This Solicitation opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

END CAP, VISCOMETER,

Closed

SPE2DH-26-T-5196Federal

Submission Closed07/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

Federal

MVG Software to integrate existing Test and Measurement

Solicitation # N00173-27-Q-1301423348

The Naval Research Laboratory intends to award a sole source purchase order to MVG, Inc. of Marietta, Georgia, for the procurement of MVG Software to integrate existing Test and Measurement systems. Specifically, the requirement is for one CATR RCS Evaluation under part number P-42913. This action is being conducted under Simplified Acquisition Procedures for purchases not exceeding $250,000, utilizing NAICS code 334515 and Product Service Code 6625. This notice is not a solicitation or a request for proposals, as the agency has determined that MVG, Inc. is the only responsible source capable of satisfying the requirements. Interested parties may submit evidence that competition would be advantageous to the government by the response deadline of November 4, 2026. All correspondence regarding this intent, identified by notice number N00173-27-Q-1301423348, should be directed to the primary point of contact, James Chappell.

Naval Research Laboratory

POSTED

DEADLINE

AN/ALQ-131(V) Electronic Countermeasures (ECM) Pod Test Lab Equipment

Solicitation # FA852327QB002

Solicitation FA8523-27-Q-B002 is a combined synopsis and request for quotation for the procurement of high-precision RF and microwave testing equipment to support the Electronic Combat International Security Assistance Program Office at Robins Air Force Base. The requirement consists of one Spanawave 8003 Microwave Scalar Network Analyzer and three Spanawave 80303A Standard Power Sensors. This is a sole-source procurement intended for award to Liberty Test Equipment, Inc., as a Firm-Fixed-Price commercial purchase order. The acquisition is conducted under simplified commercial procedures and is rated for national defense use under DPAS rating DO-A7. The award will be based on technical acceptability, fairness of price, and contractor responsibility. To be considered technically acceptable, the offeror must provide factory-new equipment and written verification of their status as an OEM-authorized commercial distributor capable of providing genuine factory calibration and warranty support. Delivery is required within eight weeks after receipt of order, with terms specified as FOB Destination. The contractor must comply with Item Unique Identification and MIL-STD-129 marking standards. Quotations are due by November 4, 2026, at 5:00 PM EST and must be submitted electronically to the designated contracting points of contact.

FA8523 Afmc/aflcmc Esyc

POSTED

DEADLINE

WPP PSCC test equipment (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of WPP PSCC test equipment associated with the Columbia-Pacific Northwest region. This requirement is categorized under NAICS code 334515, which pertains to the manufacturing of instrument and control panels. The procurement process is managed by Kelli Jasperson, who serves as both the primary point of contact and the Small Business Specialist. While specific performance locations and set-aside details are not currently listed, the forecast is intended to provide advance notice of the agency's intent to acquire specialized testing equipment for its regional operations.

Bureau of Reclamation

POSTED

DEADLINE

WPP Bushing Monitors for Transformers (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of WPP Bushing Monitors for Transformers within the Columbia-Pacific Northwest region. This requirement is categorized under NAICS code 334515, focusing on the acquisition of specialized monitoring equipment to ensure the operational integrity of transformer bushings. The procurement process is managed by Kelli Jasperson, who serves as both the primary point of contact and the Small Business Specialist for this action. While specific solicitation numbers and set-aside details are not yet available, the forecast indicates a planned posting date in late October 2026.

Bureau of Reclamation

POSTED

DEADLINE

Breaker Test Equipment Sets (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of Breaker Test Equipment Sets for the Columbia-Pacific Northwest region. This requirement is categorized under NAICS code 334515, which pertains to the manufacturing of instrument panels. The procurement process is managed by Kelli Jasperson, who serves as both the primary point of contact and the Small Business Specialist. While specific solicitation details and set-aside designations are not yet listed, the forecast was posted on October 30, 2026.

Bureau of Reclamation

POSTED

DEADLINE

Purchase of two (2) Millimetre-Wave Frequency Extender Modules for a Vector Network Analyzers (VNAs) from 110 GHz to 170 GHz

Solicitation # 26-58131

The National Research Council Canada, specifically the Herzberg Astronomy and Astrophysics (HAA) laboratory, is soliciting the purchase of two millimetre-wave frequency extender modules to expand the measurement capabilities of its existing Vector Network Analyzers (VNAs) from 116 GHz to a range of 110 GHz to 170 GHz. These modules must be fully compatible with either the Keysight PNA N5227B or the Rohde & Schwarz ZNA67 and are required to support two-port S-parameter measurements. Technical specifications mandate a guaranteed minimum dynamic range of 110 dB and a typical dynamic range of at least 120 dB over 80 percent of the operating frequency range using a 10 Hz IF bandwidth. The contract will be awarded to the compliant offer with the lowest evaluated price. Deliverables must be shipped DAP to Victoria, British Columbia, by January 8, 2027, and the contract period extends from the award date to one year following acceptance. The procurement process requires separate technical and financial submissions by November 25, 2026, with strict adherence to electronic submission guidelines. Additionally, the contractor must comply with green procurement policies, utilizing reusable or recyclable packaging, and adhere to Canadian federal regulations regarding the Immigration and Refugee Protection Act.

National Research Council of Canada

POSTED

DEADLINE

Keithley 2110-120 Mulitmeters

Solicitation # W8703-270127/A

The Department of National Defence is seeking bids for solicitation W8703-270127/A for the supply and delivery of 110 Keithley Benchtop Multimeters, part number 2110-120 or an equivalent model. All goods must be delivered no later than February 28, 2027, with the place of performance located in Halifax, Canada. This opportunity is restricted to pre-qualified suppliers who currently hold a Supply Arrangement in series E60HN-16ELEC with Public Services and Procurement Canada. The solicitation was posted on October 30, 2026, and the deadline for responses is November 16, 2026. The procurement is subject to various trade agreements, including the CFTA and several other international free trade agreements.

Department of National Defence

POSTED

DEADLINE

ETS-Lindgren EMSENSE 40 Electric Field Probe System

Solicitation # W8703-270128/A

The Department of National Defence is seeking bids under solicitation W8703-270128/A for the supply and delivery of ETS-Lindgren EMSENSE 40 Electric Field Probe System components. The required items include two EMSENSE 40 Probes, two Laser Power Cards, and two Fiber Cables, or their equivalents. All goods must be delivered no later than February 28, 2027, with the place of performance located in Gatineau, Canada. This opportunity is restricted to pre-qualified suppliers who currently hold a Supply Arrangement in series E60HN-16ELEC with Public Services and Procurement Canada. The notice was posted on October 30, 2026, and the deadline for responses is November 17, 2026. This procurement is governed by the Canadian Free Trade Agreement.

Department of National Defence

POSTED

DEADLINE

Supply of Unmounted Magnetic Compasses (NSN 6605-00-553-8795)This subcontract involves the procurement and delivery of 1,914 unmounted magnetic compasses for prime contractors supporting DLA supply contracts. The hardware must strictly adhere to NSN 6605-00-553-8795 specifications and be delivered to New Cumberland. The contract is managed under the Department of Defense for the DLA Weapons Support Nuclear Reactor Program. The supplier is required to provide Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313. Additionally, the provider must ensure full compliance with the Berry Amendment and the Buy American Act. The solicitation is categorized under NAICS code 334515.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0335

Solicitation SPE2DH-27-T-0335, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of bromine colorimeters under NSN 6630-01-690-5334. The requirement consists of two line items, each for a quantity of one unit, with a delivery timeframe of 20 days after receipt of order. Delivery is set as FOB Destination, with the consignee located at the USS Rafael Peralta DDG 115 in FPO AP 96694-1500. Inspection and acceptance will also occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies commercial packaging in sealed unit containers per MIL-STD-2073-1E and RP001. Marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and prohibiting certain telecommunications equipment. Quotes must be submitted through the DIBBS portal.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-007C

This procurement, issued by the DLA Land and Maritime Maritime Supply Chain, is for the supply of three electrical power calibrators under NSN 6625-01-381-1352. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery timeframe of 148 days after order and a required delivery date of October 3, 2026. Shipping is established as FOB Origin, and inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List via RA001, and specific restrictions prohibit the intentional addition of mercury or mercury-containing compounds unless functionally required. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Additionally, the contract mandates adherence to NIST SP 800-171 and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cybersecurity reporting.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0860

Solicitation SPE7M0-27-T-0860 is issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of two current sensors, identified as critical application items under NSN 6625015749838. Approved part numbers include 6443292-01M1 from AMZ Alabama Inc. and BAE Systems Tactical Vehicle Systems LP, as well as ASM000560C from Control Solutions LLC. The requirement is not a small business set-aside and falls under NAICS code 334515. Delivery is required within five days after receipt of order, with an original required delivery date of November 3, 2026. The items are to be delivered FOB Origin to the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must comply with RP001, and hazardous materials must be handled according to IP025 and 29 CFR 1910.1200. Inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of certain telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The item specified is an end cap for a viscometer, identified by NSN 6630-01-498-9902, with a quantity of one unit, intended for use at the Oil Test Centre under Version F specifications. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is subject to DLA packaging standards, requiring commercial packaging that ensures protection from damage during transit, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated delivery point. All units must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must be properly labeled accordingly. Bidders must clearly state the source and part number being supplied, and the end cap is classified as covered defense information. The solicitation, issued under SPE2DH-26-T-5196, was posted on July 14, 2026, with responses due by July 21, 2026, and delivery is required within 20 days of award. The contracting agency is the Medical Supply Chain FSH under the Department of Defense, with performance address at FPO, zip 09573, and primary point of contact is Tina Vu.

General Info

One NSN 6630-01-498-9902 viscometer end cap, DLA com ply, medical marking, delivery in 20 days, Defense Department.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

UNIT 100259 BOX 1, FPO, AE, 09573, USA

Set-Aside

NONE

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 14

Solicitation

Response DeadlineJul 21

Deadline has passed

Submission Closed

07/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Office AddressUSA

Contacts

Tina Vu

contact@example.gov

+1 (555) 000-0000

Full Description

END CAP,VISCOMETER,
END CAP, VISCOMETER, OTC
(FOR OIL TEST CENTRE, VERSION F)
..
UNIT OF ISSUE EACH (EA)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-498-9902 Quantity: 1 EA Purchase Request: 7017473437QTY: 1 Delivery: 20 days ADO