Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Enamel Supply and Delivery for Naval Vessels

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of 19 units of military-grade enamel designated by NSN 8010013446690 to the USS WASP LHD 1 at FPO AE 09514, ensuring the material meets stringent defense specifications. The procurement is governed by DPAS prioritization requirements, guaranteeing expedited handling and fulfillment in alignment with national defense needs. Logistics are structured under FOB Destination terms, meaning the supplier assumes full responsibility for transportation, risk, and delivery to the designated naval vessel, with all shipping activities requiring full traceability to maintain accountability and compliance throughout the supply chain. The work falls under NAICS code 325510, classifying it within the paint and coating manufacturing sector, and is administered by the Defense Logistics Agency on behalf of the Department of Defense under a subcontract arrangement.

General Info

Supply of 19 military-grade enamel units to USS WASP under DPAS priority, FOB Destination, DLA administration.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

325510 - Paint and Coating Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES-26-F-61RL.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ENAMEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 19 units of military-grade enamel (NSN 8010013446690) to USS WASP LHD 1 at FPO AE 09514. Includes compliance with DPAS, FOB Destination logistics, and traceable shipping.

Similar Contracts

Same NAICS industry code

Solicitation # N0010426QYACK

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Traffic Paint and Pavement Marking in 275 Gal. Totes

Solicitation # INF-2026-0427

The City of Houston is soliciting bids for black and yellow traffic paint and pavement marking delivered in 275 gallon totes under solicitation number INF-2026-0427. The contract will be awarded to a responsive and responsible bidder based on the overall low net bid meeting specifications, though the City reserves the right to award by individual item, a combination of items, or the overall best bid. Bidders must provide exact compliance with published specifications; those proposing equivalent products must include the manufacturer's name, product name, product number, and descriptive literature. Samples may be requested by the City without charge. Deliveries are to be made FOB destination as specified on individual purchase orders, with bidders required to state the proposed delivery timeline in calendar days. Payment is due thirty days after invoice approval or acceptance of goods. Bidders must hold their pricing for at least 90 days and certify compliance with various Texas Government Code requirements, including anti-boycott provisions regarding Israel, energy companies, and firearm entities. Preference may be given to designated City Businesses or Local Businesses under the Hire Houston First Program. All bids must be submitted via the City's electronic bidding system by October 12, 2026.

City of Houston

POSTED

about 17 hours ago

DEADLINE

Polyurethane Coating Kit SupplierThis subcontract involves the supply of polyurethane coating kits for prime contractors working on Defense Logistics Agency Troop Support projects. The supplier is required to provide NSN 8010-01-701-9298, which must be formulated according to MIL-DTL-64159C standards. The scope of work includes the delivery of one kit with a minimum shelf life of 12 months and a corresponding Safety Data Sheet to Fort Buchanan, Puerto Rico. Strict adherence to military standards is required for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129, including the application of Special Marking Code 32. Additionally, the supplier must manage the shipping of hazardous materials in compliance with IP025 and 29 C.F.R. 1910.1200 regulations. This opportunity falls under NAICS code 325510 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Supplier of Specialized Coating Compound (NSN 8010-01-720-1012)This subcontract involves the supply of 10 gallons of specialized coating compound, identified by NSN 8010-01-720-1012, to support Defense Logistics Agency supply contracts for the USS BOXER LHD 4. The material must be Type I, compliant with technical standard TT-P-28J, and possess a minimum shelf life of 24 months. All deliverables must adhere to strict packaging standards MIL-STD-2073-1E and MIL-STD-129, while maintaining full HAZMAT compliance according to 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. The agreement mandates strict adherence to the Buy American Act and the Berry Amendment. Performance will take place at FPO 96661 under NAICS code 325510. Interested parties must respond by October 13, 2026, to meet the requirements set forth by the Department of Defense.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

COATING COMPOUND, NO

Solicitation # SPE8ES-27-T-0061

Solicitation SPE8ES-27-T-0061 is a fixed-price contract issued by the Defense Logistics Agency Troop Support for the procurement of 10 gallons of coating compound (NSN 8010-01-720-1012). The supplies are to be delivered FOB Destination to the USS BOXER LHD 4 with a required delivery date of June 23, 2025, and a delivery window of 20 days after order. The item is classified as a Type I material with a non-extendable shelf life of 24 months and must comply with specific technical standards, including TT-P-28J and MIL-STD-129R. Due to the hazardous nature of the coating compound, the contractor must adhere to strict safety and packaging regulations. This includes submitting Safety Data Sheets and Hazardous Communication Standard labels for approval prior to award in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials shipping under IP025. Additionally, the contract mandates compliance with the Buy American Act and the Berry Amendment, requires electronic invoicing via Wide Area Workflow, and incorporates standard FAR and DFARS clauses regarding cybersecurity, trafficking in persons, and the prohibition of hexavalent chromium.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0064

Solicitation SPE8ES-27-T-0064 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for four quarts of polyurethane coating, identified by NSN 8010016506559. The material must adhere to specification PRF-85285F(1) Revision F and is subject to Qualified Products List requirements, meaning the manufacturer must be QPL approved at the time of award. The item is classified as a Type 2 item with an extendable shelf life of 12 months. Delivery is required within five days after receipt of order to a destination in Martinsburg, West Virginia, with inspection and acceptance occurring at the destination. The contractor must comply with rigorous packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Because the coating is a hazardous material, the contractor must follow the Hazard Communication Standard for labeling and comply with IP025 for shipping. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0015

Solicitation SPE8ES-27-T-0015 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of six kits of blue polyurethane coating, NSN 8010-01-397-3973. The required material is a high-solids formulation for aircraft application with a maximum VOC of 420 grams per liter, conforming to FED-STD-595 color number 35044 and MIL-PRF-85285F. This is a Qualified Products List item, requiring the manufacturer to be QPL approved at the time of award. Each kit must produce 1.89 liters and consists of parts A and B, with a specified shelf life of 12 months. Delivery is required by January 27, 2027, with a need ship date of December 14, 2026, shipped FOB Destination to DLA Distribution San Joaquin in Tracy, California. Strict packaging and marking standards apply, including compliance with MIL-STD-129 for labeling with lot or batch numbers and specific kit assembly options using D3 or E6 boxes. Because the coating is classified as hazardous material, suppliers must provide Safety Data Sheets and labels consistent with OSHA Hazard Communication Standards and 29 C.F.R. 1910.1200. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, safeguarding covered defense information, and the use of the Wide Area Workflow system for electronic invoicing and payment.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

EPOXY COATING KIT

Solicitation # SPE8ES-27-T-0060

Solicitation SPE8ES-27-T-0060 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one Epoxy Coating Kit (NSN 8010-01-302-3609). The required product is a gray, three-coat system conforming to MIL-DTL-24441, Formula 157, with a maximum VOC of 340 g/L. Each kit must consist of Parts A and B to produce 37.9 liters (10 gallons), delivered in two 5-gallon open-head, re-sealable pails. The item is classified as a Type II shelf-life item with a 24-month duration, and the contractor must ensure that at least 85 percent of this shelf life remains upon receipt by the government. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels consistent with 29 CFR 1910.1200. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific requirements for lot or batch number identification. Delivery is set for destination in Jefferson City, Missouri, with a required delivery date of October 1, 2026, and a delivery window of 20 days after order. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with CMMC Level 2 self-assessment and Buy American Act regulations. Inspection and acceptance will occur at the destination per FAR 52.246-1.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

COATING COMPOUND, REFLE

Solicitation # SPE8ES-27-T-0067

Solicitation SPE8ES-27-T-0067, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of 4 quarts of reflective coating compound, identified by NSN 8010016592206 and part number 1440ALERTQT from Hentzen Coatings Inc. The contract specifies a delivery timeline of 20 days after order, with a required delivery date of October 9, 2026. Delivery is FOB Destination to the USS Makin Island LHD 8 via the fastest traceable means, explicitly prohibiting the use of parcel post. The item is classified as a Type I product with a non-extendable shelf life of 12 months. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the material is hazardous, compliance with IP025 and the Hazard Communication Standard 29 CFR 1910.1200 is required, and a Material Safety Data Sheet must be submitted. Quality assurance will be managed through destination inspection and acceptance, with sampling conducted per MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the safeguarding of covered defense information.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

POLYURETHANE COATIN

Solicitation # SPE8ES-27-T-0058

Solicitation SPE8ES-27-T-0058 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one kit of polyurethane coating, identified by NSN 8010-01-701-9298. The requirement specifies a non-extendable shelf life of 12 months and mandates compliance with MIL-DTL-64159C. Delivery is required within five days after order to a destination in Fort Buchanan, Puerto Rico, with FOB Destination terms. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Special Marking Code 32 for shelf-life identification. Because the material is hazardous, the supplier must comply with IP025 for shipping and submit Safety Data Sheets and Hazardous Communication Standard labels for approval prior to award in accordance with 29 C.F.R. 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system. Additional regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS 252.204-7012 for safeguarding covered defense information. The government will not evaluate offers utilizing additive manufacturing. A price evaluation preference is available for SBA-certified HUBZone Small Business Concerns.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

COATING, CHEMICAL

Solicitation # SPE4A5-27-T-0145

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

PAINT, HEAT RESISTING

Solicitation # SPE8ES-27-T-0012

Solicitation SPE8ES-27-T-0012 is a request for quotations issued by the Defense Logistics Agency for the procurement of seven kits of heat resisting paint, identified by NSN 8010-01-357-4155. The contract requires delivery to the DDSP New Cumberland Facility within 43 days after order, with FOB and inspection/acceptance points set at the destination. The items are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Due to the hazardous nature of the material, the contractor must strictly adhere to the Hazard Communication Standard 29 CFR 1910.1200, which includes submitting Safety Data Sheets and HCS labels for approval prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for friction closure cans and hazardous material shipping regulations. The procurement is subject to the Buy American Act and Balance of Payments Program for quotes above the micro-purchase threshold, and all invoicing must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Aerospace Part (NSN 7690-01-730-8970)This subcontract involves the supply of one unit of a specialized aerospace component, identified by NSN 7690-01-730-8970, to support prime contractors delivering Defense Logistics Agency supply contracts to Tinker AFB. The required hardware must be either part number OX43903-13 from Oxley Inc or S842-349902-13 from Boeing. The provider must ensure strict adherence to military standards, specifically MIL-STD-129 for shelf life marking and MIL-STD-2073-1E and RP001 for packaging. Additionally, the contract mandates full compliance with Buy American regulations and the proper safeguarding of covered defense information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Valve Tailpiece (NSN 4820-01-422-7182) SupplyThis subcontract involves the procurement of one Valve Tailpiece, identified by NSN 4820-01-422-7182, to support prime contractors delivering Defense Logistics Agency supply contracts for the USS Theodore Roosevelt CVN 71. The selected provider is responsible for manufacturing or sourcing the component in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The agreement requires the contractor to maintain cybersecurity compliance per NIST SP 800-171. Delivery of the single packaged and marked unit is required FOB Destination to FPO 96632. This opportunity is categorized under NAICS code 332911 and is managed through the Defense Logistics Agency under the Department of Defense.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Flow Control Valves (NSN 4820016972094)This subcontract involves the manufacture or procurement of 2,000 flow control valves for prime contractors supporting the USNS Miguel Keith under Defense Logistics Agency supply contracts. The valves must strictly adhere to NSN 4820016972094 and Carrier Corp part number 17-40002-01, with delivery terms set as FOB Origin and performance located in San Diego. The contractor is required to comply with the DLA Master List of Technical and Quality Requirements and MIL-STD-129 packaging standards. Additionally, the agreement mandates strict adherence to the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards to ensure regulatory and national security compliance.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-DTL-24441 Epoxy Coating Kit SupplierThis subcontract involves the supply of gray, three-coat epoxy coating kits to prime contractors supporting Defense Logistics Agency Troop Support contracts. The supplier is responsible for manufacturing or sourcing coatings that strictly adhere to MIL-DTL-24441 Formula 157 and FED-STD-595 Color 26622, ensuring that VOC levels do not exceed 340 g/L. All products must be packaged in 5-gallon open-head re-sealable pails in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The contract requires full compliance with the Buy American Act and the provision of Safety Data Sheets as per 29 CFR 1910.1200. Final delivery of the completed kits is to be made to Jefferson City, Missouri. This opportunity falls under NAICS code 325611 and is managed under the Department of Defense.

Soap and Other Detergent Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supplier of Eaton Elbow Tube to HoseThis subcontract involves the procurement and delivery of one authentic Eaton brand Elbow Tube to Hose, part number 8846-12D, for the Defense Logistics Agency. The supplier is responsible for providing a genuine component that meets the specific National Stock Number 4730-LN-003-5656 and adheres to strict MIL-STD-129 marking and ASTM D3951 packaging standards. The contract requires full compliance with the Buy American Act and the DLA Master List of Technical and Quality Requirements. The item must be delivered FOB Destination to the Fleet Readiness Center East located in Cherry Point. Interested parties must respond by October 15, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

HAZMAT Cold-Chain Freight TransportThis subcontract for the Defense Logistics Agency involves the cold-chain freight transport of temperature-sensitive hazardous materials. The contractor is responsible for hauling 15 kits of sealing compounds using refrigerated vehicles to ensure temperatures remain below 80 degrees Fahrenheit. Deliveries must be executed within a five-day window to Moody Air Force Base in Georgia and Langley Air Force Base in Virginia using traceable shipping methods. To qualify for this operation, the provider must maintain DOT Hazardous Materials Certification and ensure full compliance with OSHA Hazard Communication standards. The project falls under NAICS code 484220 and requires strict adherence to safety and temperature protocols to maintain the integrity of the hazardous materials during transit.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Supplier of Black Sealing Compound (NSN 8030-01-511-1245)This subcontract involves the supply of black sealing compound, part number PR-2201 B1 (NSN 8030-01-511-1245), to prime contractors supporting the Defense Logistics Agency. The agreement requires the delivery of 15 kits to Moody Air Force Base and Langley Air Force Base. To ensure product integrity, the supplier must guarantee a minimum shelf life of six months and maintain storage and transit temperatures below 80 degrees Fahrenheit. The supplier is required to adhere to strict regulatory and packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for shipments. Additionally, the contractor must maintain full compliance with Federal Standard No. 313-E and OSHA Hazard Communication Standards. This procurement falls under NAICS code 423460 and is managed through the Department of Defense.

Ophthalmic Goods Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Manufacturer of Aviation-Grade Blackout CurtainsThis subcontract involves the manufacture and supply of aviation-grade blackout curtains for prime contractors working on Defense Logistics Agency Troop Support aviation projects. The contractor is responsible for fabricating four finished curtains according to Boeing part number 35-20559-6 and NSN 7230-00-020-6515, utilizing light-blocking fabrics and industrial textile sewing equipment. All deliverables must include corresponding Safety Data Sheets. Strict adherence to the Berry Amendment and the Buy American Act is required for this contract. Additionally, all products must be packaged in accordance with ASTM D3951, MIL-STD-129, and DLA RP001 standards. The place of performance for this effort is located in Goldsboro, North Carolina.

All Other Miscellaneous Textile Product Mills

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Freight DeliveryThis subcontract for MIL-SPEC Packaging and Freight Delivery supports prime contractors on Defense Logistics Agency Troop Support projects. The scope of work involves specialized military packaging and palletization adhering to ASTM D3951 and RP001 standards, with shipment marking conducted according to MIL-STD-129. The contractor is responsible for the hauling and final delivery of accepted materials to military consignees located in Greensboro and McLeansville, North Carolina. This requirement falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Storage Cabinet Supplier (NSN 7125-01-627-0290)This subcontract involves the supply of storage cabinets for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing one storage cabinet that strictly adheres to NSN 7125-01-627-0290 and the DLA Master List of Technical and Quality Requirements RA001. Additionally, the provider must ensure full supply chain traceability documentation is submitted in accordance with Section C requirements. The opportunity is categorized under NAICS code 493190 and is managed by the Department of Defense. Interested parties must respond by October 14, 2026, to meet the procurement timeline established by the agency.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS