Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

END CAP, AIRCRAFT POD

Active
SPE4A7-27-T-1138Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A7-27-T-1138 is a total small business set-aside for the procurement of one aircraft pod end cap, identified by NSN 1680-01-684-7954. The requirement is managed by the DLA Weapons Support ASC Supplier Oper A&E and AF Div, with a need ship date of October 2, 2027, and an original required delivery date of October 31, 2027. Delivery is FOB Origin, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and technical compliance, including adherence to ISO 9001:2015 standards and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Key requirements include FAA airworthiness approval, supply chain traceability documentation, and specific FAA bare item marking. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Administrative processing, including invoicing and receiving reports, must be conducted through the Wide Area WorkFlow system. The procurement incorporates various FAR and DFARS clauses covering cybersecurity, domestic sourcing via the Buy American Act and Berry Amendment, and safeguarding of covered defense information.

General Info

Small business set-aside contract for one aircraft pod end cap by October 2027.

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

1

RFQ SPE4A7-27-T-1138

PDF, High priority: read this first18 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA

Full Description

Show more
END CAP,AIRCRAFT POD
END CAP, AIRCRAFT PO
REFER TO PROC NOTE L32 FOR HIGHER LEVEL QUALITY REQUIREMENTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ046: FAA Bare Item Marking Requirements RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
Refer to Proc Note L32 for higher level quality requirements” to the POT
SPE4A7-27-T-1138
SECTION B
in lieu of any higher-level quality STO
CRITICAL APPLICATION ITEM
Chelton, Inc. DBA Cobham Antenna 63563 P/N 780-A0633 CHELTON AVIONICS, INC 1WZE2 P/N 780A0633 COBHAM SATCOM R3323 P/N 780A0633
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018662877 0001 EA 1.000
NSN/MATERIAL:1680016847954
DELIVERY (IN DAYS):0345
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE4A7-27-T-1138
SECTION B
PR: 7018662877 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/02/2027 Original Required Delivery Date:10/31/2027
SPE4A7-27-T-1138 NSN/Part Number: 1680-01-684-7954 Quantity: 1 EA Purchase Request: 7018662877QTY: 1 Delivery: 345 days ADO

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 327215
New
DIBBS
MIRROR ASSEMBLY
Solicitation # SPE4A7-27-R-X066
Solicitation SPE4A7-27-R-X066 is a total small business set-aside for the procurement of Mirror Assemblies (NSN 5820-01-221-4083) for the Defense Logistics Agency. The requirement specifies a quantity of 8,000 units, though pricing is based on an estimated annual quantity of 8 units, with a guaranteed minimum order of 4 and a maximum of 8. The government requires delivery to various CONUS stock locations within 75 days after receipt of order. Award will be based on best value, with a comparative assessment of price, quoted delivery, and past performance, the latter of which is weighted most heavily via SPRS assessments and historical quality and delivery compliance. The contract mandates strict adherence to technical and quality requirements, including DLA master lists and specific standards such as MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance are conducted at the origin, with sampling methods following MIL-STD-1916 or ASQ H1331. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic content, and the prohibition of mercury in packaging.
Glass Product Manufacturing Made of Purchased Glass

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-27-R-X068
Solicitation SPE4A7-27-R-X068 is an Indefinite Delivery Purchase Order issued by the DLA Weapons Support ASC for the procurement of 124,000 sleeve spacers, identified by NSN 5365-01-034-2519. The contract is not a small business set-aside and is intended to span five base years or until an aggregate total of 350,000 dollars is reached. Pricing should be based on an estimated annual quantity of 125 units, with minimum delivery orders of 75 and maximums of 201. Delivery is required within 200 days after receipt of order to various CONUS stock locations, with inspection and acceptance occurring at the destination. The award will be based on best value, with a significant emphasis on past performance, specifically SPRS assessments and historical quality and delivery compliance. Technical requirements are governed by the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Due to the presence of controlled unclassified information, contractors must obtain CMMC Level 2 certification and upload it to the SPRS by November 10, 2026. Additionally, the item is subject to ITAR or EAR export controls, requiring approved JCP certification and specific DLA training for access to technical data. Invoicing and payment must be processed through the Wide Area WorkFlow system.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS