Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

EMERGENCY POWER OUTAGE/NEED 3 POLE TRANSFORMERS

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of the Navy, through Navfac Mid-Atlantic, has issued a forecast for the emergency procurement of three pole transformers to address a power outage. This requirement is designated as an 8(a) Sole Source set-aside under FAR 19.8, indicating that the contract is intended for a certified 8(a) small business. The notice was posted on July 2, 2026, to signal an urgent need for equipment to restore electrical services. Further details regarding the specific technical requirements and performance location are managed through the Secretary of the Navy's small business portal.

General Info

Navy emergency 8(a) sole source procurement for three pole transformers to restore power.

Agency

Department Of The Navy → Navfac Mid-AtlanticView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

8AN

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 2

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navfac Mid-Atlantic

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → Navfac Mid-Atlantic

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

EMERGENCY POWER OUTAGE/NEED 3 POLE TRANSFORMERS

Similar Contracts

Same NAICS industry code

61--TRANSFORMER,POWER

Solicitation # SPE7M126T299N

DLA Land And Maritime

POSTED

DEADLINE

59--TRANSFORMER,POWER

Solicitation # SPE7M126T297K

DLA Land And Maritime

POSTED

DEADLINE

61--POWER SUPPLY

Solicitation # SPE7M126T298P

DLA Land And Maritime

POSTED

DEADLINE

Replace, Retrofit, and Install PG LifeLink Isolation Monitors Sole Source

Solicitation # 36C26126Q1199

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

61--SWITCHING UNIT,POWER T

Solicitation # SPE7M126T300P

DLA Land And Maritime

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC / NSN: 6150-01-194-1219 / P/N: 10274508

Solicitation # SPRRA226Q0060

The solicitation seeks bids for a cable assembly identified by specification and NSN 6150-01-194-1219 with part number 10274508, under a Small Business Set Aside as a total set-aside, meaning only small businesses are eligible to compete. The NAICS code 335311 indicates the contract falls under the category of wiring device manufacturing. The opportunity was posted on August 7, 2026, and responses must be submitted by 9:00 PM EDT on August 21, 2026. The contracting activity is managed by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with the Department of Defense as the overarching agency. All performance and delivery obligations will be fulfilled at the specified location in Redstone Arsenal. The primary point of contact for inquiries is Delora Crutcher, reachable via email, with Michael Romine available as a secondary contact. Interested vendors can access additional details through the provided SAM.gov link.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Overhead Transformers Master Agreement

Solicitation # 20260819002

City of Anaheim Public Utilities Department

POSTED

DEADLINE

61--CABLE ASSEMBLY,SPEC

Solicitation # N0010426QNA17

This contract solicitation, identified as N0010426QNA17, seeks the manufacture of a CABLE ASSEMBLY,SPEC in accordance with precise technical specifications derived from multiple military drawings including DWG 5893729, DWG 5894148 Rev J, and others, all under the CAGE code 53711. The requirement mandates full compliance with MIL-STD-129 for physical marking, MIL-STD-130 for item identification, and MIL-STD-973 for configuration control, with all engineering changes, waivers, and deviations requiring formal approval from the Contracting Officer. Contractors must submit two each of the 5W1, 5W2, 5W7, and 5W8 cable assemblies for qualification testing per specification 53711-5894148 Rev J before production begins. Each finished unit must be serialized with a government-assigned number obtained from NUWC Division Newport, and the entire supply chain, including subcontractors, must adhere to strict mercury-free protocols to prevent contamination of sensitive naval systems. The contract enforces a comprehensive quality management system compliant with ISO 9001 and requires production lot testing and quality conformance inspections per the referenced drawings, with all inspection records retained for four years post-delivery. Documentation such as the DD Form 1423 must accompany deliveries, and a Certificate of Compliance per DI-MISC-81356 is required prior to material shipment. The solicitation is issued under Emergency Acquisition Flexibilities and is designated as a small business set-aside with NAICS code 335311, with award based solely on the lowest aggregate price for the base quantity and the optional 365-day increase. The government has reserved the unilateral right to exercise an option for additional quantities without re-solicitation. The contract incorporates specific security protocols, requiring contractors to possess a government security clearance and authorize access to classified documents under DD Form 254. Transportation and delivery are unspecified in location but require adherence to WIDE AREA WORKFLOW payment instructions and a Stand-Alone Receiving Report certification system. All contractual documents are deemed issued upon electronic transmission. The award must be accepted bilaterally, and the resultant contract will be DO certified under the Defense Priorities and Allocations System. Additionally, the contract includes warranty provisions for one year from delivery, Buy American Act compliance, and mandatory representations

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QKH34

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

61--CABLE ASSEMBLY,SPEC

Solicitation # SPE4A626T21CW

POSTED

DEADLINE

CABLE ASSEMBLY,SPEC

Solicitation # N0010425QNF08

This contract pertains to the manufacture and delivery of a CABLE ASSEMBLY,SPEC under solicitation N0010425QNF08, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is governed by multiple military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality system compliance, with the primary design reference being drawing 5854902. The product must be manufactured without any metallic mercury or mercury contamination due to its intended use on submarines and surface ships, and any exception to this requirement necessitates prior written approval from the Procurement Contracting Officer along with detailed safety and containment protocols. The contractor is responsible for all inspection and quality assurance activities, with the government retaining the right to conduct independent inspections. All items must conform strictly to contract specifications, and deviations or engineering changes require formal approval prior to implementation. Packaging must adhere to MIL-STD-2073, and records of inspections must be maintained for four years after final delivery. Delivery is set for CLIN 0001AA with quantity of 323 units, and the contract is issued under emergency acquisition flexibilities with priority rating for national defense under the Defense Priorities and Allocations System. The contract is subject to bilateral execution, requiring the contractor’s written acceptance before becoming effective, and all contractual documents are considered issued upon electronic transmission. The solicitation is a total small business set-aside, and the contractor must provide facility details if packaging occurs off-site. Warranty coverage is one year from the date of delivery, and commercial and government document access guidelines are outlined, including procedures for obtaining restricted or classified materials. All technical inquiries and configuration changes must be submitted to the specified address in Mechanicsburg, PA, and subcontractors are bound by the same mercury-free and quality requirements. The point of contact for the solicitation is Zachary R. Morrill, with responses due by August 17, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

61--POWER SUPPLY

Solicitation # SPRMM126QGF91

This presolicitation, numbered SPRMM126QGF91, is issued by the DLA Mechanicsburg for the procurement of four power supply units under NSN 7H-6120-016912485-PP. The delivery terms are set as FOB Origin. Because the government does not own the technical data rights and has determined that reverse engineering or purchasing the data is uneconomical, the procurement is restricted by the availability of specific technical drawings and patterns. Interested parties can access standardized military and federal specifications through the DoD Single Stock Point or the ASSIST-Online portal. While the government is not currently utilizing FAR Part 12 for commercial item acquisition, vendors may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice. Responses to this requirement are due by October 19, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of The Navy → Navfac Mid-Atlantic

Same awarding agency

SJ 1781 BLOW CREEK BRIDGE REPLACEMENTNavfac Mid-Atlantic is seeking a design for the replacement of the SJ 1781 Blow Creek Bridge located at Saint Julian's Creek. The current structure is in poor condition, which negatively impacts the ability of security personnel to conduct essential daily perimeter checks. This project is categorized as a forecast and is designated as an 8(a) set-aside. The project is funded by CNIC with the design phase scheduled for fiscal year 2027 and construction planned for fiscal year 2028. It is currently listed as a pre-award action under Maximo work order GKMNZT.

Engineering Services

POSTED

about 2 months ago

DEADLINE

NSN X-132 REPAIR EXTERIOR STAIRS FOR ROOF ACCESSThis project involves the repair or replacement of the exterior maintenance stairs on the south side of building X-132, which provide the sole access point for transporting equipment and large repair items from the 5th floor to the roof. The current stairs are severely deteriorated, with extreme rust and compromised railing supports that necessitate immediate attention. Managed by Navfac Mid-Atlantic for the Department of the Navy and funded via JECC for UIC N3656A, the work requires technicians to be escorted during all repairs. Additionally, contractors must account for the presence of lead in the existing paint during the execution of the project.

Commercial and Institutional Building Construction

POSTED

about 2 months ago

DEADLINE

CI/ CRAISL-CI282 / REPIPING JP-5 LINEThis project involves the installation of a new 4 inch diameter receipt fuel line approximately 460 feet in length, extending from the CI-282 truck off load facility to the main JP-5 return line along Ocean Road. The installation will include necessary isolation valves, thermal relief valves, low point drains, and high point vents, with pipe supports consisting of guide slides mounted on concrete spread footings. All pipe installation, testing, and coating must adhere to the UFGS for above ground fuel piping. The primary objective of this construction, scheduled for FY-24, is to eliminate the risk of cross-contamination between off-specification fuel and ready-to-issue fuel at the secondary truck loading facility, CI-251. By separating the receipt line from the supply line, the project ensures that the truck loading stand remains operational and prevents delays associated with removing contaminated fuel from the system. The contract is managed by Navfac Mid-Atlantic for performance in Norfolk.

Oil and Gas Pipeline and Related Structures Construction

POSTED

about 2 months ago

DEADLINE

NNSY BLDG 171 Machine Shop repairsThe Department of the Navy, through Navfac Mid-Atlantic, is forecasting a project for the repair and electrical modernization of the B171 ship maintenance machine shop. This initiative focuses on upgrading the facility's infrastructure to ensure operational efficiency and safety within the machine shop environment. The project is designated for performance at the ML: CON22 PDC location. While specific solicitation details and set-aside designations are not yet listed, the forecast indicates a strategic effort to modernize critical ship maintenance capabilities.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

RECRUIT TRAINING BARRACKSThe Recruit Training Barracks project is a forecast opportunity issued by the Department of the Navy through Navfac Mid-Atlantic. Posted on July 2, 2026, this procurement action is intended for the development or improvement of recruit training facilities. Currently, the forecast does not specify a solicitation number, NAICS code, or set-aside designations. Further details regarding the place of performance and specific points of contact are not provided in the initial listing, and interested parties are directed to the Secretary of the Navy small business portal for additional information.

Commercial and Institutional Building Construction

POSTED

about 2 months ago

DEADLINE

(E) ASBESTOS STUDY FOR OCEANA, DAM NECK,The Department of the Navy, through Navfac Mid-Atlantic, has issued a forecast for an asbestos study to be conducted at Oceana, Dam Neck. This project is designated as an 8(a) Sole Source procurement under FAR 19.8, indicating that the contract is set aside specifically for a qualified small business under the SBA 8(a) Business Development program. The notice was posted on July 2, 2026, to signal upcoming requirements for environmental assessment and asbestos analysis at the specified location. Interested parties can find further information regarding small business opportunities through the Secretary of the Navy's small business portal.

Testing Laboratories and Services

POSTED

about 2 months ago

DEADLINE

NSN SP-237 UPDATE FIRE ALARM SYSTEMThis project involves critical safety upgrades to the fire alarm system at Building SP237 in Norfolk, managed by Navfac Mid-Atlantic. Following a failed fire drill on April 19, 2023, a fire inspector identified extreme safety deficiencies, specifically the lack of building-wide fire alarm annunciators and an insufficient number of fire alarm pull bars. The scope of work requires the installation of annunciators connected to the existing fire alarm sprinkler system and the addition of at least one more pull bar to meet safety regulations for a building of this size. The effort is funded by NAVSUP FLC Norfolk, as they hold the MUIC for the facility. This requirement is currently listed as a forecast posted on July 2, 2026, and is prioritized as an urgent necessity to rectify the safety failures identified during the inspection.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 months ago

DEADLINE

NSAM-NAVSUP WSS-B303- Remove and Enclose 2 DoorsThis forecast from Navfac Mid-Atlantic for the Department of the Navy involves the removal and enclosure of two doors. The project requires the removal of the Bay-A-28 exit door, its frame, and surrounding siding, followed by re-framing the exterior opening with 2x6 lumber and installing matching brick and metal siding panels. The interior of this opening must be insulated and covered with OSB or a similar matching material. Additionally, the contract includes work on the Armory door, which involves removing the door and frame and enclosing the opening with concrete. The new block work must be painted to match the existing structure.

Other Foundation, Structure, and Building Exterior Contractors

POSTED

about 2 months ago

DEADLINE

PORTNMC-250-Replace Middle Bay Roll Up DoorThe Department of the Navy, through Navfac Mid-Atlantic, is forecasting a project to replace the middle bay roll up door at NNSY. This requirement stems from a recent inspection that identified a broken internal barrel for which replacement parts are no longer manufactured. The proposed scope of work involves the removal and replacement of the existing unit with a non-insulated rolling steel door. The new installation will include structural guides, a torsion barrel, a hood cover, and a bottom bar safety edge for momentary close operation. Additionally, the project requires a right-hand drive commercial door operator mounted to the front of the hood, complete with a take up reel for the safety edge.

Other Foundation, Structure, and Building Exterior Contractors

POSTED

about 2 months ago

DEADLINE

NSA NH-13 Upgrades to Galley & Wardroom AreasThe Department of the Navy, through Navfac Mid-Atlantic, is forecasting upgrades to the galley and wardroom areas of NH-13 to support the hosting of Flag officers and foreign dignitaries. The project focuses on renovating the kitchen and dining spaces to improve functionality and aesthetics. Key requirements include replacing the cabinets and countertops, installing new kitchen tiling with proper angling for drainage, and replacing the wardroom carpet. Additionally, the scope of work involves painting the wardroom walls and refinishing the wooden entry doors.

Commercial and Institutional Building Construction

POSTED

about 2 months ago

DEADLINE

Water Pumping Station Instrument Renovations (SCADA)This project involves the renovation of SCADA instrumentation at three specific locations: Building 1912, the VA Water Tank, and Building 11. Managed by Navfac Mid-Atlantic for the Department of the Navy, the initiative addresses the issue of obsolete and antiquated equipment. The scope of work requires the removal and replacement of three SCADA panels along with all associated hardware and sensors to ensure operational efficiency. Funding for this project is requested for the first quarter of fiscal year 2027 through CNIC. The proposed solution suggests utilizing the current SCADA service provider to handle the execution, which includes start-up, commissioning, troubleshooting, and warranty services. Additionally, the contract requires the delivery of full project documentation and comprehensive training for UEM personnel.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 months ago

DEADLINE

(C)**CF** DN 464, PLACEMENT/INSTALLATION OF TWO ARMAGSThis forecast from the Department of the Navy, specifically Navfac Mid-Atlantic, concerns the customer-funded placement and installation of two ARMAGS under contract CNIC-1/MAXIMO-5. The project is designated as an 8(a) set-aside, restricting eligibility to certified 8(a) small businesses in accordance with FAR 19.8. The opportunity was posted on July 2, 2026, and is currently listed as a forecast. Interested parties can find further information through the Secretary of the Navy small business portal.

POSTED

about 2 months ago

DEADLINE