Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Engine Fuel Pump Parts Kit Manufacturing and Assembly

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the complete manufacturing, component sourcing, and assembly of 190 units of engine fuel pump parts kits identified by NSN 2910-00-355-7669, all in strict compliance with DLA specifications and relevant industry standards from Rolls-Royce or Federal-Mogul. All work must adhere to rigorous quality and performance requirements to ensure compatibility and reliability in military applications. The procurement is structured as a subcontract under a total small business set-aside, exclusively reserved for small businesses as defined by the SBA under FAR 19.5, and is classified under NAICS code 333618 for other engine equipment manufacturing. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where production and delivery must be executed. The opportunity was posted on August 9, 2026, with a firm response deadline of August 20, 2026, and is managed by the Fluid Handling Division of the Department of Defense.

General Info

Manufacture and deliver 190 fuel pump kits per DLA specs to New Cumberland, PA, under small business set-aside.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete manufacturing, component sourcing, and assembly of 190 units of engine fuel pump parts kits (NSN: 2910-00-355-7669) to DLA specifications, including compliance with Rolls-Royce or Federal-Mogul standards.

Similar Contracts

Same NAICS industry code

LEVER ASSEMBLY, POWE

Solicitation # SPE7L1-26-T-949D

The contract pertains to the procurement of one lever assembly, power-speed control, identified by part number 9649-44 and NSN 2990016608702, sourced from COLUMBUS JACK CORPORATION. Delivery is required within 20 days under FOB origin terms, with no tolerance for quantity variance—exactly one unit must be provided. The item is classified as a critical application item, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless approved substitutes are explicitly authorized. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, and delivered to the designated government receiving location at JB MDL, NJ. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is the individual piece (EA), consistent with DoD standards. The contract number is SPE7L1-26-T-949D, issued under NAICS code 333618 by the Department of Defense’s Land Supply Chain organization. The original required delivery date is July 23, 2026, with a response deadline for proposals set for August 21, 2026. All shipments must reference RDD 777 and include the provided freight shipping address and special identifiers. Government-specific codes designate internal tracking and distribution protocols, and all deliveries are subject to inspection and acceptance at the destination point.

LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

MANIFOLD, EXHAUST

Solicitation # SPE7L3-26-T-170S

The contract pertains to the procurement of one exhaust manifold, part number 5446708 with NSN 2815-01-530-5079, furnished by CUMMINS INC. The item must be delivered within 20 days to either the parcel post or freight address at Camp Lejeune, North Carolina, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods and materials, with no special marking required. The item must be shipped via traceable means, excluding parcel post. Strict prohibitions ban the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in batteries, lighting, instruments, sensors, weapons, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation or award date controlling performance. The contracting office is aligned with the Department of Defense under Land Supplier Opns Vehicle Spt, with Lee Miller listed as the primary point of contact. The solicitation number is SPE7L3-26-T-170S, with a response deadline of August 21, 2026, and the required delivery date set for August 11, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

MOTOR ASSEMBLY, ELEC

Solicitation # SPE7M0-26-T-036J

The contract pertains to the procurement of a single electric motor assembly with NSN 6105-01-664-7336 under solicitation SPE7M0-26-T-036J, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days after order placement, and responses must be submitted by August 21, 2026. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to any hardware or supplies furnished under this contract, with exceptions narrowly defined to include functional mercury used in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specifically authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shock-proof and equipped with a secondary containment boundary to prevent leakage, in compliance with NAVSEA 5100-003D. No data is currently available, and any alternate offeror must submit a complete data package covering both the primary and alternate parts. The place of performance is designated as Suffolk, VA, with Laurie Wassmuth as the primary point of contact for inquiries.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

PLATE, OIL COOLER, EN

Solicitation # SPE7L0-26-T-0399

The contract specifies the procurement of one unit of a plate oil cooler for engine applications, identified by NSN 2930-01-649-4979 and part number 04-21299 from CUMMINS POWER GENERATION INC. Delivery is required within five days under FOB origin terms with no variance allowed in quantity. The item must be packaged in accordance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129 with unit of issue as EA and quantity per unit pack as 1. The delivery destination is the Letterkenny Army Depot in Chambersburg, Pennsylvania, and shipment must occur via the fastest traceable means, explicitly excluding parcel post. The item is to be palletized per DLA packaging requirements and marked with the government-provided routing identifier and barcodes. Inspection and acceptance occur at the destination, and the original required delivery date is August 7, 2026. The contract is issued under solicitation SPE7L0-26-T-0399, managed by the Department of Defense’s Land Supply Chain ESOC, with contact information provided for Jeffrey Bloom. All technical and quality specifications referenced are governed by the DLA Master List in effect on the solicitation issue date.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

Solicitation # W911S226U3990

The U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum, is seeking qualified small businesses to supply an Oil Filter Crusher under a combined solicitation with the number W911S226U3990. This opportunity is exclusively reserved for small businesses under the SBA Small Business Set Aside - Total category, with the NAICS code 333618 indicating the contract falls under Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, at 3:00 PM Eastern Time. The place of performance is listed with a zip code of 76544, though no specific city or state is provided. The primary point of contact for inquiries is Rachel Rosenbaum, reachable by phone at 254-287-0304 or email at rachel.r.rosenbaum.civ@army.mil. The contract’s official details and submission portal can be accessed via the SAM.gov link associated with the opportunity.

W6QM Micc-Ft Drum

POSTED

about 7 hours ago

DEADLINE

Solicitation # FA483026Q0052

The 23d Contracting Squadron at Moody AFB, GA, is conducting market research under FAR Part 10 to identify qualified sources capable of supplying twenty Raider 65 HP Multi-Fuel Outboard Motors or their functional equivalent for use on Wing P4.7 inflatable craft in amphibious, littoral, and riverine operations. This is strictly a Sources Sought notice and not a solicitation—no contract will be awarded, and no reimbursement will be provided for response costs. The requirement is for fully submersible, 65 HP, two-stroke, inline three-cylinder engines with true multi-fuel capability, operating reliably on JP-5, JP-8, Jet-A, F-24, Diesel, and Standard Unleaded Gasoline without internal modifications. Each motor must have a post-submersion de-watering system allowing restart within five minutes, a maximum dry weight of 178 lbs, a 20-inch long shaft, and include a 6-gallon tactical fuel bladder, submersion/de-watering tool kit, and operator and maintenance manuals in both digital and hard copy. Equipment must be air deployable, qualify for military EPA exemptions, and be factory-tested prior to shipment. The North American Industry Classification System code is 333618 with a small business size standard of 1,500 employees, and the procurement is designated as a Total Small Business Set-Aside under FAR 19.5. Responses must include company name, address, CAGE code, SAM UEI, point of contact details, business size and socioeconomic status, estimated lead time, evidence of full capability, and post-sale support services. The government will not accept partial responses—companies must be able to support all requirements. All submissions must be sent via email to SSgt Landon Docherty and CC'd to Amanda McKaig by 10:00 AM EST on Thursday, July 9, 2026, using the specified subject line and limited to .pdf, .doc, or .xls attachments. The place of performance is Fort Moore, Georgia.

FA4830 23 Cons Cc

POSTED

about 7 hours ago

DEADLINE

Vacuum Generator Unit SupplyThe contract involves the supply of high-reliability vacuum generator units specifically designed for integration into marine sanitation systems aboard naval vessels, ensuring operational readiness and environmental compliance in demanding maritime conditions. These units are critical components that support the function of onboard waste management systems, requiring robust construction, resistance to saltwater corrosion, and consistent performance under the vibration and pressure extremes common in naval environments. The procurement is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 333618 indicating it falls under Other Commercial and Service Industry Machinery Manufacturing, reflective of specialized engineering and production standards. The contract was posted on August 9, 2026, and is linked to a specific delivery order identified by contract number SPE8E826F0693, tied to a master award SPE8E824D0002. While the place of performance and point of contact details are not specified, the nature of the deliverables implies that the units must meet stringent military specifications for durability, safety, and long-term reliability without requiring frequent maintenance. The subcontract nature suggests the prime contractor oversees integration and compliance, with the supplier responsible for manufacturing units that adhere to Navy-certified engineering controls and quality assurance protocols essential for defense applications.

Defense Logistics Agency

POSTED

DEADLINE

PARTS KIT, ENGINE FU

Solicitation # SPE7M4-26-T-327L

This contract is for the procurement of a Parts Kit, Engine Fuel, identified by NSN 2910-00-355-7669 and part number 5199734, with a quantity of 190 units. The item is classified as a critical application item and must be supplied by either Rolls-Royce Solutions America Inc or Federal-Mogul Corporation DBA, as specified. The contract mandates strict compliance with DLA packaging and preservation standards per MIL-STD-2073-1E, Appendix D, for kits, and requires marking consistent with MIL-STD-129 without special marking codes. Packaging must adhere to DLA’s procurement requirements including palletization guidelines, and all items must be delivered FOB origin with zero variance allowed in quantity. The delivery schedule allows 191 days from the contract award, with a required ship date of February 28, 2027, and an original delivery deadline of April 6, 2027. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols follow DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Suppliers must address potential casting or forging needs by submitting a request to DLA if special tooling is required. The procurement is conducted under a total small business set-aside, with the solicitation number SPE7M4-26-T-327L, and the unit of issue is each (EA). The unit price is $190.00, resulting in a total contract value of $36,100. Inspections and acceptance occur at the destination, and the contracting office is the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. All documentation and compliance obligations must align with the latest applicable versions of referenced standards in effect as of the solicitation or award date.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-U-0559

The contract solicitation SPE7L1-26-U-0559 is a Total Small Business Set-Aside issued by the Defense Logistics Agency under the Department of Defense for the procurement of a radiator core identified by NSN 2930015784859 and part number WWS RD-1-1965-0. It is structured as an Indefinite Delivery Contract with a maximum potential value of $350,000 and an estimated annual quantity of five units, though the stated quantity is non-binding and does not constitute a guaranteed purchase obligation. Delivery is required within 71 days of order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129 for labeling and barcoding, with DLA Master List of Technical and Quality Requirements taking precedence over all other standards. Palletization must comply with RP001, and all non-accepted supplies must have government identifiers removed per RQ011. The contract mandates compliance with numerous FAR and DFARS clauses covering employment equity, combating trafficking, hazardous material identification, cybersecurity, export controls, whistleblower protections, and restrictions on telecommunications equipment from Communist Chinese military companies. Invoicing must be submitted electronically through Wide Area WorkFlow, and offerors must hold a valid Unique Entity Identifier and CAGE code, with small business status confirmed via SAM. All proposals must be submitted electronically via the DLA Internet Bid Board System by the August 24, 2026 deadline. No specific unit price or extended pricing is provided, and detailed payment office or place of delivery information is deferred to the award document.

LAND SUPPLY CHAIN

POSTED

DEADLINE

LEVER ASSEMBLY, POWE

Solicitation # SPE7L5-26-T-4915

The contract pertains to the procurement of a lever assembly for power-speed control, identified by part number 9649-44 and NSN 2990-01-660-8702, with a total quantity of two units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. The item is designated as a critical application item and must not contain any Class I ozone-depleting chemicals; any substitute materials require prior approval unless explicitly authorized by specification. Packaging must conform to MIL-STD-2073-1E with specific methods, materials, and codes including pressurization, drying, and packaging type U, with marking fully aligned to MIL-STD-129 and no special marking codes. Palletization must adhere to DLA packaging requirements. Delivery is scheduled for 165 days after contract award with FOB origin terms, and inspection and acceptance occur at the destination. The quantity variance is strictly zero percent, meaning exact delivery of two units is mandatory. Shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, as specified, and transportation logistics follow DLAD Procurement Notes C19 and C20. The original required delivery date is February 3, 2027, with a needed ship date of February 2, 2027. The contract number is SPE7L5-26-T-4915, solicited under NAICS code 333618 by the Department of Defense’s Land Supplier Operations Engines, with Randy Ith as the primary point of contact. Unit of issue is each, with a unit price of $2.00 and total price of $4.00, and all data aligns with DoD authorized standards for procurement and logistics.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

BRACKET, ENGINE MOUN

Solicitation # SPE7L1-26-T-943R

The contract pertains to the procurement of one unit of a bracket for engine mounting, identified by NSN 2510-01-535-5219 and part number 106A0049, under solicitation SPE7L1-26-T-943R. Delivery is required within 10 days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. The item must be packaged in compliance with ASTM D3951 and fully marked and labeled according to MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence over any general packaging standards. The unit of issue is each, and the packaging must adhere to the specified Quantity per Unit Pack of 1. The delivery destination is Joint Base Lewis McChord, Washington, with shipment required via the fastest traceable means, excluding parcel post. All packaging and labeling must reflect the designated government delivery point and include the provided marking information, including the military freight identifier and project code. The contract enforces strict acceptance at destination and mandates conformance to all referenced technical and quality specifications referenced by R or I numbers from the DLA Master List. The original required delivery date is August 5, 2026, and the contract was posted on August 9, 2026, with responses due by August 20, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7MC-26-T-186X

A 4-inch gate valve with a wear-coated finish and drilled without sealing compound is being procured under a total small business set-aside contract, with 36 units required and a delivery timeline of 771 days after award. Each valve must have an securely attached identification plate clearly marked with CID 88A090075. The item is governed by strict export control regulations under ITAR or EAR, meaning its technical data may not be disclosed to foreign persons anywhere in the world without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, restricting access to only those DLA contractors certified under the US/Canada Joint Certification Program who have completed mandatory training on handling export-controlled technical data and received DLA approval. The NSN is 0001S00000053, linked to solicitation SPE7MC-26-T-186X, issued by the Defense Logistics Agency San Joaquin with a response deadline of August 20, 2026. Performance is to occur in Tracy, California, with primary point of contact Paula McClary, and the acquisition is structured under NAICS code 333618 for federal procurement.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

SEAL, CONICAL, FLARED TU

Solicitation # SPE7M3-26-T-8152

This contract specifies the procurement of conical flared tube seals, identified by part number AS4824A16 and NSN 4730-01-538-3942, manufactured in accordance with SAE AS4824B (R2015) Revision B dated 11/01/2007. Each package contains two seals and is designated as one package (1 PG = 2 EA), with a total quantity of 453 packages required. The item is classified as a critical application and must not contain any ozone-depleting chemicals; substitutes require prior approval unless explicitly authorized by the specification. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific instructions to keep seals enclosed in protective plastic vials during shipping to prevent damage. Marking must follow standard government protocols, with no additional special coding required. The contract mandates delivery within 88 days from the requirement date, with FOB origin terms, inspection and acceptance occurring at origin, and no variance allowed in quantity. The delivery address is DLA Distribution in Corpus Christi, Texas, with a need ship date of August 6, 2026, and an original required delivery date of March 12, 2027. The contract is subject to full and open competition, and the Certificate of Conformance procedure is authorized unless overridden by a quality assurance instruction. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision levels determined by the solicitation or award date. Transportation and shipping logistics must adhere to DLA Procurement Notes C19 and C20, and all unit of issue data aligns with DoD and ANSI X12 standards.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

ORIFICE PLATE ASSEMBLY

Solicitation # SPE7M4-26-T-328Q

The contract specifies the procurement of an orifice plate assembly with part number 5712-2PC and NSN 4820-00-911-1545, for a quantity of 157 units, under solicitation SPE7M4-26-T-328Q. Delivery is required within 164 days, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging materials, and the U pack code. The item is classified as a critical application item with a non-extendable shelf life of 120 months and is subject to DLA’s packaging and quality requirements as defined in their master list of technical and quality standards. Mercury and mercury-containing compounds are strictly prohibited unless part of approved functional components like batteries or sensors, and portable devices containing mercury must have a secondary containment as per NAVSEA 5100-003D. A Certificate of Quality Compliance is mandatory, and removal of government identification from non-accepted supplies is required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is February 2, 2027, with an original delivery due date of December 17, 2026. Unit of issue is each, priced at $157.00 per unit, totaling $24,649.00.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M4-26-T-328T

The contract is for the procurement of a fluid filter element with the NSN 2940-00-741-1081 and part numbers specific to approved vendors including Wheeler Fleet Solutions, Met-Pro Corporation, and Haldex Brake Products Corporation. A total quantity of 234 units is required, each unit priced at $234.00, resulting in a total contract value of $54,756. Delivery is mandated within 24 days from the order placement, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The filter element is designated as a critical application item, and strict compliance is required with DLA packaging standards, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applicable. Packaging must adhere to DLA’s RP001 requirements and be palletized accordingly. Mercury or mercury-containing compounds are prohibited in or in direct contact with the filter element except under specific exceptions for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or Navsea-specified reagents, with portable devices containing mercury required to be shockproof and have a secondary containment boundary consistent with NAVSEA 5100-003D. All supplies must be delivered to the DLA Distribution Depot Hill in Hill AFB, Utah, and transportation logistics are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7M4-26-T-328T, issued under NAICS code 336390 by the Department of Defense’s Fluid Handling Division, with a response deadline of August 21, 2026, and a required ship date of September 15, 2026, despite an original delivery date of February 3, 2027. The contract enforces full alignment with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the applicable revision is controlled by the solicitation issue date.

Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

SWIVEL JOINT, HYDRAULIC

Solicitation # SPE7M3-26-T-8155

A hydraulic swivel joint made of steel with a zinc plating and dichromate finish, or alternatively a clear trivalent chromate finish, is being procured under a total small business set-aside solicitation. The part features 3/4-16 37-degree SAE flare connections on both ends and measures 3.06 inches overall in length, with a specific part number assigned by Grove U.S. LLC and Oshkosh Defense LLC as approved sources. This is a critical application item requiring government engineering source approval and is subject to stringent technical and quality requirements referenced from the DLA Master List. The item is identified by NSN 4730-01-199-4583 and must be delivered in full compliance with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract calls for 303 units to be delivered FOB origin within 163 days, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the shipment must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The delivery is scheduled for February 1, 2027, with an original required delivery date of February 2, 2027, under solicitation SPE7M3-26-T-8155, and the unit price is $303.00 per each, totaling a contract value of $91,809.00.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

COUPLING HALF, QUICK

Solicitation # SPE7M3-26-T-8157

The contract is for 280 units of a 3/8 inch quick disconnect coupling half, specified by NSN 4730-01-412-5272 and referenced to a technical drawing titled "COUPLING HALF, QUICK DISCONNECT." All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Export control restrictions apply to technical data associated with this item under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including those within the United States. Access to this controlled data is restricted to DLA contractors with active US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approval from the DLA controlling authority. The solicitation, issued under number SPE7M3-26-T-8157 on August 10, 2026, with a response deadline of August 21, 2026, is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332996. Performance is required at New Cumberland, Pennsylvania, 17070-5002, with a delivery window of 105 days after award. The primary point of contact is William Cain from the Fluid Handling Division, Department of Defense, reachable via email and phone. The procurement is managed through the DLA’s electronic procurement portal, and all contractors must comply with DFARS 252.225-7048 regarding export control of technical data.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

COUPLING, SHAFT, RIGI

Solicitation # SPE7M4-26-T-329C

The contract pertains to the procurement of a rigid shaft coupling, part number 317090, manufactured by Eaton Aerospace LLC with CAGE code 62983, under solicitation SPE7M4-26-T-329C. A total of 30 units are required at a unit price of $30.00, with delivery scheduled for 164 days after award, FOB origin, and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent defense procurement standards, including the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. Compliance with MIL-STD-129 for marking and packaging is mandatory, and packaging must align with ASTM D3951 unless overridden by DLA requirements. Palletization must follow RP001 guidelines, and sampling protocols require zero non-conformances under MIL-STD-1916 or equivalent zero-based plans, with verification levels assigned based on attribute criticality. The supplier must hold a CMMC Level 2 self-assessment certification and handle Covered Defense Information as defined by RD002. Delivery is to be made to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of February 2, 2027, and an original delivery deadline of September 12, 2027. No quantity variance is permitted, and all packaging and labeling must strictly adhere to contract-specified unit of issue and quantity per unit pack.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-328Y

The contract specifies the procurement of seamless metallic tubing made from corrosion-resistant steel with a composition of 321, featuring an outer diameter of 0.500 inches and a wall thickness of 0.028 inches, delivered in random lengths between 8 and 16 feet. The tubing must comply with the MIL-T-8606C(2) specification and meet the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including the applicable QAP 13873. The item is classified as a commercial item and a critical application item, requiring full and open competition. All materials must adhere to strict manufacturing and inspection standards, including compliance with MIL-STD-1916 or ASQ Z1.331 for sampling, with zero non-conformances required unless otherwise specified, and must be verified through a Certificate of Quality Compliance as mandated by contract clause 52.246-9000. Metal certification documentation is required and must be submitted as per CDRL-METALSCERT. Packaging and delivery must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with preservation performed in accordance with MIL-S-163 using Type B or C preservatives as applicable. Each master lift is limited to 2000 pounds gross weight, and packaging must not include Class I ozone-depleting chemicals. Marking is required per MIL-STD-129 with no special marking codes. The delivery point is FOB origin with inspection and acceptance also occurring at origin, and the quantity of 1,207 linear feet may vary by plus or minus 10%. The required delivery date is January 12, 2027, with a need ship date of February 2, 2027, and full delivery must be completed within 164 days. The item is identified by NSN 4710-00-540-6722 and purchase request 7017779049, with final delivery directed to DLA Distribution at Robins Air Force Base, Georgia. All documentation and compliance are subject to the latest revisions of referenced standards effective on the solicitation or award date, as applicable.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-328R

The contract is for the procurement of 2,405 units of a grooved pulley identified by NSN 3020002771123 and part number MS20220-2, designated as a critical application item and classified as a commercial item. The product must comply with stringent technical and quality requirements outlined in MIL-DTL-7034/2B and MIL-DTL-7034F(2), with adherence to TDP Revision B General 2 and reference drawing 200415485. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards unless explicitly overridden by the contract. Sampling and inspection are strictly controlled under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned predefined verification levels or AQLs. The item is subject to qualification under the Qualified Products List or Qualified Manufacturers List and must be packaged and labeled in compliance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements. Delivery is FOB origin with a 164-day lead time and must arrive by February 2, 2027, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the contract is awarded under a HUBZone Set-Aside with a primary point of contact at the Department of Defense’s Fluid Handling Division.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-328M

The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

PLUG, QUICK DISCONNE

Solicitation # SPE7M3-26-T-8158

This contract pertains to a commercial quick disconnect plug identified by part number 155-39-12D, manufactured by SATAIR A/S and also available from Eaton Aeroquip LLC and Jaidinger Mfg Co Inc, designed for use on F/A-18 Hornet and S-3A Viking aircraft. The item is constructed from aluminum alloy with an external thread and includes a chain, and it is classified as a critical application item with destination inspection and acceptance points. Packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and marking must adhere to MIL-STD-129 with special marking code 24 indicating open inspection or use. Packaging is subject to DLA’s Reduced Plastic Packaging Initiative, requiring minimal plastic use without compromising protection. The item is procured under solicitation SPE7M3-26-T-8158, a Women-Owned Small Business Set-Aside, with a required delivery of 312 units within 125 days of award, delivered FOB origin. The NSN is 4730-01-394-3297, and the unit of issue is each. Delivery must be made to DLA Distribution Jacksonville at the specified address, with freight details governed by DLA procedures C19 and C20. The original required delivery date is January 4, 2027, with a need ship date of December 25, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and pricing is set at $312.00 per unit for a total contract value of $97,344.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-26-T-328S

This contract pertains to the procurement of a nonmetallic hose assembly identified by NSN 4720-01-482-7562, with a requirement for eight units to be delivered within 101 days to the designated receiving warehouse in Tracy, California. The product must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, specifically incorporating technical identifiers R and I, and adhere strictly to DLA packaging guidelines as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking and packaging. The hose assembly is governed by SAE AS117K and SAE AS1339K standards and is listed on a Qualified Products List or Qualified Manufacturers List, requiring sourcing only from qualified suppliers. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the referenced specifications. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise stated, and attributes are evaluated using defined verification levels or AQLs. The item is designated as a critical application component, and delivery is FOB origin with no variance allowed in quantity. The contract mandates adherence to DLA freight and transportation procedures, with a firm delivery deadline of April 23, 2027, though an earlier ship date of December 1, 2026, is requested. No shelf life restrictions apply to this material.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-329D

The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE