This Government Contract opportunity from Government of Canada was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Environmental Control Unit (ECU) Manufacturing and Assembly

Closed

International

Submission Closed07/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E8-27-T-0298

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

41--Remove and Replace Walkin Cooler and Freezer

Solicitation # 140GG027Q0009

The U.S. Geological Survey EESC-S.O. Conte Research Laboratory is soliciting quotes for the removal and replacement of an existing walk-in cooler and freezer in Turners Falls, Massachusetts. The contractor is responsible for all labor, materials, and supervision required to disconnect and dispose of the old units and install new, energy-efficient equipment that meets or exceeds current capacity. The new cooler must maintain temperatures between 35 and 41 degrees Fahrenheit, while the freezer must maintain 0 degrees Fahrenheit or below. Key deliverables include the fully operational units, staff training, and the provision of operation manuals and warranties. This is a small business set-aside under NAICS code 333415, with a requirement for offerors to be registered in the System for Award Management. The project must be delivered within 30 days of the purchase order, with a critical installation window of 10 working days due to the sensitivity of the freezer contents. Award will be based on the most advantageous offer considering price and technical capability. All work must comply with local building and health codes, OSHA safety requirements, and Wage Determination 2015-4079 Revision 35 for Franklin County, Massachusetts. Invoicing must be processed through the Invoice Processing Platform.

Usgs Contracting Activity

POSTED

DEADLINE

41--REFRIGERATOR-FREEZER,M

Solicitation # SPE3SE-27-T-0085

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

41--CRANKSHAFT,COMPRESS

Solicitation # SPE8E8-27-T-0296

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

NSWCCD York Chill Pump Replacement

Solicitation # N0016727Q1002

The Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting quotes for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1) for York Chiller No. 1 in Building 157. This equipment is critical for providing chilled-water cooling to the Building 13 Server Rooms. The project requires the removal of the damaged pump and the installation of a York Chill Pump, Model YLAA0080SJ46X, Serial SEMM-609950. Due to the proprietary nature of the equipment, the contractor must utilize certified Johnson Controls technicians or representatives. The installation must be completed on or before December 18, 2026, at the NSWCCD facility in Bethesda, Maryland. This is a brand-name restricted procurement under full and open competition and is not set aside for small businesses. The government intends to award a single firm-fixed-price purchase order based on the lowest price technically acceptable method, evaluating quotations on a pass/fail basis for technical requirements and considering past performance via the Supplier Performance Risk System. All quotes must be submitted on official company letterhead, including all-inclusive pricing and business size, and sent via email to the contract specialist and contracting officer by 09:00 AM EDT on November 06, 2026. The contract includes specific requirements for item unique identification per MIL-STD-130 and electronic invoicing through the Wide Area WorkFlow system.

POSTED

DEADLINE

4120--SPECIAL Duplex Strainer - MPLS

Solicitation # 36C26327Q0054_0001

Solicitation 36C26327Q0054 is a small business set-aside procurement issued by the Department of Veterans Affairs Network Contracting Office 23 for a duplex strainer to be delivered to the Minneapolis VA Medical Clinic. The requirement is designated as Brand Name or Equal, specifically targeting the Keckley Duplex Basket Strainer, including part numbers P/N2RFFD-FCS125P34-920 and FT-920-Gasket. Offerors providing the exact Keckley brand name items are not required to provide additional technical data, while those proposing equal products must confirm that all salient characteristics are met. The procurement falls under NAICS code 333415, with a size standard of 1,250 employees. Key technical and delivery constraints include a maximum component weight of 2,000 lbs to ensure compatibility with the VA loading dock and equipment. Delivery is required as FOB destination. The contract incorporates FAR 52.219-33 regarding the Nonmanufacturer Rule for vendors acting as resellers. This specific amendment serves to answer vendor questions and requires offerors to acknowledge receipt to remain eligible for consideration. Quotes must be submitted to Robert Bennett by October 30, 2026, at 3:00 PM UTC.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Supply of Refrigeration Condenser (NSN 4130-01-701-9202)This subcontract involves the procurement of one refrigeration condenser, part number RUT051-2, intended for prime contractors supporting Defense Logistics Agency supply contracts for the USS GERALD R FORD CVN 78. The unit must be manufactured or sourced in strict accordance with NSN 4130-01-701-9202 and the quality requirements specified in the DLA Master List RA001. The contractor is required to adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while ensuring compliance with DFARS 252.204-7012 cybersecurity standards. The final deliverable consists of one packaged and marked condenser delivered FOB Origin. This requirement falls under NAICS code 333415 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0292

Solicitation SPE8E8-27-T-0292 is a fixed-price requirement issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one refrigeration condenser, identified by NSN 4130-01-701-9202 and part number RUT051-2. The item is to be delivered to the USS GERALD R FORD CVN 78 at FPO AE 09523 with a delivery window of 20 days after receipt of order. Shipping is designated as FOB Origin, and the government will perform inspection and acceptance at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List (RA001), and the procurement incorporates several regulatory clauses, including the Buy American and Balance of Payments Program (DFARS 252.225-7001) and safeguarding requirements for covered defense information (DFARS 252.204-7012). This is not a small business set-aside, and all quotes must be submitted via the DLA Internet Bid Board System (DIBBS). Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

DEADLINE

COMPRESSOR UNIT, REFRIG

Solicitation # SPE8E8-27-T-0289

Solicitation SPE8E8-27-T-0289 is a request for quotations for one refrigeration compressor unit, identified by NSN 4130-01-633-7158 and part numbers KANB-007E-CAV or KANB-007E-CAV-800. The procurement is managed by DLA Troop Support Construction and Equipment and is not a small business set-aside, though it utilizes a HUBZone price evaluation preference. The required delivery date is October 21, 2026, with a delivery window of 20 days after order. The item is to be shipped FOB Destination to DLA Distribution Norfolk RMC Project in Norfolk, Virginia. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-1. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must certify they will not provide covered telecommunications equipment and must submit Safety Data Sheets for any hazardous materials prior to award to remain eligible.

NORFOLK RMC PROJ BUNKER HILL TOWAWAY BLDG X136 MR CUNNINGHAM

POSTED

DEADLINE

RECEIVER, LIQUID REFRIG

Solicitation # SPE8E8-27-T-0293

Solicitation SPE8E8-27-T-0293 is a request for quotations issued by the Defense Logistics Agency for the procurement of two liquid refrigerant receivers, identified by NSN 4130014895398 and part number 577-0462-00. The items are destined for the USS KANSAS CITY LCS 22, with a required delivery date of October 16, 2026. The contract is established as FOB Destination, with both inspection and acceptance occurring at the destination. The procurement is not a small business set-aside and falls under NAICS code 333415. Strict compliance is required for packaging and marking per MIL-STD-2073-1E and MIL-STD-129, as well as DLA packaging requirements RP001. Technical and quality standards are governed by the DLA Master List via RA001, and there is a strict prohibition against the intentional use of mercury or mercury-containing compounds in the hardware. Additionally, the government will not evaluate or award contracts for items produced using additive manufacturing. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The contract incorporates various DFARS and FAR clauses, including those regarding the safeguarding of covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment. Offerors must also certify their status regarding covered defense telecommunications equipment and services.

Defense Logistics Agency

POSTED

DEADLINE

CONDENSER, REFRIGERATIO

Solicitation # SPE7M1-27-T-1559

Solicitation SPE7M1-27-T-1559, issued by the DLA Weapons Support Maritime Supply Chain on October 26, 2026, is a request for quotations for two refrigeration condensers, identified by NSN 4130-01-649-6827 and Johnson Controls Navy Systems part number 026-46495-000. This procurement is not a small business set-aside and falls under NAICS code 333415. The required delivery date is June 27, 2027, with a delivery window of 233 days. Shipping is designated as FOB Origin under the First Destination Transportation program, with the final delivery, inspection, and acceptance point located at DLA Distribution San Diego, California. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Offerors must comply with the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the prohibition of covered telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System by November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Refrigeration Condenser (NSN 4130016496827)This subcontract involves the manufacture or procurement of a refrigeration condenser unit under NSN 4130016496827 for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The contractor must ensure the unit adheres to the DLA Master List of Technical and Quality Requirements RA001 and complies with the Hazard Communication Standard 29 CFR 1910.1200. The scope of work includes specific packaging and marking requirements in accordance with RP001, MIL-STD-2073-1E, and MIL-STD-129. The final deliverable consists of one packaged and marked refrigeration condenser to be delivered to DLA Distribution San Diego. This requirement falls under NAICS code 333415.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The contract calls for the full design, manufacturing, and assembly of a ruggedized Environmental Control Unit (ECU) tailored for military applications in extreme environments, with mandatory compliance to MIL-STD specifications to ensure reliability under harsh operational conditions. The unit must incorporate integrated components that meet stringent performance, durability, and environmental resilience criteria appropriate for deployment in demanding military scenarios. This is a subcontract opportunity under the NAICS code 333415, managed by the Government of Canada’s Department of National Defence, with performance required to be carried out in Petawawa, Ontario, excluding the National Capital Region. The solicitation was posted on May 29, 2026, with a deadline for responses set for July 8, 2026, at 7:00 PM Eastern Time. The contract is not subject to any specific set-aside designation, and no point of contact information is provided within the posted data. Interested parties must prepare proposals that comprehensively address technical specifications, quality assurance processes, and supply chain traceability, ensuring all deliverables align with Canadian military standards for ruggedized electronics. All manufacturing and assembly activities must be conducted to guarantee full operational readiness in extreme temperature, vibration, and moisture conditions typical of field-deployed military systems.

General Info

Design, manufacture, and assemble ruggedized MIL-STD ECU for Canadian military in Petawawa.

Agency

Government of Canada → Department of National Defence

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

Place of Performance

Canada, Ontario (except NCR), Petawawa, CAN

Set-Aside

NONE

Documents

This scope was carved out of W6399-26-LY77/A.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Environmental Control Unit

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 29

subcontract

Response DeadlineJul 8

Deadline has passed

Submission Closed

07/08/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Full design, manufacturing, and assembly of a ruggedized ECU for military use in extreme environments, including integrated components and compliance with MIL-STD standards.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Environmental Control Unit (ECU) Manufacturing and Assembly

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Government of Canada → Department of National Defence

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open