Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Environmental Laboratory Testing Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the provision of environmental laboratory testing services for the Department of Defense in the United Arab Emirates, focusing on the chemical and physical analysis of soil, water, and air samples to support military operations. All testing activities must adhere to the international standard ISO/IEC 17025 for technical competence and the accuracy of results, ensuring high-quality data integrity for critical DoD decision-making. Additionally, the contractor is required to implement stringent cybersecurity and data handling protocols in compliance with DFARS 252.204-7012 to safeguard Controlled Unclassified Information, including secure storage, transmission, and disposal of all sensitive environmental data. This subcontract, issued under the NAICS code 541380 for other scientific and technical consulting services, is managed by the Defense Logistics Agency and is tied to the contract SPE60324FA3Z3. Performance is expected to occur within the UAE, with no specified U.S. location for the work. The contract was posted on July 17, 2026, and while no set-aside classification or point of contact details are provided, the scope demands a high level of technical expertise, regulatory compliance, and operational discretion due to the nature of defense-related environmental monitoring. The contractor must ensure all laboratory procedures are fully documented, auditable, and aligned with both international accreditation requirements and U.S. defense information security mandates.

General Info

Environmental lab testing in UAE for DoD, compliant with ISO/IEC 17025 and DFARS 252.204-7012.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform laboratory analysis of environmental samples including soil, water, and air to support DoD operations in the UAE. Testing must comply with ISO/IEC 17025 and DFARS 252.204-7012 for CUI protection.

Similar Contracts

Same NAICS industry code

Fire Hydrant Inspection and Testing ServicesThe contract requires the performance of routine inspection, flow testing, and operational checks of fire hydrants to verify compliance with fire safety standards and ensure the reliability of the water supply system. All tasks must be executed according to established protocols to maintain peak functionality and readiness for emergency response. The work is scoped as a subcontract under the NAICS code 541380, indicating professional, scientific, and technical services related to environmental and engineering consulting. The solicitation was posted on July 23, 2026, and responses are due by August 20, 2026. The contract is administered by OC Community Resources in California, though specific location details for performance or contact are not provided. All work must align with applicable fire department regulations and industry best practices to uphold public safety.

OC Community Resources

POSTED

about 19 hours ago

DEADLINE

Laboratory Instrument Preventative Maintenance & Calibration ServicesThe contract outlines a comprehensive service agreement for on-site annual preventative maintenance, factory-level calibration, and performance verification of high-precision thermal analysis instruments, specifically including the LFA 467 HT model, all conducted in strict accordance with original equipment manufacturer protocols. These services are essential to ensure the continued accuracy, reliability, and compliance of laboratory instrumentation used in critical thermal analysis applications. The work is expected to be performed at the client’s location, with all procedures aligned to OEM specifications to maintain instrument integrity and operational standards. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 4, 2026. It falls under NAICS code 541380, which categorizes it within other scientific and technical consulting services. The contracting entity is the state of Utah, with Utah listed as both the agency name and organizational name, though no specific office address, place of performance details, or point of contact information is provided. Interested parties must submit proposals through the specified online portal by the stated deadline to be considered for award.

POSTED

about 19 hours ago

DEADLINE

Traffic Engineering and Safety AnalysisThe contract titled Traffic Engineering and Safety Analysis seeks qualified subcontractors to conduct comprehensive traffic impact studies, design traffic control plans, and perform signal warrant analyses in full compliance with the Manual on Uniform Traffic Control Devices and Caltrans standards. The work is intended to support transportation infrastructure planning and safety improvements across California, ensuring all engineering solutions meet state-mandated guidelines for efficiency and public safety. This subcontract is open for bid with a response deadline of August 24, 2026, and falls under the NAICS code 541380 for other engineering services, with no specific set-aside provisions outlined. The California Department of Transportation is the issuing agency, and all deliverables must align with the technical and regulatory expectations of the state’s transportation authority. Interested parties can access the full solicitation through the CalEprocure portal.

California Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Data Management and Laboratory Testing SupportThe contract seeks support for the collection, analysis, and certification of test data required for compliance and quality assurance purposes, with a strong emphasis on coordination with accredited laboratories to ensure data integrity and regulatory alignment. The scope includes end-to-end management of laboratory testing workflows, from initial sample handling through final certification and submission of verified results, ensuring all procedures meet recognized standards and are properly documented. Contractors are expected to manage timelines, maintain chain-of-custody protocols, and deliver certified outputs in a timely manner to meet project milestones. This subcontract is issued by Montgomery County, Pennsylvania, under NAICS code 541380, which corresponds to other scientific and technical consulting services. The solicitation was posted on July 23, 2026, with a deadline for responses set for September 1, 2026, at 3:00 PM. While specific performance locations and point of contact details are not provided, the work is expected to support governmental operations requiring precise and auditable laboratory data. Interested parties should ensure their capabilities align with accreditation requirements and that they can reliably interface with certified testing facilities to fulfill contractual obligations.

Montgomery County Pa

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Reliability Testing and Validation ServicesThe contract seeks independent testing services to evaluate the reliability, safety, and environmental performance of door systems under rigorous conditions. This includes comprehensive cycle testing to simulate real-world usage and validation of mean time between failures to ensure long-term durability and operational integrity. The work is focused on verifying that door systems meet required performance benchmarks across varying environmental stresses and repeated use scenarios. The opportunity is posted as a subcontract under NAICS code 541380, with a response deadline of September 9, 2026. It is administered by the State of Utah, with all performance activities expected to be conducted within the state. Bidders must comply with the technical requirements for testing protocols and deliver comprehensive validation data, though no specific set-aside provisions or point of contact details are provided. The solicitation is accessible through the Utah BonfireHub portal.

POSTED

about 24 hours ago

DEADLINE

in about 2 months

Radioactive Materials Screening and NotificationThe contract seeks a subcontractor to perform radiological screening of materials to identify any radioactive content exceeding established threshold levels, ensuring compliance with military standards for safety and traceability. The work requires precise detection methods and adherence to MIL-STD-129 for proper labeling, documentation, and reporting of affected items to prevent unintended exposure and maintain regulatory integrity across the supply chain. All screening activities must be conducted with calibrated equipment and documented procedures to verify accuracy and accountability. This subcontract is issued under the Department of Defense’s Strategic Acquisition Program Directorates and falls under NAICS code 541380, indicating it involves scientific and technical consulting services. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is accessible through the DIBBS system. Performance location and point of contact details are not specified, but the work is expected to support defense logistics and material handling operations, emphasizing strict regulatory compliance and the timely identification of potentially hazardous radioactive substances before they enter controlled environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Quality Assurance and Compliance DocumentationThe contract seeks a small business to provide technical documentation, quality assurance testing, and compliance verification services to ensure splash guards meet all technical specifications set by the Defense Logistics Agency. This includes preparing Safety Data Sheets and validating labeling to confirm adherence to regulatory and operational standards. The work is critical to ensuring product conformity and safety for military use, requiring precise execution throughout the documentation and testing phases. The solicitation is a total small business set-aside under FAR 19.5, meaning only small businesses are eligible to respond, and it falls under NAICS code 541380 for other professional, scientific, and technical services. The opportunity was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. While no specific location is listed for performance or the point of contact, the work is expected to be performed in support of defense logistics operations under the authority of the DLA.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The subcontract requires a technical assessment to determine whether the cable assembly includes any radioactive materials, specifically tritium or other isotopes, and mandates full regulatory notification to the Contracting Officer if such components are present. This includes providing detailed isotope information, hazard data, and any associated regulatory compliance documentation to ensure adherence to federal safety and handling protocols. The assessment must be completed and submitted prior to the response deadline of July 28, 2026, with all findings clearly documented and presented in a form acceptable to the Department of Defense. Performance of this requirement is tied to the location of MCBH Kaneohe Bay, Hawaii, and falls under the NAICS code 541380, indicating specialized technical services related to scientific and engineering consulting. The contracting entity is the ASC Commodities Division under the Department of Defense, and the subcontractor is expected to comply with all applicable nuclear regulatory standards without relying on external citations. Failure to identify or disclose radioactive components may result in contract breach, penalties, or safety violations, making accurate and thorough evaluation critical to fulfillment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) Coordination and ExecutionThe contract requires coordination and execution of Production Lot Testing (PLT) in support of government-led activities, with primary responsibilities including the submission of test samples, strict adherence to Technical Data Package (TDP) requirements, and comprehensive maintenance of process documentation to ensure readiness for Defense Contract Management Agency (DCMA) inspections. All activities must be conducted in full compliance with federal and defense standards, with a focus on quality control, traceability, and documentation integrity throughout the production lifecycle. This is a small business set-aside subcontract under NAICS code 541380, classified as a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026. The contracting activity is the ASC Commodities Division under the Department of Defense, and the work is expected to be performed at an unspecified location, though performance is tied to government testing and inspection protocols. No point of contact is listed, and all inquiries must be directed through the official DIBBS portal link provided.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract is for First Article Testing (FAT) services governed by DI-NDTI-80809B, requiring full execution and documentation of government-mandated testing procedures. This includes the preparation and submission of test specimens and the comprehensive reporting of compliance results to meet federal standards. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 541380 indicating engineering services. The task is administered by the ASC Commodities Division of the Department of Defense, with a response deadline set for August 3, 2026, and the solicitation posted on July 23, 2026. Performance location details and point of contact information are not specified, but the work is tied to government procurement systems accessible via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Materials Testing and Quality Verification ServicesThe contract seeks independent testing services for bent metallic tubes to verify material composition, pressure tolerance, and dimensional accuracy in accordance with Department of Defense Acceptable Quality Level standards. The work is scoped under NAICS code 541380 and is structured as a subcontract opportunity, with performance required at Dyess Air Force Base, Texas, and a strict response deadline of July 28, 2026. Testing protocols must align with rigorous military specifications to ensure compliance and reliability of components used in aviation supply chain applications. All submissions must meet the technical and procedural expectations defined by DoD quality verification protocols, and contractors are expected to deliver precise, documented results demonstrating adherence to accepted benchmarks.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Materials HandlingThis contract requires specialized services for testing, labeling, and documentation of components that contain radioactive materials, in strict compliance with the Defense Federal Acquisition Regulation Supplement and MIL-STD-129 where applicable. The work must ensure all handling procedures meet federal standards for safety, traceability, and regulatory adherence, with particular attention to accurate labeling and comprehensive recordkeeping to support operational and compliance requirements. The contract is structured as a subcontract under a HUBZone Set-Aside designation, reserved for businesses located in historically underutilized business zones to promote economic development and job creation in disadvantaged areas. The North American Industry Classification System code 541380 identifies the scope as other professional, scientific, and technical services, reflecting the technical and specialized nature of the work. The solicitation was posted by the Strategic Acquisition Program Directorate within the Department of Defense, with a response deadline of July 28, 2026. Performance location details are unspecified, but the services must align with DoD protocols for radioactive material management. All submissions must be completed through the DIBBS portal prior to the deadline, and contractors must demonstrate capability to handle sensitive radioactive components under stringent regulatory oversight.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires implementation and self-assessment for Cybersecurity Maturity Model Certification (CMMC) Level 2 to safeguard Controlled Unclassified Information (CUI) in alignment with NIST Special Publication 800-171 requirements. The work involves establishing and documenting cybersecurity controls necessary to meet CMMC Level 2 standards, ensuring compliance through internal evaluations and evidence collection. This subcontract is tied to the Department of Defense, specifically under the Defense Logistics Agency, and performance must occur at the FPO location with ZIP code 96673. The solicitation is categorized under NAICS code 541512, indicating it relates to computer systems design services. Responses are due by July 28, 2026, and the contract was posted on July 23, 2026, with no set-aside designation specified. All activities must align with federal cybersecurity frameworks to maintain the integrity and confidentiality of CUI handled under this agreement.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the identification, labeling, and proper documentation of hazardous materials associated with water heaters and their packaging, ensuring full compliance with OSHA standards and the provision of Safety Data Sheets. All materials must be accurately labeled with hazard warnings and handled in accordance with regulatory requirements to ensure safety during storage, transport, and use. The work is scoped to support the Defense Logistics Agency under the Department of Defense, with performance expected at FPO 96673. This is a subcontract under NAICS code 541620, with responses due by July 28, 2026, following a posting date of July 23, 2026. Compliance with federal hazardous materials regulations is mandatory, and failure to meet labeling or documentation standards could result in non-conformance or rejection of deliverables.

Environmental Consulting Services

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and preparation of electric water heaters in accordance with military standards, specifically incorporating the Air Exchange method and fiberboard boxing to ensure protection during transit and storage. All work must meet rigorous defense requirements for environmental resilience, durability, and handling under extreme conditions, ensuring the equipment remains fully operational upon arrival at remote or hostile locations. The scope demands strict adherence to standardized military packaging protocols to safeguard sensitive components against moisture, corrosion, vibration, and physical impact throughout the logistics chain. This subcontract is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 493190, indicating it relates to other support activities for transportation. The place of performance is designated as FPO with ZIP code 96673, suggesting delivery to a military postal location, likely overseas or in a deployed theater. Bidders must submit responses by the deadline of July 28, 2026, with the solicitation posted on July 23, 2026. The contract emphasizes compliance with government specifications and is intended to support defense logistics networks by ensuring reliable, condition-controlled delivery of critical heating units to military installations.

Other Warehousing and Storage

POSTED

DEADLINE

Electric Water Heater SupplyThe contract requires the supply of two military-specification electric water heaters, identified by NSN 4410015154021 and part number CD-17722V, for installation aboard the USS NORTH CAROLINA (SSN 777). These units must meet stringent defense standards for durability, performance, and safety in naval environments. The solicitation is issued as a subcontract under the Defense Logistics Agency, with the NAICS code 332410 indicating classification within the appliance manufacturing sector. The response deadline is set for July 28, 2026, and the place of performance is designated as FPO with ZIP code 96673, indicating delivery to a fleet or naval facility. All proposals must align with military procurement protocols and be submitted through the DIBBS platform prior to the specified deadline. The contract does not specify any set-aside provisions, and no point of contact is listed, suggesting standardized submission procedures.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

BELLOWS ASSEMBLY, VALVEThe contract pertains to the procurement of a 3-inch by 4-inch bellows assembly valve made of stainless steel, identified by NSN 4820-01-093-1688 and part number NMP-1065 PC 31, supplied by Emerson Automation Solutions. The item is a single unit requiring delivery within 20 days FOB destination, with zero variance allowed in quantity and inspection and acceptance both occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, with preservation method ZZ requiring Level A preservation as defined in the commodity specification, and marking must adhere to MIL-STD-129 without special markings. All packaging and preservation practices must meet DLA’s official packaging requirements, and palletization must follow RP001 guidelines. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for approved exceptions such as batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents designated by NAVSEA; portable devices with mercury must include shockproof construction and a secondary containment system per NAVSEA 5100-003D. The item is destined for the USS Ronald Reagan CVN 76, delivered to FPO AP 96616, with shipment details referencing DLA procedural notes C19 and C20 for transportation and freight instructions. The contracting vehicle is SPE7MC-26-T-153W, issued by the Defense Logistics Agency under the NAICS code 336310, with a response deadline of August 3, 2026, and an original required delivery date of July 24, 2026. Technical and quality standards are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and all requirements designated with an R or I number must be fully adhered to. The unit of issue is each (EA), and government use identifiers such as IPD, DIC, and DIST codes are included for administrative tracking. The point of contact for the procurement is Paula McClary at DLA, with electronic access to full requirements available through the DLA eProcurement portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

CUTTER BIT, TOOL HOLThe contract pertains to the procurement of two cutter bits with tool holders, identified by NSN 3455-01-331-9028 and part number 43-799-02, supplied by Illinois Tool Works, Inc. The total quantity is two units, each priced at $2.00, with a total contract value of $4.00, and delivery is required within 20 days FOB origin. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must conform to MIL-STD-129 and RP001 packaging specifications. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan with zero non-conformances required unless otherwise specified, with acceptance occurring at the destination. Packaging and palletization must adhere strictly to DLA guidelines, and the shipment must be sent via traceable means excluding parcel post. The delivery destination is the Everitt B Hunley USARC facility in Scottsburg, Indiana, and the freight shipping and marking address are identical. The contract references technical and quality standards identified by R and I numbers in the DLA Master List, and all labeling, marking, and unit of issue requirements must reflect the specified U/I and QUP values. The required delivery date is September 21, 2023, and the contract number is SPE8E5-26-T-3035.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

MODULATOR, RADIO TRANSMThe contract pertains to the procurement of seven MODULATOR, RADIO TRANSM units identified by NSN 5865-01-178-2734 under purchase request 7014870421. The solicitation, numbered SPE4A7-26-Q-0285, was posted on July 23, 2026, with a response deadline set for August 6, 2026. This request is issued by the Defense Logistics Agency, a division of the Department of Defense, and is categorized as a federal procurement. The solicitation does not specify a set-aside type, NAICS code, or detailed office address, but the place of performance and point of contact information are unspecified. Interested parties must respond through the official DIBBS platform via the provided UI link before the deadline to be considered for award.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

POLYURETHANE COATINThis contract is for the procurement of two quarts of polyurethane coating, specifically AXALTA COATING SYSTEMS LLC model 75CB2 with part number IMRON AF400 MIX QUALITY EP, identified by NSN 8010-01-711-2075. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, and it is subject to strict packaging, marking, and shipping requirements under MIL-STD-2073-1E and MIL-STD-129. Delivery must be made FOB destination within 20 days of contract award to the Marine Corps Air Facility in Quantico, Virginia, via traceable means only—parcel post is prohibited. The product is hazardous and must comply fully with the updated OSHA Hazard Communication Standard, requiring submission of Safety Data Sheets aligned with 29 C.F.R. 1910.1200 and appropriate labeling per GHS guidelines prior to award. Supplier employees must be trained on these requirements. Packaging must adhere to DLA-specific regulations, including special marking code 32 indicating Type I shelf-life status, and palletization must follow RP001 standards. The contracting office is the Defense Logistics Agency, and the solicitation number is SPE8ES-26-T-2440, with a response deadline of July 29, 2026, and an original required delivery date of July 27, 2026. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the item has zero variance allowance in quantity.

Paint and Coating Manufacturing

POSTED

DEADLINE

STRIP, ELECTRICAL GROUNThe contract pertains to the procurement of 139 units of a strip, electrical ground, identified by NSN 5999-01-616-1406, under solicitation number SPE7M5-26-T-348L, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a standard procurement timeline for federal acquisition. The item is classified under a federal procurement channel without a specified set-aside type or NAICS code, suggesting it is part of a general supply requirement. The place of performance and office address details are not provided, but the procurement is conducted through the DLA's DIBBS platform, with all documentation accessible via the provided link. The request is for a single line item in a quantity of 139, likely to support military or defense-related electrical systems requiring standardized grounding components.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

DRUM, SHIPPING AND STORThe contract solicitation pertains to a drum designed for shipping and storage, identified by NSN 8110-00-030-7780, with a requested quantity of one unit. Issued under solicitation number SPE8E9-26-Q-0483 by the Defense Logistics Agency on behalf of the Department of Defense, the opportunity was posted on July 23, 2026, and responses are due by August 24, 2026. This is a federal solicitation with no specific set-aside designation, indicating it is open to all qualified vendors without restrictions based on business size or category. The place of performance and office address details are unspecified, though the contracting agency operates within the United States. Interested parties can access the full solicitation details through the official DIBBS portal using the provided link.

POSTED

DEADLINE

in about 1 month

FILTER, BAND PASSA band pass filter with NSN 5915-01-630-9763 is being solicited under contract number SPE7M5-26-Q-0730 by the Defense Logistics Agency, a department of the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of August 7, 2026, and requests a single unit for procurement. This is a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general industry competition. The place of performance and office address details are not provided, but the contracting action is managed through the DLA’s DIBBS platform, with all relevant information accessible via the provided link.

Other Electronic Component Manufacturing

POSTED

DEADLINE