution of approved sources without documented manufacturer authorization and pre-award approval, and all materials must comply with hazardous materials shipping guidelines per DLAD Procurement Notes. Pricing is fixed, and the item is intended for federal government use with a required ship date of December 23, 2026.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M5-26-Q-0816

The contract specifies the procurement of 197 units of a backsheel for an electrical connector with NSN 5935-01-225-5386, classified as a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The item must conform to SAE AS85049F Revision F dated April 1, 2021, and the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, and this prohibition applies regardless of referenced military or federal specifications. The item is designated as a critical application item and must be packaged in accordance with DLA Packaging Requirements, marking and labeling in compliance with MIL-STD-129, and palletization as specified under RP001. If deemed hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA requirements take precedence. The contract is firm fixed price with zero variance in quantity, and delivery is due within 100 days after date of award, with inspection and acceptance occurring at destination. The item is to be shipped to DLA Distribution Jacksonville, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-Q-0816, with a response deadline of August 15, 2026, and the material is needed by January 26, 2027.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONNECTOR BODY, PLUG

Solicitation # SPE7M5-26-U-0051

The contract is for the procurement of a CONNECTOR BODY, PLUG with NSN 5935014449281 under an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency’s Active Devices Division. The solicitation, numbered SPE7M5-26-U-0051, was posted on July 16, 2026, with a response deadline of July 31, 2026, and is set aside exclusively for Women-Owned Small Businesses under NAICS code 334417. The estimated quantity is five units at a unit price of $5.00, with no guaranteed minimum order but a contract ceiling of $350,000.00, and delivery is required within 104 days of award, FOB Origin. Inspection and acceptance occur at the destination, with compliance standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, and all packaging must adhere to DLA’s RP001 requirements. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional uses such as batteries, sensors, or medical instruments, and portable devices containing mercury must have a secondary containment barrier compliant with NAVSEA 5100-003D. All contractors must comply with a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering employment equity, human trafficking prevention, employment eligibility verification, sustainable products, hazardous materials handling, export controls, electronic invoicing via WAWF, cybersecurity safeguards including NIST SP 800-171, and prohibitions on hexavalent chromium and certain Chinese military companies. Offerors must provide their Unique Entity Identifier and CAGE code, certify their small business status, and disclose any participation in joint ventures or provision of covered telecommunications equipment as required by 252.204-7016 and 252.204-7017. Special requirements include hazard communication labeling per OSHA standards, restrictions on foreign-flagged vessels for ocean transport, and mandatory notification of potential safety issues. Proposals must be submitted electronically through the DLA-BSM Internet Bid Board System by the stated deadline, with no physical submissions permitted, and failure to meet any technical, packaging, or regulatory requirement will result in rejection. Long-term contract performance requires recertification

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, E

Solicitation # SPE7M5-26-Q-0815

The contract specifies the procurement of an electrical receptacle connector with NSN 5935-01-412-1961 and part number MS17346R36N52P, meeting technical requirements defined by MIL-DTL-22992H(4) Supplement 1 and referenced specification MS17346F. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935, and manufacturing by Amphenol, Matrix, or Pyle National with lot date codes between July 2006 and June 2016 is strictly prohibited. Traceability documentation may be required to verify manufacturing origin and dates. The product must be free of intentional mercury or mercury-containing compounds except in specified exempted applications such as certain batteries, instruments, or weapon systems, and any portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances in any phase of manufacturing or processing is prohibited without written contracting officer approval. The connector is designated a critical application item, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Palletization follows DLA packaging requirements, with no special marking required. Delivery is due in two shipments of 13 and 11 units respectively, 167 days after award, with firm fixed pricing, zero quantity variance, and destination-based inspection and acceptance. FOB is origin, and all shipments are directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M5-26-Q-0815, with responses due by August 15, 2026, and deliveries scheduled for April and November 2026.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

PLATE, ELECTRICAL SHIEL

Solicitation # SPE7M5-26-Q-0813

The contract pertains to the procurement of 11 units of a Plate, Electrical Shield identified by NSN 5999-01-347-4699 under solicitation SPE7M5-26-Q-0813, with a firm fixed price and zero variance allowed in quantity. Delivery is required within 100 days after award, with inspection and acceptance occurring at the destination. The item must comply with referenced technical drawings and specifications, including revisions dated 2021, 2022, and 2023, and must meet all requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards. The supplier must adhere to stringent packaging directives per RP001 and MIL-STD-129, with hazardous materials following FED-STD-313 and IP025, while non-hazardous items must comply with ASTM D3951 unless overridden by DLA requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero defects expected unless otherwise stated, and critical attributes require verification levels VII, IV, and II. The product must be marked as specified under RQ017 and managed under configuration control via engineering change procedures. Compliance with CMMC Level 2 cybersecurity self-assessment is mandatory, and the use of ozone-depleting substances is prohibited without written approval from the contracting officer. All packaging and labeling must be properly marked and palletized as directed, with delivery addressed to DLA Distribution at the New Cumberland, PA facility. The item is not eligible for commercial item exemptions and is subject to full government oversight throughout the supply chain.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

SHELL, ELECTRICAL CO

Solicitation # SPE7M5-26-T-337E

The contract under SPE7M5-26-T-337E involves the procurement of shell, electrical components identified by NSN 5935011318012, with a total quantity of 196 TE units, where each TE unit consists of 10 individual items packaged together. Delivery is required within 38 days after the date of order, with a firm delivery target of September 8, 2026, and shipment must be made FOB origin, meaning the contractor bears all costs and responsibilities up to the point of shipment from their facility. The government will inspect and accept the items at the destination, specifically at DLA Distribution Warner Robins, Building 376, Robins AFB, GA. Packaging must strictly conform to MIL-STD-2073-1E, including preservation methods that require items to be clean and dry without additional preservation, wrapping, or cushioning materials; marking must adhere to MIL-STD-129 with no special marking codes applied. The unit of issue is TE, and the contract specifies that the Government’s authorized unit of issue must be used, with a corresponding ANSI X12 unit of issue to be referenced for system alignment. The contract imposes stringent material restrictions, notably prohibiting the intentional inclusion of mercury or mercury-containing compounds in supplied hardware or materials, with limited exceptions for functional uses in batteries, fluorescent lamps, necessary instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Multiple FAR and DFARS clauses govern compliance, including requirements for hazardous materials handling, cyber incident reporting under 252.204-7012, safeguarding covered defense information, prohibition of hexavalent chromium, trafficking in persons, employment eligibility verification, and electronic invoicing exclusively through WAWF. Contractors must maintain active SAM registration, provide a UEI and CAGE code, and may be required to affirm socioeconomic status such as small business, SDVOSB, or HUBZone. The contract is fixed-price, with no price variance allowed and no options identified; while pricing details are listed, the unit price field is inconsistent with expected values and no extended total is provided, rendering the exact contract value indeterminate. Technical and quality requirements are incorporated by reference from the DLA Master List, accessible via

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

MOUNTING PAD, ELECTR

Solicitation # SPE7M5-26-Q-0807

The contract specifies the procurement of nine mounting pads for electrical-electronic components, identified by NSN 5999-01-647-8284, under solicitation SPE7M5-26-Q-0807, with a response deadline of August 15, 2026, and a required delivery date within 90 days of award. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity requirements mandate that the vendor be certified as a CMMC Level 2 C3PAO, and the technical data associated with the product is controlled under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. Physical identification of the item must comply with marking requirements, and any non-accepted supplies must have government identification removed. The place of performance is designated as Silverdale, WA, with primary point of contact Barbara Hoffmann, and the procurement is managed by the Department of Defense's Active Devices Division under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE