Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Emergency Repair Services for Critical Electrical Systems

Active

Federal

Response Deadline08/11/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires 24/7 emergency response services for critical electrical system failures at VA medical facilities, specifically targeting automatic transfer switches and isolation power panels. Contractors must be prepared to deliver immediate diagnostics, on-site repairs, replacement of faulty components, and full system restoration to ensure uninterrupted operation of life-safety and mission-critical electrical infrastructure. Response times are expected to be rapid and round-the-clock, reflecting the essential nature of these systems in maintaining hospital functionality and patient care. This subcontract falls under NAICS code 238210 for electrical contractors and is managed by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15. The place of performance is designated as Leavenworth, Kansas, with a zip code of 66048, though services may extend to other VA facilities as needed. The solicitation was posted on August 4, 2026, and responses must be submitted by 6:00 PM Eastern time on August 11, 2026. The work demands technical expertise in industrial electrical systems, availability of certified personnel, and proven capability to respond to urgent failures without delay.

General Info

24/7 emergency electrical response for VA medical facilities in Leavenworth, Kansas, focusing on critical power systems.

Agency

Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)View Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Leavenworth, KS, 66048

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 06:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide 24/7 emergency response for failures in ATS and isolation power panels, including diagnostics, repairs, parts replacement, and system restoration at VA medical facilities.

Similar Contracts

Same NAICS industry code

Electrical Installation and Wiring Services

ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 5 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and including conduit trenching and boring between three buildings. The work falls under NAICS codes 238210, 237130, and 237990, with a projected construction value between one and five million dollars. The solicitation is open to small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, as part of an SBA set-aside. The solicitation number is RFO-AWP-0772-00, posted on August 5, 2026, with responses due by August 15, 2026. All inquiries and submissions must be directed to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or by phone at 360-204-4418. The place of performance is exclusively in Hawaii, and the contracting organization is PTSI Managed Services, Inc.

PTSI Managed Services, Inc.

POSTED

about 5 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract involves the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and including conduit trenching and boring between three airport buildings. The work falls under NAICS codes 238210, 237130, and 237990, with a construction magnitude estimated between $1 million and $5 million. The solicitation is open to small business entities, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, as it is set aside under SBA guidelines. Interested parties must respond by the deadline of August 15, 2026, with all inquiries directed to Anna Ma, Parsons Subcontract Administrator, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418. The project is managed by PTSI Managed Services, Inc., and performance will take place entirely within the state of Hawaii.

PTSI Managed Services, Inc.

POSTED

about 5 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract involves the replacement of existing multi-mode fiber optic cabling with 12-strand single-mode fiber optic cabling to establish network connectivity between Building 2436 and Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope requires full furnishing of labor, equipment, and tools to remove retired multi-mode aerial fiber lines and splice boxes from utility poles and building infrastructure, and to install new 12-strand OS2 OSP fiber using center-owned utility poles between the network closet in Building 2436 and the Maintenance office in Building 2443. Required materials include specific Belden fiber products or approved equivalents, such as the FS3L0024NS fiber, ECX-01U rack enclosure, FFSX12LD adapter panel, and FTSLC900FS01 LC connectors, while SFPs are to be provided by Job Corps. The work must be performed in compliance with applicable federal regulations, including Service Contract Labor Standards (SCA) under Wage Determination 2015-4687 (Rev 31), Contract Work Hours and Safety Standards Act for overtime, and the Construction Wage Rate Requirements. Contractors must provide a lump sum fee bid using the specified Fee-For-Service format and demonstrate compliance with procurement requirements tied to the NAICS Code 238210. The contract is structured as a subcontracting opportunity administered by Management & Training Corporation (MTC), the operator of the Job Corps Center, under a Small Business set-aside that includes eligibility for Small Disadvantaged, Women-Owned, Veteran-Owned, HUBZone, and Service-Disabled Veteran-Owned Small Businesses. Bids must be submitted via email to Miranda Wolfe by 3:00 PM CST on August 10, 2026, and must include the completed bid sheet, supplier packet documents (W-9, self-certification, acceptance of terms), and proof of insurance meeting specified limits: $1 million per occurrence and $3 million aggregate for general liability, $1 million for commercial auto, and $500,000 for workers’ compensation, with MTC listed as the certificate holder and additional insured. Invoicing is required weekly or bi-weekly with detailed breakdowns of services, dates, unit pricing, extended amounts, invoice numbers, and purchase order numbers. Contractors must comply with drug-free workplace and anti-kickback provisions

Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current installation. The new Doppler VORTAC will include an on-site constructed 37’x37’ steel building equipped with a 60-foot diameter counterpoise integrated into the roof, along with associated foundations, site preparation, and utility connections. Accompanying the main structure is an offset TACAN component featuring a 16’x16’x20’H walk-up steel tower, also requiring dedicated foundations, site work, and utility infrastructure. This project represents a critical infrastructure modernization to enhance navigation accuracy and reliability for aviation users in the region. The solicitation is open exclusively to small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, under NAICS code 238210. The contract is managed by PTSI Managed Services, Inc. (Parsons) on behalf of the FAA, with proposals due by August 28, 2026, and primary point of contact for inquiries is Angela Stydinger.

PTSI Managed Services, Inc (Parsons)

POSTED

about 5 hours ago

DEADLINE

URI Carothers Library Critical Power Upgrade

Solicitation # RFQ27006893

The University of Rhode Island is soliciting bids to upgrade critical power infrastructure at the Carothers Library on its Kingston Campus, focusing on the replacement of main transformers, switchgear, and emergency standby power systems to ensure resilient and continuous electrical service. The project also requires the installation of a temporary transformer to maintain operations during construction, the construction of a robust screen wall surrounding the existing equipment yard for safety and visual screening, and comprehensive civil and site work to facilitate underground conduit routing beneath the loading dock drive and into the interior electrical room. All work must be performed with minimal disruption to library operations and in compliance with institutional and state safety standards. The solicitation, identified as RFQ27006893, was posted on August 5, 2026, with a response deadline of September 4, 2026, at 5:00 PM. A mandatory prebid meeting is scheduled for August 12, 2026, at 10:00 AM at the Carothers Library located at 15 Lippitt Road, Kingston, Rhode Island. The contract is being procured by the State of Rhode Island through its procurement office, with Katherine Missell listed as the primary point of contact for inquiries. Bidders must be qualified to handle complex electrical and civil infrastructure projects within an active academic environment and demonstrate experience with mission-critical power systems in institutional settings.

State of Rhode Island

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Same awarding agency

Installation and Integration Services

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Supply of Universal Headrest

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Bariatric Bench Accessory

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Compact Wheelchair Recliner

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Small Business Prime or Subcontractor ParticipationSmall businesses including SDVOSB, WOSB, and HUBZone concerns are invited to participate as prime contractors or subcontractors in supporting the XciteV2 system, with opportunities to engage across procurement and supply chain functions. The solicitation is open for responses until August 21, 2026, and is classified as a subcontract opportunity under NAICS code 423450, which pertains to wholesale trade of electronic parts and equipment. Performance of work is required to be conducted at a location in St. Louis, Missouri, with a specific ZIP code designation. This opportunity is managed by the Department of Veterans Affairs through its 255-NETWORK Contract Office 15 (36C255), and while no formal set-aside designation is specified, the structure is intentionally designed to maximize participation from qualified small businesses under various socioeconomic categories. Interested parties must submit responses through the designated SAM.gov portal prior to the deadline.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Domestic Medical Equipment Distributor (Non-Manufacturer)The contract authorizes the reseller to distribute the XciteV2 medical system under a federal subcontract, with explicit manufacturer authorization required for compliance. It is classified under NAICS code 423450 for Medical and Dental Equipment and Supplies Merchant Wholesalers, indicating the scope is limited to distribution rather than manufacturing. The opportunity is posted by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15, with performance required at the St. Louis location, zip code 63125-4199. All activities must conform to federal procurement standards and the specific responsibilities of a non-manufacturer distributor. The solicitation was posted on August 4, 2026, and responses are due by August 21, 2026, at 1:00 PM Eastern Time. There is no set-aside designation, meaning the contract is open to all eligible resellers regardless of business size or status. The contract does not include a designated point of contact, and potential bidders must rely on the official SAM.gov workspace link for additional details and submission instructions. Participation requires proven capability to support federal medical equipment distribution, adherence to manufacturer terms, and compliance with all applicable federal regulations governing medical device distribution.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Warranty and Technical Support ServicesThe contract provides a 36-month manufacturer warranty for the XciteV2 system, encompassing coverage for parts, labor, and technical support throughout the entire term. This warranty ensures that any defects or failures in the system are addressed with timely repairs or replacements without additional cost to the end user, and includes ongoing technical assistance to maintain operational effectiveness. The scope of support is comprehensive, designed to minimize downtime and maximize system reliability over the warranty period. The contract was posted on August 4, 2026, with a response deadline of August 21, 2026, and is classified as a subcontract under NAICS code 811211, which pertains to electronic and other repair and maintenance services. It is administered by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15 (36C255), with performance required at a location in St. Louis, Missouri, zip code 63125-4199. The contract does not specify a set-aside type or point of contact, and details are accessible via the provided SAM.gov link.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

On-Site Clinical Training ServicesThe contract is for the delivery of on-site clinical training services to Department of Veterans Affairs staff, specifically focused on the operation and therapeutic use of the XciteV2 system. Training will be performed at the designated location in St. Louis, Missouri, with a zip code of 63125-4199, ensuring that VA personnel receive hands-on instruction to effectively integrate the technology into clinical practice. This subcontract falls under NAICS code 611512, indicating it is categorized under other schools and instruction, and is managed by the 255-NETWORK Contract Office 15. All proposals must be submitted by the deadline of August 21, 2026, at 1:00 PM, with the solicitation posted on August 4, 2026. The contract does not specify a set-aside type, and there is no designated point of contact listed publicly.

Flight Training

POSTED

DEADLINE

Medical Device Supply – Restorative Therapies XciteV2 Clinical StationThe contract entails the supply of the complete XciteV2 Clinical Station, including the cart, stimulation cable, initial electrodes, and a 10.5-inch touchscreen tablet, intended for use in restorative therapies. This is a subcontract under the Department of Veterans Affairs, specifically managed by the 255-NETWORK Contract Office 15, with performance required at a location in St. Louis, Missouri, with a zip code of 63125-4199. The equipment is classified under NAICS code 339112, indicating it pertains to medical equipment and supplies manufacturing. The solicitation was posted on August 4, 2026, and responses are due by August 21, 2026, at 1:00 PM Eastern Time. No set-aside provisions or specific organizational type restrictions are identified, and there is no designated point of contact listed for inquiries. The procurement is part of a broader effort to equip clinical environments with advanced therapeutic technology, and full compliance with the specified equipment configuration is mandatory.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Technical Reporting & Documentation ServicesThe contract requires the provision of detailed technical reporting and documentation services with strict turnaround times: routine work must be documented and submitted within 48 hours, while emergency situations demand completion and delivery within 24 hours. Deliverables must include comprehensive test data, photographic evidence, thermal imaging results, and formal verification of regulatory compliance to ensure full transparency and accountability. All reporting must be accurate, timely, and formatted to meet technical standards expected by the Department of Veterans Affairs through its 255-NETWORK Contract Office 15. The work is to be performed at a designated location in Leavenworth, Kansas, with a zip code of 66048, and the NAICS code 541330 confirms the scope falls under engineering services. The solicitation was posted on August 4, 2026, and responses are due by 6:00 PM ET on August 11, 2026, with the contract structured as a subcontract under federal procurement guidelines.

Engineering Services

POSTED

DEADLINE

Preventive Maintenance & Testing of Isolation Power Panels (Healthcare Facilities)The contract requires the inspection, testing, and preventive maintenance of four isolation power panels located in a medical facility within the Department of Veterans Affairs system, with strict adherence to NFPA 99 standards and VA-specific requirements for critical healthcare power systems. The work must ensure uninterrupted, safe, and code-compliant operation of these panels, which are vital for protecting patients and equipment in sensitive clinical environments. All activities must be performed in accordance with established healthcare electrical safety protocols, including documentation of test results, identification of deviations, and implementation of corrective actions as needed. Performance is to take place at the facility in Leavenworth, Kansas, with a ZIP code of 66048, and the contractor is expected to submit responses by the deadline of August 11, 2026. This is a subcontract under NAICS code 238210, indicating electrical contracting services, and is managed by the 255-NETWORK Contract Office 15. While no set-aside provisions are specified, vendors must demonstrate technical expertise in healthcare electrical systems and the ability to comply with federal medical facility requirements, including precise recordkeeping and scheduling to avoid disruption to patient care operations.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Preventive Maintenance & Testing of Automatic Transfer Switches (ATS)The contract requires comprehensive preventive maintenance and testing of 16 Automatic Transfer Switches (ATS) to ensure reliable operation and compliance with NFPA 70B and Veterans Affairs standards. Services include visual inspections, infrared thermal scans, torque verification, battery testing, and operational validation to confirm proper functionality under both normal and emergency conditions. All work must adhere to industry best practices and regulatory requirements to maintain system integrity and readiness for critical power transitions. The work is to be performed at a facility in Leavenworth, Kansas, with a zip code of 66048, under a subcontract arrangement linked to the Department of Veterans Affairs through the 255-NETWORK Contract Office 15. The solicitation was posted on August 4, 2026, with responses due by August 11, 2026, at 6:00 PM. The North American Industry Classification System code is 238210, indicating the work relates to electrical contracting services. The contract does not specify a set-aside designation and does not list a point of contact, but performance must be completed in full accordance with the technical and regulatory expectations outlined for the VA and NFPA 70B.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE