Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Engine Starter Cartridge

Active
FA821326R3047Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Government is seeking to acquire Engine Starter Cartridges under a firm-fixed price contract for use in USAF AGM-86 Air Launched Cruise Missiles, with the solicitation numbered FA821326R3047 issued by the Department of Defense through the FA8213 Aflcmc Ebhk office located at Hill AFB, Utah. The solicitation was posted on July 15, 2026, and responses are due by August 15, 2026, with the North American Industry Classification System code 325920 indicating the relevant manufacturing category. Prospective vendors must meet specific qualification requirements outlined in the JQR documents attached to the solicitation to be considered a technically acceptable source for award; failure to comply with these qualifications will disqualify a bid regardless of price competitiveness. The contract is open to interested parties, though the government retains the right to withhold solicitation issuance without notice. All inquiries should be directed to the primary point of contact, Jesse Whinham, or secondary contact Linna Wu, using the provided phone numbers and email addresses. Performance is expected to be fulfilled under the ZIP code 95023, though the exact location is unspecified.

General Info

US Government seeks engine starter cartridges for AGM-86 missiles via firm-fixed price contract, due August 15, 2026.

Agency

Department Of Defense → FA8213 Aflcmc EbhkView Agency

NAICS

325920 - Explosives ManufacturingView NAICS

Place of Performance

PacSci EMC 3601 Union Rd, Hollister, CA 95023, UT, 95023

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8213 Aflcmc Ebhk
Contacts2 people available
OfficeHILL AFB, UT, 84056-5820, USA
Organization / Agency
Department Of Defense → FA8213 Aflcmc Ebhk
View Agency Profile
Office AddressHILL AFB, UT, 84056-5820, USA

Full Description

Show more
This acquisition is to establish a firm-fixed price (FFP) contract. The United States Government (USG) intends to procure Engine Starter Cartridge for use in USAF AGM-86 Air Launched Cruise Missiles (ALCM). (25ALCM - Cruise Missiles LCHN).The USG reserves the right to not issue a solicitation in response to this Synopsis. Interested parties with questions may reach out to the Primary Contracting Officer as listed below.The JQR documents describing the required process needed to become qualified (as a requirement to be considered a technically acceptable source for award) are listed in the attachments below.

Similar Contracts

NAICS: 325920
New
Federal
Solicitation B2 Ctg Cad/Pad PartThis solicitation, FA8213-26-R-3052, issued by the Department of Defense through the FA8213 Aflcmc Ebhk office at Hill Air Force Base, Utah, seeks suppliers for Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PAD), classified as Critical Safety Items, to support aircraft egress systems. The contract requires full compliance with stringent military packaging and marking standards including MIL-STD-2073-1, MIL-STD-129, MIL-STD-130, and AFMCI 24-201, with specific requirements for Unique Item Identification using Data Matrix ECC 200 barcodes and mandatory inclusion of Manufacturer’s Part Number, Serial Number, Lot Number, and Julian Date of Manufacture. All items must be packaged to protect electrostatic sensitive devices using ANSI/ESD S20.20 compliant materials and labeled accordingly, while hazardous materials such as Line Item 0001 (NSN 1377-01-521-3457 ES) must adhere to DOT Class 1.4S and UN0173 shipping regulations under 49 CFR Parts 100-185. The acquisition is unrestricted with NAICS code 325920 and requires offerors to be pre-qualified sources, with new applicants submitting detailed qualification packages prior to award. Proposals must be submitted by July 7, 2026, and are subject to evaluation under a best value source selection process where technical merit significantly outweighs price, though both factors are integral. The technical evaluation focuses on the offeror’s qualified vendor status, technical approach, quality control procedures, work breakdown structure, and realistic scheduling with defined milestones, all to be submitted in searchable digital formats compliant with Adobe Acrobat, Microsoft Word, and Excel. Pricing must be reasonable and supported by cost or pricing data per FAR provisions, with payment processing mandated through the Wide Area Workflow (WAWF) system using designated DoDAACs and document types based on CLIN structure. Contract administration requires adherence to numerous FAR and DFARS clauses, including provisions for changes, termination, bankruptcy, disputes, and liability limitations, with additional compliance obligations under NIST SP 800-171 for cybersecurity and CUI protection, Buy American Act requirements, Defense Priorities and Allocations System, and Organizational Conflict of Interest rules. All deliverables
FA8213 Aflcmc Ebhk

POSTED

1 day ago

DEADLINE

in 25 days
View Details
NAICS: 325920
New
Federal
C17 FEC PartThe solicitation FA8213-26-R-3054 for the C17 FEC Part is issued by the Air Force Sustainment Center at Hill Air Force Base, Utah, with a response deadline of August 14, 2026, and a posted date of July 15, 2026. Offers must be submitted electronically to Tyson Tharp at tyson.tharp@us.af.mil, with proposals exceeding 10MB requiring either multiple emails or a pre-requested DoD SAFE link at least 24 hours prior to the deadline. Offerors are responsible for ensuring successful delivery and are strongly encouraged to obtain an email receipt acknowledgment. The contract has no set-aside and falls under NAICS code 325920, with performance required at Hill Air Force Base, Utah. Technical evaluation is the primary factor in award determination, assessed through adjectival ratings for Qualified Vendor and Schedule, with technical merit significantly outweighing price in the best value trade-off. Price is evaluated for reasonableness but does not drive the decision; the award will follow FAR best value procedures, not lowest price technically acceptable. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129R, MIL-STD-130 for Unique Item Identification, and MIL-STD-147E, with hazardous materials governed by DOT, IATA, IMDG, and AFMAN 24-604 standards. Wood packaging must meet ISPM 15 with the IPPC mark. All items must carry Human Readable Information and Machine Readable Data Matrix codes per MIL-STD-130, including CAGE code, lot number, and serial number. ESD-sensitive items require compliant packaging per ANSI/ESD S20.20 and MIL-HDBK-773B. Inspection and acceptance are conducted by government personnel at the delivery point, with rework governed by Clause ES7034. The contractor must provide a Work Breakdown Structure, milestones, and monthly performance reports, aligned with the Statement of Objectives for aircraft egress system components. No contract value, CLIN pricing, or contract type is specified. Payment office, accounting codes, invoicing method, and COR information are not provided. Offerors must complete required representations and certifications per Section K, including CAGE code for item traceability. Compliance with AS9100 or
FA8213 Aflcmc Ebhk

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 325920
New
Federal
Radford Army Ammunition Plant - DRAFT SolicitationThe Draft Request for Proposal #3, identified as W519TC-26-R-A046, seeks industry proposals for the production of propellants and the operation and modernization of the Radford Army Ammunition Plant under a single Indefinite Delivery, Indefinite Quantity (IDIQ) contract structured with a five-year base period, a five-year evaluated option exercised at award, and two additional unevaluated 10-year options that could extend the maximum performance period to 30 years. The contract encompasses a broad scope of mission-critical services, including environmental management, facility operations, fire protection, security and antiterrorism, maintenance, safety and industrial hygiene, utilities, technology and cybersecurity, and ground water monitoring, with certain functional areas merged or eliminated to streamline requirements. Direct-funded performance work statements drive the day-to-day operations, while separately funded Production Base Support initiatives enable modernization, rehabilitation, demolition, or relocation of government-owned production facilities through the Army Corps of Engineers. The contract also includes a firm, non-negotiable ceiling of $560 million for NC Fines Disposal Modernization, with the total estimated contract value projected at $20.144 billion, and pricing structured around plant-wide production volume tiers. Offerors must maintain a SECRET-level facility security clearance and comply with stringent NISPOM, AR 380-5, and OSHA standards, with full flow-down of safety and regulatory obligations to subcontractors and tenants, for which the prime contractor remains solely responsible. All proposals must be submitted electronically via PIEE by July 20, 2026, in specified formats—PDF for technical volumes and Excel for pricing—with no password protection and full compliance with SAM registration, FAR, DFARS, and unique deviations including the System for Award Management-Registration clause under Deviation 2026-00038 and Security Prohibitions under FAR 52.240-90. Evaluation will follow a best-value trade-off approach, prioritizing Technical (significantly more important than Past Performance, which in turn is significantly more important than Price) and requiring all non-price factors to achieve at least an Acceptable rating, with Other-than-Small Business offerors mandatorily submitting an acceptable Small Business Subcontracting Plan. Deliverables are governed by CDRLs, and production and packaging must adhere to MIL-DTL-244, MIL-STD-129, MIL-STD-1
W6QK Acc-Ri

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325920
New
International
5P435-275017 Avalanche Explosives RISOThe Government of Canada, through Public Services and Procurement Canada, is seeking vendors to enter into a Regional Individual Standing Offer for the supply and delivery of various explosive products used in avalanche control operations across national mountain parks, primarily in Alberta. This solicitation, identified as 5P435-275017 with solicitation number WS5712116979, is open to qualified suppliers who can reliably provide approved explosives on an as-needed basis to support public safety initiatives in remote and high-risk alpine environments. The North American Industry Classification System code for this procurement is 325920, indicating it falls under miscellaneous chemical product manufacturing. Proposals must be submitted by the strict deadline of July 14, 2026, at 2:00 PM Eastern Time, with no exceptions made for late submissions. The point of contact for inquiries is Amy Van Hereweghe of Parks Canada and Public Services and Procurement Canada, reachable via email at amy.vanhereweghe@tpsgc-pwgsc.gc.ca. Delivery performance is expected to occur across designated national mountain parks, with Alberta serving as the primary place of performance, though requirements may extend to other park locations as operational needs arise. Vendors are expected to meet stringent safety, regulatory, and logistical standards to ensure the secure handling, storage, and transportation of explosive materials in compliance with federal guidelines.
Department of Public Works and Government Services

POSTED

3 days ago

DEADLINE

in 5 days
View Details