Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Elevator Preventive Maintenance and Corrective Repair (Iqaluit, NU)

Active

International

Response Deadline09/08/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing code-mandated preventive maintenance and basic servicing for ThyssenKrupp hydraulic passenger elevators at RCMP facilities in Iqaluit, Nunavut. The selected provider must ensure all lubrication, adjustments, and repairs comply with ASME A17.1-2025 and CSA B44 standards, while offering 24/7 emergency call-back services. Deliverables include detailed maintenance reports and quarterly summaries. To qualify, contractors must possess FA2X Escorted Access security authorization and maintain liability insurance of 2 million dollars. This opportunity is issued by the Government of Canada for the Royal Canadian Mounted Police, with a response deadline of September 8, 2026.

General Info

Elevator maintenance for RCMP Iqaluit facilities; requires FA2X clearance and $2M liability insurance.

Agency

Government of Canada → Royal Canadian Mounted PoliceView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Canada, Nunavut Territory, Iqaluit, CAN

Set-Aside

NONE

Documents

This scope was carved out of M5000-25-05409/B.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Elevator Maintenance Services, Iqaluit HQ, Iqaluit, NU

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 12

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 09:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Royal Canadian Mounted Police

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Royal Canadian Mounted Police

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs code-mandated preventive maintenance and basic servicing for prime contractors on RCMP facility projects in Iqaluit, Nunavut. Lubricates, adjusts, and repairs ThyssenKrupp hydraulic passenger elevators per ASME A17.1-2025 and CSA B44 standards. Provides 24/7 emergency call-back services. Requires FA2X Escorted Access security authorization and $2M liability insurance. Delivers maintenance reports and quarterly summaries.

Similar Contracts

Same NAICS industry code

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # CBP5933

Management & Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at the San Diego Job Corps Center in Imperial Beach, California. The project involves installing three 2-ton and three 1.5-ton Payne heat pump systems, including matching indoor air handlers, and requires the removal and disposal of old equipment. The estimated contract value ranges from 25,000 to 100,000 dollars, with a performance period of 30 consecutive business days following the written Notice to Proceed. Bids are due by September 11, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. Eligible bidders include various small business categories, such as SDB, WOSB, HUBZone, and VOSB. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee of at least 20 percent for bids equal to or exceeding 25,000 dollars. The contract is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and federal energy efficiency standards. Additionally, awarded contractors must provide performance and payment bonds, maintain a Unique Entity ID, and adhere to FAR regulations regarding the Buy American Act and combating trafficking in persons. Final payment is contingent upon a successful final inspection and the submission of closeout documents, including certified payroll reports and operation and maintenance manuals.

San Diego Job Corps Center

POSTED

about 6 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. This solicitation, identified as RFQ 7593, is open to various small business designations, including Small Disadvantaged, Women-Owned, Veteran-Owned, Service-Disabled Veteran-Owned, and SBA-certified HUBZone small businesses under NAICS code 238220. Interested bidders must submit their response by September 18, 2026, and are required to provide a bid sheet, completed supplier self-certification and IRS W-9 packets, and proof of insurance. A pre-bid meeting is scheduled for September 11, 2026. The contract mandates strict adherence to federal labor and regulatory standards, including the Service Contract Act and Wage Determination No. 2015-5595 Revision 28 for prevailing wages in Washoe and Storey counties. Key compliance requirements include FAR clauses regarding the prohibition of trafficking in persons, Buy American preferences, and specific security and privacy regulations. Subcontractors with awards exceeding 30,000 dollars must disclose any debarment or suspension status. Payment is based on the submission of complete invoices for accepted materials or services, and all work is subject to inspection by MTC or the government to ensure it is free from defect and fit for its intended purpose.

Sierra Nevada Job Corps Center

POSTED

about 6 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to perform HVAC replacement services for Building E8 Welding at the Clearfield Job Corps Center, located at 20 West 1700 South, Clearfield, Utah. This solicitation, identified as 2026-clearfield-bldg-e8-welding-hvac under NAICS code 238220, is open to various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned small businesses. Bids must be submitted via email by the deadline of September 19, 2026. The project requires adherence to the provided scope of work and compliance with Davis-Bacon wage determination UT20250083 for building construction in Davis County, Utah. Applicants must provide a detailed bid breakout, proof of insurance, professional references, and both bid and performance/payment bonds. Additionally, successful bidders must complete the MTC Supplier Self-Certification and Set-Up Form and provide a current IRS Form W-9 for taxpayer identification and certification. Primary contact for this opportunity is Patricia Willover.

Management & Training Corporation

POSTED

about 6 hours ago

DEADLINE

Joliet JCC Sewer Vent Repairs

Solicitation # Joliet JCC Sewer Vent Pipe Repair

This subcontracting opportunity is issued by Management and Training Corporation for sewer vent pipe repairs at the Joliet Job Corps center located at 1101 Mills Road in Joliet, Illinois. Under NAICS code 238220, the project is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their bids by September 11, 2026, at 3:00 PM CT. The contract requires adherence to the Service Contract Labor Standards as outlined in Wage Determination 2015-5019 Revision 31, which specifies the prevailing wage rates and fringe benefits for the counties of Grundy, Kendall, and Will. Bidders must comply with insurance requirements, indemnification clauses, and FFATA reporting regulations. The primary point of contact for this solicitation is Fran McGraw.

MTC Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

RFQ#3191 Laundry Tray Installations

Solicitation # RFQ#3191

Management & Training Corporation (MTC) is soliciting bids under RFQ#3191 for plumbing subcontracting services at the Charleston Job Corps Center in Charleston, West Virginia. The project requires the provision of all labor, materials, and supervision to remove existing units and install new laundry trays and faucet sets in the Education and Men’s and Women’s CTT restroom areas. Specifically, the contractor must install approximately 25 by 22 inch laundry trays on Everform Graphite Terrazzo Matrix countertops, reconnect them to existing hot and cold water supply lines and drainage systems, and ensure all connections are watertight. The contractor is responsible for testing all fixtures for proper flow and drainage and removing all debris and packaging upon completion. This is a fee-for-service contract awarded on a lump sum basis, with MTC serving as the sole judge of best value. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238220. Bids are due by September 11, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, proof of insurance, three references for similar projects, and a completed supplier packet containing a W-9 and self-certification form. The contract is subject to several federal regulations, including Service Contract Act prevailing wages per Wage Determination 2015-4347 and FAR 52.204-10 reporting for subcontracts valued at 40,000 dollars or more. Additionally, the contractor must comply with the Buy American Act, the Contract Work Hours and Safety Standards Act, and strict Department of Labor guidelines regarding the protection of sensitive and proprietary information. Final inspection and acceptance will be conducted by MTC at the designated point of performance.

Management & Training Corporation

POSTED

about 6 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This contract involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes repairing or replacing deteriorated piping leading into the diverters and upgrading the existing Powers brand systems to Delta or a comparable style with readily available parts. Proposals must be submitted to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM. A site visit is scheduled for September 1, 2026, at 10:30 AM. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220.

Adams & Associates

POSTED

about 6 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The comprehensive scope of work includes the demolition and disposal of the existing chiller, installation and startup of a new air-cooled chiller, and the integration of building automation controls featuring a JACE 9000 central integration point with a graphical user interface. Additionally, the project requires the cleaning and inspection of air handling units, the replacement of three out of four air handler VFDs, and the installation of control valves for four AHUs. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements specify a minimum of 1,000,000 dollars for Commercial General Liability and Comprehensive Automobile Liability, and 500,000 dollars for Employers Liability. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 6 hours ago

DEADLINE

Joliet JCC Grease Pipe Repairs

Solicitation # Joliet JCC Grease Line Repair

This subcontracting opportunity is issued by Management & Training Corp for grease pipe repairs at the Joliet Job Corps located at 1101 Mills Road in Joliet, Illinois. Under NAICS code 238220, the solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Interested parties must submit their response by September 11, 2026, and provide a completed bid sheet, supplier packet, professional references, and proof of insurance. The contract requires strict adherence to insurance and indemnification standards, as well as compliance with the Service Contract Labor Standards. Specifically, contractors must follow Wage Determination No. 2015-5019 Revision 31 for the state of Illinois, ensuring that all labor categories are paid the required fringe benefits and occupational wage rates for Grundy, Kendall, and Will counties. Additionally, the agreement includes standard termination terms and requires FFATA reporting.

MTC Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

RFQ#8911 Fire Suppression System Repairs

Solicitation # CBP#8911

Management & Training Corporation is seeking a subcontractor for RFQ 8911 to perform fire suppression system repairs at the Edison Job Corps Center in Edison, New Jersey. This fixed-price, single lump sum contract involves critical repairs across three areas: the Culinary Building, where fire backflow preventer assemblies must be repaired; the Women's Dormitory, requiring the replacement of deteriorated sprinkler piping with pinhole leaks; and the Wellness Center. All work must comply with NFPA standards, state and local fire codes, OSHA requirements, and manufacturer specifications. The award will be based on overall best value, and bidders must complete a physical site visit and sign an attendance roster to be considered. The opportunity is open to various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238220. For bids of $25,000 or more, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. The project is subject to Construction Wage Rate Requirements, necessitating weekly certified payroll reporting in accordance with the New Jersey General Decision NJ20250036. Final acceptance is contingent upon a successful inspection by center staff and the submission of a Notice of Final Completion, release of liens, and two sets of operation and maintenance manuals.

Management & Training Corporation

POSTED

about 6 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02, managed by PTSI Managed Services Inc. for the FAA, involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the FSS chiller, four AC units, and chilled-water piping, along with the associated electrical systems. Key requirements include modifying Panel P1 and HVAC circuits, providing temporary and redundant cooling during the construction phase, and completing all startup, testing, and commissioning activities. The project concludes with FAA training, punch-list completion, and final project closeout. The estimated construction magnitude for this project is between 250,000 and 500,000 dollars, with a proposed start date of April 15, 2027. This opportunity is designated for small businesses, including SDB, WOSB, HUBZone, VOSB, and SDVOSB certifications. The solicitation was posted on September 4, 2026, with a response deadline of September 25, 2026, under NAICS code 238220. Masanori Akers serves as the primary point of contact for this effort.

PTSI Managed Services Inc.

POSTED

about 6 hours ago

DEADLINE

WOJC - Replacement of Condensing Unit and Evaporator Coil – Walk-In Freezer

Solicitation # wojc-replacement-condensing-unit-evaporator-coil-walk-freezer

The Westover Job Corps Center, operated by ETR on behalf of the U.S. Department of Labor, is soliciting quotes for a subcontracting opportunity to decommission and replace a fire-damaged condensing unit and evaporator coil for a walk-in freezer in Chicopee, Massachusetts. The project requires the installation of new, energy-efficient equipment and must be performed by a Massachusetts-licensed electrician and a licensed refrigeration technician in compliance with the 2023 Massachusetts Electrical Code and 780 CMR 13.00 Energy Code. All bids must be submitted by September 11, 2026, and must remain valid for at least 90 days. To be considered for the award, bidders must provide a completed bid sheet with a detailed cost breakdown, a proposed service schedule, and all required Massachusetts licensing and credentials. Essential administrative documentation includes a W-9, Vendor Acknowledgement Form, certificates of liability insurance listing Center/ETR as the holder, and an active SAM.gov registration with a Unique Entity ID. Depending on the project value, performance and payment bonds may be required for contracts exceeding 35,000 dollars. ETR will serve as the sole judge for selection, and the award is not guaranteed to the lowest bidder. Compliance with the Davis-Bacon Act, Service Contract Act, and ETR's Affirmative Action Plan is mandatory.

Westover Job Corps Center

POSTED

about 6 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is seeking qualified New York State licensed contractors for the replacement and installation of HVAC equipment at Main Building No. 1, Wing 5 in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems in designated classrooms, removing a window air-conditioning unit from the computer lab, and abandoning two 5-ton rooftop units in place. Comprehensive associated work includes demolition, roof curb and penetration management, ductwork, refrigerant and condensate piping, electrical installations, controls, structural roof evaluations, and fire alarm and duct smoke detector integration. The selected contractor must ensure all systems are tested, balanced, commissioned, and warranted. Because the center will remain operational during construction, the contractor must coordinate work around facility operations. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. A pre-proposal site walkthrough is scheduled for September 10, 2026, with vendor questions due by September 14 and final proposals due by September 21, 2026, at 4:00 PM ET. The period of performance is 210 calendar days following the written Notice to Proceed.

Adams and Associates, Inc.

POSTED

about 6 hours ago

DEADLINE

More opportunities from Government of Canada → Royal Canadian Mounted Police

Same awarding agency

Request for Information: Office Space in Beechville - Lakeside - Timberlea, Nova Scotia area

Solicitation # X7051-2026-3

The Royal Canadian Mounted Police is issuing a request for information to identify available office space within the Beechville, Lakeside, and Timberlea regions of Nova Scotia. This federal solicitation, identified by number X7051-2026-3, seeks data on suitable properties to support their operational needs in the Halifax area. Interested parties must submit their responses by the deadline of September 25, 2026. The primary point of contact for this inquiry is Melanie Lewell, the Contracting Authority, who can be reached via email for further details regarding the submission process.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Stream 1 : Applications Services

Solicitation # 202606043/A

The Royal Canadian Mounted Police is seeking specialized professional services to support the Federal Technology Solutions group within the Federal Policing Strategic Management branch. The objective is to obtain expert assistance for the troubleshooting, development, and evolution of SharePoint, M365, and PowerApps solutions. Key tasks include migrating from SharePoint 2019 to SharePoint Online, developing solutions using Nintex Forms and Workflow, and providing guidance on industry best practices for the Federal Policing Hub and the Integrated Collaborative Environment tool. This requirement is restricted to qualified TBIPS Supply Arrangement Holders in the NCR region and will result in a single contract. The selected provider must supply one Level 3 Application/Software Architect and two Level 2 Programmer/Software Developers. The contract is proposed for an initial term of two years with a one-year irrevocable extension option, with an estimated effort of 240 days per resource. Security requirements include Enhanced Reliability Status for the corporation and a security level of 3 for resources.

Custom Computer Programming Services

POSTED

DEADLINE

Axon Taser 7 Electrical Testing and CertificationThis subcontract involves the periodic electrical testing and certification of Axon Taser 7 Conducted Energy Weapons for prime contractors supporting Royal Canadian Mounted Police maintenance projects. The service provider is responsible for verifying operational parameters and technical compliance with legislative requirements using calibrated electrical output measurement equipment, ultimately delivering certified reports that confirm the operational status of each unit. The project is managed under the Government of Canada for the Royal Canadian Mounted Police and requires personnel to hold RCMP-approved security clearances. Interested parties must respond by September 16, 2026, for this Canada-based engagement categorized under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Conducted Energy Weapon (CEW) Testing

Solicitation # 202604988/B

The Royal Canadian Mounted Police (RCMP) is seeking a National Individual Standing Offer (NISO) for the electrical testing of Axon Taser 7 Conducted Energy Weapons (CEWs). The primary objective is to ensure these devices maintain ongoing compliance with technical specifications and operational parameters through periodic testing. The standing offer is intended for a five-year term starting January 4, 2027, with the possibility of three additional one-year extensions. This solicitation is open to Canadian suppliers and those from applicable trading partners, with the award being granted to the responsive offer with the lowest evaluated price. To be declared responsive, bidders must meet five mandatory technical criteria: valid ISO/IEC 17025 accreditation, a valid license from the Chief Firearms Officer for on-site CEW storage, a secure calibration laboratory located in Canada, an Electrical Engineering Technologist diploma for the testing resource, and an Electrical Engineer degree for the analysis resource. The contractor must adhere to strict security and shipping protocols, including transporting CEWs without battery packs or live cartridges in opaque, sealed containers labeled as machine tools or parts to maintain confidentiality. All testing must be performed according to Axon Enterprise, Inc. specifications, and the resulting reports will be subject to inspection by the RCMP Project Authority.

Testing Laboratories and Services

POSTED

DEADLINE

All-Terrain Vehicles (ATV) for Nunavut

Solicitation # M5000-27-1814/A

The Royal Canadian Mounted Police (RCMP) is soliciting the procurement of All Terrain Vehicles (ATV) to support police operations in Nunavut, including patrol, interdiction, transport of personnel, and search and rescue. The vehicles must be capable of operating across all terrain types in the region, specifically including frozen remote lakes and rivers. This requirement is exclusively set aside for Inuit firms in accordance with the Directive on Government Contracts in the Nunavut Settlement Area. The selection process is based on the lowest evaluated price, and all initial deliverables must be received by November 30, 2026. Managed by Senior Procurement and Contracting Officer Shahlar Mammadov, the solicitation process includes a final response deadline of September 9, 2026, following previous extensions. Bids must be submitted via email to the RCMP Bid Receiving Unit. The contract adheres to the Ineligibility and Suspension Policy administered by Public Services and Procurement Canada and emphasizes green procurement, encouraging the use of environmentally preferable packaging aligned with the Greening Government Strategy and the Ocean Plastics Charter.

Motorcycle, ATV, and All Other Motor Vehicle Dealers

POSTED

DEADLINE

Technical Support & Maintenance ServicesThe Royal Canadian Mounted Police of the Government of Canada is seeking a subcontractor to provide comprehensive warranty, maintenance, and technical support services for a sonar system. This subcontract falls under NAICS code 811212 and will be performed in New Brunswick. The opportunity was posted on August 31, 2026, with a response deadline of September 15, 2026. Interested parties can find further details and submission guidelines through the CanadaBuys portal.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Software Development & IntegrationThe Royal Canadian Mounted Police, acting under the Government of Canada, is seeking a subcontractor for the development and integration of specialized sonar software. This project focuses on creating a system capable of underwater imaging with critical functionalities including real-time display, GPS integration, data storage, and advanced analysis features. The contract is categorized under NAICS code 511210 and will be performed in New Brunswick. Interested parties must submit their responses by the deadline of September 15, 2026, following the initial posting on August 31, 2026.

Software Publishers

POSTED

DEADLINE

Winch System SupplyThe Royal Canadian Mounted Police, acting under the Government of Canada, is seeking a subcontractor for the supply of a portable winch system. This specialized equipment must include an HD boom kit, shackle, and pulley, specifically designed for underwater recovery operations that can be deployed by a two-person crew. The procurement is categorized under NAICS code 333920 and will be performed in New Brunswick. Interested parties must submit their responses by the deadline of September 15, 2026, at 18:00 UTC, following the initial posting on August 31, 2026.

POSTED

DEADLINE

Supply of Custom Carrying CaseThe Royal Canadian Mounted Police, acting under the Government of Canada, is seeking a subcontractor for the manufacture and supply of a durable, custom carrying case. This equipment must be specifically designed to protect and transport a sonar system and its associated components during field operations. The opportunity was posted on August 31, 2026, with a response deadline of September 15, 2026. The project falls under NAICS code 339999 and the place of performance is located in New Brunswick.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Towed Side Scan Sonar System (Core Hardware)The Royal Canadian Mounted Police is seeking a subcontract for the supply of a complete, turnkey towed side scan sonar system. The required equipment must include the tow fish, transducers, control unit, and necessary software, ensuring full operational capability in both freshwater and saltwater environments. This procurement opportunity is managed by the Government of Canada and will be performed in New Brunswick. Interested parties must submit their responses by September 15, 2026, following the posting date of August 31, 2026.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Towed Side Scan Sonar System

Solicitation # M4500-7-0483

The Royal Canadian Mounted Police (RCMP) Underwater Recovery Team is soliciting bids for the procurement of one towed side scan sonar system, including a carrying case, warranty, maintenance, and technical support services. The system must be capable of operating in both salt and fresh water, as well as in moving and still waters, to detect targets 1.5 meters and larger. Key technical specifications include stainless-steel construction, dual simultaneous frequency operation at 900 and 1800 kHz, an adjustable transducer for shallow water, and a tow fish weighing less than 25 kg. The package must also include an outdoor-rated laptop with Windows 10 or later and software for raw data storage and reporting. Safety requirements mandate a quick-release mechanism on tow cables and a winch system manageable by two people without mechanical assistance. Bids must be submitted via email by September 15, 2026, at 2:00 p.m. Atlantic time. The contract will be awarded to the responsive bidder with the lowest evaluated price, provided they meet all mandatory technical evaluation criteria. All deliverables must be delivered Duty Paid to Bathurst, New Brunswick, on or before January 31, 2027. This procurement strictly enforces environmentally preferable packaging standards, requiring materials to be reusable, returnable, or recyclable. Bidders must provide a technical bid substantiating compliance with all requirements and a separate financial bid.

POSTED

DEADLINE

Commercial Accommodations – Innisfail, AB

Solicitation # M5000-26-1546/A

The Royal Canadian Mounted Police requires commercial accommodation services for participants attending training sessions at the Police Dog Service Training Centre in Innisfail, Alberta. This procurement is established as a standing offer with an anticipated start date of December 1, 2026, for an initial term of two years, including an irrevocable option to extend for up to two additional one-year periods. Up to two contracts may be awarded based on a trade-off evaluation where the highest combined rating of technical merit (40%) and price (60%) determines the award. To be responsive, bidders must meet all mandatory criteria, including providing accommodations in a permanent commercial property within 45 km of the training centre with a minimum 3-star Canada Select or 3-diamond CAA/AAA rating. The solicitation is open to Canadian suppliers and applicable trading partners, with specific provisions for Indigenous businesses under the Procurement Strategy for Indigenous Business. Key operational requirements include 24/7 front desk service, secure parking, and electronic security systems. Bidders must submit their proposals via email in three separate PDF sections covering technical, financial, and certification requirements, ensuring total attachments do not exceed 5MB. The contract is administered by Sheena Simonson and requires quarterly usage reporting by the supplier to track call-up values and accumulated totals.

Hotels (except Casino Hotels) and Motels

POSTED

DEADLINE