Top

Energy and Utility Infrastructure Development

Active

Federal

Response Deadline08/21/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Energy → Argonne National Labor - DOE ContractorView Agency

NAICS

221122 - Electric Power DistributionView NAICS

Place of Performance

Lemont, IL, 60439, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 08:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Argonne National Labor - DOE Contractor

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Development of dedicated power substations, backup generation, and sustainable energy solutions to support multi-megawatt computing loads.

Similar Contracts

Same NAICS industry code

NAICS: 221122

New

Federal

Sole source Sacramental Peak Observatory electrical power servicesThe National Science Foundation is conducting market research to confirm whether any sources beyond Otero County Electric Cooperative, Inc. can provide uninterrupted electrical utility services to the Sacramento Peak Observatory in Sunspot, New Mexico, a federally owned research facility housing critical scientific infrastructure including the Dunn Solar Telescope. Current assessments indicate Otero Electric is the only known provider capable of supplying power through the existing transmission and distribution infrastructure serving the site, and the NSF intends to proceed with a sole-source award to them if no viable alternatives are identified. Continued electrical service is essential to sustain all site operations, including facility maintenance, communications, security, information technology, environmental controls, water and wastewater systems, and the protection of government property. Interested parties may submit a capability statement by July 30, 2026, at 12:00 PM Eastern Time, demonstrating their ability to deliver electrical services using the current infrastructure without significant cost duplication or delays. Submissions must include evidence of responsibility under FAR Part 9, technical proof of capability, past performance in remote locations, and socioeconomic status information such as 8(a), Woman-Owned Small Business, or HUBZone designation. Responses that merely request information or lack clear, unambiguous evidence of capability will not be accepted, and the government will not reimburse any costs incurred in preparing submissions. This is solely a market research notice and does not constitute a solicitation for bids or proposals; the award decision will be based on the findings from this process.

Office Of Polar Programs

POSTED

DEADLINE

Emergency Power Systems, RFPQ 0630-26-EPSThe City of Falls Church is soliciting proposals for Emergency Power Systems under RFPQ 0630-26-EPS, with the solicitation number DB-121607, posted on July 6, 2026, and a response deadline of July 28, 2026, at 4:00 PM. This procurement is categorized under NAICS code 221122, which pertains to Electric Power Generation, Transmission and Distribution, and is being conducted by a state, local, or educational government agency in Virginia. All bids must be submitted through the City's official procurement webpage, and any information on that site supersedes details provided elsewhere, including eVA. The work is to be performed in Falls Church, VA 22046, with Jim Wise serving as the point of contact for inquiries, reachable via email at jwise@fallschurchva.gov or phone at 703-248-5007. The solicitation does not specify a particular set-aside type, indicating it is open to all qualified vendors.

POSTED

DEADLINE

POWER SUPPLYThis procurement is a total small business set-aside under FAR 19.5 for uninterruptible power supplies (UPS) required by the U.S. Coast Guard Surface Forces Logistics Center, issued under solicitation number 70Z08526Q30049B00 with a response deadline of July 30, 2026. Only products manufactured by MDF Technologies are acceptable, and vendors must submit an authorized distributor letter from the OEM as a mandatory condition for responsiveness; failure to provide this documentation will result in non-responsiveness. The solicitation specifies two distinct power supply units by NSN and part number—21 units of NSN 6130-01-560-6282 (Part # UPS1-2.4K-1G-SRNDTI-JS2E) and 15 units of NSN 6130-01-684-1998 (Part # SN2000-R)—with delivery required to Baltimore, MD, under FOB Destination terms, meaning the vendor bears all risk and cost until receipt by the Government. Pricing must be inclusive of shipping with no separate line item permitted, and all quotes are evaluated for fairness and reasonableness. Technical acceptability hinges on strict compliance with brand specifications, OEM authorization, packaging and marking per MIL-STD-2073-1E and MIL-STD-129P Change 4, ESD protection guidelines where applicable, and timely delivery. Packaging requirements include wooden crates for units over 50 lbs, anti-static measures for ESD-sensitive components, and mandatory labeling with NSN, part number, purchase order, and "STORE INDOORS ONLY" warnings. All vendors must maintain an active SAM.gov registration, be free from debarment or suspension, and comply with a comprehensive set of FAR clauses including those governing ethics, whistleblower protections, prohibition of foreign surveillance equipment, Buy American requirements, labor standards, and subcontracting limitations. Offers must include completed commercial item representations via SAM.gov or in submission, and contractors must not include indemnification clauses that violate the Anti-Deficiency Act. Invoicing must be submitted through the IPP platform using the contract number, UEI, and TIN, and no barcoding is required. Evaluation will be based on technical acceptability, fair and reasonable pricing, past performance, and responsibility status, with award determined by the most advantageous offer considering both price

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

POWER MONITORING REPLACEMENTThe US Embassy in Antananarivo is seeking to replace its outdated power monitoring system, which has been nonfunctional since 2015 and no longer supports current operational needs. The project aims to install a modern, state-of-the-art system capable of delivering real-time power status tracking, comprehensive data logging, and improved system reliability to ensure uninterrupted mission-critical operations. The replacement will address critical gaps in monitoring capability and enhance the embassy’s infrastructure resilience. This procurement is being conducted under solicitation number 19MA1026Q0010, classified as a combined solicitation with no set-aside provisions, and falls under NAICS code 221122 for electrical power generation, transmission, and distribution. The opportunity was posted on July 17, 2026, with proposals due by August 21, 2026. Work will be performed at the embassy campus in Antananarivo, Madagascar, while the contracting office is based in Washington, DC, under the Department of State. Primary point of contact is Charlise Brown, with Ruth Rajaona serving as the Procurement Supervisor for additional inquiries. All submissions must be made through the SAM.gov portal.

US Embassy Antananarivo

POSTED

DEADLINE

Standby Generator and Enclosure InstallationThe contract entails the supply and installation of a standby generator housed within a protective enclosure to maintain uninterrupted power for critical systems during utility outages. The work is scoped to ensure reliable electrical backup in support of essential operations, with the generator and enclosure installed at a location in Los Angeles with a zip code of 90293. The project falls under NAICS code 221122, indicating it relates to electric power generation, transmission, and distribution services. This is classified as a subcontract and was posted on July 17, 2026, with the agency entity listed as the City of Los Angeles under the state of California. No specific set aside provisions or point of contact details are provided, and the exact location within Los Angeles is not specified beyond the zip code. The project site is clearly defined, and the work is intended to address power resilience for critical infrastructure.

POSTED

DEADLINE

Electrical Interconnection and Grid Tie-InThe contract entails the engineering, permitting, and installation of all necessary electrical infrastructure to connect a solar photovoltaic system to the utility grid, including the supply and integration of transformers and switchgear. This work is critical for ensuring reliable and compliant grid interconnection and involves full coordination with utility standards and regulatory requirements. The effort covers all phases from design and permitting through physical installation and commissioning, ensuring the system meets safety, performance, and interconnection guidelines. This subcontract, issued under NAICS code 221122 for Electric Power Generation, Transmission, and Distribution, is associated with Kern County in California and was posted on July 16, 2026. The performance location and specific site details are not specified in the data provided, but the scope implies on-site execution at a solar facility under Kern County jurisdiction. The work requires licensed engineering oversight, adherence to state and utility interconnection protocols, and timely completion to support the broader renewable energy initiative linked to the project identified through the provided web link.

POSTED

DEADLINE

FCC TERRE HAUTE CUP GENERATOR #7 REPAIRThe Federal Correctional Complex at Terre Haute, Indiana, is soliciting bids for the inspection and repair of Cup Generator #7 under solicitation number 15B41826Q00000027, exclusively for 100% small business set-aside participants as defined by NAICS code 221122 for electric power distribution, with a size standard of 1,100 employees. The contract is firm-fixed price and requires submission of a quote via the designated form, with all pricing inclusive of freight to the delivery address at 4200 Bureau Road North, Terre Haute, Indiana. The government will evaluate quotes based on best value, prioritizing quality, past performance, technical compliance, and administrative and shipping costs, with price as a significant but not sole determining factor. Only complete and fully compliant offers will be considered, and the solicitation is strictly “all or none,” meaning partial responses will be rejected. All vendors must be registered in the System for Award Management (SAM) and must complete required representations and certifications through ORCA. The work must be completed within 120 calendar days, including security clearances, material procurement, removal of old components, installation, testing, and demobilization. Quotes must include the Unique Entity ID and estimated delivery time and must be submitted electronically by the deadline of Friday, July 31, 2026, at 11:00 AM EST to rmoothery@bop.gov; mailed or late submissions will not be accepted. Payments will be processed via Electronic Funds Transfer, with Government Purchase Cards available for awards of $15,000 or less. All item descriptions and units of issue must be strictly followed without modification. The point of contact for all correspondence is Richard Moothery, and updates to the solicitation will be posted on sam.gov, which bidders are responsible for monitoring continuously.

POSTED

DEADLINE

90815R1 Scattergood GS. Units 1&2 Green Hydrogen-Ready ModernizationThe Los Angeles Department of Water and Power is soliciting bids for the 90815R1 Scattergood GS Units 1&2 Green Hydrogen-Ready Modernization project under solicitation number 230812. This opportunity, posted on July 2, 2026, requires all proposals to be submitted electronically via the Electronic Request Solicit Procure (eRSP) system; mail-in or hard copy submissions will not be accepted. The response deadline is set for September 30, 2026, at 9:00 PM Pacific Time. The project falls under NAICS code 221122 and involves modernizing existing generating units to be compatible with green hydrogen technology, aligning with future decarbonization goals. Performance of the work will occur at the Scattergood Generating Station in Los Angeles, California. All submittal requirements are detailed in the official bid documents and must be strictly followed. Technical inquiries and correspondence should be directed to Juanico, R Albert G, the designated Point of Contact, via email at ralbertg.juanico@ladwp.com. The opportunity is open to eligible entities without a specific set-aside designation and is issued under the California state and local government category.

POSTED

DEADLINE

Overhead Power Line Maintenance (70 kV & 21 kV)The contract covers routine inspection, vegetation management, hardware repair, and preventative maintenance of existing 70 kV and 21 kV overhead distribution lines located on state-owned land in California. Work includes ongoing efforts to ensure the reliability and safety of the electrical infrastructure by addressing overgrown vegetation, replacing damaged or worn components, and performing scheduled maintenance to prevent outages and system failures. The scope is limited to existing lines and does not involve new construction or upgrades. This is a subcontract under the California State Lands Commission with a NAICS code of 221122 for Electric Power Generation, Transmission, and Distribution. The solicitation was posted on July 2, 2026, and performance is expected to occur across state-owned parcels where the high-voltage distribution lines are situated. All work must comply with state regulations and land use requirements, and the contractor is responsible for coordinating activities to minimize environmental impact and maintain public safety while ensuring continuous service. No specific point of contact or physical location details are provided in the data, but further information may be available through the linked project page.

California State Lands Commission

POSTED

DEADLINE

Electronic ReclosersNewberry Utilities is seeking sealed proposals from qualified manufacturers, authorized distributors, or value-added resellers to supply Tavrida electronic reclosers or an approved equal, along with all necessary associated materials, in accordance with detailed technical specifications outlined in the solicitation. The contract requires full compliance with performance, quality, and delivery standards to ensure interoperability and reliability within the utility’s existing infrastructure. All bids must be submitted by the deadline of July 27, 2026, at 7:00 PM Eastern Time, with proposals evaluated based on technical suitability, pricing, and adherence to specifications. The solicitation is issued under number 6191-015-072726 and was posted on June 22, 2026, with no set-aside provisions in place for small businesses or other categories. The contracting entity is the City of Newberry in South Carolina, and the place of performance is limited to locations within the state. All questions or communications regarding the solicitation should be directed to Alex Dowd at adowd@cityofnewberry.com. Proposers must access the full solicitation documents through the official state procurement portal at the provided URL to ensure complete understanding of requirements and submission protocols.

POSTED

DEADLINE

Retail Electricity Supply by Installation (Per CLIN)The contract involves the supply and delivery of retail electricity to various military and federal installations, with each installation managed under individual Contract Line Item Numbers (CLINs). It encompasses not only the provision of electricity but also the scheduling and coordination necessary to ensure timely delivery. This subcontract is managed by DLA Energy under the Department of Defense and relates to NAICS code 221122, which covers electric power distribution. The solicitation was posted on June 15, 2026, with responses due by July 27, 2026. While specific locations for performance are not detailed, the contract's focus is clearly on supporting federal and military sites. The contract does not specify a set-aside category, indicating it may be open to various suppliers. This opportunity supports critical infrastructure by ensuring reliable electricity supply tailored to the needs of defense and federal operations.

POSTED

DEADLINE

Mercantile Energy Aggregation & Supply ManagementThe contract involves managing electricity supply aggregation for 300 commercial customers with a substantial combined annual energy load of 378,908 MWh. Responsibilities include procurement of electricity, designing rate structures, coordinating with suppliers, and integrating billing processes to ensure seamless delivery and accurate cost allocation. The scope is tailored to optimize energy supply management for the aggregated customer base, leveraging economies of scale and efficient supplier relations. This subcontract, titled "Mercantile Energy Aggregation & Supply Management," is issued by the City of Cincinnati, Ohio, and aligns with NAICS code 221122 related to electric power distribution. The solicitation was posted on June 12, 2026, with a response deadline set for July 24, 2026. The contract represents a strategic effort to streamline energy procurement and management for a significant commercial segment, aiming to enhance cost-effectiveness and operational efficiency.

POSTED

DEADLINE

More opportunities from Department Of Energy → Argonne National Labor - DOE Contractor

Same awarding agency

NAICS: 335931

New

Federal

High-Current Input Cable Supply (UL3530, 4AWG)The contract calls for the supply of a high-current input cable compliant with UL3530 standard and rated at 4AWG gauge, specifically designed for high-power DC applications. The cable must meet stringent electrical and safety requirements to ensure reliable performance under demanding operational conditions. The solicitation is issued as a subcontract under NAICS code 335931, indicating the focus is on other electrical equipment and component manufacturing, and is procured by Argonne National Laboratory, functioning as a Department of Energy contractor. Performance of the work is exclusively located in Lemont, Illinois, with a zip code of 60439, and delivery must be completed by the response deadline of July 24, 2026, at 10:00 PM Eastern Time. The opportunity was posted on July 22, 2026, leaving a narrow two-day window for submission, underscoring urgency in securing qualified suppliers for critical infrastructure components.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

SoftPanel Software Kit Development and SupportThe contract is for the development, delivery, and technical support of the 62000D Series SoftPanel Software Kit, designed to enable remote monitoring and control of DC power sources. This subcontract involves creating software tools that allow users to interact with DC source equipment from a distance, ensuring seamless operation, real-time data access, and system diagnostics. The work is expected to meet specific technical requirements for reliability, compatibility, and user interface functionality, with an emphasis on integration with existing laboratory and industrial systems. Performance of the contract is centered in Lemont, Illinois, with a zip code of 60439, and the award is issued under the NAICS code 511210, indicating software publishing. The solicitation was posted on July 22, 2026, and responses are due by July 24, 2026, reflecting a very tight turnaround for proposals. The contracting entity is Argonne National Laboratory as a Department of Energy contractor, indicating this effort supports federal research infrastructure. Technical support is a critical component, requiring ongoing maintenance, updates, and responsiveness to user feedback post-delivery to ensure sustained operational effectiveness.

POSTED

DEADLINE

CAN FD Interface Integration and Firmware DevelopmentThe contract requires the design and integration of a CAN FD interface and corresponding firmware tailored specifically for the 62000D-2000HL models to facilitate high-speed communication and ensure full protocol compatibility. The work involves developing embedded software and hardware interface components that enable seamless data transmission at enhanced bandwidths, supporting the advanced performance requirements of the target systems. All deliverables must meet strict technical specifications to ensure reliability, interoperability, and compliance with industry standards for automotive and industrial control networks. Performance of the contract is centered in Lemont, Illinois, with a tight turnaround window, as responses are due just two days after the posting date of July 22, 2026, and must be submitted by the deadline of July 24, 2026. The contract is classified as a subcontract under NAICS code 541512, indicating it falls under computer systems design services. The work is being procured by Argonne National Laboratory, a U.S. Department of Energy contractor, and is intended to support critical infrastructure and research systems requiring robust, real-time communication capabilities. All parties involved must adhere to the technical and scheduling requirements outlined by the agency to ensure timely and successful implementation.

Computer Systems Design Services

POSTED

DEADLINE

UL Inspection and Labeling ServicesArgonne National Laboratory, acting as a Department of Energy contractor, is seeking a third-party service provider to conduct inspection, testing, and labeling of a bidirectional DC source to verify compliance with applicable electrical safety standards under UL protocols. The work is specifically focused on ensuring the device meets rigorous safety requirements through independent validation, with the ultimate goal of obtaining official UL labeling. The solicitation was posted on July 22, 2026, and responses are due by 10:00 PM ET on July 24, 2026. This is classified as a subcontract under NAICS code 541380, which pertains to other scientific and technical consulting services. The performance location is in Lemont, Illinois, with a zip code of 60439, and there is no set-aside designation specified for small businesses or other categories. All work must be completed to satisfy UL certification criteria, and the selected vendor will be responsible for delivering documented test results and official labeling in accordance with recognized safety standards.

Testing Laboratories and Services

POSTED

DEADLINE

High-Voltage Bidirectional DC Power Supply ManufacturingThe contract calls for the manufacture and delivery of a high-voltage bidirectional DC power source rated at 2000 volts, 180 amps, and 45 kilowatts, engineered with regenerative capabilities and high efficiency for use in research applications. The system must be capable of both sourcing and sinking power with precise control, supporting advanced testing and experimentation in energy storage, grid simulation, or electric vehicle component validation. Performance requirements emphasize reliability, thermal management, and minimal energy loss during operation, ensuring suitability for sensitive laboratory environments. The contract is a subcontract under the Department of Energy, managed by Argonne National Laboratory, with a fixed delivery location in Lemont, Illinois, ZIP code 60439. It was posted on July 22, 2026, and responses are due by July 24, 2026, indicating a very short turnaround window for proposal submission. The NAICS code 335313 classifies this as an electrical equipment manufacturing procurement, targeting specialized suppliers with demonstrated expertise in high-power electronics and regenerative power systems. No set-aside provisions are specified, leaving the opportunity open to all qualified vendors regardless of business size or status.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Bi-Directional DC SourceThe contract seeks a domestic source for a high-power bidirectional DC source rated at 2000 volts, 180 amps, and 45 kilowatts, along with mandatory ancillary components including a CAN FD interface for 62000D-2000HL models, a SoftPanel software kit, a UL3530 4AWG input cable, and UL inspection and labeling services. The solicitation strictly prohibits sourcing from a list of identified vendors including OptiGrid, Keysight, Ametek, Axiom Test, Chroma Systems, Transcat, Advanced Test, B&K Precision, and Magna-Power, requiring direct procurement from original manufacturers or authorized distributors. All equipment must comply with strict counterfeit prevention standards, with immediate reporting obligations for any suspect or counterfeit items, and must adhere to the Laboratory’s site access, safety, and ethical conduct requirements. Delivery is to Argonne National Laboratory in Lemont, Illinois, with FOB Destination terms for domestic shipments and DAP under INCOTERMS 2010 for international deliveries, and inspection and acceptance occur at the delivery point. The contract mandates compliance with a broad suite of federal regulations including cybersecurity safeguards under FAR 52.204-21, data breach notification within ten business days, prohibition of Kaspersky and other flagged telecommunications equipment, and compliance with labor standards such as minimum wage and paid sick leave. Contractors must maintain an active Unique Entity Identifier in SAM, demonstrate small business subcontracting intentions if applicable, and ensure all employees adhere to the Laboratory’s Code of Business Ethics and Conduct, with non-compliant personnel subject to removal. Payment will be processed upon formal acceptance at the destination, though specific contract value and pricing details are not disclosed. All parties must affirm compliance with environmental protection, data security, and anti-fraud provisions, and failure to meet requirements may result in termination for cause or convenience.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Compliance & Regulatory Strategy (Energy Tech Focus)

Environmental Consulting Services

POSTED

DEADLINE

Mentorship & Technical Coaching

Educational Support Services

POSTED

DEADLINE

Technical Feasibility & R&D Support Services

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Market & Commercialization Strategy Advisory

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Intellectual Property (IP) Strategy & Management Consulting

Environmental Consulting Services

POSTED

DEADLINE

Workforce Development & Training Programs

Professional and Management Development Training

POSTED

2 days ago

DEADLINE

in 29 days

View Details