Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Engineering Analysis and Technical Data Package (TDP) Development

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically NSWC Crane, focuses on Engineering Analysis and Technical Data Package development. The primary objective is to perform reverse engineering and failure analysis to create partial TDPs or SCDs, which are essential for obsolescence management and design refreshes in cases where complete technical data is missing. The project falls under NAICS code 541330 and is scheduled for posting on August 13, 2026. Performance of the contract is designated for location 19446.

General Info

DoD subcontract for reverse engineering and technical data package development for NSWC Crane.

Agency

Department Of Defense → Nswc Crane

NAICS

541330 - Engineering Services

Place of Performance

PA, 19446, USA

Set-Aside

NONE

Documents

This scope was carved out of N0016422GWS60.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SOLE SOURCE - Supplies and Services to support AN/ALQ-240(V)1 Electronic Support Measures (ESM) System, EA-18G AEA Suite, and AN/ALQ-99 Tactical Jamming System (TJS) - FSC/PSC L058 - NAICS 541330

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 13

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Crane

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Crane

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct reverse engineering, failure analysis, and develop partial TDPs or SCDs for obsolescence management and design refresh where full technical data is unavailable.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is soliciting proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This opportunity is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Sippy Aria, for further details regarding the submission process and project requirements.

Kiewit Infrastructure West Co.

POSTED

about 6 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide specialized professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this solicitation is Liz Jordan-Wettstein. This opportunity is specifically targeted toward DBE certified firms to support critical infrastructure resilience and disaster recovery documentation within the state of California.

Aanko Technologies Inc.

POSTED

about 6 hours ago

DEADLINE

Geotechnical Analysis and Stability ModelingThis subcontract for Geotechnical Analysis and Stability Modeling involves providing professional engineering analysis for prime contractors working on Upper Thames River Conservation Authority dam projects in Canada. The scope of work focuses on reviewing structural data and seepage at armour stone retaining walls, confirming embedment depths, and updating slope stability analyses utilizing the Slope/W model. The final deliverables for this engagement include comprehensive Geotechnical Reports and updated Slope/W models. To qualify for this contract, the service provider must hold a valid P.Eng license and ensure all work complies with the Ontario Accessibility Standards and the LRIA Technical Bulletin. Interested parties must submit their responses by November 18, 2026.

Upper Thames River Conservation Authority

POSTED

about 8 hours ago

DEADLINE

R.T. Orr Dam Geotechnical Investigations

Solicitation # 2026-05

The Upper Thames River Conservation Authority is soliciting proposals for geotechnical investigations and assessments of the R.T. Orr Dam located in Stratford, Ontario. The project, which initiates in 2026 and must be substantially completed by March 15, 2027, is based on recommendations from a 2023 Dam Safety Review by D.M. Wills Associates Limited. The scope of work includes reviewing existing structural data, conducting a detailed seepage investigation at the downstream left armour stone retaining wall, performing supplementary field investigations for embankment slope stability, installing two nested monitoring wells in both earth embankments, and updating stability analyses for armour stone structures. All work must adhere to the LRIA Technical Bulletin for Geotechnical Design and Factors of Safety and meet Ontario Accessibility Standards for electronic deliverables. Proposals must be submitted electronically via the bids and tenders platform by 3:00 PM Eastern Daylight Time on November 18, 2026. The selection process utilizes a two-envelope system where technical qualifications in Envelope A are evaluated before the cost proposal in Envelope B is opened. Award decisions are based on best value, considering experience, understanding of the work, proposed methodology, schedule, and cost reasonableness. Selected consultants must provide proof of professional licensing, WSIB standing, and required insurance policies, while maintaining strict confidentiality regarding project information.

Upper Thames River Conservation Authority

POSTED

about 8 hours ago

DEADLINE

Traffic Signal Installation Oversight and Quality AssuranceThe Traffic Signal Installation Oversight and Quality Assurance subcontract involves providing technical supervision and oversight for prime contractors working on regional signal synchronization projects for the City of Aliso Viejo. The selected provider will be responsible for conducting on-site field supervision to ensure that installation contractors adhere to approved plans, specifications, and estimates, as well as Caltrans signal installation standards. Key deliverables include the performance of post-construction walkthroughs and the submission of detailed installation compliance reports and walkthrough documentation. This project is located in Aliso Viejo, California, with a response deadline set for December 2, 2026.

City of Aliso Viejo

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Traffic Signal Infrastructure Design and PS&E PreparationThis subcontract opportunity involves providing professional engineering design services for regional signal synchronization projects within the City of Aliso Viejo, California. The selected contractor will support prime contractors by preparing comprehensive Plans, Specifications, and Estimates for traffic signal equipment and infrastructure improvements, while also developing technical responses and bid advertisements. A valid California Professional Engineer license is required to perform this work. The project culminates in the delivery of a complete PS&E package, with a response deadline set for December 2, 2026.

City of Aliso Viejo

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Traffic Data Collection and Field Study ServicesThis subcontract for Traffic Data Collection and Field Study Services supports prime contractors on regional signal synchronization projects for the City of Aliso Viejo. The scope of work involves comprehensive traffic analysis, including seven-day 24-hour machine counts, intersection turning movement counts, and floating car studies utilizing GPS and synchronized video analysis. All operations must be conducted within Caltrans right-of-way in strict accordance with 2026 CTFP Guidelines, with final deliverables consisting of field review memos and summarized count data provided in Excel format. The project is located in Aliso Viejo, California, under NAICS code 541330. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for December 2, 2026.

City of Aliso Viejo

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Oso Parkway/Pacific Park Drive/Glenwood Drive Regional Traffic Signal Synchronization Project

Solicitation # 20261026016

The City of Aliso Viejo is soliciting proposals for a professional licensed consultant to provide regional traffic signal synchronization services for the Oso Parkway, Pacific Park Drive, and Glenwood Drive corridor. The project involves coordinating traffic signals across multiple jurisdictions, including the Cities of Aliso Viejo, Laguna Hills, Mission Viejo, Laguna Niguel, the County of Orange, and Caltrans, extending from Moulton Parkway to the SR-241 Northbound On-Ramp. The projected period of performance is from April 1, 2027, to September 30, 2030. The selected consultant will be responsible for providing all necessary labor, materials, and equipment to implement optimized signal timing in accordance with the Regional Traffic Signal Synchronization Master Plan and the City's Local Signal Synchronization Plan. Proposals are due by December 2, 2026, and must be submitted as one hard copy and one electronic PDF on a USB drive, with the cost proposal in a separate sealed envelope. Award decisions will be based on a weighted evaluation of the consultant's ability and skills, character and reputation, cost reasonableness, ability to meet time requirements, financial resources, and previous experience with the vendor. The contract is governed by the laws of the State of California with venue in Orange County. Key requirements include compliance with California prevailing wage laws, adherence to the City's Minority Business Enterprise program, and the submission of annual political contribution disclosures.

City of Aliso Viejo

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Landscape Architecture and Public Space DesignerThis subcontract opportunity is for a Landscape Architecture and Public Space Designer to provide planning and conceptual design services for public parks on Atlanta Regional Commission projects. The selected professional will be responsible for advancing central gathering place planning to 30 percent completion, with a specific focus on integrating stormwater management and tree canopy considerations. Additionally, the scope includes the development of comprehensive placemaking strategies encompassing lighting, landscaping, wayfinding, and public art. To be eligible for this role, the contractor must hold a Professional Landscape Architect license. The primary deliverables for the engagement are a 30 percent Park Design Plan and a formal placemaking strategy document. This project is issued by the Buckhead Community Improvement District in Georgia, with a response deadline of November 13, 2026.

Buckhead Community Improvement District

POSTED

about 10 hours ago

DEADLINE

Multimodal Transportation & Mobility SpecialistThis subcontract for a Multimodal Transportation and Mobility Specialist involves analyzing and designing transportation improvements for prime contractors on Atlanta Regional Commission projects. The scope of work includes assessing roadways, transit stops, trails, and bicycle or pedestrian infrastructure to develop a prioritized list of local, state, and federal projects. Using GIS and Complete Streets design standards, the specialist will create a walkable streetscape focus area and grid prototype developed to 30 percent completion. The project is issued by the Buckhead Community Improvement District in Georgia under NAICS code 541330. The primary deliverables consist of a comprehensive transportation framework and the 30 percent design prototype. Interested parties should note the response deadline of November 13, 2026.

Buckhead Community Improvement District

POSTED

about 10 hours ago

DEADLINE

Buckhead CID Livable Centers Initiative Master Plan

Solicitation # 2026-10

The Buckhead Community Improvement District is soliciting proposals for the Buckhead Livable Centers Initiative Master Plan, a project aimed at updating the 2017 LCI plan to improve accessibility, walkability, and transit use. The scope of work focuses on the Buckhead and Lenox MARTA station areas and their connected mixed-use districts. Key deliverables include an existing conditions assessment report, a regulatory code study and audit, and the advancement of both a central gathering place/park plan and a walkable streetscape prototype to 30 percent completion. The total budget for this project is 300,000 dollars, with payments made via monthly invoices and progress reports. The project is funded through the Atlanta Regional Commission’s Livable Centers Initiative program and must adhere to federal regulations 49 CFR Part 18 and 49 CFR Part 26 regarding competitive procurement and Disadvantaged Business Enterprise participation. Additionally, the contractor must comply with the Georgia Security and Immigration Compliance Act and the Clean Air Act Amendments of 1990. The performance period begins with a notice to proceed on December 21, 2026, with a project kickoff in January 2027 and a final completion deadline of November 19, 2027. Selection will be based on the consultant's qualifications, prior experience, proposed approach, and understanding of the local Buckhead context.

Buckhead Community Improvement District

POSTED

about 10 hours ago

DEADLINE

Wastewater System Engineering ConsultantThe Wastewater System Engineering Consultant subcontract involves providing technical analysis and preliminary design services for prime contractors working on sewerage system projects for the City of Alamo. The selected consultant will be responsible for analyzing existing system capacity and conditions, developing design alternatives, and calculating flow rates in strict accordance with state environmental standards and Georgia Department of Community Affairs guidelines. Key technical requirements include the use of GIS mapping tools and hydraulic modeling software to produce design calculations, technical data, and draft sections of the Preliminary Engineering Report. Qualified candidates must hold a valid Georgia Professional Engineer license to perform this work. This opportunity was posted on October 28, 2026, with a response deadline of November 30, 2026. The project falls under NAICS code 541330 and is focused on ensuring the city's wastewater infrastructure meets all necessary regulatory and performance benchmarks.

POSTED

about 11 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

Railcar Fabrication & AssemblyThis subcontract for Railcar Fabrication and Assembly supports NSWC Crane strategic weapons transport projects under the Department of Defense. The scope of work involves the manufacture of physical flatcar structures for prime contractors, specifically focusing on the fabrication of railcar frames and decks. Utilizing industrial machining and heavy-duty welding, the contractor must ensure deliverables meet a maximum weight of 99,200 lbs and a gross rail load of 286,000 lbs. The final objective is the delivery of fully assembled and commissioned flat railcars that are approved for operation on U.S. rail networks. This opportunity falls under NAICS code 336510, with a response deadline set for November 25, 2026.

Railroad Rolling Stock Manufacturing

POSTED

DEADLINE

Hydraulic Cushioning Systems Supply & IntegrationThis subcontract involves the supply and integration of specialized hydraulic end cushioning systems for prime contractors working on NSWC Crane railcar projects. The selected provider is responsible for manufacturing or sourcing high-capacity hydraulic dampers and cushioning units that strictly adhere to the strike-down and performance criteria specified in Drawing WS20972A and the System Requirements Document. The scope of work requires the delivery of fully installed and tested hydraulic cushioning systems for each individual railcar unit. This Department of Defense effort falls under NAICS code 333999 and requires responses by November 25, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Railcar Structural Engineering & DesignThis subcontract for Railcar Structural Engineering and Design supports NSWC Crane strategic weapons transport projects through the provision of detailed engineering design and structural analysis for flat railcars. The scope of work requires the development of designs that strictly adhere to AAR-M1001 Section C, Part II, Drawing 5681514, and Drawing WS20972, with a specific technical requirement to calculate G-load and strike-down performance of 355 kips. The selected contractor will be responsible for delivering comprehensive approved design packages, detailed engineering drawings, and a final Bill of Materials. This effort falls under NAICS code 541330 and is managed under the Department of Defense for the NSWC Crane agency.

Engineering Services

POSTED

DEADLINE

Rail Logistics & Specialized TransportThis subcontract for Rail Logistics and Specialized Transport involves the transport and delivery of commissioned railcars for prime contractors supporting NSWC Crane projects. The scope of work requires the management of heavy-haul rail transport for railcars from the point of origin to specific government destinations, including Strategic Weapons Facility Atlantic, Strategic Weapons Facility Pacific, or the Eastern Range. The opportunity is issued by the Department of Defense under NAICS code 488111. Interested parties must adhere to the timeline associated with the October 26, 2026, posting date, with a response deadline set for November 25, 2026.

Air Traffic Control

POSTED

DEADLINE

Specialized Steel & Material SupplyThis subcontract for Specialized Steel and Material Supply supports NSWC Crane railcar projects by providing high-strength steel and raw materials to prime contractors. The scope of work involves the delivery of certified high-yield structural steel and AAR-certified alloys to a fabrication facility, ensuring all materials meet the specific weight and structural strength requirements for a Gross Rail Load of 286,000 lbs in accordance with AAR-M1001 standards. Managed under the Department of Defense, this opportunity falls under NAICS code 423510. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Specialized Freight and Delivery ServicesThis subcontract for Specialized Freight and Delivery Services involves the secure transport and delivery of 82 high-value precision shims for prime contractors supporting the Naval Surface Warfare Center Crane. The contractor is responsible for utilizing secure transport vehicles to prevent warping or damage, ensuring all units are delivered to the NSWC Crane Supply Operations Building 41 in Crane, Indiana. The operation must adhere to strict regulatory standards, including MIL-STD-129 for shipment labeling and FOB Destination terms as defined by FAR 52.247-34. Classified under NAICS code 484220, this Department of Defense project requires precise execution to maintain the integrity of the precision components during transit.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Precision Metal Shim Supply (P/N: BRFLX0800X4800X.125-2)This subcontract involves the manufacture and supply of 82 precision-engineered shims, specifically part number BRFLX0800X4800X.125-2, for prime contractors supporting the Naval Surface Warfare Center Crane. The contractor is required to utilize specialized tooling to ensure all units meet exact dimensions and tolerances as specified. The agreement mandates strict adherence to military standards, specifically MIL-STD-130 for item marking and MIL-STD-129 for shipment labeling. All deliverables are to be provided FOB Destination to the performance site in Crane, Indiana, under NAICS code 332710.

POSTED

DEADLINE

Conductive Primer and Aerospace Coating SupplyThis subcontract involves the supply of aerospace-grade conductive primers, base coats, and top coats to support prime contractors on NAVAIR/NSWC Crane projects. The materials must be specifically formulated to meet the technical specifications for LRIP 3 radome shells and are to be delivered to the GDMS Marion facility. Managed under the Department of Defense for NSWC Crane, the contract falls under NAICS code 325510. The scope of work focuses on the delivery of required quantities of specialized primer and paint materials to ensure compliance with aerospace standards for the designated performance location in Crane.

Paint and Coating Manufacturing

POSTED

DEADLINE

Radome Painting Process TrainingThis subcontract for the Department of Defense at NSWC Crane involves providing specialized technical training for prime contractors on LRIP 3 radome shell painting processes. The scope of work includes instructing personnel on surface preparation, the application of conductive primers, base coats, and top coats, as well as comprehensive inspection protocols. Training is conducted using industrial painting equipment and a scrap shell to ensure practical proficiency. The project requires a completed training course spanning four to five days, culminating in a final inspection of the training shell. To be eligible, the provider must maintain CMMC compliance and strictly adhere to all OEM standards. The performance of these services will take place in Crane, Indiana.

Other Technical and Trade Schools

POSTED

DEADLINE

MIL-STD Compliant Shipping and DeliveryThis subcontract involves the transport and delivery of uniquely identified military hardware for prime contractors supporting Naval Surface Warfare Center Crane projects. The service provider is responsible for labeling all shipments and storage containers in strict accordance with MIL-STD-129 and must utilize automatic identification technology devices to verify that all marks are machine-readable. The scope of work requires the delivery of four units to DoDAC N00164, with the final destination being the Supply Operations Bldg 41 at NSWC Crane. The contract is executed as FOB Destination and is categorized under NAICS code 484220 for specialized freight trucking.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Jacob Clutch Backstop Supply (P/N 6154770 / 6154770-002)This subcontract involves the supply of four specialized Jacob Clutch Backstops for prime contractors supporting Naval Surface Warfare Center Crane projects. The selected provider is responsible for manufacturing or distributing components according to Drawing 6154770 to ensure strict adherence to form, fit, and function requirements for specific davit designs. Additionally, all items must feature two-dimensional data matrix symbology marking in compliance with MIL-STD-130. To be eligible for this contract, the provider must maintain CMMC Level 2 certification and hold a valid Joint Certification Program registration. The work is categorized under NAICS code 336413 and will be performed in Crane, Indiana. The response deadline for this opportunity is November 2, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

N0016426RGW20-PROCUREMENT OF DESIGN AND PRODUCTION OF FLAT RAILCARS-PSC 2220- NAICS 336510

Solicitation # N0016426RGW20

Solicitation N0016426RGW20, issued by the NSWC Crane Warfare Center, is an IDIQ contract for the design, testing, and production of NSWC AIM Flatcars. The project has a contract maximum quantity of nine railcars, which must be fully commissioned and approved for rail use by the Association of American Railroads (AAR) in accordance with AAR-M1001 Section C, Part II. Key technical specifications include a lightweight car requirement of 116,000 pounds, truck axle loads not exceeding 60,000 pounds per axle, and adherence to WS20972 and MIL-SPC-810 for load securement. The period of performance is structured over five years from the date of award, with delivery costs to be evaluated across three Strategic Weapons Facility locations. The procurement process has undergone seven amendments, resulting in several extensions of the proposal deadline, with the final closing date set for November 25, 2026, at 2:00 PM EST. Significant modifications include updates to the Statement of Work, a reduction in the number of Contract Data Requirement Lists (CDRLs), and revisions to the System Requirements Document to adjust shipping weights and strikedown loads. The government will evaluate proposals based on delivery pricing and past performance on related railcar design and manufacture contracts, including commercial and non-federal experience. Government Furnished Property, including Active Inert Missiles and shipping fixtures, is designated for support with delivery dates targeted for September 20, 2027.

Railroad Rolling Stock Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

As-Built Documentation and Record Drawings

US Embassy Seoul

POSTED

CLOSED

Technical Data and Engineering Documentation Development

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

Quality Assurance and Inspection Services

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

about 2 months ago

Technical Support & Form-Fit-Function Certification

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

Healthcare Facilities Code Compliance (NFPA 99 – Medical Gas, Electrical Systems)

Network Contract Office 23 (36C263)

POSTED

CLOSED

Fire Life Safety Code Assessment (NFPA 101 & Joint Commission Compliance)

Network Contract Office 23 (36C263)

POSTED

CLOSED

Secure Cyber Enclave Architecture Design

Air Force Testing Center

POSTED

CLOSED

Engineering Data Acquisition and Compliance Support

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

Giant Voice Emergency Warning System Preventative Maintenance & Inspection

FA3099 47 Conf Cc

POSTED

DEADLINE

Technical Documentation and Compliance Support

Department Of Commerce Noaa

POSTED

CLOSED

Engineering Design & Certification Services

Sflc Procurement Branch 3(00040)

POSTED

CLOSED

Certification Testing and Technical Documentation

Transportation Security Administration

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS