Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

EPOXY PRIMER COATIN

Active
SPE8ES-26-T-2495Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of an epoxy primer coating with part number M23377-1C-001P and NSN 8010-00-229-4813, requiring a 3:1 base-to-activator mixing ratio and compliance with MIL-PRF-23377K technical standards. The product must be sourced from a Qualified Products List (QPL)-approved manufacturer at the time of award and adhere to strict packaging requirements outlined in MIL-STD-2073-1E and MIL-STD-129R, including specific marking criteria and packaging levels. The item has a Type 2 shelf life of 12 months, extendable under RS001, and must be stored between 35 and 115 degrees Fahrenheit. Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels aligned with 29 C.F.R. 1910.1200 must be submitted for approval prior to contract award, and supplier employees must be trained on updated hazard communication protocols. Delivery is FOB origin within 20 days of contract award with zero variance allowed in quantity, and inspection and acceptance occur at origin. The item is to be shipped to a Defense Logistics Agency destination in Poprad, Slovakia, with freight handled by DF Young Inc. using DLO002, and all documentation must conform to DLA packaging and labeling mandates, including special shelf life marking code 33-33. The contract is governed by DLA master technical and quality requirements referenced through R and I numbers, and all materials are subject to defense information protection under RD003.

General Info

Epoxy primer M23377-1C-001P, 3:1 mix, MIL-PRF-23377K, QPL-approved, 12-month shelf life, FOB origin, shipped to Poprad, Slovakia.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325510 - Paint and Coating ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE8ES-26-T-2495.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Stephen Ockenhouse
contact@example.gov

Full Description

Show more
EPOXY PRIMER COATIN
EPOXY PRIMER COATIN
PPN: M23377-1C-001P
U/I = KT.
MIX RATIO 3:1 BASE TO ACTIVATOR
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer
SPE8ES-26-T-2495
SECTION B
for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-23377K NOT 1 REVISION NR K DTD 09/12/2019 PART PIECE NUMBER: M23377-1C1-001P
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-23377-19 NOT 1 REVISION NR 19 DTD 05/12/2009 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017750927 0001 KT 1.000
NSN/MATERIAL:8010002294813
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE8ES-26-T-2495
SECTION B
PR: 7017750927 PRLI: 0001 CONT’D
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
STORE MATERIAL BETWEEN 35-115 DEG F.
FREIGHT FORWARDER:
DLO002
DF YOUNG INC
BRIAN.TRAHEY@DFYOUNG.COM
1500 EAST 2ND STREET BLDG 2
EDDYSTONE, PA 19022
US
FREIGHT SHIPPING ADDRESS:
DLOG00
POC MAJ JAN KORENKO
VU 9994 POPRAD
KUKUCINOVA 5272
POPRAD
SK
MARKFOR
DLOG00
POC MAJ JAN KORENKO
VU 9994 POPRAD
KUKUCINOVA 5272
POPRAD
SK
M/F: (TCN) DLOG5462165129
RDD: A01
PROJ: TP 2
SUPP ADD: DA2QAF SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A31 DIST: N01 ADV: 2A FC: NL
Need Ship Date:00/00/0000 Original Required Delivery Date:08/07/2026
SPE8ES-26-T-2495 NSN/Part Number: 8010-00-229-4813 Quantity: 1 KT Purchase Request: 7017750927QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325510
New
DIBBS
RUST ARRESTING COAT
Solicitation # SPE8ES-26-T-2472
The contract calls for the delivery of a vinyl-acrylic copolymer resin system identified as Neutra Rust 661, designed to stop and prevent rust on ferrous metals such as iron or steel, with a National Stock Number of 8030013694416 and a unit of issue of one gallon. A total quantity of two gallons is required to be delivered within five days after receipt of order to Cannon AFB, New Mexico, under FOB Destination terms, with inspection and acceptance occurring at the delivery point. The product is classified as a Type I (Code H) item with a strict 12-month non-extendable shelf life, and must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 to indicate shelf life status. Packaging must adhere to DLA’s RP001 requirements for procurement, incorporate hazardous material handling protocols under IP025, and preserve the product in its original container in a cool, well-ventilated area away from direct sunlight. All containers must be labeled with the lot or batch number, manufacturer’s name, part number, storage instructions, and maximum VOC content, and must conform to commercial packaging standards unless otherwise specified. The product is categorized as a hazardous material under OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets (SDS) compliant with 29 C.F.R. 1910.1200 and approved HCS-compliant labels prior to award. Suppliers must also train employees on these requirements. Compliance with federal standards extends to the incorporation of technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers. Contract administration requires electronic invoicing and receiving reports through the Wide Area WorkFlow (WAWF) system, with no allowance for the IPP portal. The solicitation includes numerous FAR and DFARS clauses governing cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, whistleblower protections, safeguarding of defense information, and subcontracting for commercial items, all with approved deviations effective February 2026. Proposals must be submitted electronically via DIBBS by the August 7, 2026 deadline, with the contracting officer reserving the right to determine the final contract type at award, while the offeror must certify current UEI and CAGE codes, size status, and socioeconomic qualifications if
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325510
New
DIBBS
ENAMEL
Solicitation # SPE8ES-26-T-2468
The contract solicitation SPE8ES-26-T-2468 seeks the procurement of 45 gallons of semigloss yellow enamel conforming to MIL-PRF-24763, Type 2, with a maximum VOC content of 250 g/L and color specified as FED-STD-595 color number 23591. Each unit is a 3.79-liter container with a friction closure and bail handle, packaged in compliance with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including HM CLNG/DRY:1 preservation method. The item carries a non-extendable 12-month shelf life from the date of manufacture, and all packaging and labeling must adhere to MIL-STD-129R(3), including the lot or batch number and special marking code 32 to indicate it as a shelf-life item. Mercury and mercury-containing compounds are strictly prohibited unless used in approved functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable items requiring shockproof containment and a secondary boundary. All hazardous materials require OSHA-compliant Safety Data Sheets (SDS) and labeling under 29 C.F.R. 1910.1200, and suppliers must train employees on these requirements. Delivery is to be made FOB destination to Tracy, CA, within 27 days after order placement, with inspection and acceptance occurring at the destination. The contract mandates full compliance with DLA’s master list of technical and quality requirements, electronic invoicing via Wide Area WorkFlow, and adherence to all applicable DFARS and FAR clauses including NIST SP 800-171 for cybersecurity, prohibitions against hexavalent chromium and mercury in packaging, restrictions on covered defense telecommunications equipment, and requirements for small business subcontractor accelerated payments. Offerors must provide their Unique Entity ID and CAGE code and certify their size status and socioeconomic category, with additional reporting triggered for those providing covered telecommunications equipment or representing as a small business via joint venture. The solicitation requires electronic submission through DIBBS by the deadline and incorporates by reference the DLA Master Solicitation for Automated Simplified Acquisitions, but does not specify contract type, price, or evaluation factors beyond technical compliance and regulatory adherence.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATIN
Solicitation # SPE8ES-26-T-2498
This contract specifies the procurement of a polyurethane coating compliant with MIL-PRF-85285F, Type 4, Class H, Form M, Grade N, in FED-STD-595 Color 36293 Gray, designed for aircraft surfaces with extended weather resistance and a maximum VOC content of 420 grams per liter. The product is a high-solids, multi-component topcoat not resistant to phosphate ester hydraulic fluid and must be supplied by a QPL-approved manufacturer at the time of award. Each kit consists of two components packaged to yield 1.89 liters (2 quarts) and must be assembled in accordance with strict packaging directives under MIL-STD-2073-1E and MIL-STD-129, including labeling with lot numbers, hazard communication labels in compliance with OSHA’s revised Hazard Communication Standard, and Safety Data Sheets submitted for approval prior to award. Kits may be packaged under four approved methods—E6 box, heavy-weight plastic bagging, bonded cans with adhesive disks, or heat-shrink bonded cans—all requiring individual MIL-STD-129 labeling and an itemized contents list within each kit. Shipping must occur within five days of award to Keesler AFB, Mississippi, using the fastest traceable means only, with parcel post strictly prohibited. The item has a 12-month extendable shelf life classified as Type 2, Code 4, with storage temperature requirements of 60–80°F. The packaging must prevent movement and damage during transit, using appropriate dunnage and intermediate containers such as D3 boxes or 4G boxes if hazardous. All materials are subject to hazard communication requirements under 29 C.F.R. 1910.1200, including employee training on SDS and labeling. The contract quantity is six kits with zero variance in delivery, inspected and accepted at destination, tied to purchase request 7017733991 and NSN 8010-01-621-3072. The delivery deadline is August 6, 2026, and the solicitation issued by the Defense Logistics Agency requires strict adherence to technical, quality, packaging, and safety standards outlined in referenced military specifications and federal regulations.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATIN
Solicitation # SPE8ES-26-T-2491
This contract specifies the procurement of a polyurethane coating designated by NSN 8010-01-575-3001, meeting MIL-PRF-85285F standards as a Type I aircraft topcoat with a maximum VOC content of 420 grams per liter and a high-solids formulation containing isocyanates. The product is a two-component aerosol system, with each can weighing six ounces, sold in boxes of six, and must be gloss gray per FED-STD-595 color number 16440. It is subject to a 12-month shelf life, extendable under Code 4 requirements, and must conform to MIL-STD-2073-1E packaging standards with labeling per MIL-STD-129R, including lot or batch numbers and special marking code 33 for shelf life. Only manufacturers approved on the Qualified Products List QPL-85285-7 are eligible for award. Compliance with the revised OSHA Hazard Communication Standard is mandatory, requiring submission of Safety Data Sheets and compliant labels in accordance with 29 C.F.R. 1910.1200, along with employee training on hazardous material handling procedures. The coating is to be delivered FOB destination within 33 days, with no variance in quantity allowed, and must be shipped to the designated DLA receipt warehouse in Tracy, California. All packaging, marking, and transportation must adhere to DLA-specific requirements including RP001 and IP025, and the unit of issue is a box (BX), with a total order quantity of 55 boxes.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATIN
Solicitation # SPE8ES-26-T-2499
This contract requires the delivery of a polyurethane coating specified under MIL-PRF-85285F Type 4, Class H, Form M, Grade N, with a red color conforming to FED-STD-595 color 11136, packaged as a two-component kit totaling 2 ounces per unit. The product must be manufactured by a QPL-approved vendor at time of award and complies with strict shelf life requirements of six months, extendable, as defined by RS001 for TYPE 2 (CODE 2) items. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, ensuring each kit is contained in a single box sufficient to prevent damage, with internal cushioning, an itemized contents list, and proper marking including the special code 33 for shelf life. Kits may be packaged under specified options: E6 box with dunnage, heavy-weight plastic bag with heat-sealing, cans bonded with adhesive disks, or heat-shrink bonded cans, all creating a unified entity. Intermediate containers must be D3 boxes or 4G if hazardous, braced with proper dunnage. The coating is classified as hazardous material, requiring compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200), including submission of Safety Data Sheets (SDS) and compliant Hazard Communication labels for government review and approval prior to award. Supplier personnel must be trained on SDS, labeling, and regulatory requirements. Delivery is FOB origin with a strict five-day lead time and zero quantity variance. Six kits are required, to be shipped via traceable freight to Keesler AFB, Mississippi, explicitly prohibiting parcel post. The NSN 8010-01-583-2236 is subject to DLA packaging and marking standards, and all documentation must reflect current revisions of referenced military and federal standards. The contract’s required delivery date is August 6, 2026, with solicitation response due by August 10, 2026, and is issued under the Defense Logistics Agency with NAICS code 325510.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATIN
Solicitation # SPE8ES-26-T-2497
This contract specifies the procurement of a polyurethane coating designated as Gunship Quality, identified by NSN 8010-01-353-8313, and delivered as a kit consisting of two components (Parts A and B) that produce 7.57 liters (2 gallons) when combined. The coating must comply with MIL-PRF-85285F and meet strict technical requirements including a specular gloss reading of 3 or less when measured at 60 degrees, classifying it as Gunship Quality per Air Force Technical Order standards. It must be gray in color conforming to Fed-Std-595, Color 36081, and have a maximum VOC content of 420 grams per liter under a high-solids formulation. The product carries a 12-month shelf life and is classified as a Type II shelf-life item, requiring a minimum of 85% of its shelf life to remain upon delivery to the first government activity, with manufacturing and inspection dates clearly marked per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with all kit components placed in a single D3 box or a 4G box if hazardous, properly cushioned and braced to prevent movement and damage. Each box must be labeled with MIL-STD-129 markings, including lot or batch number and a special code 33 indicating Type II shelf life, and include an itemized contents list. If multiple boxes are required, they must be sequentially identified as part of a kit. The supplier must provide Safety Data Sheets (SDS) and HCS-compliant labels as mandated by OSHA’s revised Hazard Communication Standard and must train employees on these requirements. Delivery is FOB destination within five days, to Dyess Air Force Base, and must be shipped via the fastest traceable means, excluding parcel post. The item is subject to a Qualified Products List (QPL) requirement, meaning only QPL-approved manufacturers are eligible at award, and all packaging, marking, and shipping of hazardous materials must meet IP025 standards.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATIN
Solicitation # SPE8ES-26-T-2494
The contract specifies the procurement of polyurethane coating conforming to MIL-DTL-64159C, Type 3 self-contained portable kits that include Type 2 CARC coating in a touch-up system, with color matching Fed-Std-595, Color 34094 Green. The coating must be packaged in a dual cartridge system per A-A-59815, Type A or B, with a total capacity of 900 mL (600 mL and 300 mL chambers), and must be manufactured by a QPL-approved vendor at the time of award. The item carries a 12-month extendable shelf life under RS055 and RS001 requirements, and all technical specifications are governed by referenced standards including MIL-STD-129R, MIL-STD-147F, and MIL-STD-2073-1E for packaging and marking. Packaging must follow DLA packaging guidelines, with special marking code 33 indicating Type II shelf life status, and all units must be labeled and palletized as required. The order quantity is three cases, with delivery required within five days to Moody AFB, Georgia, FOB destination, under a zero variance clause. Shipment must be sent via the fastest traceable freight method, explicitly excluding parcel post, with detailed shipment identifiers and government-specific codes applied for tracking and compliance. Inspection and acceptance occur at the delivery point, and all materials must comply with hazardous communication standards and, where applicable, covered defense information protocols. The contract is issued under solicitation SPE8ES-26-T-2494 by the Defense Logistics Agency, with a required delivery date of August 6, 2026, and the item is assigned NSN 8010-01-586-2549.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325510
New
DIBBS
COATING COMPOUND, RE
Solicitation # SPE8ES-26-T-2496
This contract covers the procurement of a reflective coating compound with the NSN 8010-01-659-2206, specified under solicitation SPE8ES-26-T-2496, with a quantity of 10 quarts to be delivered within 20 days to a destination FOB point at Naval Station Rota, Spain. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, and all packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for shelf life code 32. Packaging and palletization follow DLA-specific requirements, and hazardous material handling adheres to IP025 standards. Technical and quality requirements referenced via R-numbers are governed by the DLA Master List, with inspections subject to MIL-STD-1916 or ASQ H1331 sampling, requiring zero non-conformances unless otherwise stated. The coating compound is manufactured by Hentzen Coatings Inc., part number 1440ALERTQT, and is not subject to Item Unique Identification per DFARS 252.211-7003(c)(1)(i). All deliveries must meet exact quantity tolerance of plus or minus 0 percent, with inspection and acceptance occurring at the destination. Transportation details are governed by DLA procedural notes C19 and C20, and the contract includes specific government tracking codes, a point of contact for inquiries, and an original required delivery date of June 15, 2026.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325510
New
SLED
Coating Materials SupplyThe contract calls for the supply of unopened, properly labeled coating materials including 100% solids epoxy, epoxy primer, and urethane topcoat, all of which must meet American Water Works Association standards to ensure durability and compatibility with water infrastructure applications. The materials are to be delivered to a specified place of performance in Palmdale, California, with a zip code of 93551, and must be received in full compliance with the technical and labeling requirements outlined in the solicitation. This is a subcontract opportunity under NAICS code 325510, which pertains to paint and coating manufacturing, and is actively open for responses until the deadline of September 2, 2026 at 9:00 PM Pacific Time. The contracting entity is the Antelope Valley - East Kern Water Agency, a public water agency based in California, and all proposals must be submitted through the designated online portal at the provided link.
Antelope Valley - East Kern Water Agency

POSTED

about 23 hours ago

DEADLINE

in 28 days
View Details
NAICS: 325510
New
SLED
Specialty Coatings and Materials SupplyThe City of Santa Ana is seeking suppliers to provide specialty durable coatings and materials specifically engineered for outdoor crosswalk applications, requiring high skid resistance, UV stability, and long-term color retention under heavy traffic and varying weather conditions. These coatings must perform reliably in a public infrastructure setting, resisting wear from vehicles, exposure to sunlight, rain, temperature fluctuations, and other environmental stressors while maintaining visibility and safety standards. This subcontract opportunity is open for bids with a deadline of August 13, 2026, and is categorized under NAICS code 325510, which pertains to paints and coatings manufacturing. The materials must be delivered and applied within the City of Santa Ana, specifically in the 92701 zip code area. The solicitation is posted on BidAmerica and requires vendors to submit proposals that demonstrate technical compliance with performance specifications, material durability, and suitability for high-traffic pedestrian environments.
City of Santa Ana

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 325510
New
DIBBS
Sealing Compound Manufacturing and Supply
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325510
New
DIBBS
Primer Coating SupplyThe contract pertains to the supply and delivery of 12 pints of primer coating identified by NSN 8010006169181, requiring full compliance with established military and technical standards. The product must be properly packaged and labeled according to regulatory requirements to ensure safe handling and identification throughout the supply chain. Delivery is structured under FOB destination terms, meaning the seller assumes all risks and responsibilities until the goods reach the designated location managed by the Defense Logistics Agency. The item falls under NAICS code 325510, classifying it within the paint and coating manufacturing sector, and is part of a subcontract issued by the Department of Defense through the Defense Logistics Agency. The contract was posted on August 3, 2026, and is linked to a specificaward record for tracking and fulfillment purposes.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 332812
New
DIBBS
Precision Metal Identification Plate Manufacturing
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity for Controlled Unclassified Information (CUI)The contract requires implementation of NIST SP 800-171 safeguards to protect Controlled Unclassified Information, including technical specifications and contract data, throughout the performance of the work. This subcontract falls under the NAICS code 541512 and is managed by the Defense Logistics Agency under the Department of Defense, with cybersecurity compliance being central to fulfilling obligations. The requirement applies to all handling, storage, transmission, and processing of CUI, ensuring that technical and administrative controls meet federal standards to mitigate risks associated with unauthorized access, disclosure, or compromise. Performance is subject to strict adherence to CUI protection protocols as mandated by NIST guidelines, and contractors must demonstrate the ability to maintain secure systems, conduct appropriate training, and enforce policies that safeguard sensitive but unclassified information. The subcontract is not subject to a specific set-aside designation and has no defined geographic performance location, indicating the work may be conducted remotely or across multiple locations as long as CUI handling remains compliant. The contract was posted in August 2026 and is accessible through the DIBBS system for award details and related documentation.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 541380
New
DIBBS
Radioactive Material Notification and LabelingThe contract requires compliance with strict protocols for screening components for radioactive material and adhering to labeling and notification standards outlined in MIL-STD-129 and DFARS 252.223-7. All subcontracted work must ensure that any presence of radioactive material is detected, documented, and reported in accordance with Department of Defense regulatory guidelines, with proper marking and documentation applied to shipments and components. The supplier is responsible for implementing quality control measures to verify the absence of radioactive contamination and for maintaining records that demonstrate compliance with federal defense acquisition regulations. This subcontract, awarded under the Defense Logistics Agency and classified under NAICS code 541380, is part of a broader Department of Defense procurement effort aimed at safeguarding the supply chain against inadvertent inclusion of radioactive materials. The contract mandates ongoing adherence to federal standards throughout the lifecycle of the components, from manufacturing through delivery, with an emphasis on accurate labeling and timely notification to relevant authorities. While no specific place of performance or point of contact is provided, the requirement is binding on all parties involved in the subcontracted work to ensure defense logistics integrity and regulatory compliance.
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Handling and Labeling ComplianceThe contract requires strict adherence to hazardous materials handling, labeling, and documentation standards for all substances used in washer preservation or packaging operations, ensuring full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement DFARS 252.223-7001. This includes accurate and legible labeling of containers with hazard warnings, proper safety data sheet (SDS) preparation and availability, and consistent communication of chemical risks to all personnel involved in handling or transporting these materials. The obligations apply regardless of location or scale of operations under the subcontract. This subcontract falls under NAICS code 561910 and is issued by the Defense Logistics Agency under the Department of Defense, with performance tied to defense-related washer preservation activities. The contract mandates that all labeling and SDS documentation meet federal regulatory thresholds without exception, and any failure to comply could result in contract default or corrective action. The requirement is non-negotiable and binding across all phases of material handling, storage, and shipment, ensuring that safety protocols align with both civilian occupational standards and defense acquisition mandates.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 332721
New
DIBBS
Flat Washer Manufacturing and SupplyThe contract involves the manufacture and supply of flat washers as a commercial item compliant with federal specifications, specifically requiring adherence to MIL-STD-129 for labeling and ASTM D3951 for packaging standards. The work is being performed under a subcontract arrangement with the Defense Logistics Agency, a component of the Department of Defense, and is classified under the NAICS code 332721, which pertains to screw, nail, and other fastener manufacturing. The solicitation was posted on August 4, 2026, and the performance location details are not specified, indicating the place of performance may be flexible or determined by the contractor. The contract does not include a specific set-aside designation or point of contact information, and the primary focus is on ensuring the product meets stringent military packaging and labeling requirements for federal procurement purposes.
Precision Turned Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding ComplianceThe contract requires implementation of NIST SP 800-171 security controls to safeguard Controlled Unclassified Information across all systems and processes under the subcontract. Compliance with these controls is mandatory to ensure the confidentiality, integrity, and availability of sensitive data handled in support of Department of Defense operations. The subcontractor must establish and maintain a robust cybersecurity posture aligned with the NIST framework, including access controls, audit logging, configuration management, and incident response protocols, all tailored to protect CUI from unauthorized access or disclosure. In addition to technical safeguards, the contract mandates adherence to DFARS cyber incident reporting requirements, obligating timely notification and documentation of any cybersecurity incidents affecting CUI. The subcontractor is responsible for demonstrating full compliance through documented policies, continuous monitoring, and potential assessments or audits by the Defense Logistics Agency. Performance is tied to the NAICS code 541512, indicating the work involves computer systems design services, and the agreement is structured as a subcontract under the broader Defense Department procurement framework. All activities must be conducted in support of Defense Logistics Agency missions, regardless of specific location, with an emphasis on systemic compliance rather than isolated technical fixes.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Military Shipment LabelingThe contract requires the provision of military-compliant packaging, preservation, and labeling services adhering to MIL-STD-129 and ASTM D3951 standards. This includes the use of desiccants to control moisture, vapor corrosion inhibitors to prevent metal degradation, and bar-coded labels for accurate tracking and inventory management throughout the supply chain. All work must meet stringent Department of Defense requirements for durability, environmental protection, and logistical traceability during storage and transit. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 493190 indicating it relates to other warehousing and storage activities. The solicitation was posted on August 4, 2026, and the place of performance and point of contact details are unspecified. The contract is administered through the DIBBS system with the award identification SPE7M326V3919, and the work is intended to support military shipment operations requiring rigorous packaging and labeling compliance.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Labeling and Compliance ServicesThe contract requires the preparation and submission of hazard warning labels for hazardous materials to ensure full compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, mandates accurate labeling that communicates the risks associated with hazardous substances in accordance with federal safety and procurement protocols. The work involves creating, reviewing, and delivering labels that meet stringent regulatory criteria for content, format, and placement to support safe handling and transportation of hazardous materials across defense supply chains. The solicitation falls under NAICS code 541690, which pertains to other scientific and technical consulting services, indicating that the effort centers on specialized compliance expertise rather than manufacturing or logistics. Performance of the contract is not tied to a specific geographic location, allowing for remote execution as long as deliverables adhere to federal standards. Issued on August 4, 2026, the contract is designated as a subcontract and does not specify a set-aside preference or recipient organization type, leaving eligibility open to qualified vendors capable of meeting technical and regulatory demands. All deliverables must align with the DLA’s operational needs and be submitted through the designated DIBBS portal to ensure visibility and accountability throughout the compliance process.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 332994
New
DIBBS
Hose Assembly Supply and DeliveryThe contract entails the supply and delivery of four nonmetallic hose assemblies, identified by NSN 4720011546337, each equipped with permanent fittings that meet specified military and Defense Logistics Agency standards. These assemblies are intended for use within defense systems and must adhere to strict quality and performance criteria established by the Department of Defense. The contract is classified as a subcontract under NAICS code 332994, indicating specialized manufacturing activities not elsewhere classified, and was posted on August 4, 2026, with no set-aside provisions for small or disadvantaged businesses. Performance is expected to be carried out under the purview of the Defense Logistics Agency, though specific delivery locations and points of contact are not detailed. The award reference number SPE7M326V3919 is linked to the official DIBBS portal for tracking and administrative purposes.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 322220
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-3973
The contract pertains to the procurement of 4 routing units of identification markers, each containing 500 units, with a part number L-8 and NSN 7690-01-241-6603, supplied by LabelMaster Co. These are classified as Type I shelf-life items with a strict 12-month expiration period from the cure date, non-extendable. At least 85% of the shelf life must remain at delivery, with expiration and cure dates clearly marked in calendar quarter and year as mandated by MIL-STD-129. The shipping and marking requirements follow MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for Type I shelf-life items. Packaging must avoid plastics where possible, and all units are to be delivered FOB origin within 20 days of contract award, with zero variance allowed in quantity. Delivery is directed to a U.S. military installation in Wackernheim, Mainz, Germany, and the shipment must comply with DLAD procedural notes C19 and C20 for transportation. The contract mandates adherence to the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The item is subject to government inspection and acceptance at destination, with no tolerance for deviation in volume or specifications.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
SOLDERING IRON, GAS
Solicitation # SPE8E5-26-T-3775
The contract specifies the procurement of one gas soldering iron, part number UT-100SI with NSN 3439-01-397-1285, manufactured by Master Appliance Corporation, under solicitation SPE8E5-26-T-3775. Delivery is required within 20 days from the contract award, with shipment terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including no special marking codes. Packaging and palletization adhere to DLA’s packaging requirements, and hazardous material handling follows IP025 guidelines. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is destined for the Distribution Management Office at Building 1710 in Iwakuni, Japan, under RDD 555 shipment directive, with transportation governed by DLAD Procedure Notes C19 and C20. The point of contact is Ira Hedgepeth, and the original required delivery date is July 30, 2026. The purchase request number is 7017722028, and the unit of issue is each. For government use only, the contract includes DIC A31, distribution ADV 2A, and FC CS codes. The item is classified under NAICS 333992, and all documentation must support source approval requests, with covered defense information potentially applicable. The contract mandates removal of government identification from non-accepted supplies and compliance with all DLA packaging and shipping protocols.
Welding and Soldering Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336320
New
DIBBS
TAILLIGHT, VEHICULAR
Solicitation # SPE8E7-26-T-3455
The contract pertains to the procurement of one vehicular taillight with NSN 6220016899479 and part number 4602052 from Hyster-Yale Group, Inc., under solicitation SPE8E7-26-T-3455. Delivery is required within five days of award, shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, with marking adhering to MIL-STD-129 and no special marking codes applied. The item is to be shipped via the fastest traceable means, excluding parcel post, to the USNS LUCY STONE at FPO AP 96692-7200, with the freight shipping address listed as MSC BATS San Diego. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date. The required delivery date is August 5, 2026, and the contract specifies the unit of issue as each, with a total price of one dollar. Government-specific codes and identifiers are provided for internal use including IPD, DIC, DIST, ADV, and FC designations. All vendor communications must reference the vendor service manager using TCN N2999662002028 and the project code ZS0 TP 1.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details