Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Emergency Repair & On-Site Technical Support

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of 24/7 emergency repair services for X-ray systems, with a strict commitment to on-site technician arrival within four hours of a service request to ensure minimal operational downtime. This subcontract is focused on maintaining critical imaging equipment reliability and is tied to the National Institute of Standards and Technology under the Department of Commerce, with performance required in Gaithersburg, Maryland, at the zip code 20899. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, and the North American Industry Classification System code 811212 indicates the scope involves medical and dental equipment repair and maintenance services. The requirement emphasizes rapid response and technical expertise to support uninterrupted scientific and operational activities reliant on X-ray systems.

General Info

24/7 emergency X-ray repair with 4-hour on-site response in Gaithersburg, Maryland, under NIST standards.

Agency

Department Of Commerce NistView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Gaithersburg, MD, 20899, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide 24/7 emergency repair services for the X-ray system with on-site technician arrival within 4 hours to minimize downtime.

Similar Contracts

Same NAICS industry code

Fire Alarm System Repair & TroubleshootingThe contract titled Fire Alarm System Repair & Troubleshooting requires the provision of on-demand technical services to identify, diagnose, and repair malfunctioning components within fire alarm systems, including control panels, circuits, and initiating devices. Services must be delivered promptly to ensure system integrity and compliance with safety standards, with a focus on minimizing downtime and maintaining operational reliability across the Dallas Area Rapid Transit network. The work is classified as a subcontract under NAICS code 811212, and responses are due by August 4, 2026, with the opportunity posted on July 27, 2026. Performance is expected to occur within the jurisdiction of Texas, though specific geographic details are not provided. The contracting entity is Dallas Area Rapid Transit, and no set-aside provisions or point of contact information are indicated.

Dallas Area Rapid Transit

POSTED

DEADLINE

Fire Alarm System Preventive MaintenanceDallas Area Rapid Transit is seeking a subcontractor to perform scheduled preventive maintenance on fire alarm control panels to ensure continuous and reliable system operation. The scope of work includes routine cleaning, battery testing, firmware verification, and comprehensive diagnostics of fire alarm systems across all designated locations. This maintenance is critical to maintaining compliance with safety standards and preventing operational failures. The contract is open for bids with a deadline of August 4, 2026, and falls under NAICS code 811212 for commercial and industrial machinery and equipment repair and maintenance. The opportunity is posted as a subcontract with no set-aside designation and is accessible through the DART Bonfire Hub portal.

Dallas Area Rapid Transit

POSTED

DEADLINE

Vote Tabulator Maintenance & Technical SupportThe contract entails ongoing maintenance, troubleshooting, diagnostics, and repair services for Image Cast 2 Vote Tabulators to ensure they remain fully operational during election cycles. The work is focused on sustaining the reliability and functionality of these voting machines, with requirements centered on timely response, technical expertise, and adherence to election readiness timelines. Services must support consistent performance under high-stress conditions and include on-site intervention as needed to address malfunctions, software issues, or hardware failures. The contract is classified as a subcontract under NAICS code 811212, managed by the Procurement Department under the agency name PRO15 - Procurement Department of Massachusetts. Performance is required at School Street in Brockton, with a zip code of 02301. The solicitation was posted on July 27, 2026, and responses are due by August 10, 2026. There is no set-aside designation specified, and the point of contact information is not provided in the data. All activities must align with the operational demands of election periods, ensuring accurate vote tabulation and minimizing downtime during critical voting events.

PRO15 - Procurement Department

POSTED

DEADLINE

Installation and Commissioning SupportThe contract requires on-site installation, calibration, and comprehensive testing of a poultry isolator delivered to Texas A&M University, ensuring full operational readiness upon deployment. Technical training must be provided to university staff to enable proficient use, maintenance, and troubleshooting of the equipment, with all services performed at the university’s facility. The work is classified as a subcontract under NAICS code 811212 and is part of an institutional procurement effort managed by Texas A&M University. Proposals must be submitted by August 11, 2026, and the project is expected to begin immediately after award, with performance centered at the university’s location. No set-aside provisions or specific geographic restrictions beyond the place of performance are indicated.

Texas A&M University

POSTED

DEADLINE

Technical Support and Maintenance ServicesThe contract provides ongoing technical support, preventive maintenance, and repair services for a dermatologic laser system, with service level agreement-backed response times to ensure timely resolution of technical issues. Services are scoped to maintain the system’s operational integrity and performance, with specific attention to reliability and uptime critical for clinical applications. The work is governed under a subcontract arrangement and falls under NAICS code 811212, indicating it involves miscellaneous repair and maintenance services. The opportunity was posted on July 27, 2026, with a response deadline of August 11, 2026, and is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20. Performance is required to take place in White City, Oregon, with a zip code of 975032. While no point of contact is listed and set-aside details are unspecified, the contract emphasizes accountability through SLA commitments and is intended to support the consistent functionality of medical equipment vital to veteran care.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

On-Site Installation and Calibration ServicesThe contract pertains to the on-site installation, calibration, and system validation of a dermatologic treatment system at a Department of Veterans Affairs medical facility located in White City, Oregon, with a zip code of 975032. The work includes comprehensive safety checks and proper configuration of the equipment to ensure it meets regulatory and operational standards for clinical use. The service provider is expected to perform all tasks at the facility, with no remote or off-site components allowed, and must guarantee that the system is fully functional and compliant with applicable medical device requirements upon completion. This is a subcontract under the NAICS code 811212, which classifies medical and dental equipment and supplies repair and maintenance services, and was posted on July 27, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The contracting office is the 260-NETWORK Contract Office 20, which is managing the solicitation on behalf of the Department of Veterans Affairs. There is no set-aside designation specified, and no point of contact information is provided in the public data. The place of performance is fixed at the White City facility, and all work must be completed in accordance with the VA's protocols for medical equipment deployment.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

4-Year Advanced Exchange Maintenance for Vertex 25EI SystemThe contract provides for four years of ongoing maintenance and support services specifically for the Vertex 25EI system, with a focus on advanced exchange of defective units to ensure minimal downtime and continuous operational readiness. This arrangement guarantees that any malfunctioning components will be promptly replaced with fully functional units through an advanced exchange process, eliminating the need for traditional repair cycles and significantly reducing service disruption. The maintenance services are designed to sustain the system’s performance over the full contract term, covering diagnostic support, troubleshooting, and hardware replacement as necessary, all aligned with the high reliability standards required for critical applications. The contract is classified as a subcontract under NAICS code 811212, which pertains to electronic and precision equipment repair and maintenance. It is administered by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5 (36C245), and the opportunity was posted on July 27, 2026, with responses due by July 31, 2026. Although specific performance locations and point of contact details are not provided, the scope implies nationwide support capabilities to meet the needs of the agency's distributed infrastructure. The terms are structured to ensure uninterrupted system availability, emphasizing proactive service delivery and rapid component turnover.

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

On-Site Preventive and Corrective Maintenance ServicesThe contract requires on-site preventive and corrective maintenance services for the NanoZoomer S60FL Whole Slide Image Scanner located at the National Institutes of Health in Bethesda, Maryland. Services include routine calibration, diagnostic assessments, replacement of faulty or worn components, and thorough performance verification to ensure the scanner operates within specified technical standards. All work must be performed at the NIH facility, with technicians responsible for maintaining system uptime and meeting operational requirements critical to the institution’s research activities. The solicitation is classified as a subcontract under NAICS code 811212, indicating it pertains to electronic and precision equipment repair and maintenance. The opportunity was posted on July 27, 2026, with responses due by June 31, 2026, at 6:00 PM. The contract is administered by the Department of Health and Human Services through its Office of Laboratory Animal Welfare, and performance is exclusively tied to the Bethesda, Maryland location. No set-aside provisions or specific small business preferences are indicated.

National Institutes Of Health Olao

POSTED

DEADLINE

Installation and On-Site Integration ServicesThe contract outlines the on-site installation and integration of 13 medical units at the Oklahoma City VA facility, requiring wall mounting, precise sensor calibration, and seamless connectivity with existing clinic infrastructure. All work must be performed in person at the designated location with a ZIP code of 73105, ensuring full compatibility and operational readiness within the VA’s healthcare environment. The project demands technical expertise in medical equipment deployment and adherence to facility-specific protocols for patient safety and system interoperability. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, exclusively available to small businesses. The NAICS code 811212 identifies the scope as medical and diagnostic equipment repair and maintenance services. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the Department of Veterans Affairs through Network Contract Office 19. Failure to meet deadlines or technical requirements may result in disqualification, and all work must comply with VA standards and regulations.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Technical Installation and On-Site Integration ServicesThe contract calls for on-site technical services to uncrate, install, configure, and test a digital color press at the US Embassy in Kathmandu, ensuring seamless integration with existing embassy IT systems and facility infrastructure. The scope includes comprehensive user training to ensure operational proficiency and end-to-end system readiness, with all work performed in person at the embassy’s location in Kathmandu, Nepal, under a subcontract arrangement. All activities must be completed by the response deadline of August 11, 2026, and the work is classified under NAICS code 811212, indicating specialized equipment repair and maintenance services. The Department of State, through the US Embassy Kathmandu, is the contracting agency and requires full coordination with local IT and facilities teams to meet security, compliance, and operational standards. The contractor is expected to manage all logistics, personnel, and technical resources necessary to deliver a fully functional and secured digital printing system without disrupting embassy operations.

US Embassy Kathmandu

POSTED

DEADLINE

Warranty and Post-Delivery Support ServicesA one-year warranty is provided for the wirebond-pull tester covering all parts, labor, and return logistics necessary for repairs, ensuring comprehensive service support after delivery. This includes technical support and troubleshooting assistance to maintain operational integrity and minimize downtime. The contract falls under the NAICS code 811212 and is issued by the Department of Commerce with performance located in Boulder, Colorado, at the ZIP code 80305. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, and is classified as a subcontract opportunity without a specific set-aside designation. All maintenance and service obligations are to be fulfilled in alignment with the terms outlined, ensuring the equipment remains functional and supported throughout the warranty period.

Department Of Commerce

POSTED

DEADLINE

Corrective Maintenance and Emergency Repair of UPS SystemsThe contract specifies on-demand corrective maintenance, fault diagnosis, and emergency repair services for uninterruptible power supply (UPS) systems at FBI facilities, with a mandatory 24/7 response capability to ensure continuous operational readiness. All services must be performed promptly upon failure detection to prevent critical downtime in secure government environments, emphasizing rapid escalation and resolution of UPS-related emergencies. The work is scoped exclusively for on-site troubleshooting and repairs, requiring specialized technical expertise and immediate availability to support mission-critical infrastructure. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside, classified under NAICS code 811212 for electronic equipment repair and maintenance. It was posted on July 27, 2026, with a response deadline of August 28, 2026, and is managed by the FBI under the Department of Justice. The primary place of performance is in Washington, with all services delivered directly at FBI locations, requiring contractors to be equipped for secure site access and compliance with federal security protocols. No location details beyond the city are provided, and the contract supports essential continuity of operations for federal law enforcement functions.

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Commerce Nist

Same awarding agency

Optical Frequency Comb

Analytical Laboratory Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

CHIPS R&D Data Acquisition system

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Unable to decompose sub-opportunities due to system unavailabilityThe contract opportunity, titled "Unable to decompose sub-opportunities due to system unavailability," was posted on July 27, 2026, with a response deadline of August 10, 2026, at 3:00 PM. It is categorized as a subcontract opportunity under the Department of Commerce NIST, with the primary place of performance located in Gaithersburg, Maryland, zip code 20899. No solicitation number has been assigned, and the NAICS code is listed as NA, indicating incomplete or unavailable classification data. The type of set-aside and associated descriptions are not provided, and no point of contact information is available. The system currently cannot decompose subcontract or supplier opportunities due to technical limitations, restricting visibility into potential sub-tier awards. All further details are inaccessible through the standard data channels, and the only available reference is the SAM.gov workspace link for potential applicants to review directly.

POSTED

DEADLINE

Technical Documentation & Reporting ServicesThe contract titled Technical Documentation & Reporting Services requires the timely preparation and delivery of technical and compliance reports, including service completion documents, incident logs, and annual summaries, all to be submitted within five business days following the completion of associated services. These deliverables must meet specified standards for accuracy and compliance, ensuring consistent documentation across all contracted activities. The work is part of a subcontract under the Department of Commerce NIST and is to be performed in Gaithersburg, Maryland, with a zip code of 20899. The North American Industry Classification System code for this effort is 541990, indicating it falls under other professional, scientific, and technical services. The opportunity was posted on July 27, 2026, with a response deadline of August 6, 2026, at 5:00 PM Eastern Time. No specific set-aside designation is listed, and the agency point of contact information has not been provided. While details on the contracting office address and organizational type are incomplete, the place of performance is clearly defined, and bidders are expected to deliver high-quality documentation under strict timelines to support compliance and operational transparency for NIST. All submissions must align with the technical expectations and reporting protocols outlined in the agreement.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Radiation Safety Compliance & ReportingThe contract titled Radiation Safety Compliance & Reporting requires the contractor to ensure full adherence to federal and state radiation safety regulations, including the implementation of protocols to safeguard personnel and the environment. Key responsibilities include performing annual audits of radiation use and storage procedures, maintaining accurate and up-to-date operational logs, and submitting all mandatory reports to regulatory authorities within specified deadlines. The work is performed at the National Institute of Standards and Technology in Gaithersburg, Maryland, under the Department of Commerce. The subcontract is classified under NAICS code 541620, which pertains to environmental consulting services, and proposals must be submitted by August 6, 2026, at 5:00 PM. All activities must be carried out with strict attention to regulatory compliance, documentation integrity, and timely reporting to support ongoing federal safety standards.

Environmental Consulting Services

POSTED

DEADLINE

X-Ray System Preventive Maintenance & Calibration ServicesThe contract requires the performance of scheduled preventive maintenance and calibration services on the Astrophysics XIS-1080 X-ray system to ensure ongoing compliance with manufacturer specifications and to maintain radiation output within a strict tolerance of ±5%. This work is essential to uphold the system’s accuracy and safety, supporting its operation in a high-precision research environment. Maintenance activities must be conducted according to established protocols, with documentation provided to verify all procedures and calibration results meet required standards. The contract is classified as a subcontract under NAICS code 811212 and is associated with the Department of Commerce NIST, with performance taking place at the Gaithersburg location with a zip code of 20899. The solicitation was posted on July 27, 2026, with a deadline for responses set for August 6, 2026. Although no set-aside type or point of contact is specified, the requirement emphasizes technical precision and regulatory adherence, indicating that only qualified service providers with demonstrated expertise in X-ray system maintenance and calibration will be considered.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Fort Collins Road Repairs, NIST, Boulder, COThe contract is for roadway improvements, asphalt repairs, and surface treatments at the NIST Fort Collins Campus in Colorado, issued under solicitation number 1333ND26QNB190276 by the Department of Commerce, National Institute of Standards and Technology. It is a Firm-Fixed-Price contract designated as a Total Small Business Set-Aside under NAICS code 237310, with a small business size standard of $45 million in annual receipts. The contractor must provide all labor, materials, equipment, supervision, and transportation required to complete specified work including approximately 80,000 square feet of entrance road improvements with subgrade preparation and compaction, sealing of all cracks 0.25 inches or wider, major crack repair at 11 identified locations totaling about 220 linear feet, and application of slurry seal across affected areas. All work must comply with federal, state, and local regulations and adhere to industry standards and manufacturer specifications. The period of performance is 180 calendar days beginning from the Notice to Proceed, with a proposed start date of October 1, 2026, and offerors must demonstrate the ability to mobilize and commence work within 10 calendar days of notice. A site visit was held on July 15, 2026, and the proposal deadline was extended to August 4, 2026. Proposals must include a technical volume limited to 20 single-sided pages, a detailed cost breakdown for CLIN 0001 covering labor, materials, bonding, insurance, profit, and overhead, and must be submitted with the SF 1442 properly completed and signed. Evaluation is based on best value with non-price factors—Technical Approach, Schedule, and Past Performance—collectively carrying more weight than Price, and mobilization capability and proposal originality serve as pass/fail gates, with copy-paste proposals subject to rejection. The contract incorporates key FAR clauses including the Service Contract Act of 1965 and a specific U.S. Department of Labor Wage Determination, and requires compliance with terms related to termination for convenience or cause, records access for audit up to three years after final payment, inclusive pricing covering all taxes, and risk of loss remaining with the contractor until delivery. The contract requires adherence to specific security protocols, insurance coverage standards including workers’ compensation and liability provisions, potential performance and payment bonding under FAR 52.2

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Fast Digitizer SystemThe U.S. National Institute of Standards and Technology (NIST) is conducting market research with the intent to sole source a single Fast Digitizer System to Liquid Instruments US under the Revolutionary FAR Overhaul authority, following an extensive evaluation that found no other vendor capable of meeting its stringent technical requirements. The system must feature eight analog inputs and outputs, each with a minimum 2 GHz bandwidth and 5 G samples per second sampling rate, 14-bit resolution at full bandwidth, and 20-bit resolution at lower bandwidths, alongside at least 1 TB of internal storage and support for both internal and external clocking. It must include 1 GB Ethernet, WiFi, USB-C, 2 SFP ports, and 1 QSFP port for connectivity, be fully controllable via Python, and enable simultaneous operation of multiple software instrument modules such as PID controllers, lock-in amplifiers, phasemeters, and arbitrary waveform generators. The instrument must support real-time data streaming and playback at 80 Gbps, be rack-mountable, and allow for user-programmed hardware description language integration to synchronize hardware and software functionalities. NIST’s market research conducted between January and February 2026, involving vendor outreach, conference attendance, and product reviews, concluded that only Liquid Instruments US can satisfy all mandatory specifications, leading to the planned sole-source award. Respondents are invited to submit non-proprietary information by July 31, 2026, confirming their ability to meet the requirements, including company details, UEI registration, product model specifications, customization potential, manufacturing origin, small business status, warranty and delivery terms, installation and training services, and references from past customers. Responses must not exceed ten pages and must be submitted in Word, Excel, or PDF format to the designated point of contact. NIST explicitly states this notice is for market research only and does not constitute a solicitation or commitment to award a contract. The agency reserves the right to use all submitted information as deemed appropriate and will not acknowledge receipt or provide feedback to respondents. Any vendor believing a different NAICS code is more appropriate or that the requirements could be made more competitive is encouraged to provide recommendations. All submissions must include whether the equipment is U.S.-manufactured, plans for potential changes in origin, and whether the product is available via existing federal contracts. While responses are welcome, they do not constitute an offer to contract and will not be considered if a formal solicitation is later issued.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Wearable Full-Body Inertial Measurement Unit (IMU) Motion Capture SystemThe Department of Commerce’s National Institute of Standards and Technology (NIST) is soliciting proposals for a wearable full-body inertial measurement unit (IMU) motion capture system under solicitation number NB6710202602024, with a response deadline of August 7, 2026. This procurement is a Total Small Business Set-Aside under FAR 19.5, requiring all offerors to self-certify as small businesses and maintain an active Unique Entity ID in SAM.gov. The system must consist of two full-body IMU suits, each with at least 17 sensors operating at a minimum sampling rate of 60 Hz, capable of offline motion capture with a 20-meter operating range and at least three minutes of continuous recording. Performance must meet strict accuracy standards, including a joint angle root mean square error (RMSE) of no more than 5 degrees when referenced to an optical benchmark, and drift performance must be reported. The system must support export of time-series kinematic data, integration with Unity and Unreal Engine, and SMPTE timecode synchronization. Included deliverables also encompass one three-year software license and 20 sizing expansion clothing units in sizes S–XL. All items must be delivered to the place of performance in Boulder, Colorado, 80305, where government personnel will conduct inspection and acceptance within seven business days of delivery. Ownership transfers only upon formal acceptance. Contractors must comply with U.S. citizenship requirements for on-site personnel and pre-register foreign nationals at least 30 days in advance. Export control compliance is mandatory, requiring valid Export Control Classification Numbers (ECCNs) at award. The contract includes up to four option periods for calibration and maintenance services, each potentially extending six months to one year. Proposals must align with three attachments: a Request for Quote, detailed Specifications document, and Provisions and Clauses, with submissions expected electronically via the government procurement portal. Packaging, marking, and barcoding requirements are specified only minimally: each unit must bear a unique serial number and a future NIST property number, with no standards for label durability, placement, or barcoding format provided. No pricing information or estimated contract value is disclosed, and while the contracting office is in Gaithersburg, Maryland, no Point of Contact beyond the primary liaison, Lia M. Arthofer, is listed for technical or administrative coordination.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Thermally Insulating WaveguideThe Department of Commerce, National Institute of Standards and Technology, is seeking quotes for a Thermally Insulating Waveguide under solicitation number NB6720102601964, posted on July 27, 2026, with responses due by August 7, 2026. This is a combined solicitation requiring proposers to review three attachments: the Request for Quote, the Specifications document, and the Provisions and Clauses, which together define the technical requirements, contractual terms, and evaluation criteria. The work is performance-based and will be carried out in Boulder, Colorado, with a delivery location of 80305, while the contracting office is located in Gaithersburg, Maryland. There is no set-aside designation, meaning all eligible businesses may compete without restriction based on size or status. The project falls under NAICS code 334515, indicating a focus on navigational, measuring, electromedical, and control instruments manufacturing, aligning with NIST’s mission in precision instrumentation and advanced materials. Lia M Arthofer serves as the primary point of contact for questions and inquiries, reachable via email at lia.arthofer@nist.gov. Interested vendors must comply strictly with all documentation provided in the attachments and submit responses through the SAM.gov platform prior to the deadline. Failure to address the specifications or clauses may result in disqualification, and all proposals must demonstrate technical feasibility, thermal performance under specified conditions, and adherence to federal procurement standards.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

X-Ray Machine Maintenance ServicesThe National Institute of Standards and Technology (NIST) is seeking market input to determine the best acquisition strategy for maintenance and repair services on its Astrophysics Inc XIS-1080 Midsize X-Ray Inspection System, a critical device used to screen incoming mail, packages, and freight for security threats. This notice is not a solicitation but a sources sought action aimed at identifying capable vendors who can provide commercial-grade maintenance services to ensure uninterrupted operation, with the potential to transition to a competitive procurement if suitable alternatives to the current vendor, Astrophysics Inc, are found. NIST explicitly states that identifying Astrophysics Inc. does not guarantee a sole source award and remains open to competitive sourcing based on market responses. Respondents are asked to provide detailed information including company profile, SAM registration status, size certification under NAICS code 811210, and specifics about products and services that meet NIST’s minimum requirements, with emphasis on whether those offerings qualify as commercial or COTS items or services under federal acquisition regulations. Responses must include standard pricing, terms and conditions, warranty details, and an estimated price range, along with insights on regulatory compliance, such as adherence to FAR Clause 52.219-14, and eligibility under federal contract vehicles like GSA MAS. All submissions must be sent via email in specified formats by August 6, 2026, without confidential or proprietary data. NIST will use all received information to refine requirements and inform future acquisition decisions, with no obligation to contract, acknowledge receipt, or provide feedback to respondents.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

HysteresisgraphThe National Institute of Standards and Technology (NIST) is conducting market research through a sources sought notice to identify potential vendors capable of providing a hysteresisgraph system for characterizing permanent magnetic materials under high magnetic fields and elevated temperatures. This system is critical for developing and calibrating Standard Reference Materials (SRMs) used nationwide in industries such as electric motors, transformers, and advanced manufacturing. The technical requirements specify an electromagnet with pole pieces of at least 40 mm diameter and a 50 mm maximum gap, capable of generating magnetic fields up to ±3.2 T with FeCo pole pieces and ±2.4 T with heated pole pieces operating between 20°C and 200°C. The system must include a fluxmeter with ±0.5% accuracy, measure hysteresis loops in two or four quadrants, and accurately determine key magnetic properties such as remanence, coercivity, and maximum energy product with specified tolerances. Software must support variable measurement times under 30 seconds and comply with ASTM A977, while the hardware must accommodate cylindrical, parallelogram, and ring-shaped samples. Safety measures including Faraday shielding and electrical insulation are required, along with two manuals and operation under standard ambient conditions, with vendors required to specify acceptable environmental limits. Responses are voluntary and will not result in any obligation or payment from the government, nor do they constitute a solicitation or promise to award a contract. Companies are asked to submit detailed information on their products, including specifications, origin of manufacture, pricing, commercial terms, warranty details, and whether their offerings qualify as commercial or COTS items under federal acquisition guidelines. Respondents must also indicate their small business status under the NAICS code 334516 with a 1,000-employee size standard, confirm SAM.gov registration, assess compliance with subcontracting limitations, and disclose any existing federal contract vehicles. All submissions must be emailed to Sadaf.Afkhami@nist.gov by August 10, 2026, in Word or PDF format, limited to 12 pages with specified formatting requirements. NIST will use the feedback to determine its acquisition strategy and may issue a formal solicitation in the future, but responses to this notice will not satisfy any future solicitation requirements. The government reserves the right to use all submitted information without restriction, unless clearly marked as proprietary, and provides no guarantee of acknowledgment, feedback, or further engagement.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE