This Subcontract opportunity from Oregon was posted on September 30, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Environmental Compliance and Site Operations Support

Closed

State & Local

Submission Closed10/20/2025, 05:00:00 PM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910

New

Federal

F--Mold remediation, Merritt Island NWR

Solicitation # 140FF027Q0053

The U.S. Fish and Wildlife Service is requesting quotes for a firm fixed price contract to provide licensed mold remediation services at the Merritt Island National Wildlife Refuge Fire Office in Titusville, Florida. This total small business set-aside procurement, conducted under NAICS code 562910, requires the selective removal of mold-contaminated materials, HVAC cleaning, and post-remediation verification in accordance with IICRC S520 standards. The scope specifically excludes reconstruction or permanent repairs. The anticipated period of performance extends from the date of award through September 30, 2027. Eligible offerors must be registered in the System for Award Management and submit payment requests via the Invoice Processing Platform. Technical requirements include the submission of a site-specific Health and Safety Plan, a detailed remediation work plan, and proof of applicable Florida licenses. Personnel must demonstrate at least five years of relevant experience and provide respirator medical-clearance and fit-test certifications. Award will be made based on the Lowest Priced Technically Acceptable (LPTA) basis, evaluating a two-part submission consisting of a price proposal and a technical volume covering the management approach, key personnel, and past performance.

Fws Contracting Activity

POSTED

DEADLINE

F108--620-26-206 Asbestos Abatement

Solicitation # 36C24227R0010

Solicitation 36C24227R0010 is a firm-fixed-price contract for traditional asbestos abatement services at the Montrose VA Medical Center in New York. This procurement is a 100% set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) with an estimated construction magnitude between $100,000 and $250,000. The scope of work involves the removal, cleanup, and disposal of asbestos-containing materials (ACM) within a 2,300-square-foot area, specifically targeting floor mastic, carpet, levelers, and 100 linear feet of radiator panel insulation and heat shields. The project must be completed within 365 calendar days from the notice to proceed and may require evening or weekend operations to minimize disruption to facility occupants. Contractors must adhere to strict safety and environmental protocols, including the use of double-bagged 6-mil poly sheeting, HEPA vacuuming, and compliance with OSHA, EPA, and DOT regulations. Performance is subject to rigorous inspection, including final visual and air clearances verified by an independent industrial hygienist. Award will be based on a comparative evaluation of technical capability, past performance, and price. Technical requirements include providing evidence of at least two similar projects completed within the last five years and possession of valid New York State asbestos-abatement licenses. Additionally, the contract mandates compliance with the Davis-Bacon Act, Buy American requirements, and specific insurance minimums, including $500,000 for general liability per occurrence.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Testing & Inspecting, Preventative Maintenance, Corrective Repair, Emergency Repair, and Service Calls Amendment 0003

Solicitation # 36C25727R0018

Solicitation 36C25727R0018 is a total set-aside for Verified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) to provide on-call and emergency mold remediation and water intrusion services for the Department of Veterans Affairs, Central Texas Veterans HCS. The scope of work includes emergency response, stabilization, site assessments, moisture mapping, and remediation across multiple Texas locations, including Dallas, Garland, Bonham, and Grand Prairie. The contract is structured as a single Firm-Fixed-Price, indefinite-quantity agreement with three one-year ordering periods running from December 1, 2026, through November 30, 2029, with a possible six-month extension. The government will award based on best value, evaluating technical approach, price, and past performance. Technical evaluation focuses heavily on emergency response strategies, quality control, and adherence to standards such as ANSI/IICRC S520-2024, EPA guidelines, and VHA Directive 7715. Strict response times are mandated based on area criticality, ranging from two hours for patient-critical areas to eight hours for administrative areas. Qualified contractors must provide personnel with IICRC, OSHA 30, and Texas TDLR certifications. Proposals are due by November 18, 2027, and must be submitted in two separate PDF volumes, including a redacted technical version for evaluation.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Environmental Pollution Response Service Tender Notice (UK4)

Solicitation # ocds-h6vhtk-066243

The Ministry of Defence, through the Operational Energy Authority, is soliciting an Environmental Pollution Response Service (EPRS) to manage spills of fuels, oils, and lubricants across all MOD locations in the UK and overseas bases. This service is intended for use when a unit's internal response capabilities are exceeded. The scope of work includes oil spillage monitoring, environmental decontamination, and surface water and groundwater pollution control. The estimated contract value is 4,166,666.67 GBP excluding VAT, with a total value of 5,000,000 GBP including VAT, covering a four-year performance period from 1 July 2027 to 30 June 2031. The contract will be awarded based on the Most Advantageous Tender (MAT) criteria. Evaluation is split between a technical envelope weighted at 60 percent and a commercial envelope weighted at 40 percent. The technical portion is further divided into scenario-based questions and social value, while both technical and commercial envelopes include mandatory pass/fail compliance sections. Interested parties, including small and medium-sized enterprises, must be registered on the Defence Sourcing Portal to participate. The deadline for tender submissions is 4 January 2027.

POSTED

DEADLINE

Asbestos Abatement / Specialized Remediation

Cherokee Nation Housing Authority

POSTED

DEADLINE

Emergency Remediation Services, DCA

Solicitation # RFQ-26-25141

The Metropolitan Washington Airports Authority is seeking a contractor to provide emergency remediation services at Ronald Reagan Washington National Airport in Virginia. Under solicitation RFQ-26-25141, the selected provider will be responsible for furnishing all necessary labor, materials, tools, supplies, transportation, and equipment to address urgent needs on an as-needed basis. The scope of work specifically covers remediation efforts related to fire, flood, mold, and biological hazards. This presolicitation notice indicates that the authority requires a comprehensive response capability to maintain safety and operational integrity at the airport during emergency events.

Metropolitan Washington Airports Authority

POSTED

DEADLINE

RFQ-171-270000000007-3 | 761/19006.SAR; NuWay Cleaners Site - Remedial Excavation

Solicitation # 761/19006.SAR

The Michigan Department of Technology, Management and Budget (DTMB) is soliciting bids for remedial excavation and abatement at the NuWay Cleaners site in Escanaba, Michigan. The scope of work involves the excavation and disposal of PCE contaminated soils to an average depth of 6 feet, the management of underground storage tanks (USTs), and the installation of MDOT Class II fill sand. Additionally, the contractor is responsible for site preparation, concrete removal and replacement, and the implementation of a traffic control plan. All work must be performed between 6:00 AM and 6:00 PM on business days, adhering to 29 CFR 1910.120 health and safety standards and applicable federal, state, and local regulations. Bids are due by November 18, 2026, at 2:00 p.m. ET via the SIGMA VSS portal. Submissions must include a 5% bid guarantee, and contracts exceeding $50,000 require both performance and payment bonds. The state will award the contract to the responsive and responsible best value bidder, evaluating a combination of price and qualitative factors such as technical approach, personnel quality, and past performance. Preferences are available for Michigan-based businesses and Qualified Disabled Veteran (QDV) owned businesses, the latter of which may receive a 10% pricing preference. Payments will be disbursed exclusively through Electronic Funds Transfer (EFT) within 30 calendar days of approved invoicing.

POSTED

DEADLINE

Hazardous Materials AbatementThis hazardous materials abatement subcontract, issued by the New Jersey Division of Property Management and Construction, involves the removal and disposal of asbestos-containing materials and the treatment of lead-based paint at South Woods State Prison. The scope of work requires the contractor to mist materials with amended water, remove non-friable asbestos in whole sections using double-layer polyethylene sheeting, and utilize chemical strippers or HEPA vacuum needle guns for lead removal. The contractor must ensure strict compliance with OSHA 29 CFR Part 1926.62 and perform TCLP testing to verify safety standards. Final deliverables include the provision of waste manifests and a certified clean site. The solicitation was posted on November 12, 2026, with a response deadline of November 24, 2026, falling under NAICS code 562910.

New Jersey Division of Property Management and Construction

POSTED

DEADLINE

Asbestos-Containing Sink Undercoating RemovalThis subcontract involves the removal and disposal of approximately 41 classroom sinks containing asbestos-containing undercoatings for prime contractors working on City of Cambridge facility projects. The scope of work requires the establishment of regulated mini-enclosures and the maintenance of strict engineering controls. All waste must be packaged in leak-tight containers and 6-mil poly sheeting to ensure safe handling and transport. To qualify, personnel must possess OSHA-approved safety training and proper licensure in accordance with the Fuss and O'Neill Asbestos Work Plan. The successful completion of the contract is contingent upon the removal of all 41 sinks as verified by third-party monitoring. This project is managed under the Capital Buildings Projects agency in Massachusetts.

Capital Buildings Projects

POSTED

DEADLINE

REBID: Sink Undercoating Abatement

Solicitation # COC-RWR-FY26-31100A

The City of Cambridge is soliciting bids for the removal of approximately 41 classroom sinks with asbestos-containing undercoatings at the former Kennedy-Longfellow School located at 158 Spring Street and Ahern Field. The scope of work requires the establishment of regulated mini-enclosures and the maintenance of engineering controls to perform abatement in accordance with the project Asbestos Work Plan and applicable federal and state regulations. Faucets must be removed as a complete unit with the sinks, and all work must be performed while the school remains unoccupied. The project must be completed within two months of the Notice to Proceed, with work commencing within seven days of said notice. Contractors must adhere to strict waste packaging and labeling standards, including the use of leak-tight locking containers lined with 6-mil poly sheeting and transport in sealed vans with airtight barriers. Compliance with OSHA-approved safety and health training and the Americans with Disabilities Act is mandatory. Evaluation factors include the submission of three customer references from the last five years and a firm price proposal. Final acceptance is contingent upon a no visible suspect dust or debris standard, verified by third-party monitoring and clearance air sampling using Phase Contrast Microscopy or Transmission Electron Microscopy. Required financial protections include performance and payment bonds, with a 50% payment bond required for contracts exceeding $25,000, and a wage bond covering one year of gross wages for all employees.

Capital Buildings Projects

POSTED

DEADLINE

Sink Undercoating Abatement ServicesThis subcontract for Sink Undercoating Abatement Services involves the removal and disposal of hazardous undercoating materials from sink basins for prime contractors working on City of Cambridge municipal projects. The scope of work requires the identification and containment of hazardous materials using HEPA vacuum systems and containment barriers, with all waste disposal conducted in strict accordance with Massachusetts environmental regulations. The final deliverables include a clean, abatement-certified sink area and all necessary waste disposal manifests. To be eligible for this contract, providers must hold a state-certified Asbestos/Lead Abatement License. The project is located in Cambridge, Massachusetts, and falls under NAICS code 562910. Interested parties must submit their responses by the deadline of December 3, 2026.

POSTED

DEADLINE

COC-RWR-FY27-31100A: REBID: Sink Undercoating Abatement

Solicitation # BD-27-1144-CAMBR-CAMBR-135164

The City of Cambridge is soliciting bids for a sink undercoating abatement project, identified as file number COC-RWR-FY27-31100A under solicitation number BD-27-1144-CAMBR-CAMBR-135164. This open market procurement is managed by the City of Cambridge in Massachusetts, with the work to be performed within the city. The solicitation was posted on November 12, 2026, and the deadline for bid submissions is December 3, 2026, at 2:00 PM. Interested parties must submit their quotes electronically through the City's e-Procurement Portal. The primary point of contact for this procurement is Natalie Sullivan, who serves as the contact person and the bill-to recipient located at 795 Massachusetts Ave, Room 303, Cambridge, MA 02139. While the scope is defined as sink undercoating abatement, specific unit pricing and total contract value have not been disclosed in the solicitation documents.

City of Cambridge

POSTED

1 day ago

DEADLINE

in 20 days

AI Contract Overview

The Environmental Compliance and Site Operations Support subcontract, issued by Marion County in Oregon, requires the provision of on-site support to maintain environmental standards during grinding operations. The primary scope of work focuses on implementing dust control measures, ensuring spill prevention, and managing general site cleanup to remain in compliance with regulatory requirements. Interested parties must submit their responses by the deadline of October 21, 2025. This opportunity is categorized under NAICS code 562910 and was officially posted on September 30, 2025.

General Info

Marion County subcontract for environmental compliance and site support due October 21, 2025.

Agency

Oregon → Marion County

NAICS

562910 - Remediation Services

Place of Performance

OR, USA

Set-Aside

NONE

Documents

This scope was carved out of PW1710-25.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Yard Debris Grinding Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 30

subcontract

Response DeadlineOct 20

Deadline has passed

Submission Closed

10/20/2025, 05:00:00 PM PDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOregon → Marion County

ContactsNo contacts available

OfficeN/A

Organization / AgencyOregon → Marion County

Office AddressN/A

ContactsNo contact information available

Full Description

Provide on-site support to ensure grinding operations comply with environmental standards, including dust control, spill prevention, and site cleanup.