Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Engine Lathe Equipment Supplier

Active

Federal

Response Deadline09/21/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Office of Centralized Acquisition Services for the General Services Administration, requires the supply of three engine lathes, including Standard and Toolroom/Precision models with horizontal spindles. Each machine must meet specific Technical Matrix specifications and include one removable steady rest and two removable toolholders. The supplier is responsible for providing comprehensive technical data in both electronic and hard copy formats. The contract is designated as a Total Small Business Set Aside under NAICS code 333517. All equipment and deliverables must strictly comply with industry standards, including ASME, ANSI, NEMA, ISO, ASTM-D-3951, and MIL-STD-129. The final delivery consists of three fully equipped engine lathes accompanied by all required documentation.

General Info

GSA subcontract for three engine lathes meeting specific technical and industry standards.

Agency

General Services Administration → Office Of Centralized Acquisition ServicesView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

DC

Set-Aside

SBA

Documents

This scope was carved out of 47QACA26Q0392.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Engine Lathe - Amendment 0003

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 06:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Office Of Centralized Acquisition Services

ContactsNo contacts available

OfficeN/A

Organization / Agency

General Services Administration → Office Of Centralized Acquisition Services

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies three engine lathes (Standard and Toolroom/Precision, Horizontal Spindle) for prime contractors on GSA supply contracts. Provides machines meeting Technical Matrix specifications, including two removable toolholders and one removable steady rest per machine. Supplies technical data in hard and electronic copies. Ensures compliance with ASME, ANSI, NEMA, ISO, ASTM-D-3951, and MIL-STD-129. Delivers three fully equipped engine lathes with documentation.

Similar Contracts

Same NAICS industry code

Engine Lathe - Amendment 0003

Solicitation # 47QACA26Q0392

Solicitation 47QACA26Q0392 is a Request for Quote for a firm-fixed-price supply contract to provide three engine lathes for the United States Air Force Life Cycle Material Command. This acquisition is conducted under FAR Parts 12 and 13 as a total small business set-aside. The requirement consists of two product CLINs: two lathes for Cannon AFB, NM, and one lathe for Travis AFB, CA. All unit prices must be quoted as FOB Destination, including all shipping, freight, and handling costs, as no separate shipping CLIN is provided. The deadline for quotation submission is September 4, 2026, at 2:00 PM Eastern Time. The engine lathes must meet specific technical requirements, including a spindle speed of 125 to 3000 RPM, an 11-inch swing over bed, and an 18-inch center to center distance. Each machine must include a minimum of two removable toolholders conforming to ISO 13399, a removable steady rest, a quick-change tool kit, and a minimum one-year warranty. Safety features such as an emergency stop switch, gearbox overload protection, and an interlocked chuck guard are mandatory. Delivery must be completed within 365 days after receipt of order, with inspection and acceptance occurring at the destination. Award will be based on the Lowest Price Technically Acceptable (LPTA) method. The government will rank quotes by aggregate price and evaluate the lowest bidder on a pass/fail basis regarding technical compliance. To be considered, offerors must submit a completed technical matrix, the revised pricing spreadsheet from Amendment 0001, and supporting literature via email to the contracting officer. Packaging must comply with ASTM-D-3951 and MIL-STD-129 standards, and all shipments must be documented through the ASSIST collaboration tool.

Office Of Centralized Acquisition Services

POSTED

about 4 hours ago

DEADLINE

Carbide Grinding Machine SupplierThis subcontract opportunity with the Defense Logistics Agency involves the manufacture or procurement of one carbide-capable grinding machine designed for prime contractors delivering DLA supply contracts. The selected supplier must ensure the equipment meets all technical specifications and is delivered as a fully functional unit. The contract requires strict adherence to regulatory standards, specifically DFARS 252.223-7008 concerning Hexavalent Chromium and DFARS 252.225-7048 regarding export-controlled items. This requirement falls under NAICS code 333517, with a response deadline of September 28, 2026.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Solicitation # W911S226U4259

The Department of Defense, through the W6QM Micc-Ft Drum office, is seeking a provider for various tools under solicitation number W911S226U4259. This combined contract is designated as a Total Small Business Set Aside under NAICS code 333517. The procurement is managed by Anthony Zyla, and the place of performance is located in the 22211 zip code area. The solicitation was posted on August 26, 2026, with a response deadline of September 3, 2026. Interested parties must refer to the attached solicitation documents for the full listing of required items. The contracting office is based in Fort Drum, New York.

W6QM Micc-Ft Drum

POSTED

DEADLINE

in about 12 hours

140-ton 10-foot Hydraulic Press Brake

Solicitation # W50S7L-26-Q-A004

Solicitation W50S7L-26-Q-A004 is a 100 percent Small Business Set-Aside for the procurement of one new Industrial CNC Hydraulic Press Brake with a capacity of 140 to 150 tons and a minimum 10-foot bending bed. The requirement is divided into two firm-fixed-price CLINs: the first for the machine itself and the second for turnkey logistics, including freight, rigging, installation, and operator training. The equipment must be manufactured in the United States, a DFARS qualifying country, or a TAA-compliant country, with a specific exclusion of equipment manufactured in the People's Republic of China. Key technical specifications include a maximum assembled footprint of 13 feet, a minimum weight of 14,000 lbs, and an integrated 2-axis CNC controller. The project will be performed in Great Falls, Montana, at Building 80 Aircraft Structural Maintenance shop. The government will provide the electrical drop and an on-site electrician for final connections, while the contractor is responsible for rigging and anchoring the machine to a flat concrete surface. Personnel requiring facility access must possess a Real ID and EAL. While the preferred delivery target was November 30, the government will evaluate technically compliant quotes with a firm delivery and installation completion date on or before December 31, 2026, with a final required delivery date updated to January 31, 2026. Award will be based on best value, and offerors must provide a completed pricing schedule, technical capability statement, and proof of TAA compliance.

W7NK Uspfo Activity Mtang 120

POSTED

DEADLINE

in about 24 hours

CNC Abrasive Waterjet - Amendment 0002

Solicitation # 47QACA26Q0394

The General Services Administration is conducting an unrestricted combined synopsis and solicitation under FAR Parts 12 and 13 to acquire six Computer Numerical Control CNC abrasive waterjet machining centers for the Department of the Air Force, Air Force Life Cycle Management Center. These systems must be manufactured within the United States and are capable of cutting various materials, including mild steel at least 4 inches thick. The machines will be deployed to six distinct global locations across CONUS and OCONUS. The procurement includes the delivery of hardware, 2-D and 3-D functional software with additional licenses, and specific accessories such as replacement nozzle bodies. The award will be based on the Lowest Price Technically Acceptable LPTA process, where quotations are ranked by total aggregate evaluated price and then assessed on a pass/fail basis for technical acceptability. Key requirements for technical acceptance include a delivery schedule not exceeding 365 days after receipt of order and the submission of a completed technical matrix with supporting product literature. All equipment must comply with US Department of Labor 29 CFR 1910 safety standards and UL certification for distribution panels. Packaging must adhere to ASTM-D-3951 and ISPM-15 heat-treatment standards for wood materials. Amendment 0002 clarified that referenced part numbers in the technical documents are for reference only and are not mandatory brand-name requirements.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

DRILLING MACHINE, UPRIG

Solicitation # SPE8E5-26-T-4177

Solicitation SPE8E5-26-T-4177 is a total small business set-aside issued by DLA Troop Support for the procurement of one upright drilling machine, identified by NSN 3413-01-315-4541. The equipment is designated as a critical application item and must include specific accessories such as an electrical package, work light, swivel vise, Jacobs chuck, number 2 arbor with key, extra drive belt, and three Allen wrenches. The procurement is based on FOB Origin terms with a required delivery date of April 21, 2027, and a delivery lead time of 167 days. Shipping is directed to DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to technical and quality requirements, including the prohibition of intentionally added mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1 and 52.246-2. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.

JACKSONVILLE BLDG

POSTED

DEADLINE

Rubberflex Collet and Form-Line Tooling SupplyThis subcontract involves the supply of Rubberflex collet systems and Form-Line compatible die sets for prime contractors operating on US Air Force projects at Luke Air Force Base. The primary objective is to provide specialized tooling that meets USAF-inventory Form-Line specifications to ensure compatibility for the fabrication of high-pressure hydraulic lines for the F-35A Lightning II. The opportunity is designated as a total Small Business Set Aside under NAICS code 3335117 and is managed by the Department of Defense agency FA4887 56 Cons Cc. Performance will take place at Luke Air Force Base in Arizona, with a response deadline set for September 17, 2026.

FA4887 56 Cons Cc

POSTED

DEADLINE

Fully Electric CNC Tube Bender Machine SupplyThis subcontract, issued by the Department of Defense under the FA4887 56 Cons Cc agency, requires the supply of one fully electric CNC tube bender machine for prime contractors operating at Luke Air Force Base. The equipment must be specifically designed for the fabrication of F-35A Lightning II high-pressure hydraulic lines and must be natively compatible with USAF-inventory Form-Line tooling and die sets, including the integration of a Rubberflex collet system. The procurement is designated as a Total Small Business Set Aside under NAICS code 333517. The successful provider must deliver one operational machine that adheres to the salient characteristics outlined in Section J of the contract documentation.

FA4887 56 Cons Cc

POSTED

DEADLINE

Tube Bending and Flare Tube Machines Luke AFB, AZ

Solicitation # FA488726Q0064

Solicitation FA488726Q0064 is a Firm Fixed Price requirement for the procurement of two industrial metalworking machines to support F-35A Lightning II hydraulic line fabrication for the 56 EMS Squadron at Luke Air Force Base, Arizona. The requirement consists of one fully electric CNC tube bender featuring the Bend Pro G2 Control System and a Rubberflex collet system, and one pneumatic double-flaring machine capable of generating 37-degree double flares using standard shop air. The tube bender must be natively compatible with existing USAF Form-Line tooling and include critical safety features such as a mobile industrial floor console and an integrated front-facing proximity laser scanner. The flaring machine is essential for aircraft safety, as non-approved flaring methods pose a severe risk of in-flight hydraulic failure. The contract is unrestricted, though it allows for HUBZone price evaluation preferences. Award will be granted to the technically acceptable offeror with a Green or better Supplier Performance Risk System rating and the lowest Total Evaluated Price. Technical acceptability is based on a technical approach that demonstrates compliance with salient characteristics without simply restating the requirements. The successful contractor must provide a minimum 12-month warranty, remote maintenance, and three days of on-site installation and training. Delivery for the flaring machine is required by December 31, 2026, with shipping terms set as FOB Destination. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

FA4887 56 Cons Cc

POSTED

DEADLINE

Flaring and Beading Machines - Amendment 0002

Solicitation # 47QACA26Q0393

Solicitation 47QACA26Q0393 is a Request for Quote for a firm-fixed price supply contract to provide seven flaring and beading machines for the United States Air Force Life Cycle Material Command. These machines are required to widen pipe ends and form raised edges to strengthen structures, featuring pneumatically operated jaws and specific capabilities for squaring, deburring, flaring, and beading across various outer diameters and wall thicknesses. The acquisition is conducted by the General Services Administration under FAR Parts 12 and 13 and is designated as a total small business set-aside. The award will be based on the Lowest Price Technically Acceptable procedure, with technical acceptability determined on a pass/fail basis against salient characteristics, a technical matrix, and a required tooling package. Delivery is specified as FOB Destination to multiple locations, including Cannon, Shaw, and Little Rock Air Force Bases, with a performance period of 365 days after receipt of order. All shipments must adhere to ASTM-D-3951 packaging standards and MIL-STD-129 marking for Department of Defense deliveries. Following Amendment 0001, the revised deadline for quotation submission is September 3, 2026, at 2:00 PM Eastern Time.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

Mill and Lathe Purchase

Solicitation # 80NSSC26939752Q

Solicitation 80NSSC26939752Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of precision machining equipment for the NASA Glenn Research Center. This brand-name requirement is set aside for small businesses under NAICS code 333517 and is estimated at 120,125.00 dollars. The acquisition specifically requires two Clausing Model 3VS08 10 by 54 inch vertical milling machines and one Clausing Model 8044VSJ gap bed lathe. This specific brand is required to ensure compatibility with existing tooling and machining capabilities within the Engine Research Building to avoid additional costs and training. The lathe must include a 12 kVA input transformer for 208 V 3-phase power and a 2-axis digital readout system that is installed, aligned, and calibrated prior to delivery. Delivery is FOB Destination to Brookpark, Ohio, with an estimated lead time of September 1, 2026. Award will be made to the responsible offeror with the lowest price technically acceptable offer. Quotes must be submitted via email to Sara Jusino-Terry by September 16, 2026, and all offerors must be registered in the System for Award Management to be considered.

NASA Shared Services Center

POSTED

DEADLINE

MC Machinery Press Brake - Model BB6020 or Equal with Installation and Training

Solicitation # FA480926Q0088

Seymour Johnson Air Force Base is soliciting bids under solicitation number FA480926Q0088 for the procurement, installation, and training of one MC Machinery Press Brake Model BB6020 or an equivalent system. This requirement is categorized under NAICS code 333517 and is designated as a total small business set-aside. The equipment is intended for aircraft structural maintenance to replace manual hand-forming processes and must feature CNC controls, servo motors with 0.001-inch repeatability, automatic thickness detection, and a rear safety fence with interlock. The system must operate via compressed air or 220v power and cannot utilize a hydraulic system. The contract is a firm fixed price agreement requiring an 18-month parts and labor warranty. Awardees must provide the equipment, perform the installation at Seymour Johnson AFB, and conduct in-person training. Bidders are required to submit itemized pricing, delivery lead times, and proof of authorized OEM reseller status to the designated points of contact. Evaluation for the award will be based on a best-value determination considering price, past performance, and technical capability. All submissions must be completed by the response deadline of September 14, 2026, with an anticipated delivery schedule of October 30, 2026.

FA4809 4TH Cons Squadron Cc

POSTED

DEADLINE

More opportunities from General Services Administration → Office Of Centralized Acquisition Services

Same awarding agency

Heavy Machinery Freight and Delivery ServicesThis subcontract, titled Heavy Machinery Freight and Delivery Services, is issued by the General Services Administration's Office of Centralized Acquisition Services as a total small business set-aside under NAICS code 484220. The contractor is responsible for the transport and delivery of three engine lathes for prime contractors on GSA supply contracts, utilizing heavy-haul trucking and flatbeds on an FOB Destination basis. The contractor must ensure all packaging adheres to ASTM-D-3951 and that marking complies with MIL-STD-129 for Department of Defense destinations. Additionally, the provider is required to upload all necessary shipping documentation via the ASSIST Collaboration tool and ensure all required paperwork accompanies the lathes to their final destinations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

Regulatory Compliance & Privacy AssuranceThe Regulatory Compliance and Privacy Assurance subcontract, issued by the General Services Administration's Office of Centralized Acquisition Services, focuses on ensuring strict adherence to federal standards. The primary objective is to maintain compliance with FISMA Moderate, Section 508, FERPA, and the Privacy Act. To achieve these goals, the contractor will implement comprehensive data controls, accessibility features, and privacy-preserving AI technologies. This effort falls under NAICS code 541618 and was posted on August 14, 2026.

Other Management Consulting Services

POSTED

about 1 month ago

DEADLINE

Data Export & Transition Support ServicesThe Data Export and Transition Support Services subcontract, managed by the General Services Administration's Office of Centralized Acquisition Services, focuses on the comprehensive export of data, metadata, and business rules using open formats. The primary objective is to ensure a seamless future contractor transition through the provision of robust APIs and detailed documentation. This engagement is categorized under NAICS code 541611 and was posted on August 14, 2026. The contract emphasizes technical interoperability and transparency to prevent vendor lock-in and facilitate the efficient transfer of operational knowledge and digital assets.

Administrative Management and General Management Consulting Services

POSTED

about 1 month ago

DEADLINE

Audit Logging & System Accountability ImplementationThe Audit Logging and System Accountability Implementation subcontract, issued by the General Services Administration's Office of Centralized Acquisition Services, focuses on the development of a secure logging framework. The primary objective is to implement tamper-resistant and exportable audit logs that capture all system actions, AI-driven decisions, and human reviews to maintain strict accountability and regulatory compliance. Posted on August 14, 2026, this project falls under NAICS code 541519 for Other and Unclassified Computer Related Services. The contract ensures that all critical operational data is preserved in a manner that supports transparency and oversight within the system's architecture.

Other Computer Related Services

POSTED

about 1 month ago

DEADLINE

Cloud Deployment & FedRAMP-Compliant IntegrationThis subcontract, managed by the General Services Administration's Office of Centralized Acquisition Services, focuses on the deployment and configuration of an AI solution within the Department of Education's FedRAMP-authorized cloud environment. The primary objective is to ensure the system operates entirely in-boundary, eliminating any external dependencies to maintain strict security and compliance standards. The project is categorized under NAICS code 541512 and was posted on August 14, 2026. It requires a specialized integration process to meet federal cloud authorization requirements, ensuring that the AI deployment adheres to the rigorous security protocols mandated for government cloud environments.

Computer Systems Design Services

POSTED

about 1 month ago

DEADLINE

AI-Powered Complaint Classification Engine DevelopmentThe Office of Centralized Acquisition Services within the General Services Administration is seeking a subcontractor for the AI-Powered Complaint Classification Engine Development project. The primary objective is to create and integrate an AI-native classification engine capable of automatically analyzing complaint narratives to determine legitimacy, urgency, and protected classes, while providing high-precision triage recommendations. This subcontract falls under NAICS code 511210 and was posted on August 14, 2026. The project focuses on achieving high precision and recall in the automated analysis of narratives to streamline the complaint handling process.

Software Publishers

POSTED

about 1 month ago

DEADLINE

Virtual Career Fair & Recruitment Campaign SupportThis contract involves planning and executing virtual job fairs and targeted recruitment campaigns specifically for federal agencies, utilizing the Handshake platform to facilitate outreach and manage logistics. It is structured as a subcontract under the General Services Administration's Office of Centralized Acquisition Services, with the primary performance location in Washington, D.C. The contract focuses on supporting federal hiring needs by leveraging digital tools to connect agencies with potential candidates effectively. The scope includes coordinating event details, managing campaign strategies, and ensuring successful engagement between agencies and job seekers. The work aligns with NAICS code 561320, which covers temporary help services, indicating an emphasis on recruitment and staffing solutions.

Temporary Help Services

POSTED

DEADLINE

AI-Powered Job Matching Engine SupportThis contract involves supporting the development and refinement of AI and machine learning algorithms designed to match student profiles with federal job opportunities listed on USAJOBS. The scope includes not only the training of models but also implementing bias mitigation strategies to ensure fairness and accuracy in job matching. The work is subcontracted under the NAICS code 541511, which pertains to custom computer programming services. The contract is managed by the Office of Centralized Acquisition Services within the General Services Administration, with the place of performance specified as Washington, DC (zip code 20415). Although certain details such as solicitation number and set-aside status are not provided, the focus is clearly on enhancing a job matching engine powered by AI to better align educational backgrounds with federal employment openings, streamlining the hiring process for students seeking government positions.

Custom Computer Programming Services

POSTED

DEADLINE

Accessibility Compliance & Section 508 RemediationThe contract focuses on ensuring full Section 508 compliance for the Handshake platform, which includes making the platform accessible across mobile devices, compatible with screen readers, and formatted with accessible content standards. This effort aims to improve usability for individuals with disabilities by adhering to federal accessibility requirements. Issued as a subcontract under NAICS code 541330, the contract is managed by the General Services Administration's Office of Centralized Acquisition Services. The performance location is specified as Washington, with the contract posted on May 19, 2026. The initiative underscores the government's commitment to accessible technology and digital inclusivity within its web platforms.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS