Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Emergency Response & On-Call Spill Mitigation Services

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a vendor to provide 24/7 emergency response services specifically for fuel leaks, overfills, and system failures occurring at OmniTrans facilities. The scope includes immediate spill containment, isolation of affected fuel systems, and urgent repairs to restore operational integrity. Response teams must be equipped and ready to act at any time, ensuring environmental safety and compliance with regulatory standards during all phases of incident management. Services are expected to be delivered across all OmniTrans operational locations without delay, with an emphasis on rapid mitigation and minimal disruption to transit services. The contract is classified as a subcontract under NAICS code 562910, indicating it falls within the environmental remediation services category. It was posted on August 3, 2026, with a mandatory response deadline of September 3, 2026, at 10:00 PM. The Procurement Department of OmniTrans, based in California, is the issuing entity, and all work must be performed at OmniTrans facilities, though specific locations are not detailed. The vendor will be responsible for meeting all technical, safety, and timing requirements outlined in the solicitation, and no set-aside provisions are listed, making the opportunity open to all qualified subcontractors.

General Info

24/7 emergency fuel leak and system failure response at OmniTrans facilities with immediate containment and repair.

Agency

California → Procurement Department of OmniTransView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → Procurement Department of OmniTrans
ContactsNo contacts available
OfficeN/A
Organization / Agency
California → Procurement Department of OmniTrans
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide 24/7 emergency response for fuel leaks, overfills, or system failures, including spill containment, system isolation, and urgent repairs at Omnitrans facilities.

Similar Contracts

Same NAICS industry code

NAICS: 562910
New
902/903 Dorm Mold Remediation & Removal
Solicitation # 902/903 Dorm Mold Remediation and Removal
This contract is for mold remediation and removal services at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, targeting life safety and environmental deficiencies in two dormitory buildings—0902 and 0903—where visible mold growth and moisture intrusion have been identified. The scope includes full remediation of approximately 1,760 square feet per building, involving containment with negative air pressure and physical barriers, removal and disposal of contaminated drywall, insulation, ceiling materials, and finishes, thorough cleaning and sanitization using approved antimicrobial agents, dehumidification, HEPA vacuuming, and restoration with new materials matching existing conditions. Work must comply with EPA guidelines and IICRC S520 standards, and post-remediation verification including air quality testing is required. All contaminated materials and hazardous chemicals must be handled, stored, and disposed of per federal, state, and local regulations, with Safety Data Sheets submitted for all chemicals used. The contractor must manage debris daily, remove it off-site, and secure hazardous materials at the close of each workday. The contract is a fixed-price, single lump sum award with an estimated value between $25,000 and $100,000, issued under NAICS code 562910 for remediation services, with a full set of bonding, insurance, and compliance requirements. A bid bond of 20% of the bid amount is required if the bid meets or exceeds $25,000, and performance and payment bonds at 100% of the contract value are mandatory for bids of $25,000 or more, to be issued by A-rated sureties on approved forms. The contractor must maintain worker’s compensation, general liability, auto liability, and professional liability insurance with specified minimum limits. Labor must adhere to the Construction Wage Rate Requirements and Executive Order 13658, with weekly certified payroll submissions using AIA G702 and G703 forms. Retainage of 10% is held until substantial completion and acceptance, and liquidated damages of $100 per calendar day apply for delays. The work must be completed within 60 business days after Notice to Proceed, with a mandatory site visit and signature required prior to bid submission. Offers must be submitted by August 10, 2026 at 3:00 PM CST to Miranda Wolfe at Wolfe.miranda@job
Earle C. Clements Job Corps Center

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 562910
New
Mold Remediation
Solicitation # mold-remediation
The contract solicits a licensed mold remediation contractor to perform comprehensive mold removal and remediation services at the Solo Parent Dormitory within the Flint Hills Job Corps Center in Manhattan, Kansas, specifically targeting rooms 208, 209, 210, 302, 310, and the 300 hallway linen closet. Work must be completed within 10 business days and must adhere strictly to the IICRC S520 Mold Remediation Standard, EPA guidelines, OSHA regulations, and Job Corps safety and facility standards. The scope includes mold assessment, containment using critical barriers and HEPA-filtered negative air machines, removal and disposal of contaminated porous materials like drywall, insulation, and carpeting, followed by thorough cleaning, sanitization, and application of EPA-registered antimicrobial treatments. A post-remediation verification process is mandatory, requiring visual inspections, air and/or surface sampling, and a written report with lab results and photographs to confirm successful remediation. The contractor must also submit an initial assessment report, daily work logs, and provide a minimum one-year warranty on all remediation work. The solicitation is designated as a small business set-aside, open to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. Proposals must include a detailed pricing schedule with labor hours, material costs, and other expenses, along with a W-9 form and DUNS number. Contractors must provide proof of applicable licensing, a Certificate of Liability Insurance naming the Job Corps Center as both certificate holder and additional insured, and must comply with Davis-Bacon wage requirements. Materials and waste must be properly bagged, sealed, and disposed of in accordance with all regulatory standards. Award will be made to the proposal deemed most advantageous based solely on price and price-related factors, contingent upon full material compliance with all solicitation requirements. Proposals are due by 4:00 PM CST on August 13, 2026, and if the contract exceeds $30,000, the contractor must submit Serrato Form 542 and SF-1413 upon award.
Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 8 hours ago

DEADLINE

in 9 days
View Details
NAICS: 562910
New
SLED
Asbestos Abatement and Hazardous Material RemediationThe contract pertains to the inspection, notification, and removal of asbestos-containing building materials in school facilities under the requirements of AHERA regulations, ensuring the safety of students, staff, and the public. The work involves identifying and documenting ACBM, notifying relevant parties as mandated, and executing the proper abatement procedures in compliance with federal and state environmental health standards. Performance is limited to school sites managed by Humble ISD in Texas, with all activities required to meet rigorous regulatory protocols for handling, containing, and disposing of hazardous materials. Subcontractors bidding on this opportunity must be qualified to perform asbestos abatement services with certified personnel, proper licensing, and documented experience in educational facility remediation. The bid response deadline is October 5, 2026, and the solicitation is classified as a subcontract under NAICS code 562910, which covers remediation services for hazardous waste. All work must adhere strictly to timelines, safety procedures, and reporting requirements to ensure full regulatory compliance, with no deviations permitted without prior authorization. The location of performance is restricted to school properties within the Humble ISD district, and contractors are expected to coordinate operations to minimize disruption to school activities.
Humble ISD

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 562910
New
DIBBS
Hazardous Materials Notification and HandlingThe contract titled Hazardous Materials Notification and Handling requires the successful offeror to provide comprehensive services related to the identification, notification, handling, labeling, and documentation of hazardous and radioactive materials in strict compliance with all applicable regulatory standards and contractual obligations. This includes ensuring accurate Safety Data Sheet (SDS) preparation and maintenance, proper labeling of containers and shipments, and timely notifications regarding the presence and movement of regulated substances throughout the supply chain. The work is to be performed at the specified location in Pascagoula, Mississippi, with all activities subject to federal oversight and adherence to environmental, safety, and transportation regulations. This subcontract, issued under NAICS code 562910 by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, is open for response until August 11, 2026, with the solicitation posted on August 3, 2026. The performance location is clearly defined as Pascagoula with a ZIP code of 39568-0149, and while no specific set-aside designation is provided, bidders must meet all technical, regulatory, and administrative demands associated with hazardous material management. Full compliance with documentation protocols and operational safety procedures is mandatory, and failure to meet these requirements may result in non-performance or termination. Offerors are directed to the DIBBS platform for full solicitation details and submission instructions.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from California → Procurement Department of OmniTrans

Same awarding agency

NAICS: 339999
New
SLED
Specialty Tools and Application EquipmentThe Contract for Specialty Tools and Application Equipment seeks suppliers to provide a range of paint application tools essential for automotive refinishing operations, including mixing cups, funnels, spray gun cleaners, and dispensing equipment. These items are critical for ensuring precision, efficiency, and cleanliness in paint application processes within automotive repair and restoration environments. The procurement is classified under NAICS code 339999, indicating it involves other miscellaneous manufacturing, and is structured as a subcontract, meaning the winning vendor will supply goods to a prime contractor or intermediary rather than directly to the agency. The solicitation was posted on August 3, 2026, with a response deadline of August 28, 2026, at 10:00 PM Pacific Time. The contracting entity is the Procurement Department of OmniTrans, operating under the California state agency framework, and the place of performance is unspecified but likely tied to operational facilities within the state. There is no set-aside designation, meaning all qualified vendors may compete regardless of business size or ownership status. All interested parties must submit proposals through the online portal linked in the contract details, and technical specifications for the required tools are expected to be outlined in the full solicitation documentation available on the provided platform.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 325199
New
SLED
Cleaning and Surface Preparation ChemicalsThe contract titled Cleaning and Surface Preparation Chemicals is a subcontract issued by the Procurement Department of OmniTrans in California, seeking suppliers to provide degreasers, surface cleaners, and decontamination agents essential for pre-paint surface preparation and repair workflows. These chemicals must meet specific performance and safety standards to ensure effective cleaning and surface readiness prior to painting in industrial or fleet maintenance environments. The solicitation was posted on August 3, 2026, with a firm deadline for responses on August 28, 2026, at 10:00 PM Pacific Time, requiring interested vendors to submit proposals within this window to be considered. The NAICS code 325199 indicates the category pertains to other chemical product and preparation manufacturing, suggesting the supplied products must be formulated and packaged to commercial and industrial specifications. Performance of the contracted work is expected to occur within California, with no additional location details specified. There is no set-aside designation indicated, meaning any qualified supplier may bid without eligibility restrictions based on business size or ownership type. All communications and submissions must be made through the provided vendor portal link, and no point of contact information is listed in the public posting.
All Other Basic Organic Chemical Manufacturing

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 325520
New
SLED
Adhesives, Fillers, and Body Repair CompoundsThe contract encompasses the supply of automotive body fillers, adhesives, sealants, and bonding compounds essential for collision repair and panel bonding operations within the transportation maintenance sector. These materials are critical for restoring vehicle structural integrity and finish quality, requiring formulations that meet industry standards for durability, cure time, and compatibility with automotive substrates. The procurement is structured as a subcontract under NAICS code 325520, which classifies it within the paint and coating manufacturing industry, indicating a focus on specialized chemical products tailored for high-performance automotive applications. The solicitation was posted on August 3, 2026, with a response deadline of August 28, 2026, at 10:00 PM Pacific Time. The contracting agency is the Procurement Department of OmniTrans, operating under the state of California, though specific location details such as city, zip, or performance address are not provided. The absence of a set-aside designation suggests this opportunity is open to all qualified vendors without restriction based on business size or ownership type. Interested parties must submit proposals through the designated vendor portal linked in the posting, ensuring compliance with technical specifications and delivery requirements for consistent supply to repair facilities across the agency’s network.
Adhesive Manufacturing

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 541380
New
SLED
Storage Tank Testing and Repairs
Solicitation # RFQ-MNT27-07
The contract for Storage Tank Testing and Repairs under solicitation RFQ-MNT27-07 issued by OmniTrans in California requires the contractor to perform annual monitor certifications, California Air Resources Board (CARB)-mandated Vapor Recovery Testing, and SB 989 Secondary Containment Testing across all designated facility locations. All work must strictly comply with current regulations from the Certified Unified Program Agency (CUPA), South Coast Air Quality Management District (SCAQMD), State Water Resources Control Board (SWRCB), and other applicable local, state, and federal agencies. The contractor is responsible for coordinating testing activities with these regulatory bodies and ensuring all test results are properly submitted. Pricing must be submitted online via the provided Cost File and must include all direct and indirect costs such as labor, materials, equipment, and supplies. The contract has a base period of three years with two optional one-year extension periods, with pricing for option years locked in at the time of initial bid and subject to unilateral exercise by OmniTrans with at least 30 days' written notice. The place of performance is tied to OmniTrans’ operational sites, including East Valley, West Valley, and I Street Divisions, with inspection occurring on-site and final administrative acceptance handled at their headquarters in San Bernardino. The award will follow a Lowest Price Technically Acceptable (LPTA) basis, prioritizing responsive and responsible bidders with the lowest cost who meet minimum technical and compliance standards including valid CSLB and ICC certifications, required insurance with A.M. Best A:VIII or higher ratings, and full adherence to 49 CFR Part 26 DBE requirements flow-downed to subcontractors. The contractor must maintain compliance with strict security protocols including visible identification badges, prohibition of unauthorized photography, and reporting of security incidents or malfunctions, and must also comply with confidentiality, indemnity, and public records obligations. All reports, technical data, and documentation generated under this contract become the property of OmniTrans. Invoices must be submitted monthly by the 15th in duplicate via hard copy or electronic means to the designated accounts payable office, and must include contract number, invoice number, delivery description, date, and quantity. Key personnel cannot be reassigned without prior written approval, and OmniTrans reserves the right to remove any individual deemed unsuitable. No contract value is specified due to incomplete pricing submissions in the Cost File, but the agreement is structured as a possible five-year, multi-year, option-based contract with no stated ceiling. All submissions must be
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 30 days
View Details