Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Transformer Cooling Liquid Replacement & Fluid Management

Active

Federal

Response Deadline08/10/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves replacing cooling liquid in up to two transformers, requiring full management of the fluid including testing, proper disposal, and recycling in compliance with all applicable environmental regulations. All work must be documented thoroughly to meet regulatory standards and ensure accountability throughout the process. The project is classified as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, reserved exclusively for businesses certified under this category. The North American Industry Classification System code is 562910, indicating it falls under waste collection, treatment, and disposal services. Performance is required at a location in White City, Oregon, with a zip code of 97503, and the contract is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, at 2:00 PM Eastern Time.

General Info

Replace cooling liquid in two transformers with full environmental compliance at White City, Oregon, for VA via SDVOSB set-aside.

Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)View Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

White City, OR, 97503, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 02:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Replace cooling liquid in up to two transformers, including fluid testing, disposal, recycling, and documentation per environmental regulations.

Similar Contracts

Same NAICS industry code

Eradication and Control of Invasive Aquatic Plant Species in CT Bodies of WaterThis contract covers the comprehensive management of invasive aquatic plant species across Connecticut’s water bodies, encompassing a range of services including aquatic herbicide application, mechanical harvesting, hand-pulling, installation of benthic barriers, monitoring, mapping, inspections, consultation, and detailed reporting. The scope is designed to support eradication, suppression, and long-term control efforts while ensuring environmental compliance and ecological stewardship. Services may be performed by qualified contractors under the authority of the Connecticut Department of Energy and Environmental Protection, with eligibility extended to other state agencies, municipalities, and political subdivisions upon authorization. The solicitation, identified as 26PSX0139, was posted on July 28, 2026, with responses due by August 18, 2026. It is administered through Connecticut’s DAS Procurement office and applies statewide wherever invasive aquatic plants pose a threat to native ecosystems, recreation, or water infrastructure. Primary contact for inquiries is Eva Orlinski, reachable via email at eva.orlinski@ct.gov. All work must be conducted within Connecticut’s water bodies, and the contract is intended for use by eligible public entities seeking to fulfill their regulatory and environmental management obligations related to invasive aquatic vegetation.

DAS Procurement

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Handling and Disposal ServicesThe City of Garland is seeking a subcontractor to provide comprehensive hazardous materials handling, transportation, and disposal services in strict compliance with federal environmental regulations, including CERCLA, RCRA, the Clean Water Act, and the Clean Air Act. The contractor must ensure all operations adhere to regulatory standards, from initial pickup through final disposal, with full documentation and use of certified, authorized facilities. All activities must be conducted with a focus on safety, environmental protection, and regulatory accountability, requiring meticulous records and certified chain-of-custody procedures throughout the lifecycle of hazardous waste management. The solicitation was posted on July 28, 2026, with a response deadline of August 11, 2026, and falls under NAICS code 562910 for hazardous waste collection and treatment. Performance location is not specified, but services are expected to support the City of Garland’s operational needs within Texas. This is a subcontract opportunity with no set-aside classification indicated, and interested parties must submit their proposals through the designated online portal prior to the stated deadline to be considered for award.

City Of Garland

POSTED

about 17 hours ago

DEADLINE

The Franklin County Board of Supervisors is reques ng sealed proposals from qualified contractors to provide Emergency Disaster Debris Removal Services in response to the tornado that impacted Franklin County on May 6, 2026. (Federal Disaster Declara onThe Franklin County Board of Supervisors is seeking qualified contractors to provide emergency debris removal services following a tornado that struck the county on May 6, 2026, under a federal disaster declaration. Contractors must submit sealed proposals by the August 14, 2026 deadline to respond to the solicitation numbered 128-20260727132922 FCBS, which is open to qualified firms capable of handling large-scale disaster recovery operations. The work will take place within Franklin County, Mississippi, and contractors will be expected to mobilize quickly, comply with federal and state disaster response protocols, and safely remove, transport, and dispose of debris generated by the storm. The solicitation is managed under the Mississippi Public Transportation and Affairs Program, and all bids must be submitted through the official state portal, with no set-aside provisions specified for small or disadvantaged businesses.

POSTED

about 17 hours ago

DEADLINE

Annual Asbestos And Lead Paint Abatement Services ContractThe County of Placer in Auburn, California, has issued an annual contract for on-call asbestos and lead paint abatement services, with a maximum value of $100,000 for a one-year term. This contract covers the safe removal of a wide range of asbestos-containing materials and lead-based paint from multiple county facilities, including drywall, acoustical wallboard and tile, vinyl floor tile, thermal system insulation, roofing materials, pipe insulation, cement board, joint compound, exterior siding, fireproofing, and duct insulation. Work will be initiated through individual Job Orders, each defining a specific scope and a fixed price, allowing for flexible and targeted response to urgent or scheduled abatement needs across county-owned properties. The solicitation, identified by number 20260727035, was posted on July 28, 2026, with proposals due by August 11, 2026, and falls under NAICS code 562910 for environmental remediation services. The contract is open to qualified contractors seeking to provide specialized abatement services under a government procurement framework.

County of Placer

POSTED

about 19 hours ago

DEADLINE

Animal Carcass Disposal and Rendering ServicesThe contract seeks a subcontractor to receive and properly dispose of large animal carcasses using approved methods such as composting, burial, or rendering, ensuring full compliance with environmental and public health regulations. Services must be conducted in accordance with state and federal guidelines to prevent contamination and safeguard natural resources. The work is tied to the Texas Department of Transportation and is expected to support animal carcass management efforts related to transportation incidents or emergency scenarios across the state. The solicitation was posted on July 28, 2026, with responses due by August 18, 2026, and falls under NAICS code 562910 for other waste management services. While the specific location of performance is not detailed, the work is anticipated to occur throughout Texas under the oversight of the Texas Department of Transportation. The contract is structured as a subcontract, and no set-aside provisions or small business preferences are indicated. All interested parties must adhere to regulatory standards and operational protocols to ensure safe, lawful, and environmentally responsible carcass disposal.

Texas Department of Transportation

POSTED

about 19 hours ago

DEADLINE

Lead-Based Paint Abatement & Hazardous Material DisposalThe contract involves the inspection, removal, and proper disposal of lead-based paint and other hazardous materials in accordance with EPA and OSHA regulations, requiring strict containment procedures and continuous air monitoring to ensure worker and public safety. All work must adhere to federal environmental and occupational health standards, with emphasis on preventing contamination during abatement activities and verifying clearance post-removal. This is a subcontract under the Indian Small Business Economic Enterprise set-aside, classified under NAICS code 562910 for remediation services, and is managed by the Department of the Interior’s School Operations division. Responses are due by August 27, 2026, and the project scope demands certified professionals capable of handling regulated hazardous waste, with performance expected to meet or exceed all regulatory compliance benchmarks for containment, decontamination, and documentation.

School Operations

POSTED

about 23 hours ago

DEADLINE

Erosion and Sediment ControlThe contract pertains to erosion and sediment control measures necessary during construction activities to ensure compliance with environmental regulations. It requires the installation of silt fences, straw wattles, and inlet protection systems designed to prevent soil erosion and sediment runoff into nearby waterways. These measures are critical for maintaining water quality and meeting federal environmental standards throughout the project lifecycle. The work is classified under NAICS code 562910, which corresponds to remediation and other environmental services, indicating a focus on environmental protection and site restoration tasks. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, ensuring opportunities for qualified small firms to participate in federal environmental infrastructure projects. The solicitation was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 p.m. The contracting agency is the Department of Commerce, specifically NOAA, though the precise location of performance is not specified, suggesting the work may occur at multiple sites under NOAA’s jurisdiction. The contract emphasizes environmental compliance, requiring strict adherence to best management practices for sediment control during construction phases.

Department Of Commerce Noaa

POSTED

about 23 hours ago

DEADLINE

Hazardous Ordnance and Explosives Maintenance SupportThe contract seeks specialized maintenance and handling support services in environments contaminated with unexploded ordnance or other explosive hazards, typically found on military installations or former ordnance disposal sites. The work requires highly trained personnel with expertise in safely identifying, managing, and mitigating risks associated with hazardous explosives, ensuring operational safety and regulatory compliance in sensitive areas. Performance will be centered in Newburgh, New York, with all tasks demanding strict adherence to federal safety standards and clearance protocols for handling unstable explosive materials. This is a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to respond, and the North American Industry Classification System code 562910 applies to remediation and other waste management services. The solicitation was posted on July 28, 2026, with proposals due by August 19, 2026. The contracting activity is under the Department of Defense through the W7NR Uspfo Activity Nyang 105, indicating the work supports defense infrastructure or legacy ordnance cleanup missions. Participation requires proven experience in explosive hazards response, specialized equipment, and the ability to operate under high-security conditions in restricted or contaminated zones.

W7NR Uspfo Activity Nyang 105

POSTED

about 23 hours ago

DEADLINE

Septic Tank and Piping RemovalThe contract involves the removal of an existing septic tank and all associated underground piping to prepare the site for new sewer infrastructure, with specific emphasis on the safe handling and disposal of residual waste to ensure environmental and regulatory compliance. The work is scheduled to take place in Bastrop, Texas, with a zip code of 78602, and falls under the NAICS code 562910, which categorizes it as other waste management services. This is a subcontract opportunity posted on July 28, 2026, with a firm deadline for responses set for September 4, 2026, at 6:00 PM. The contracting agency is listed as the Department of Justice under the FOA, though no additional organizational details or point of contact information is provided. All activities must be completed in accordance with applicable local, state, and federal regulations regarding hazardous material removal and site remediation.

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Fuel Removal at Sector Humboldt Bay Fuel FarmThe contract addresses the removal and proper disposal of contaminated fuel from two 10,000-gallon Jet A fuel tanks at the Sector Humboldt Bay Fuel Farm in McKinleyville, California, requiring the contractor to supply all personnel, equipment, transportation, tools, materials, and supervision necessary to complete the task in full compliance with OSHA and EPA regulations. The scope includes the safe evacuation of fuel, handling of waste materials, and environmentally sound disposal practices to ensure regulatory adherence and safety throughout the operation. This solicitation, numbered 70Z03126QALAM0002, is a Small Business Set Aside under NAICS code 562910 and was posted on July 28, 2026, with a response deadline of August 21, 2026. The contracting office is located in Alameda, California, under the Department of Homeland Security, and the primary point of contact is David Gibson, with Shawn Jenkins as the secondary contact. The work must be performed at the specified location in McKinleyville, and interested parties must submit proposals through the designated SAM.gov portal before the stated deadline.

Base ALAMEDA(00031)

POSTED

about 23 hours ago

DEADLINE

F108--Mold Remediation: Lyons Campus Building 10 Server RoomThe solicitation for mold remediation at the Lyons Campus Building 10 Server Room, identified by number 36C24226Q0677, is a 100% Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside under NAICS code 562910 with a size standard of $25.0 million. The work is located at the Veterans Affairs New Jersey Health Care System, 151 Knollcroft Road, Lyons, New Jersey 07939, and must be completed within 30 days. The contractor is responsible for providing all labor, supervision, materials, equipment, supplies, sanitized and labeled containers, transportation, facilities, and waste manifests. Scope of work includes establishing containment prior to remediation, cleaning and treating affected surfaces with antimicrobial solutions, applying sporicidal disinfectants, HEPA vacuuming, using antimicrobial coatings and cleaners to inhibit future mold growth, and applying a binding encapsulant with microband as needed. Final acceptance requires negative results from air clearance testing before removal and disposal of contaminants. The estimated contract value ranges between $25,000 and $100,000. All offerors must be registered in SAM.gov and verified as an SDVOSB through www.vip.vetbiz.va.gov at the time of submission and prior to award. Proposals must be submitted electronically; faxed or hand-delivered submissions are prohibited. The solicitation was posted on June 4, 2026, with a response deadline of June 9, 2026, at 10:00 a.m. Eastern Time. The contracting office is the Department of Veterans Affairs Network Contracting Office 02, with Lateisha Robinson as the primary point of contact. All additional details, including evaluation factors, contract clauses, and submission instructions, are to be contained in the full solicitation, which was expected to be released on or about June 12, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 23 hours ago

DEADLINE

K3E35-241220B - Consulting Services for Hydrometric Monitoring StationThe contract involves consulting services for the FSCAP classification, decommissioning, and reclamation of a creosote-contaminated hydrometric monitoring station located in Racehorse Creek, Alberta, alongside the design and construction of a new passenger-operated cableway. The work is being procured by Environment and Climate Change Canada’s National Hydrological Services under the Federal Contaminated Sites Action Plan to address environmental contamination and restore site functionality. All activities must adhere to federal environmental standards, with a focus on safe removal of contaminants, site reclamation, and the implementation of a durable, accessible cableway for operational use. The solicitation, issued under reference WS5174762016 and titled K3E35-241220B, was posted on July 6, 2026, with a strict bid submission deadline of July 30, 2026, at 2:00 PM Eastern Time. Late proposals will not be accepted under any circumstance. The contract is managed by the Government of Canada through Public Services and Procurement Canada, with Colin Simard listed as the primary point of contact for inquiries. Performance of the work is specifically required at the hydrometric station site in Alberta, and all bidders must ensure their proposals meet technical, environmental, and safety requirements without exception.

Department of Public Works and Government Services

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

Same awarding agency

Transformer Cooling Fluid SupplyThe contract requires the supply of manufacturer-specified cooling liquids, including mineral oil, in precise volumes tailored to each transformer model, ensuring compatibility and optimal thermal performance. All deliveries must be accompanied by comprehensive technical and safety documentation to verify compliance with industry standards and operational requirements. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under FAR 19.14, restricting eligibility to businesses owned and controlled by service-disabled veterans. The NAICS code 424690 classifies the procurement within the wholesale trade sector for miscellaneous durable goods, specifically pertaining to the distribution of industrial equipment and supplies. Performance is mandated at White City, Oregon, with a response deadline of August 10, 2026, and the solicitation was posted on July 28, 2026, under the 260-NETWORK Contract Office 20 (36C260), part of the Department of Veterans Affairs.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Transformer Site Logistics & Coordination SupportThe contract requires management of on-site logistics for 28 transformer locations, with all work coordinated during standard VA business hours. The contractor must oversee access to these sites and provide advance notice for any planned power shutdowns to ensure minimal disruption to operations. This effort is critical to maintaining the integrity and functionality of the transformer infrastructure under the Department of Veterans Affairs’ network. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, adhering to FAR 19.14, and is classified under NAICS code 541611 for management consulting services. Performance is localized to White City, Oregon, with a posting date of July 28, 2026, and a response deadline of August 10, 2026. The contract is structured as a subcontract and falls under the purview of the 260-NETWORK Contract Office 20, with no additional point of contact details provided.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Transformer Preventive Maintenance & CleaningThe contract requires the performance of comprehensive preventive maintenance on 28 liquid-cooled medium voltage transformers, including exterior cleaning, visual inspection, infrared thermal testing, and cooling liquid level and condition checks to ensure optimal operational integrity. All work must be conducted at the specified location in White City, Oregon, with a zip code of 97503, and must adhere to industry-standard protocols for electrical infrastructure maintenance. The services are essential for maintaining reliability and safety within the Department of Veterans Affairs’ facility infrastructure. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), as defined under FAR 19.14, and is classified under NAICS code 541330 for other scientific and technical consulting services. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, at 2:00 PM. The contracting office is the 260-NETWORK Contract Office 20 under the Department of Veterans Affairs, and all work must be performed by an eligible SDVOSB concern to comply with federal set-aside regulations.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Supply of Enhanced Intelligence Kit and PeripheralsThe contract is for the supply of an Enhanced Intelligence Kit and associated peripherals including smart sensors, diagnostic tools, and IoT-enabled devices designed for predictive maintenance and AI-assisted operations. These components are intended to support advanced operational capabilities through real-time data collection, analytics, and automated system monitoring. The solicitation is designated as a subcontract under NAICS code 334511, which pertains to the manufacturing of semiconductor and other electronic components. The opportunity was posted on July 28, 2026, with responses due by August 11, 2026, at 9:00 PM. Performance of the contract is expected to take place in Boise, Idaho, with a ZIP code of 83702. The contracting office is the 260-NETWORK Contract Office 20 within the Department of Veterans Affairs, though no specific point of contact or set-aside status is provided.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Performance Packs and Software UpgradesThe contract pertains to the supply and integration of Satisloh Performance Packs along with proprietary software upgrades designed to enhance automation, productivity, and process optimization for lens generators. These upgrades are critical for modernizing and streamlining lens manufacturing operations, ensuring precision, efficiency, and consistency in production workflows. The Performance Packs include hardware and software components tailored to improve machine performance, reduce cycle times, and support advanced lens design capabilities, with integration requiring technical expertise to align with existing equipment and operational standards. The solicitation is issued as a subcontract under the Department of Veterans Affairs, managed by the 260-NETWORK Contract Office 20, with performance required in Boise, Idaho, zip code 83702. The NAICS code 511210 indicates the scope relates to software publishing, though the delivery involves both physical hardware and specialized software implementation. The opportunity was posted on July 28, 2026, with a response deadline of August 11, 2026, at 9:00 PM EST, and there is no set-aside designation specified. All submissions must address technical compliance with Satisloh’s proprietary systems and demonstrate capability for seamless on-site integration and training, if required.

Software Publishers

POSTED

about 23 hours ago

DEADLINE

Supply of 2nd Fast Tool Option ModuleThe contract is for the supply of a second Integrated Fast Tool Option module designed to enhance the capabilities of the VFT-orbit-2i system by enabling high-speed, precision surface finishing and the fabrication of complex lens geometries. This module is critical for advancing manufacturing precision in optical components, particularly for applications requiring tight tolerances and intricate surface profiles. The work is to be performed in Boise, Idaho, with a delivery expectation aligned to the system’s operational requirements. The procurement falls under NAICS code 333517, indicating classification within the manufacturing of industrial machinery, specifically for machine tools. This is a subcontract issued by the Department of Veterans Affairs through its 260-NETWORK Contract Office 20, with a solicitation posted on July 28, 2026, and a response deadline of August 11, 2026, at 9:00 PM Eastern Time. No set-aside designation or preference category is specified, meaning the opportunity is open to all qualified contractors without restriction based on small business status or other classifications. While no point of contact is listed, submissions must be made through the SAM.gov portal linked in the solicitation, and performance will be expected to meet the technical specifications of the integrated fast tool system without deviation.

Machine Tool Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Collet Chuck VFT12-Leaf StandardThe contract is for the supply of the Collet chuck VFT12-leaf standard, a precision clamping device essential for securely holding lenses during optical fabrication on the VFT-orbit-2i system. This component ensures accurate and repeatable positioning of optical elements, critical to maintaining the high tolerances required in lens manufacturing. The solicitation is categorized as a subcontract under NAICS code 332721, which corresponds to precision optical instrument and equipment manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 11, 2026, at 9:00 PM Eastern Time, indicating a limited window for potential suppliers to submit proposals. The place of performance is specified as Boise, Idaho, with a ZIP code of 83702, meaning delivery and any on-site coordination must align with this location. The contracting office is the 260-NETWORK Contract Office 20 under the Department of Veterans Affairs, though no point of contact or set-aside status is provided, suggesting the opportunity is open to general qualified vendors without specific small business preferences.

Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Conveyor VFT-orbit-2i ISC (btF)The contract involves the supply of the Conveyor VFT-orbit-2i ISC (btF), an automated material handling system specifically engineered to interface with the Satisloh lens generator for the seamless transport of lenses during manufacturing. This equipment is critical to maintaining efficiency and precision in lens production workflows, ensuring accurate and consistent movement of components through the assembly process. The system is intended for integration directly into the existing manufacturing environment, requiring compatibility with existing machinery and operational protocols. This subcontract, posted on July 28, 2026, with a response deadline of August 11, 2026, is being procured by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20 (36C260). The place of performance is located in Boise, Idaho, with a zip code of 83702. The procurement falls under the NAICS code 423830, which corresponds to commercial machinery and equipment merchant wholesalers, indicating the nature of the goods being acquired as specialized industrial hardware. The contract does not specify a set-aside type or point of contact, and details regarding delivery timelines, technical specifications, or performance requirements are not provided beyond the system’s intended function and location.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Supply of Satisloh VFT-orbit-2i Lens GeneratorThe contract seeks the supply and delivery of a Satisloh VFT-orbit-2i lens generator, a computer numerical control machine designed for high-precision fabrication of ophthalmic lenses. The equipment must be delivered with full integration support to ensure seamless operation within existing production environments, including installation, configuration, and technical training to enable proficient use by facility personnel. The machine is critical for maintaining advanced manufacturing capabilities in vision care applications and must meet strict industry standards for accuracy and reliability. The solicitation is issued under subcontract authority by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20, with performance required at a location in Boise, Idaho, ZIP 83702. The opportunity was posted on July 28, 2026, and responses are due by August 11, 2026, at 9:00 PM local time. The North American Industry Classification System code 333517 confirms the scope pertains to optical instrument and lens manufacturing machinery. While no specific set-aside classification is indicated, interested parties must submit proposals by the deadline to be considered for award.

Machine Tool Manufacturing

POSTED

about 23 hours ago

DEADLINE

**AMENDED 002** -6640 - WSNC IDIQ Respiratory Fit Testing Equipment, Supplies, and Annual CalibrationsThe Department of Veterans Affairs is soliciting proposals under a Small Business Set Aside for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to procure respiratory fit testing equipment, supplies, and annual calibrations for use across the Western States Network Consortium. The contractor must supply brand-name or equal equipment, specifically the TSI 8048 PortaCount Respirator Fit Tester, along with all necessary ancillary supplies and scheduled calibration services to ensure ongoing compliance and operational readiness. This requirement supports the VA’s critical mission of maintaining respiratory protection standards for personnel within the consortium. The solicitation is amended under version 002, with the updated terms and conditions requiring thorough review by all respondents, and the deadline for proposals is August 15, 2026. The contract is administered by the 260-NETWORK Contract Office 20 located in Vancouver, Washington, with Robin Wilson listed as the primary point of contact. The North American Industry Classification System code is 334516, indicating the procurement falls within the manufacturing of measuring and controlling instruments. All performance is expected to support VA facilities within the Western States Network Consortium, though specific locations are not detailed in the posting.

Analytical Laboratory Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

VISN 5 Optical Fabrication Laboratory Lens Production MachinesThe U.S. Department of Veterans Affairs, through the 260-NETWORK Contract Office 20 in Vancouver, WA, is issuing a sources sought notice to identify qualified domestic vendors capable of supplying specific optical fabrication equipment for the Optical Fabrication Laboratory in Boise, ID. This notice is not a solicitation for bids or proposals but is intended to gather market intelligence on the availability and capability of suppliers to meet a potential future requirement for a Satisloh VFT-orbit-2i lens generator along with associated components including the Conveyor VFT-orbit-2i ISC (btF), Collet chuck VFT12-leaf standard, 2nd Fast Tool option, Performance packs, and peripherals. All responses must address the requirement for domestic end products, and submissions must align with the attached salient characteristics. Interested parties must submit their responses by August 11, 2026, at 9:00 PM ET, using the provided SAM.gov link, with questions directed to the designated points of contact, Jennifer Sease-Neville and Craig Ritchey. No set-aside designation applies to this action, and the NAICS code 339115 classifies the potential procurement under other medical, dental, and laboratory equipment manufacturing.

Ophthalmic Goods Manufacturing

POSTED

about 23 hours ago

DEADLINE

Transformer TestingThe Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) for transformer testing services at the VA Southern Oregon Health Care campus in White City, Oregon. The work involves cleaning, inspecting, and maintaining 28 liquid-cooled medium voltage transformers, including visual and infrared thermal inspections, testing and topping off cooling liquids per manufacturer specifications, and replacing coolant in up to two units. All tasks must be completed within a 32-hour window during VA business hours (8:00 AM – 4:30 PM), without unplanned power shutdowns, while strictly adhering to Lockout/Tagout procedures and applicable federal, state, and local safety regulations. The contract is intended to be awarded as a firm-fixed price agreement with a 90-day performance period following award, and the scope is tied to specific transformer locations, photos, and oil type/capacity data provided in Attachments A–C. The requirement is exclusively set aside for SDVOSBs under FAR 19.14, and only entities with valid SAM.gov UEI numbers and verified SDVOSB status are eligible to respond. Respondents must submit company information including business size classification, SAM.gov UEI number, and NAICS code 334416, along with supporting attachments detailing transformer specifications. Submissions must be made electronically via SAM.gov or GSA eBuy by August 14, 2026, at 10:00 AM Eastern Time, addressed to Robyn Akins at the Network Contracting Office 20 in Vancouver, Washington. The Government does not intend to award a contract based on this notice and will not pay for responses; this is purely for gathering market intelligence. Contractors must comply with CUI handling requirements for sensitive transformer data, maintain worker’s compensation, liability insurance, and tax compliance, and include specific invoice details such as contract number, service dates, itemized charges, and waste recycling weights. While no formal evaluation factors, payment instructions, or contracting officer representative assignments are provided, invoicing will be processed through the same contracting office, and prevailing wage requirements may apply if total labor hours exceed 32. No FOB terms, option periods, security clearances, or military standards are referenced, and all work must occur on-site without disrupting VA operations.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 23 hours ago

DEADLINE