Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Emergency Recovery Systems (Parachute & Floats)

Active

Federal

Response Deadline10/30/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Homeland Security's Mission Support Contracting Division, involves the supply and integration of emergency descent and aquatic recovery systems for Personal Aerial Vehicle projects. The scope of work requires the delivery and installation of on-board parachute systems capable of deployment from 200 feet AGL, alongside emergency flotation devices designed to facilitate safe water landings. All deliverables must strictly adhere to established aviation safety standards for emergency recovery. The project is based in Washington, DC, and falls under NAICS code 339999. Interested parties must note the response deadline of October 30, 2026, following the posting date of October 16, 2026. The primary objective is to provide prime contractors with reliable low-altitude deployment parachutes and aquatic float capacity to ensure vehicle and passenger safety during emergency scenarios.

General Info

Agency

Department Of Homeland Security → Mission Support Contracting Division

NAICS

339999 - All Other Miscellaneous Manufacturing

Place of Performance

Washington, DC, 20229, USA

Set-Aside

NONE

Documents

This scope was carved out of CBP-INVNT-PAV-RFI.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CBP INVNT Personal Aerial Vehicle (PAV) Request for Information (RFI)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 07:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Mission Support Contracting Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Mission Support Contracting Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and integrates emergency descent and aquatic recovery systems for prime contractors on CBP Personal Aerial Vehicle projects. Provides on-board parachute systems for deployment from 200ft AGL and aquatic float capacity for emergency water landings. Utilizes low-altitude deployment parachutes and emergency flotation devices. Adheres to aviation safety standards for emergency recovery. Delivers installed parachute and floatation systems.

Similar Contracts

Same NAICS industry code

Targetry and Consumable SuppliesThis subcontract opportunity with the Department of the California Highway Patrol involves the provision of targetry and consumable supplies for prime contractors. The scope of work includes the supply of paper and steel targets, as well as general range consumables. The selected provider will be responsible for delivering law enforcement silhouettes and maintaining targetry hardware through the use of specialized printing and manufacturing equipment. All physical targets and consumables must be delivered directly to the range facility. This procurement falls under NAICS code 339999, with a response deadline set for October 30, 2026.

Department of the California Highway Patrol

POSTED

about 14 hours ago

DEADLINE

Promotional Items SupplierThis subcontract agreement establishes a partnership for the sourcing and delivery of branded promotional merchandise to support prime contractors working on District of Columbia Health Benefit Exchange Authority projects. The supplier is responsible for providing promotional items specifically designed for use during critical outreach phases, including Open Enrollment Periods, Special Enrollment Periods, and various summer activation events. The selected provider must ensure all deliverables meet government outreach quality standards and adhere to the HBX Standard Contract Provisions for insurance. Operating under NAICS code 339999, the supplier will play a key role in supporting the agency's public engagement efforts through the consistent delivery of high-quality branded materials.

Health Benefit Exchange Authority (DCHBX)

POSTED

about 16 hours ago

DEADLINE

Supply of Plain Seal (NSN 5330-01-632-2341)This subcontract involves the manufacture or procurement of plain seals under NSN 5330-01-632-2341 for prime contractors supporting DLA Weapons Support Land Supplier Operations. The Department of Defense requires that all supplied seals be entirely free of asbestos and mercury. Each unit must be delivered as a single packaged seal, utilizing waterproof, greaseproof, and opaque bags that adhere to MIL-DTL-117, Type II, Class C, Style 1 standards. The project mandates strict compliance with several military standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. Performance for this contract is centered in Houston, Texas, under NAICS code 339999. Interested parties must respond by October 23, 2026, to meet the requirements set forth by the DLA Weapons Support Land Supplier Opns Vehicle Spt agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

Gasket Supplier (NSN 5330-01-697-0558)This subcontract involves the supply of two commercial off-the-shelf gaskets under NSN 5330-01-697-0558 for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The supplier is responsible for manufacturing or sourcing the hardware, ensuring all components are mercury-free in accordance with NAVSEA guidelines. The contract mandates strict adherence to military standards for identification, marking, and packaging. Specifically, items must be marked per MIL-STD-130N and MIL-STD-129 and packaged in medium duty, waterproof, greaseproof, opaque bags following MIL-STD-2073-1E and RP001. The opportunity is categorized under NAICS code 339999.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

Interpretive Signage Fabrication & InstallationThis subcontract involves the fabrication and installation of six weather-resistant interpretive signs for garden projects managed by the Fulton County Purchasing Department in Georgia. The selected contractor will be responsible for producing durable, UV-resistant signage focused on native plants, pollinators, and water-wise landscaping, ensuring all materials are outdoor-grade and securely installed using metal posts. The project is categorized under NAICS code 339999 and is intended for prime contractors overseeing these educational installations. Interested parties must submit their responses by November 30, 2026, to fulfill the delivery of the six completed and installed signs.

Fulton County Purchasing Department

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Supply of Hydraulic Hose and Tube AssembliesThis subcontract focuses on the supply of specialized hydraulic hoses and water outlet tubes for prime contractors working on Southwest Ohio Regional Transit Authority transit vehicle projects. The scope of work requires the delivery of completed assemblies, specifically including FC 300 #6 Return Hose Assemblies and CPR Water Outlet Tubes, utilizing high-pressure return hoses and formed tubing. All provided parts must strictly adhere to OEM specifications or approved equivalents and match specific model and catalog numbers. The procurement is categorized under NAICS code 339999 and is managed through the Inventory agency in Ohio. Interested parties should note the tight response window, with the solicitation posted on October 16, 2026, and a response deadline of October 19, 2026.

POSTED

about 20 hours ago

DEADLINE

Sideline Tarp Fabrication and Supply

Dormitory Authority of the State of New York

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Identification Plate ManufacturingThis subcontract involves the manufacturing and delivery of custom-etched or engraved identification plates for prime contractors supporting Navsup Weapon Systems Support Mechanicsburg shipboard projects. The scope of work requires the fabrication of nameplates using Type C brass or Type H aluminum, specifically featuring CID number 887055402. All production must be carried out using precision engraving equipment and strictly adhere to MIL-DTL-15024 standards. Managed under the Department of Defense with NAICS code 339999, the opportunity was posted on October 16, 2026, with a response deadline of November 6, 2026. The primary objective is the provision of finished, military-specification identification plates that meet the rigorous technical requirements of the agency.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

STEM Instructional Kit Production and SupplyThis small business set-aside subcontract involves the production and supply of STEM instructional kits titled Bring Nuclear Fission to Light for prime contractors supporting the NAVSUP Fleet Logistics Center Norfolk. The selected provider is responsible for sourcing, assembling, and packaging 250 individual kits designed for high school classroom use, with each kit containing specific product samples and lesson plans. The contractor must maintain appropriate kitting facilities and ensure full compliance with the Buy American program. The final deliverable consists of 250 completed physical instructional kits ready for shipment, with performance taking place in Millington.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 22 hours ago

DEADLINE

MIL-STD-2073 Compliant Packaging and CratingThis subcontract involves providing specialized packaging and crating services for flight-critical manifold assemblies supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for ensuring all packaging adheres to MIL-STD-2073 standards, utilizing approved MIL-SPEC crates, moisture barriers, and cushioning to prepare assemblies for FOB Destination shipment. Key requirements include the application of valuation markings and Item Unique Identification in accordance with DFARS 252.211-7003. This effort falls under NAICS code 339999 and is managed through the Department of Defense. The response deadline for this opportunity is November 16, 2026.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Supply of Night Vision Helmet Mounts

US Embassy San Salvador

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Non-Metallic Hose Assembly (NSN 7540-01-152-8070)This subcontract involves the manufacture and supply of non-metallic hose assemblies, specifically NSN 7540-01-152-8070, for prime contractors supporting NAVSUP Weapon Systems Support projects at the Portsmouth Naval Shipyard. The contractor is required to produce assemblies according to Aeroquip drawing 678619, which includes performing non-destructive testing for weldments and hydrostatic testing of nipples up to 10,000 PSIG. Due to these technical requirements, the provider must possess high-pressure hydrostatic testing equipment and maintain compliance with DPAS DX ratings. The final deliverables consist of the completed hose assemblies accompanied by a comprehensive certification data package. This opportunity is categorized under NAICS code 339999 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Mission Support Contracting Division

Same awarding agency

Long-Term Maintenance and Service PlanThe Long-Term Maintenance and Service Plan is a subcontract issued by the Department of Homeland Security's Mission Support Contracting Division to provide ongoing annual service and maintenance for the Personal Aerial Vehicle fleet. This integrated five-year plan is designed for prime contractors on CBP projects to ensure continuous vehicle airworthiness and performance through the use of specialized diagnostic tools and replacement parts. To execute this contract, providers must employ FAA-certified maintenance technicians holding A&P licenses. The scope of work requires the delivery of certified airworthy vehicles and the submission of detailed annual maintenance reports. The performance of these services is centered in Washington, DC, under NAICS code 488190.

Other Support Activities for Air Transportation

POSTED

about 22 hours ago

DEADLINE

Avionics and Geofencing SystemsThis subcontract, managed by the Department of Homeland Security's Mission Support Contracting Division, involves the supply and integration of specialized navigation and geofencing software and hardware for Personal Aerial Vehicle projects. The scope of work focuses on delivering an integrated avionics suite that utilizes GPS/GNSS modules and nighttime aviation lighting to prevent navigational errors and support low-visibility operations. All deliverables must strictly comply with FAA avionics standards and 14 CFR Part 103. The project is based in Washington, DC, and falls under NAICS code 541512. Interested parties must respond by October 30, 2026.

Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

Cockpit Safety & Structural ReinforcementThis subcontract, titled Cockpit Safety and Structural Reinforcement, is issued by the Department of Homeland Security's Mission Support Contracting Division for Personal Aerial Vehicle projects. The selected contractor will be responsible for the design and fabrication of crew compartments and rollover protection systems for prime contractors. The primary objective is to develop reinforcement mechanisms for the cockpit area to ensure safety during rollover or inverted situations, utilizing high-strength reinforced alloys or composites for the cockpit canopy and egress door. The project requires strict adherence to established crashworthiness and rollover protection standards, culminating in the delivery of a reinforced cockpit and canopy assembly. Performance for this contract is based in Washington, DC. Interested parties must respond by October 30, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

PAV Airframe and Propulsion SystemThis subcontract, managed by the Department of Homeland Security Mission Support Contracting Division, focuses on the manufacture and integration of the primary aircraft structure and lift mechanism for Personal Aerial Vehicle projects. The scope of work includes the development of non-jet propulsion systems utilizing rotor or propeller designs, specifically employing enclosed fan blades and propeller mounting systems to enable vertical takeoff and level-attitude landing. The contractor is responsible for delivering a completed PAV airframe with an integrated propulsion system that adheres to 14 CFR Part 103 compliance and is sized for standard helicopter pads. Performance for this project is centered in Washington, with a response deadline set for October 30, 2026.

Aircraft Manufacturing

POSTED

about 22 hours ago

DEADLINE

CBP INVNT Personal Aerial Vehicle (PAV) Request for Information (RFI)

Solicitation # CBP-INVNT-PAV-RFI

U.S. Customs and Border Protection (CBP) is conducting market research through a Sources Sought notice to identify qualified vendors capable of providing a Personal Aerial Vehicle (PAV). This effort is for acquisition planning purposes under NAICS code 336411 and does not constitute a formal solicitation, invitation for bids, or request for proposals. The government is seeking information on vehicle capabilities, including 14 CFR Part 103 compliance, the ability to operate during nighttime, and compatibility with standard helicopter pads. Technical requirements emphasize safety and emergency features, specifically requiring propeller enclosures, parachutes deployable from 200 feet AGL, aquatic float capacity, reinforced cockpits for rollover protection, and geofencing capabilities. Interested respondents must submit a response not exceeding five pages by October 30, 2026, to the designated procurement points of contact. The submission should address eleven specific questions, including the vendor's business size, socioeconomic status, country of origin for components, and any existing federal contract vehicles such as GSA Schedules or NASA SEWP. While no formal pricing schedule is established, the government requests estimated commercial costs per vehicle, including a five-year integrated annual service and maintenance plan. All responses are considered the property of the federal government and will be used to determine if sufficient competition exists to move forward with a formal acquisition.

Aircraft Manufacturing

POSTED

about 22 hours ago

DEADLINE

Untrained Single-Purpose Detector Canine SupplierThis subcontract opportunity, managed by the Department of Homeland Security's Mission Support Contracting Division, seeks a supplier to provide untrained single-purpose detector canines for prime contractors supporting U.S. Customs and Border Protection procurement projects. The selected provider must be capable of sourcing detector-grade canines that meet specific suitability standards and managing the transportation of these animals to the BPK9 Academy in El Paso, Texas, and the FOK9 Academy in Front Royal, Virginia. The contract is designated as a total Small Business Set Aside under NAICS code 112910, with the primary place of performance located at Fort Bliss. Interested parties must be able to provide capability statements for law enforcement procurements and demonstrate the capacity to deliver live, untrained detector canines. The response deadline for this opportunity is October 27, 2026.

POSTED

DEADLINE

U.S. Customs and Border Protection (CBP) Request for Information (RFI) - UNTRAINED SINGLE PURPOSE DETECTION CANINES

Solicitation # 2027K9BPA

The Department of Homeland Security Customs and Border Protection (CBP) has issued a Request for Information (RFI) under solicitation number 2027K9BPA to conduct market research for a future Blanket Purchase Agreement. The objective is to identify vendors capable of providing untrained single-purpose detection canines to the Border Patrol Canine Academy (BPK9) in El Paso, Texas, and the Field Operations Canine Academy (FOK9) in Front Royal, Virginia. This RFI is for planning purposes only and does not constitute a formal request for proposals or a commitment to contract. Interested respondents must submit a concise capability statement, limited to two pages, by 12:00 pm EDT on October 27, 2026, detailing their company information, executive summary, relevant experience, and risk management practices. The anticipated requirements specify that canines must be between 10 and 36 months of age and belong to approved working breeds such as German Shepherds, Belgian Malinois, or Dutch Shepherds. Candidates must pass a rigorous three-phase evaluation consisting of pre-screening, medical evaluation, and behavioral assessment. Critical medical standards include a negative result for zoonotic diseases and heartworm, as well as normal gait and joint health. Behaviorally, canines must demonstrate high prey and retrieve drives and a stable temperament. The contractor will be responsible for all transportation costs and must adhere to a six-month warranty for pre-existing conditions or behavioral issues. Additionally, all personnel delivering canines are subject to CBP short-term vetting and must obtain an Access Memorandum prior to entry.

All Other Animal Production

POSTED

DEADLINE

Customs and Border Protection Controlled Solicitation Availability for UAS Platform Requirement

Solicitation # 70B06C26R00000185

U.S. Customs and Border Protection is issuing solicitation 70B06C26R00000185 for a controlled UAS platform requirement. This acquisition is anticipated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS 336411 and PSC 1550, with performance located in Summit Point, West Virginia. Due to the sensitive nature of the law enforcement operational information involved, the full solicitation package, Statement of Work, and technical attachments are not available publicly on SAM.gov. Eligible SDVOSB vendors must request access by contacting the Contracting Officer and providing their legal name, Unique Entity ID, CAGE code, and a brief capability statement regarding UAS platform integration, testing, training, and support. To receive the controlled documents, vendors must be active in SAM.gov and execute DHS Form 11000-6, a Non-Disclosure Agreement covering Protected Critical Infrastructure Information, Sensitive Security Information, and other Sensitive but Unclassified data. The deadline for proposal submissions is October 21, 2026, at 5 PM Eastern.

Aircraft Manufacturing

POSTED

DEADLINE

Device Logistics and Provisioning CoordinationThe contract entails the full logistical coordination for the setup, activation, configuration, and distribution of 632 devices to U.S. Customs and Border Protection personnel. This includes managing SIM card provisioning and ensuring each device is initially enrolled in a mobile device management system to enable secure and standardized operational use. The work is to be performed at a location in Washington, D.C., with a ZIP code of 20229, and is classified as a subcontract under NAICS code 541519, which covers other computer-related services. The contract was posted on July 6, 2026, and is being managed by the Mission Support Contracting Division within the Department of Homeland Security. All activities must align with federal procurement standards and support timely fielding of equipment to mission-critical personnel.

Other Computer Related Services

POSTED

DEADLINE

Priority and Preemption Network Access for First RespondersThe contract establishes wireless connectivity services with priority and preemption capabilities specifically for U.S. Customs and Border Protection law enforcement personnel, ensuring uninterrupted communication during emergencies and critical operations. The service is designed to grant immediate network access and overriding bandwidth authority over standard users, enabling uninterrupted command, control, and coordination when it matters most. This subcontract, under the NAICS code 517112, is managed by the Mission Support Contracting Division of the Department of Homeland Security and will be performed in Washington D.C. with a zip code of 20229, focusing on deploying and maintaining a resilient network infrastructure that supports mission-critical functions under high-stress conditions.

Wireless Telecommunications Carriers (except Satellite)

POSTED

DEADLINE

Mobile Device Management (MDM) Integration and SupportThe contract requires the enrollment and ongoing management of 632 CBP devices through approved Mobile Device Management platforms to ensure secure configuration, policy enforcement, and compliance. Key responsibilities include secure provisioning of devices, implementation of remote wipe capabilities in case of loss or theft, and continuous monitoring for adherence to security standards. All activities must align with federal security protocols and maintain operational readiness for law enforcement and border protection functions. The work is performed under a subcontract for the Department of Homeland Security’s Mission Support Contracting Division, with performance centered in Washington, D.C., at ZIP code 20229. The contract falls under NAICS code 541512, indicating it is for computer systems design and related services. Although no solicitation number or set-aside designation is provided, the posting date indicates the opportunity was made available in July 2026, and it is intended to support critical infrastructure by ensuring all mobile endpoints are consistently secured, compliant, and manageable across the agency’s operational environment.

Computer Systems Design Services

POSTED

DEADLINE

Wireless Device Service Provisioning (Nationwide & International)The contract provides unlimited wireless voice, data, text, and tethering services for 632 mobile devices utilized by CBP personnel throughout the United States, its territories, Canada, Mexico, and globally, ensuring continuous communication capabilities in all operational environments. Services must remain reliable and secure across international borders, supporting mission-critical functions with no limitations on usage or data volume. The contract is classified as a subcontract under NAICS code 517112, awarded by the Mission Support Contracting Division of the Department of Homeland Security, with performance centered in Washington, D.C., and a posted date of July 6, 2026. It is designed to sustain uninterrupted mobile connectivity for CBP agents across diverse geographic and operational scenarios, emphasizing scalability, global coverage, and high availability to meet the demands of federal law enforcement and border security missions.

Wireless Telecommunications Carriers (except Satellite)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS