Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Erosion and Sediment Control

Active

Federal

Response Deadline08/14/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to erosion and sediment control measures necessary during construction activities to ensure compliance with environmental regulations. It requires the installation of silt fences, straw wattles, and inlet protection systems designed to prevent soil erosion and sediment runoff into nearby waterways. These measures are critical for maintaining water quality and meeting federal environmental standards throughout the project lifecycle. The work is classified under NAICS code 562910, which corresponds to remediation and other environmental services, indicating a focus on environmental protection and site restoration tasks. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, ensuring opportunities for qualified small firms to participate in federal environmental infrastructure projects. The solicitation was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 p.m. The contracting agency is the Department of Commerce, specifically NOAA, though the precise location of performance is not specified, suggesting the work may occur at multiple sites under NOAA’s jurisdiction. The contract emphasizes environmental compliance, requiring strict adherence to best management practices for sediment control during construction phases.

General Info

Small business subcontract for erosion control measures under NOAA, ensuring environmental compliance during construction.

Agency

Department Of Commerce NoaaView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

VA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 03:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Noaa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Noaa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of silt fences, straw wattles, and inlet protection to comply with environmental regulations during construction.

Similar Contracts

Same NAICS industry code

Animal Carcass Disposal and Rendering ServicesThe contract seeks a subcontractor to receive and properly dispose of large animal carcasses using approved methods such as composting, burial, or rendering, ensuring full compliance with environmental and public health regulations. Services must be conducted in accordance with state and federal guidelines to prevent contamination and safeguard natural resources. The work is tied to the Texas Department of Transportation and is expected to support animal carcass management efforts related to transportation incidents or emergency scenarios across the state. The solicitation was posted on July 28, 2026, with responses due by August 18, 2026, and falls under NAICS code 562910 for other waste management services. While the specific location of performance is not detailed, the work is anticipated to occur throughout Texas under the oversight of the Texas Department of Transportation. The contract is structured as a subcontract, and no set-aside provisions or small business preferences are indicated. All interested parties must adhere to regulatory standards and operational protocols to ensure safe, lawful, and environmentally responsible carcass disposal.

Texas Department of Transportation

POSTED

about 12 hours ago

DEADLINE

F108--Mold Remediation: Lyons Campus Building 10 Server RoomThe solicitation for mold remediation at the Lyons Campus Building 10 Server Room, identified by number 36C24226Q0677, is a 100% Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside under NAICS code 562910 with a size standard of $25.0 million. The work is located at the Veterans Affairs New Jersey Health Care System, 151 Knollcroft Road, Lyons, New Jersey 07939, and must be completed within 30 days. The contractor is responsible for providing all labor, supervision, materials, equipment, supplies, sanitized and labeled containers, transportation, facilities, and waste manifests. Scope of work includes establishing containment prior to remediation, cleaning and treating affected surfaces with antimicrobial solutions, applying sporicidal disinfectants, HEPA vacuuming, using antimicrobial coatings and cleaners to inhibit future mold growth, and applying a binding encapsulant with microband as needed. Final acceptance requires negative results from air clearance testing before removal and disposal of contaminants. The estimated contract value ranges between $25,000 and $100,000. All offerors must be registered in SAM.gov and verified as an SDVOSB through www.vip.vetbiz.va.gov at the time of submission and prior to award. Proposals must be submitted electronically; faxed or hand-delivered submissions are prohibited. The solicitation was posted on June 4, 2026, with a response deadline of June 9, 2026, at 10:00 a.m. Eastern Time. The contracting office is the Department of Veterans Affairs Network Contracting Office 02, with Lateisha Robinson as the primary point of contact. All additional details, including evaluation factors, contract clauses, and submission instructions, are to be contained in the full solicitation, which was expected to be released on or about June 12, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 16 hours ago

DEADLINE

CATS Fuel Treating and Cleaning of Diesel Storage TanksThe City of Charlotte, through its Charlotte Area Transit System (CATS) Facilities department, is seeking a vendor to provide fuel treating and cleaning services for eight diesel underground storage tanks located across two sites in the Charlotte metro area. The scope includes biocide treatments to prevent microbial growth, thorough tank cleaning to remove contaminants and sediment, and regular fuel sample testing to ensure fuel quality and compliance with operational standards. Services must be performed with strict adherence to environmental and safety regulations to safeguard the integrity of the fuel supply and storage infrastructure. All work is to be completed at the designated CATS facilities within North Carolina, with no alternative locations permitted. The solicitation, identified by number 269-2026-1974, was posted on July 27, 2026, and responses are due by August 24, 2026, at 7:00 PM eastern time. The contract opportunity is open to qualified service providers with demonstrated experience in diesel UST maintenance, fuel conditioning, and laboratory-grade fuel analysis. Andre Branch of the CATS Facilities department is the primary point of contact for inquiries and must be reached via email at andra.branch@charlottenc.gov. Prospective bidders are directed to the Bonfire Hub platform for full solicitation details and submission requirements.

City Of Charlotte

POSTED

DEADLINE

Environmental Remediation (Asbestos-Related Work)The contract requires the performance of environmental remediation activities related to the removal of HVAC systems, with specific focus on asbestos handling in compliance with federal and state regulations. Work must include thorough asbestos testing, installation of proper containment measures, abatement procedures, and safe disposal of hazardous materials, all aligned with EPA, OSHA, and Florida Department of Environmental Protection standards. This subcontract is part of a larger initiative managed by the Florida Department of Transportation, with performance expected to occur within the state of Florida, though exact location details are not specified. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, at 6:30 PM. The NAICS code 562910 classifies this work under Other Remediation Services, indicating specialized environmental cleanup expertise is necessary. Bidders must be prepared to demonstrate full regulatory compliance, qualified personnel, and appropriate equipment for asbestos abatement operations.

Florida Department of Transportation

POSTED

DEADLINE

Hazardous Materials Handling and Safety ComplianceThe contract requires comprehensive handling, labeling, and documentation of hazardous materials on-site at a location in Boston, Massachusetts, with strict adherence to federal OSHA standards and Massachusetts Right-to-Know Law. All materials must be properly identified, stored, and labeled according to regulatory requirements, and complete Material Safety Data Sheets or Safety Data Sheets must be submitted and maintained in compliance with legal mandates. The work involves consistent operational diligence to ensure workplace safety and regulatory compliance, with responsibilities extending to accurate recordkeeping and timely reporting of hazardous substance information. This is a subcontract solicited by the Massachusetts Procurement Agency under NAICS code 562910, with a response deadline of August 12, 2026, at 5:00 PM. The solicitation was posted on July 27, 2026, and the performance location is specified as Boston with a zip code of 02201. No set-aside type is designated, and the contract does not include a designated point of contact. All potential bidders must ensure full alignment with both state and federal hazardous materials regulations to meet the terms of performance and compliance obligations.

143 - Procurement

POSTED

DEADLINE

Lead Paint Abatement and Hazardous Material RemovalThe contract entails the complete abatement of lead-based paint and the removal of associated hazardous materials across a project site in Des Moines, requiring full compliance with federal environmental and OSHA safety standards. All phases of work—including containment, removal, handling, and disposal of lead-contaminated substances—must be executed by qualified personnel using approved methodologies to ensure worker and public safety, as well as regulatory adherence. The effort demands rigorous documentation, proper waste sequencing, and final clearance testing to confirm the site meets post-abatement safety thresholds. This subcontract opportunity, posted by the Iowa Department of Administrative Services on July 27, 2026, requires proposals to be submitted by August 20, 2026, and is classified under NAICS code 562910 for hazardous waste collection and treatment services. Work will be performed entirely at the designated location in Des Moines, with no additional geographic flexibility. While no specific set-aside provisions or point of contact details are provided, interested parties must adhere strictly to regulatory procedures and possess the necessary certifications and experience in lead abatement to meet all contractual obligations. The official bid information is available through the provided UI link.

Department of Administrative Services

POSTED

DEADLINE

Emergency On-Call Field CrewsThe City of Austin seeks subcontractors to provide 24/7 on-call field crew services for emergency water main breaks and urgent repairs across its service area. The contract requires immediate response capability at all times to ensure timely restoration of water service, minimize disruptions to public utilities, and maintain infrastructure integrity. Contractors must be prepared to mobilize crews, equipment, and materials around the clock to address urgent incidents regardless of time, day, or weather conditions. This subcontract, classified under NAICS code 562910, is open for response until September 3, 2026, with no set-aside provisions identified. Performance is expected within the jurisdiction of the City of Austin in Texas, and while specific geographic details are not defined, the work will focus on the city’s water distribution system. The solicitation was posted on July 27, 2026, and interested parties can access further information through the city’s official finance portal. Bidders must demonstrate proven capacity for emergency response, reliability, and compliance with all operational and safety standards expected by the city.

POSTED

DEADLINE

in about 1 month

Hazardous Materials Handling and Safety DataThe contract requires the identification, labeling, and proper management of hazardous materials including fuel, lubricants, and batteries used during the installation process, with strict adherence to safety protocols. The contractor must provide current Safety Data Sheets for all hazardous substances and maintain a comprehensive spill response plan to ensure rapid and effective containment and cleanup in the event of an incident. This subcontract is part of a Total Small Business Set-Aside under SBA guidelines, reserved exclusively for small businesses as defined by federal regulations, and is classified under NAICS code 562910 for waste collection and treatment services. Performance is required in Waco, Texas, with a response deadline of August 27, 2026, and the contracting authority is the Department of the Interior’s Mwr Midwest Region.

Mwr Midwest REGION(60000)

POSTED

DEADLINE

Media and Water Blasting for Corrosion RemovalThe contract requires media and water blasting services to remove corrosion and prepare metal surfaces on Aerospace Ground Equipment and Munitions Trailers to meet SSPC-SP 10/NACE No. 2 surface preparation standards, ensuring a near-white metal finish suitable for protective coatings. This effort is critical to maintaining the integrity and operational readiness of defense-related equipment by preventing further degradation and extending service life through proper surface conditioning. The solicitation is a small business set-aside under the SBA’s Total Small Business Set-Aside program, restricting eligibility to verified small businesses as defined by FAR 19.5. The work is tied to NAICS code 562910 for remediation services and will be performed at a location in Yigo, Guam with the ZIP code 96929. The opportunity was posted on July 27, 2026, and responses must be submitted by August 21, 2026, with the contracting activity under the Department of Defense’s FA5240 36 Cons Lgc office.

FA5240 36 Cons Lgc

POSTED

DEADLINE

Decontamination & Site Remediation ServicesThe contract calls for decontamination and site remediation services focused on rendering disintegrated or incompatible containers residue-free and ensuring storage trailers are thoroughly cleaned to meet safety standards for removal. The work requires specialized procedures to handle hazardous materials and eliminate contaminants that could pose risks during transport or disposal, with strict adherence to environmental and safety protocols. All activities must be conducted in compliance with federal regulations governing hazardous waste management and hazardous material handling. This is a subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside category, classified under NAICS code 562910 for remediation services. The opportunity was posted on July 27, 2026, with a response deadline of August 14, 2026, and is managed by the Department of the Interior under the Pwr Olym MABO office. While specific performance location details are not provided, the work is expected to be carried out at sites requiring remediation under federal oversight, and offers must be submitted through the official SAM.gov portal by the stated deadline.

Pwr Olym MABO(83000)

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThe contract requires the management and proper labeling of hazardous materials utilized in maintenance operations, ensuring all substances are accurately identified and handled in accordance with established safety protocols. A critical component of the scope involves the timely submission of Safety Data Sheets for each hazardous material, providing essential information on handling, storage, emergency procedures, and disposal. Compliance with all applicable environmental regulations is mandatory, requiring ongoing adherence to federal, state, and local standards governing hazardous waste management and workplace safety. This subcontract, posted on July 27, 2026, with a response deadline of July 29, 2026, is classified under NAICS code 562910 for Other Remediation Services and is associated with the Department of Defense through the FA2860 316 Cons Pk office. The work is to be performed in St. James, and the contract does not specify a set-aside type or point of contact, indicating the opportunity is open to eligible subcontractors without reserved status. Proposals must be submitted before the deadline to be considered for award.

FA2860 316 Cons Pk

POSTED

DEADLINE

in about 17 hours

Environmental RemediationThe contract titled Environmental Remediation is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 562910 covering environmental remediation services. It requires the contractor to perform soil testing, hazardous material abatement, and associated permitting activities, all to be completed at a designated place of performance in Grandview, Missouri, with a ZIP code of 64030. The solicitation was posted on July 27, 2026, and responses are due by August 6, 2026, giving interested parties a ten-day window to submit proposals. The contracting agency is the Department of Commerce, specifically under NOAA, though no further office address or point of contact details are provided. This effort is focused on environmental compliance and site remediation, demanding expertise in regulatory permitting, safe handling of hazardous substances, and accurate soil analysis to meet federal environmental standards.

Department Of Commerce Noaa

POSTED

DEADLINE

More opportunities from Department Of Commerce Noaa

Same awarding agency

Asphalt SupplyThe contract involves the supply of hot-mix asphalt produced at a certified plant that must meet strict performance-grade specifications to ensure durability and resistance to varying weather conditions. This is a subcontract classified as a Total Small Business Set-Aside under the SBA program, exclusively available to small businesses as defined by federal regulations, with the NAICS code 324121 indicating the industry standard for asphalt paving mixtures and blocks manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 PM, giving interested parties a limited window to submit proposals. The contracting agency is the Department of Commerce, specifically NOAA, though no specific office address or place of performance details are provided, implying the location may be determined post-award or is broad in scope. The procurement is focused solely on material supply, with no mention of installation or construction services, and all asphalt must conform to predefined technical standards to ensure long-term performance under environmental stresses.

Asphalt Paving Mixture and Block Manufacturing

POSTED

about 16 hours ago

DEADLINE

Concrete Supply for Site RepairsThe contract titled Concrete Supply for Site Repairs is a subcontract set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, with the NAICS code 327320 indicating it is for concrete product manufacturing. It involves supplying ready-mix concrete for targeted repairs to curbs, sidewalks, and drainage structures that occur during road resurfacing activities. The solicitation was posted on July 28, 2026, with responses due by August 14, 2026, at 3:00 PM. The contracting agency is the Department of Commerce, specifically NOAA, though no specific office address or place of performance details are provided. The work is expected to support infrastructure maintenance efforts tied to resurfacing projects, with the concrete supply required to meet the specifications necessary for durable, code-compliant repairs in these areas.

Ready-Mix Concrete Manufacturing

POSTED

about 16 hours ago

DEADLINE

Striping and Pavement MarkingThe contract titled Striping and Pavement Marking is a subcontract under a Total Small Business Set-Aside as defined by the SBA, designated for small businesses only, with a NAICS code of 238990 for other heavy and civil engineering construction services. It involves the installation of traffic striping, parking markings, arrows, and safety symbols on newly paved surfaces, requiring precision and adherence to industry standards for durability and visibility. The solicitation was posted on July 28, 2026, with proposals due by August 14, 2026, at 3:00 PM, and the work is to be performed for the Department of Commerce NOAA, though specific location details for performance or contact information are not provided. The contracting entity is the Department of Commerce, and interested parties must submit responses through the official SAM.gov portal before the deadline to be considered for award.

All Other Specialty Trade Contractors

POSTED

about 16 hours ago

DEADLINE

Asphalt Paving and ResurfacingThe contract titled Asphalt Paving and Resurfacing is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 237310 for Highway, Street, and Bridge Construction. It requires the application of hot-mix asphalt with complete grading, compaction, and finishing services that must comply with federal facility standards, ensuring durability, safety, and regulatory alignment for federal infrastructure. The opportunity was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 PM, and is managed by the Department of Commerce through its NOAA division, though specific performance location and point of contact details are not provided. All work must meet rigorous federal specifications for pavement quality and longevity, with the contractor responsible for full adherence to technical and procedural requirements without explicit deviations. The set-aside status ensures that only eligible small businesses may submit proposals, and performance is expected to uphold the quality benchmarks appropriate for government-owned facilities. While no place of performance or contact information is listed in the data, interested parties must reference the official SAM.gov link to access full solicitation details and submission guidelines prior to the deadline.

Highway, Street, and Bridge Construction

POSTED

about 16 hours ago

DEADLINE

Asphalt Milling and Surface PreparationThe contract titled Asphalt Milling and Surface Preparation entails the complete removal of existing asphalt layers using specialized milling equipment, followed by thorough debris cleanup and site preparation to ensure optimal conditions for subsequent resurfacing. All work must be performed in compliance with industry standards to guarantee a smooth, stable base for new pavement. The undertaking is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the SBA are eligible to bid, promoting opportunities for smaller enterprises within the federal contracting ecosystem. The North American Industry Classification System code 237310 applies, categorizing the work under Highway, Street, and Bridge Construction. The solicitation was posted on July 28, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM Eastern Time. The contracting agency is the Department of Commerce, specifically operating under NOAA, though no specific office address or point of contact details are provided. Performance location information is unspecified, indicating the project may involve multiple sites or that precise details will be determined post-award. The opportunity is accessible via the SAM.gov platform, and interested small businesses must submit proposals before the deadline to be considered for award under this set-aside program.

Highway, Street, and Bridge Construction

POSTED

about 16 hours ago

DEADLINE

RM Young Wind Monitors and Shields Spare PartsThe contract solicitation titled RM Young Wind Monitors and Shields Spare Parts is issued under solicitation number 1305M226Q0226 and is set aside exclusively for small businesses as defined by the SBA under FAR 19.5. It is classified under NAICS code 334519 and is being procured by the National Oceanic and Atmospheric Administration, a division of the U.S. Department of Commerce. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, at 7:00 PM Eastern Time. The primary point of contact for inquiries is Kyle Lawrence, reachable at kyle.lawrence@noaa.gov or by phone at 757-441-3835, and the office is located in Norfolk, Virginia, with a zip code of 23510. The spares required are specific to RM Young wind monitoring equipment and associated shields, and performance is expected to support NOAA’s operational needs, though no specific delivery location beyond the office address is provided. All submissions must comply with the requirements outlined in the combined solicitation document accessible via the provided SAM.gov link.

Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

EATON Valve Plugs for the National Logistics Support Center in Grandview, MOThe National Oceanic and Atmospheric Administration (NOAA) is seeking to award a firm fixed price contract for the procurement of EATON Valve Plugs, part number M-109, with NSN 4730-01-190-9157, for use at the National Logistics Support Center in Grandview, Missouri. This is a brand name requirement, as the EATON Valve Plug is essential to the maintenance and operational readiness of the NEXRAD weather radar system’s Azimuth Drive Module Assembly, and market research confirms no acceptable substitutes exist. Without this specific component, the National Weather Service cannot fulfill its Tri-Agency Agreement to maintain spare parts for critical infrastructure, potentially rendering radar systems inoperable. The contract is structured under FAR 12.203(c)(2), with award based on the lowest evaluated price of responsive, responsible quotes that meet all non-cost acceptability standards, including warranty, authorization, and compliance requirements. All offerors must be registered in the System for Award Management (SAM) with a valid Unique Entity Identifier (UEI), and must provide written confirmation of SAM status, small business status under NAICS code 332911, organizational conflict of interest disclosures, and a letter proving they are an authorized EATON reseller. The solicitation requires submission of quotes via email to abigail.green@noaa.gov by the deadline of August 4, 2026, with faxed submissions not accepted. Invoices must be submitted electronically through the Treasury’s Invoice Processing Platform (IPP), accompanied by a copy of the invoice, and payment requests must conform to specified FAR clauses. All delivered items must be individually packaged in unit shipping containers that meet MIL-STD-129M and MIL-STD-1189B marking standards, with exterior packaging palletized to 44x44 inches, shrink-wrapped and double-strapped in both directions, and stacked no higher than 48 inches. Each container must be clearly labeled with product, contract, vendor, and serialized container information, including total quantity of containers in the shipment. A one-year warranty against material defects and operational faults is mandated, and each shipment must include a Material Safety Data Sheet (MSDS). Delivery is to be made to 14200 Merritt Rd, Grandview, MO 64030, with partial and early shipments permitted, though contractors must consult with the contracting officer prior to delivery during government shutdown

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

SFSC Road and Parking Lot improvementsThe National Weather Service Sterling Field Support Center is soliciting bids for the resurfacing of roads and parking lots under contract SFSC Road and Parking Lot Improvements, identified by solicitation number 1305M226Q0224. This combined solicitation is exclusively available to small businesses as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 238990 applying to other heavy and civil engineering construction. The solicitation was posted on July 28, 2026, and responses are due by 3:00 PM Eastern Time on August 14, 2026. Work will be performed at the Sterling Field Support Center, with all contractual obligations tied to this location. The contracting office is part of the Department of Commerce, NOAA, located in Norfolk, Virginia, and the primary point of contact is Chelsea Vera, reachable via email at CHELSEA.VERA@NOAA.GOV or by phone at 757-828-6329. Interested parties must submit proposals through the SAM.gov portal using the provided link.

All Other Specialty Trade Contractors

POSTED

about 16 hours ago

DEADLINE

Renewable Energy Certificates (RECs)The National Oceanic and Atmospheric Administration (NOAA), through its Office of Chief Administration and Safety and Environmental Compliance Office, is procuring 10,409 megawatt-hours of Renewable Energy Certificates (RECs) to meet federal sustainability requirements under the Energy Policy Act of 2005 and Executive Order 14148. These RECs must be generated from eligible U.S.-based renewable sources such as wind and solar, commissioned on or after January 1, 2011, and verified within recognized tracking systems including WREGIS, M-RETS, NEPOOL-GIS, GATS, or NAR. All RECs must be Green-e certified or equivalent and retired exclusively for NOAA’s use by December 15, 2026, with no double-counting or use toward state Renewable Portfolio Standards. The solicitation is conducted as a combined synopsis and solicitation under FAR Part 12 as a commercial acquisition, with a firm-fixed-price structure and a Lowest Price Technically Acceptable (LPTA) evaluation method where technical compliance is a pass/fail threshold and price is the sole determinant for award. This procurement is a 100% small business set-aside under NAICS codes 221114 and 221115, with a 500-employee size standard. Offers must include a signed attestation confirming exclusive use by NOAA and submission of facility metadata, registry serial numbers, and commercial operation dates. Performance is centered at NOAA’s Silver Spring, Maryland facility, with FOB Destination terms applying. Payment must be submitted through the U.S. Department of the Treasury’s Invoice Processing Platform (IPP), and contractors are prohibited from using Wide Area Workflow (WAWF). Special requirements include security screening under CAR 1352.237-71 for personnel accessing federal facilities or IT systems, adherence to NOAA’s sexual assault and harassment prevention policy, and compliance with organizational conflict of interest provisions. No packaging, labeling, or military standards apply; commercial practices govern delivery. Clause deviations effective in early 2026 modify standard FAR language, and while no attachments or specific pricing data are provided, the award will be issued to the first technically compliant offeror submitting the lowest total price. All quotes must be submitted by July 31, 2026, to the designated point of contact.

Solar Electric Power Generation

POSTED

about 16 hours ago

DEADLINE

WingtraRAY UAS PlatformThe National Oceanic and Atmospheric Administration’s Great Lakes Environmental Research Laboratory is seeking information on potential vendors capable of supplying the WingtraRAY UAS platform, a tail-sitting fixed-wing vertical takeoff and landing drone designed for rapid deployment in environmental monitoring missions. The platform must feature a 125 cm wingspan constructed from carbon fiber, glass fiber, KEVLAR, and PVC, with a maximum takeoff weight of 5.2 kg and a payload capacity of 1.25 kg, enabling it to carry a LiDAR sensor and multispectral camera critical for mapping coastal inundation and validating flood forecasting models. The system must operate in challenging conditions, with wind resistance up to 12 m/s sustained and 18 m/s gusts, within ambient temperatures ranging from -10°C to 40°C, and must be powered by dual 99 Wh Lithium Polymer batteries with redundant GNSS compatibility across GPS, GLONASS, Galileo, and BeiDou systems. Flight endurance is specified at 59 minutes with hyperspectral payloads and 45 minutes with LiDAR, capable of surveying 550 hectares per hour, and must meet NOAA’s airworthiness certification standards for Wide Area Field Operations. Vendors must demonstrate that their offerings are domestically manufactured and capable of fulfilling all technical specifications without requiring secondary sensor integration, as the platform must provide true plug-and-play sensor connectivity. The response deadline is August 6, 2026, and interested parties — including small businesses, HUBZone, 8(a), Service-Disabled Veteran Owned, and Women Owned Small Business firms, as well as large businesses — must submit a brief narrative of no more than three pages, along with contact details, UEID and CAGE numbers, business size classification, and SAM registration confirmation. The solicitation falls under NAICS code 334511 with a total small business set-aside and is not a solicitation for bids or proposals; no contract will be awarded based on submissions, and no costs or damages will be reimbursed for participation. Responses are strictly for market research purposes to inform future procurement decisions, and proprietary information must be properly labeled to ensure protection under federal regulations. Delivery must be completed within 60 days of any future award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

LabView Software Enterprise Program RenewalThis solicitation, numbered 1305M326Q0297, is a combined synopsis and request for quotation under FAR Part 12 for the firm-fixed-priced renewal of NOAA’s LabView Enterprise Program EA-15701 to support the Chemical Sciences Laboratory in Boulder, Colorado. The acquisition is not set aside for small businesses and is conducted as a commercial item purchase, with no separate written solicitation issued. All required information including line items, quantities, and units of measure is provided in the attached SF1449 document, while the necessity for the specific brand-name software is justified in the referenced Brand Name Justification document. Delivery and acceptance terms are strictly f.o.b. destination, with performance locations defined in the contract clauses CAR 1352.246-70 and CAR 1352.270-70. Quotes must be submitted by the deadline of August 5, 2026, at 4:00 p.m. Eastern Time, with the point of contact listed in the SAM.gov posting. The solicitation incorporates all applicable provisions and clauses by reference, accessible electronically via acquisition.gov, with full details on applicable terms and conditions outlined in Section 3 of the RFQ attachment and the list of relevant provisions in Section 5. The North American Industry Classification System code for this acquisition is 513210, reflecting software publishing services. The contracting office is based in Seattle, Washington, and inquiries should be directed to Anthony Eubanks or Remo Dela Cruz at NOAA’s Department of Commerce.

Software Publishers

POSTED

about 16 hours ago

DEADLINE

AML MVP-Roam Underway Profiling SystemThe National Oceanic and Atmospheric Administration’s Office of Coast Survey, through its Center of Excellence for Operational Ocean and Great Lakes Mapping, intends to award a sole-source purchase order to AML Oceanographic Ltd. of British Columbia, Canada, for an MVP-ROAM underway profiling system. This procurement is justified under FAR 6.103-1 because AML is the sole manufacturer and provider of this specific system, with no authorized partners or resellers. The MVP-ROAM is the only commercial underway profiler designed for extreme portability, occupying minimal deck space and enabling rapid hand-portable deployment—critical for use on small training vessels and platforms where space is severely constrained. Alternative systems are too bulky, permanently installed, and incompatible with the COE’s operational needs. This system is essential for training NOAA’s hydrographic workforce and external partners in collecting continuous sound velocity data, a fundamental requirement for accurate multibeam bathymetry corrections. The MVP-ROAM integrates seamlessly with existing AML sensor systems through patented XCHANGE field-swappable sensor heads, wireless Wi-Fi data protocols, and Sailfish software architecture, creating a unified educational ecosystem. Introducing a competitor’s system would break this hardware and software integration, fragment training workflows, and necessitate redundant training modules. Extensive market research confirmed no other manufacturer offers a product with the same compact, lightweight, and portable design capable of meeting these unique requirements. Delivery is required within 120 days of award, and while this is a presolicitation notice with no competitive procurement planned, interested parties may submit substantiating documentation by August 12, 2026, to support a potential shift to competition. The North American Industry Classification System code is 334511, and no set-aside is applicable.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE