This Government Contract opportunity from Department Of Defense was posted on September 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Engine Fuel Tank Manufacturer

Closed

Federal

Submission Closed09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336390

New

DIBBS

Supply of Tie Rod End, Steering (NSN 2530008153157)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Brake, Shoe Type (NSN 2530-01-602-7974)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Vehicular Anti-Lock Brake (ABS) Sensor SupplierThis subcontract involves the supply of two vehicular anti-lock brake sensors for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing sensors identified by NSN 2530-01-654-6932 and PN 024-204-00, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The agreement mandates strict compliance with the Buy American Act and prohibits the use of additive manufacturing unless specific authorization is granted. Performance for this contract is centered at Fort Leonard Wood, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sealed Lead Acid (Wet) Storage Batteries

Defense Logistics Agency

POSTED

DEADLINE

Manufacturing and Supply of Vehicular Equipment Kit (NSN 2541017279469)This subcontract involves the manufacturing and supply of one complete Vehicular Equipment Kit, identified by NSN 2541017279469, for prime contractors supporting DLA Weapons Support projects. The contractor is required to produce part pieces in strict accordance with TDP Rev C Gen 6 and specific reference drawings 19207 12422608 and 19207 12414308. All materials must be certified as asbestos-free and manufactured without the use of Class I ozone-depleting chemicals, with final packaging adhering to MIL-STD-2073-1E standards. Managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations, the project falls under NAICS code 336390. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

HMMWV Mounting Cap and Storage Assembly FabricationThis subcontract involves the fabrication and delivery of a complete mounting cap unit for HMMWV vehicles to support DLA Weapons Support Land Supply Chain contracts. The scope of work includes the fabrication of the main cap, the integration of a bulkhead kit and side storage compartments, and the application of a sand-color industrial coating. The final deliverable consists of one fully completed mounting cap unit inclusive of all storage and bulkhead components. The contractor must adhere to strict regulatory and environmental standards, including the prohibition of Class I ozone-depleting chemicals and compliance with NIST SP 800-171. Additionally, the provider is required to meet all domestic material disclosure requirements. Performance for this project is centered in Dagsboro, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Vehicular Body Panel SupplierThis subcontract involves the procurement of 110 units of Vehicular Body Panels, identified by NSN 2510015363578, to support prime contractors under DLA supply contracts. The selected supplier is responsible for the fabrication or procurement of these panels in strict accordance with NSN specifications. Quality assurance is a critical component of the agreement, requiring sampling and inspection performed per MIL-STD-1916 or ASQ H1331, with final packaging completed according to MIL-STD-2073-1E. Managed by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 336390. The place of performance is located in Texarkana, Texas. Interested parties must have submitted responses by the deadline of November 16, 2026, to provide the finished and packaged components as required.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

GUARD, BRUSH, VEHICULAR

Solicitation # SPE7L4-27-T-0759

This procurement, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a request for quotations for one vehicular brush guard, identified by NSN 2540016117191 and part number 347/11094 from JCB Inc. The required delivery date is November 3, 2026, with a delivery window of five days after receipt of order. The shipment is designated as FOB Origin, with the final destination and inspection point located at Fort Campbell, Kentucky. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be packaged according to ASTM D3951, while hazardous materials require packaging per TQ requirement IP025. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and prohibiting certain telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3358

Solicitation SPE7L1-27-T-3358 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 117 alloy steel forging pintle hook latches, identified by NSN 2540-01-500-0309. The items must be delivered within 215 days after the award, with the delivery point located at DLA Distribution Red River in Texarkana, Texas. The procurement is conducted under the First Destination Transportation program with FOB Origin terms. Technical data for this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access the data. The contract requires strict adherence to quality and inspection standards, including Government Source Inspection and a first article test of one unit. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. While the solicitation is listed as a total small business set-aside in some metadata, the specific RFQ text indicates it is not a small business set-aside. Quotations must be submitted via the DIBBS portal by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M3-27-T-0821

Solicitation SPE7M3-27-T-0821 is a small business set-aside request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 22 wrought copper straight pipe-to-tube adapters. The items must be 1.00 inch nominal size, FTG X MNPT, and consistent with NIBCO 60421. This is a commercial off-the-shelf procurement under NAICS code 336390, with the required delivery date set for October 30, 2026, and a delivery window of 20 days after receipt of order. The contract specifies FOB Origin terms with inspection and acceptance occurring at the destination, specifically Hill AFB, Utah. Packaging must comply with RP001 and ASTM D3951, while marking and labeling must adhere to MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity reporting under DFARS 252.204-7012.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3269

Solicitation SPE7L1-27-T-3269 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 20 steel engine fuel tanks. These tanks are designated as critical application items and must have a 1-1/2 U.S. gallon capacity with specific rectangular dimensions of 10-3/4 inches in length, 5-5/8 inches in width, and 6-3/8 inches in height, adhering to Briggs and Stratton Corp part numbers 291488 and 292367. The required delivery date is November 6, 2026, with a delivery lead time of five days. Shipping is FOB Origin, and the final destination is the Government of Israel Ministry of Defense. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the point of origin. The procurement incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Offers involving additive manufacturing are ineligible for award. Quotations must be submitted by November 16, 2026, and invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

COVER, FITTED, VEHICULAR

Solicitation # SPE7L4-27-T-0755

Solicitation SPE7L4-27-T-0755 is a small business set-aside procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for one fitted vehicular body cover, identified by NSN 2540-01-642-9268. The contract requires delivery to Fort Irwin, California, with a required delivery date of November 2, 2026, and a delivery window of five days after receipt of order. Terms are established as FOB Origin, and the procurement includes a price evaluation preference for HUBZone small business concerns. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for component qualification via Qualified Products Lists or Qualified Manufacturers Lists. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-129 for marking and labeling, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025 and FED-STD-313. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

in 13 days

AI Contract Overview

This subcontract opportunity is for the manufacture of engine fuel tanks to be delivered to Land Supplier Opns Engines within the Department of Defense. The selected manufacturer will be responsible for fabricating tank structures using industrial metal fabrication equipment and traditional methods including stamping, welding, and casting, though additive manufacturing is strictly prohibited. All production must adhere to the RA001 DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 336390 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 28, 2026, following the posting date of September 16, 2026.

General Info

Manufacture engine fuel tanks for DoD in Pennsylvania; responses due September 28, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L5-26-T-5533.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TANK, FUEL, ENGINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 16

subcontract

Response DeadlineSep 28

Deadline has passed

Submission Closed

09/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

Office AddressN/A

ContactsNo contact information available

Full Description

Manufactures engine fuel tanks for prime contractors delivering to LAND SUPPLIER OPNS ENGINES. Fabricates tank structures using traditional methods such as stamping, welding, and casting; additive manufacturing is prohibited. Adheres to RA001 DLA Master List of Technical and Quality Requirements. Utilizes industrial metal fabrication equipment. Delivers completed engine fuel tanks.