Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Environmental Compliance and Monitoring

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
SLED
Environmental Compliance MonitoringThe contract requires environmental compliance monitoring to ensure that vegetation trimming activities adhere to regulations set by the Texas Parks and Wildlife Department and the Texas Commission on Environmental Quality. This includes protecting sensitive species, observing nesting seasons to avoid disturbances during critical breeding periods, and implementing erosion control measures near drainage areas to prevent environmental degradation. The work demands specialized knowledge of state environmental laws and field practices that minimize ecological impact while supporting infrastructure maintenance activities. This subcontract is issued by the Texas Department of Transportation under NAICS code 541620 for environmental consulting services and is open for responses until August 20, 2026. Performance is expected to occur across Texas, with no specific city or zip code designated, indicating the scope may span multiple regions where transportation-related trimming occurs. Bidders must demonstrate capability to monitor and enforce compliance with state environmental standards, respond to dynamic seasonal conditions, and document adherence to regulatory requirements. The solicitation remains publicly accessible through the Texas SmartBuy portal, and offers should reflect expertise in ecological oversight within transportation infrastructure contexts.
Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

in 23 days
NAICS: 541620
New
Federal
NRCS-Utah Cultural Resources Inventory Services, Iron CountyNRCS Utah is seeking qualified Cultural Resource Management firms to conduct an intensive pedestrian survey across approximately 775 acres of private land in Iron County, Utah, as part of a conservation initiative funded under the USDA Farm Bill. The project supports landowners Jared Spender Bayles and Randall Adams Land & Livestock in implementing rangeland enhancement practices such as mechanical brush removal, range planting, and forest stand improvement to reduce soil erosion, improve wildlife habitat, and boost forage production. Because federal funds are involved, the undertaking falls under Section 106 of the National Historic Preservation Act, requiring compliance with 36 CFR 800 to identify and assess potential impacts on historic properties. The contractor is responsible for identifying all cultural resources within the area of potential effects, defined by the specific conservation practice boundaries, to ensure no adverse effects on significant historic sites before implementation. The solicitation is a total small business set-aside under NAICS code 541620, with proposals due by August 10, 2026. All inquiries must be submitted in writing to Amy J Smith, Contract Specialist, no later than July 31, 2026. The project is managed by the U.S. Department of Agriculture through the FPAC Business Center, with performance located entirely in Utah.
Fpac Bus Cntr-Acq Division

POSTED

about 15 hours ago

DEADLINE

in 13 days
NAICS: 541620
New
Federal
Coastal GeoTools conference supportThe U.S. Department of Commerce, through the National Oceanic and Atmospheric Administration’s Office for Coastal Management, intends to award a sole-source contract to the Association of State Floodplain Managers to convene the Coastal Geo Tools 2027 conference focused on geospatial technology applications for coastal management. The procurement falls under the NAICS code 541620 for Environmental Consulting Services, with a business size standard of $19 million, and is justified on the grounds that ASFPM has hosted this specific conference annually since 2015 and possesses unique, irreplaceable expertise in engaging NOAA’s target audience of coastal resource managers. The agency asserts that no other entity can effectively replicate ASFPM’s established network, logistics, and proven track record of successful event execution and outreach. Interested parties may submit a Capability Statement to demonstrate their ability to meet the requirements, but only if they believe they can fulfill the needs currently assigned to ASFPM. Submissions must be received via email to Rebecca Johnson at NOAA no later than 3:00 PM EDT on August 7, 2026, and must include sufficient detail for evaluation. All responses must reference the announcement number and project title in the subject line, and oral communications are not permitted. Only registered entities in the System for Award Management with a valid Unique Entity ID are eligible for award, and late submissions will not be considered. The notice remains open for submissions from July 28 to August 7, 2026, with no assurance of competitive bidding unless compelling evidence is provided to override the sole-source justification.
National Oceanic And Atmospheric Administration

POSTED

about 15 hours ago

DEADLINE

in 10 days
NAICS: 541620
New
Federal
NRCS-Utah Cultural Resources Inventory Services, Juab CountyNRCS Utah is seeking qualified Cultural Resource Management firms to conduct an intensive pedestrian survey of approximately 436 acres of private land in Juab County, Utah, as part of a federally funded range management initiative. The project, supported by the U.S. Department of Agriculture Farm Bill, involves mechanical brush management and range planting aimed at enhancing forage production, reducing soil erosion, and improving wildlife habitat. As a federally assisted undertaking, the project is subject to Section 106 of the National Historic Preservation Act, requiring identification of any historic properties that may be adversely affected before implementation. The contractor is responsible for fully surveying the defined area of potential effects, using the approved project maps as the basis for the inventory, to ensure compliance with federal preservation guidelines. NRCS Utah serves as the lead federal agency and will oversee all Section 106 compliance activities related to this work. Proposals must be submitted by August 10, 2026, with all inquiries directed in writing to Amy J. Smith, Contract Specialist, no later than July 31, 2026. This solicitation is a total small business set-aside under NAICS code 541620 and is administered by the Department of Agriculture through the FPAC Business Center Acquisition Division.
Fpac Bus Cntr-Acq Division

POSTED

about 15 hours ago

DEADLINE

in 13 days
NAICS: 541620
New
SLED
Second Supplemental Recirculated Environmental Impact Report (SSREIR) for Revisions to Title 19- Kern County Zoning Ordinance (2024) focused on oil and gasThe project centers on the permanent plugging and abandonment of well Star Fee I39-1 located in the Cymric Oil Field, undertaken as part of the Second Supplemental Recirculated Environmental Impact Report (SSREIR) for revisions to Title 19 of the Kern County Zoning Ordinance (2024) related to oil and gas operations. This regulatory action aims to update zoning provisions governing oil and gas activities in the region, with the well abandonment serving as a specific compliance component under the environmental review. No new infrastructure installation is required, and all site-specific details including equipment and location are outlined on page two of the associated Site Plan. The procuring entity is Kern County, California, with the solicitation numbered PLO26-00898 and categorized under NAICS code 541620 for environmental consulting services. The posting date is listed as June 22, 2026, and the point of contact for primary administrative matters is Craig M Murphy, Director of Kern County, reachable via email and phone. Additional correspondence regarding permitting is handled by Griselda Carrillo, Permitting Technologist at Chevron. There is no specified contract value, delivery schedule, period of performance, or pricing information available, and the documentation does not contain traditional contract clauses, evaluation factors, or formal attachment lists typically found in procurement solicitation formats. Instead, the core deliverable is the environmental compliance outcome tied to the SSREIR, with no provision for recurring term, renewal, or financial clauses. The project’s legal and operational context is governed by California Environmental Quality Act (CEQA) guidelines through Notice of Exemption filings, and the place of performance is confirmed to be within the state of California.
Kern County

POSTED

about 20 hours ago

DEADLINE

N/A

AI Contract Overview

Show more

This contract focuses on providing stormwater management, erosion control inspections, and regulatory compliance reporting services. Intended as a subcontract opportunity under the title "Environmental Compliance and Monitoring," it supports environmental regulatory adherence within specified projects. The work will be performed primarily in British Columbia and Nova Scotia, aligning with the Department of National Defence's goals to ensure proper environmental stewardship and monitoring within these regions. The contract falls under NAICS code 541620, which pertains to environmental consulting services, indicating a need for specialized technical expertise in assessing and managing environmental impacts. The solicitation was posted on June 12, 2026, with a submission deadline set for June 29, 2026, highlighting a concise response timeframe. This opportunity is managed by the Government of Canada and is publicly accessible for review and bidding through the Canada Buys portal.

General Info

Subcontract for stormwater management, erosion control inspections, and compliance reporting in BC and Nova Scotia.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Stormwater management, erosion control inspections, and regulatory compliance reporting.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 611430
New
International
Learning Services in Simulated EnvironmentThe Department of National Defence is seeking a contractor to provide Small Arms Trainer (SAT) and Indirect Fire Trainer (IFT) operator services across multiple military sites in Canada, with the intent to award a single two-year contract under the solicitation number W3915-260016/A. The work encompasses the management, operation, and maintenance of SAT and IFT systems, including associated training aids, at core locations in Gagetown, NB; Valcartier, QC; Bagotville, QC; Petawawa, ON; Trenton, ON; and Borden, ON, with bilingual English-French requirements at certain sites. Contractors must supply personnel qualified in SAT or IFT training, or with a Canadian Armed Forces Primary Leadership Qualification (PLQ) or equivalent, and meet mandatory technical criteria to be considered responsive. The contract requires adherence to specific standards outlined in the Qualification Standard and Training Plan for SAT Operators, and all work must comply with applicable safety, environmental, and operational regulations. All personnel granted access to government sites must hold an active SECRET-level personnel security clearance issued by the Contract Security Program, and the contractor must maintain a valid SECRET-level facility security clearance throughout the contract term. Additionally, the contractor must be registered in the Controlled Goods Program and strictly prohibited from removing any classified or protected information from designated locations. The solicitation uses a pricing model based on annual minimum hour requirements per site, with bidders required to insert hourly rates in Canadian dollars for each location, and the total evaluated price is based on a minimum of 5,919 hours across all core locations. Offers must be structured into three sections: Technical, Financial, and Offer Submission Forms, submitted electronically to procurementcadtc@forces.gc.ca by the deadline of July 17, 2026, at 2:00 PM EDT. Evaluation is based on a pass/fail system for mandatory technical criteria and a minimum point threshold, with the award determined by the lowest adjusted price per point. A Canadian Value Factor of 25% will be applied to assess offers, and bidders must attest to Canadian content and supplier eligibility through formal declarations. Invoices must be submitted only after work is completed and include detailed breakdowns of labor, expenses, taxes, and supporting documentation such as time sheets and receipts, with payment processed via direct deposit within 30 days of receipt of a conforming invoice. The contractor is responsible for all travel authorizations, which must be linked to formal Task Authorizations,
Professional and Management Development Training

POSTED

about 22 hours ago

DEADLINE

in 3 days
View Details
New
International
WRISTWATCH, MK3I CARBON GRAY DLC TITANIUMThe Department of National Defence is soliciting offers for 150 wristwatches, specifically the MK3I Carbon Gray DLC Titanium model, to support diving and miscellaneous equipment requirements for Halifax-class vessels at CFB Halifax. The solicitation, identified as W8482-275456/A, has a response deadline of July 29, 2026, and is open to all eligible suppliers regardless of size or socioeconomic status, though offerors must comply with employment equity restrictions under the Federal Contractors Program. Bidders are required to submit completed annexes including the Offeror Submission Details in both Excel and PDF formats, the Offeror Submission Form, and the Offeror Declaration Form; any equivalent or substitute product must include the brand name, model, part number, and NCAGE code. Delivery is specified under Incoterms 2020 DDP to either CFB Halifax or CFB Esquimalt, with the supplier responsible for all transportation, duties, and taxes. The contract requires strict adherence to Canadian packaging and marking standards—D-LM-008-001/SF-001 and D-LM-008-002/SF-001—for Canadian-based suppliers, while EU and U.S. contractors must follow NATO TL8100-0100 and MIL-STD-2073 respectively, including palletization, labeling, and barcode requirements using UCC/EAN-128 with HRI. Each watch must be permanently marked with the manufacturer’s name and part number, and packaging must include cure dates, expiration dates, and serial numbers for shelf-life items, with at least 75% of the authorized shelf life remaining upon delivery. Quality assurance must conform to ISO 9001:2015, and all goods are subject to inspection and acceptance by the Government at origin or destination, with final acceptance occurring upon delivery. Payment will be made under a firm fixed price arrangement through the Halifax Payment Office using invoice code W010B, with electronic payment processed via direct deposit. Contractors must comply with security protocols as outlined in the PWGSC Contract Security Manual, particularly if handling classified information, and must secure prior approval before subcontracting. Additional obligations include compliance with international sanctions, provision of integrity declarations, and retention of all accounting records for seven years post-final payment, accessible for audit at any time. The contract also mandates adherence to Canadian Controlled Goods Program requirements if applicable and

POSTED

about 22 hours ago

DEADLINE

in about 16 hours
View Details
NAICS: 337127
New
International
RCACS Workplace FurnitureThe Department of National Defence is seeking office furniture for delivery and installation at CFB Gagetown, RCACS Door 31, Building J7, Cumberland Avenue, Oromocto, NB, with a mandatory completion date of September 30, 2026. This solicitation, issued under Supply Arrangement E60PQ-140003/D, targets Product Category 2 (Work Surface Products) and Product Category 3 (Filing and Storage Products), and is open only to suppliers within the General Stream of the arrangement. The procurement follows a Lowest Price Technically Acceptable approach, requiring offers to meet all mandatory technical specifications outlined in Annexes A and C, along with the Cat 2 and Cat 3 Product Builders, panel matrices, and supporting drawings. Submissions must be delivered electronically to CTCFmnContracts@forces.gc.ca by August 7, 2026, and must be structured into two distinct volumes: a Financial Offer and an Offer Submission Form containing the Offeror Declaration Form. Contractors must provide their Procurement Business Number, legal name, and business address, and affirm compliance with federal employment equity requirements, anti-bribery laws, and the government’s Code of Conduct. Failure to certify truthfully may result in offer rejection, contract termination, or future contract ineligibility. All goods must be delivered to the specified location in Oromocto, NB, with packaging required to be reusable, returnable, or recyclable under Canada’s Green Procurement Policy and Ocean Plastics Charter, though no military packaging standards like MIL-STD are referenced. The government retains right of inspection at the contractor’s plant or delivery point, with acceptance governed by contractual specifications. Payment will be at a fixed price, invoiced to the Receiver General for Canada, and contractors must retain records for six years. Security compliance is mandatory, including adherence to site access protocols, submission of personnel security status upon request, and maintenance of adequate insurance with Canada named as an additional insured. A Contracting Authority is identified as Aaron Pound, while the Contracting Officer Technical Representative field remains unassigned. No contract value is disclosed as all pricing fields in the solicitation remain blank or placeholder.
Institutional Furniture Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
New
International
FILTERS FOR TANK AIRCRAFT REFUELLINGThe Department of National Defence is seeking suppliers to establish a National Individual Standing Offer for a range of fuel and fluid filter elements used in tank aircraft refuelling operations, with deliveries required at 25CFSD Montreal and 7CFSD Edmonton. The solicitation, issued under File Number W8486-260492/C, supersedes a prior version that was cancelled due to revised technical requirements, and suppliers must adhere strictly to the updated Statement of Requirements and Annexes. Sixteen distinct filter part numbers are specified, all with defined GSIN, NSN, and NSCM/CAGE codes, and no equivalent or alternate part numbers will be accepted. Each item is listed with a unit of issue as “Each,” and quantities will be determined per individual Call-Up based on the Annex Requirement and Pricing Schedule. Offers must be submitted in Canadian dollars, excluding applicable taxes but including delivery, customs duties, and excise taxes. The Crown retains the right to negotiate with suppliers, and all submissions must be sent electronically via email to the designated address, with no other forms of submission permitted. The deadline for bids is September 7, 2026, and all documents may be submitted in either official language of Canada. The contracting authority is Christiane Joanisse, and the procurement target is exclusively for Canadian suppliers meeting the precise technical specifications outlined.

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 314994
New
International
POLYESTER FIBROUS CORDThe Department of National Defence is procuring 120,000 feet of polyester fibrous cord under solicitation W8485-279524, with delivery required by February 18, 2027, to the 7 Canadian Forces Supply Depot in Edmonton, Alberta. The item, identified by UNSPSC 31152100, NSN 4020-01-593-3517, and part number DCCB-1800-YG, must be supplied in 80 spools of 1,500 feet each, with offering contractors required to clearly state the part number and NSCM/CAGE code for any equivalent or substitute product and provide a certificate of conformance from the original equipment manufacturer. The solicitation operates under a Lowest Price Technically Acceptable (LPTA) evaluation methodology, where all offers must satisfy mandatory technical criteria—including full compliance with specification details, traceability of materials, material condition, and acceptance of all contract terms—before price becomes the determining factor. The contract is fixed-price and non-segmented, with no options, renewals, or additional quantities permitted. Packaging must adhere to Canadian government green procurement policies, requiring reusable, recyclable, or returnable materials, with ISPM 15 compliance for any wood packaging; palletized shipments exceeding 0.566 cubic meters or 15.88 kilograms must use standard pallets with strict dimensional controls and clear labeling. Goods must be delivered FOB Destination, delivered duty paid, with the contractor responsible for all transportation costs, duties, and taxes. Inspection may occur at the supplier’s facility, but formal acceptance takes place at the delivery location, and the contractor remains liable for any non-conforming items even after acceptance. The contractor must maintain ISO 9001:2015 compliant quality systems, provide audit-ready documentation, and comply with ethical standards prohibiting bribes, conflicts of interest, and forced labor. No security clearance is required, and all submissions must be made via CPC Connect, mail, courier, or fax to the designated address by the August 11, 2026 deadline, with proposals required in both technical and financial volumes, along with completed declaration and submission forms. Invoices must include the client reference number and applicable financial codes, though payment processing details and specific invoicing systems are not identified. The Crown reserves the right to negotiate terms with
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details