Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Erosion Control and Landscaping

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the installation of erosion control measures and final site landscaping, encompassing seeding, sod placement, and mulching to restore and stabilize disturbed land areas. It is issued as a subcontract under the NAICS code 561730, which categorizes it within landscaping services, and is managed by the Department of Defense through the Aviation Supply Chain ESOC Buys organization. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, indicating a short turnaround period for qualified vendors to submit proposals. The place of performance and specific location details are not provided, and no set-aside provisions are identified, meaning the opportunity is open to all eligible contractors. The official solicitation page can be accessed through the DIBBS system for further procedural and technical requirements.

General Info

Erosion control and landscaping subcontract under DOD, due August 5, 2026, open to all eligible contractors.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

561730 - Landscaping ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of erosion control measures and final site landscaping including seeding, sod, and mulch.

Similar Contracts

Same NAICS industry code

On-Site Performance at Camp Edwards, MAThe contract pertains to on-site performance at Camp Edwards in Massachusetts, specifically requiring services that involve maintenance, inspection, or other site-related work that is subject to government review. All work must be conducted physically at the location listed as Beamon St, Camp Edwards, with a zip code of 02542, and is classified as a subcontract under NAICS code 561730, which corresponds to services for building and other property management. The solicitation was posted on July 29, 2026, and responses are due by August 20, 2026, at 3:00 PM. The contracting entity is the Military Division under the Massachusetts organization, and the work will be performed entirely at the designated installation, with no alternative locations permitted. The nature of the work demands direct presence on-site, and all deliverables will be subject to oversight and approval by government authorities, ensuring compliance with operational and safety standards.

MILDV - Military Division

POSTED

DEADLINE

COVB-27-101690 Services for Maintenance & Repairs of Stormwater Maintenance Facilities: BMP Mowing

Solicitation # IFB-125257

The City of Virginia Beach seeks contractors to provide comprehensive mowing and vegetation management services for Stormwater Management Facilities, including the removal of overgrowth, small saplings, and trees of all diameters from banks and bottoms of dry or shallow marsh SWMFs. The scope includes harvesting and removing all cut vegetation, with the option to mulch overgrowth and small saplings, and transporting all debris to approved waste facilities. Contractors are also required to collect and dispose of all trash and associated debris found within the facilities, ensuring no residual waste remains on site. All work must be performed using appropriate labor, materials, and equipment as necessitated by site conditions and operational requirements. This solicitation, identified as IFB-125257 under the title COVB-27-101690 Services for Maintenance & Repairs of Stormwater Maintenance Facilities: BMP Mowing, is open for responses until September 2, 2026. The contract is issued by the City of Virginia Beach, a state and local government entity, and performance is expected within Virginia Beach, Virginia. The point of contact for inquiries is Pinrecko Artis, reachable via email at partis@vbgov.com or phone at 757-385-4070. Bidders must be prepared to comply with all operational specifications outlined and ensure environmental compliance in debris removal and disposal practices.

City of Virginia Beach

POSTED

DEADLINE

in about 1 month

Landscaping and Site RestorationThe contract titled Landscaping and Site Restoration is a subcontract issued by the City of Santa Ana under NAICS code 561730, focusing on the installation or restoration of landscaping elements following construction activities. This includes essential tasks such as irrigation system setup or repair, planting of vegetation, and soil preparation or amendment to ensure proper ecosystem recovery and aesthetic enhancement. The opportunity is open for responses until August 7, 2026, at 9:00 PM Pacific Time, with work expected to be performed in Santa Ana, California, specifically within the 92701 zip code area. The contract is designed to rehabilitate site conditions after construction has concluded, ensuring compliance with municipal environmental and beautification standards. While no set-aside information or point of contact details are provided, the posting date of July 29, 2026, indicates it is a forthcoming solicitation intended to engage qualified subcontractors with expertise in post-construction site restoration.

City of Santa Ana

POSTED

DEADLINE

Swimming Pool and Fish Pond Grounds SupportThe contract titled Swimming Pool and Fish Pond Grounds Support is a Small Business Set Aside subcontract under NAICS code 561730, issued by the International Boundary and Water Commission: US-Mexico through Acquisitions - AQM Momentum. It encompasses routine landscape maintenance activities focused on areas surrounding swimming pools and fish ponds, including tasks such as cleaning, edging, weeding, and safety perimeter inspections. The scope explicitly excludes any work related to water chemistry, filtration, or mechanical system maintenance, ensuring that responsibilities remain strictly within groundskeeping boundaries. Performance is designated for Kingston, with responses due by August 28, 2026, and the opportunity was posted on July 29, 2026, targeting qualified small business contractors for localized, non-technical horticultural support.

Acquisitions - Aqm Momentum

POSTED

DEADLINE

Routine Grounds Maintenance ServicesThe contract is for routine grounds maintenance services at two U.S. Government facilities in Kingston, Jamaica, requiring weekly tasks including mowing, edging, trimming, weeding, debris removal, and irrigation system checks across lawns, flower beds, shrubbery, sidewalks, and parking lots. All work must be performed consistently to maintain the appearance and functionality of the site areas under the scope of the agreement. The solicitation is classified as a subcontract under a Small Business Set Aside - Total, identified by the NAICS code 561730 for landscape services, and is open only to eligible small businesses. The posting date is July 29, 2026, with responses due by August 28, 2026, at 3:00 PM. The contracting office is listed as Acquisitions - Aqm Momentum, operating under the International Boundary and Water Commission: U.S.-Mexico, though the physical performance location is limited to Kingston, Jamaica.

Acquisitions - Aqm Momentum

POSTED

DEADLINE

Restoration and LandscapingThe contract titled Restoration and Landscaping covers post-construction activities including site cleanup, utility repairs, landscape restoration, and repainting of affected surfaces to return the area to its original or approved condition. These services are required following the completion of a construction project at the US Embassy in Lilongwe, with the work intended to mitigate disturbances caused by prior activities and ensure the site meets environmental and aesthetic standards. The solicitation is classified as a subcontract under NAICS code 561730, which corresponds to landscape service activities, and is open for response until August 17, 2026, with the opportunity posted on July 29, 2026. The place of performance is exclusively in Lilongwe, and while the contracting agency is listed as the US Embassy Lilongwe, the overseeing organization is ambiguously referenced as the International Boundary and Water Commission: US-Mexico, suggesting potential administrative or procedural alignment rather than direct project oversight. No set-aside designation is specified, and no point of contact information is provided in the data.

US Embassy Lilongwe

POSTED

DEADLINE

Landscaping/Grounds Services - US Embassy Kingston

Solicitation # 19AQMM26R0340

The solicitation 19AQMM26R0340 for Landscaping/Grounds Services at the U.S. Embassy Kingston is a 100% Small Business Set-Aside under NAICS code 561730, with a total estimated value of $50,000, comprising a base year of $10,000 and four potential 12-month option periods each valued at $10,000. Work will be performed at the U.S. Embassy Compound on Old Hope Road and Colin Powell Plaza on Constant Spring Road in Kingston, Jamaica, covering comprehensive grounds maintenance including lawns, shrubbery, sidewalks, parking lots, sports courts, swimming pools, fish ponds, and trash collection areas, with services rendered Monday through Friday from 7:15 AM to 4:00 PM, excluding U.S. and Jamaican public holidays. The contract is structured as a Firm-Fixed-Price agreement evaluated under a Lowest Price Technically Acceptable methodology, where technical acceptability — including personnel qualifications, immediate availability, recruitment and retention plans, transition capability, quality control procedures, and adherence to schedule — takes precedence over price. The contractor must submit a Grounds Maintenance Plan, a Transition Plan within 10 days of award, a Quality Control Plan with inspection intervals and performance metrics, a list of personnel, and evidence of insurance at bid submission and again within 10 days of award. Insurance requirements include Workers’ Compensation, Liability, and Bonding coverage under FAR clauses 52.228-3, 52.228-4, and 52.228-5, with specific compliance for U.S. citizens and host-nation employees under DOL waiver provisions. Personnel must pass U.S. Government background checks, provide police reports not older than three months, and undergo bi-annual security revalidation; local nationals require RSO approval while U.S. and third-country nationals must obtain MRPT certification. Contractors must issue U.S. Government-issued identity cards to all personnel, which must be displayed at all times and returned upon departure. Overtime hours exceeding 240 annually require written approval from the Contracting Officer, with additional hours needing prior COR authorization. Inspections occur on-site, and the government may receive no more than three customer complaints per month; failure to meet service standards such as maintaining grass height between 4–6 cm, daily debris removal, and weekly irrigation

Acquisitions - Aqm Momentum

POSTED

DEADLINE

RFQ - Japanese Knotweed Management

Solicitation # nantucket-ma-814

The Town of Nantucket, through its Nantucket Airport Commission, is soliciting quotes for a two-year contract to manage Japanese knotweed at the Nantucket Airport. The request for quotes, issued under solicitation number nantucket-ma-814, was publicly posted on July 29, 2026, with responses due by August 19, 2026, at 2:00 AM. Quotes must be submitted via email to vilieva@nantucketairport.com, and the solicitation will be opened publicly at 2:01 PM on the same day. The work is expected to focus on controlling and eradicating invasive Japanese knotweed to protect airport infrastructure and environmental integrity. Interested parties can access the full solicitation documents on the town’s official bidding website, and the plan holders list is available upon request. The contract is open to qualified vendors without specific set-aside provisions, and all submittals must comply with the posted deadlines and formatting requirements. Business hours for inquiries are Monday through Friday, 7:00 AM to 3:00 PM.

Town of Nantucket

POSTED

DEADLINE

Traffic Control and Signage ManagementThe contract involves the installation and management of temporary traffic control measures for chip seal operations, including signage, cones, and flagging services to ensure public safety and orderly traffic flow during road maintenance activities. The work must be performed in accordance with standard traffic control protocols and is specifically tied to projects managed by the Colorado Division of Parks and Wildlife under the NAICS code 561730, which covers support activities for road transportation. The subcontract is intended to support infrastructure maintenance efforts within state-managed areas, requiring precise coordination and adherence to seasonal and operational timelines. The solicitation was posted on July 29, 2026, with a strict response deadline of July 31, 2026, leaving a narrow window for interested parties to submit proposals. Performance location details are not specified beyond the state-level jurisdiction of Colorado, indicating that work may occur across multiple sites under the agency’s oversight. The contract is classified as a subcontract, suggesting it may be awarded to a vendor supporting a larger prime contractor or government entity. Although point of contact information is absent and the place of performance lacks geographic precision, all activities must comply with state and federal standards for temporary traffic control systems during road surface treatments. Interested bidders must respond through the provided online portal prior to the deadline.

DNR - Division Of Parks & Wildlife

POSTED

DEADLINE

Artificial Turf InstallationThe contract pertains to the professional installation of artificial turf at a location on Memorial Road in Somerville, Massachusetts, with the zip code 02152. The work includes comprehensive services such as seaming of turf sections, application of infill materials, installation of edging, and a final inspection to ensure quality and compliance with standards. The contract is classified as a subcontract under NAICS code 561730, which corresponds to landscape services. It was posted on July 29, 2026, and responses must be submitted by August 27, 2026. The contracting entity is the Somerville Housing Authority under the Massachusetts agency structure, though no specific point of contact or set-aside information is provided. The place of performance is clearly identified as Memorial Road in Somerville, and the solicitation details are accessible through the provided online link for further submission requirements.

SHA05 - Somerville Housing Authority

POSTED

DEADLINE

Sod Installation and Site PreparationThe contract calls for comprehensive land preparation and professional sod installation at a site located on Memorial Road in Somerville, Massachusetts, with a zip code of 02152. The work includes clearing, grading, and fully preparing the soil to ensure optimal conditions for sod installation, requiring skilled labor and adherence to industry standards for landscaping and site development. The task is classified under NAICS code 561730, indicating it falls under landscaping services, and is structured as a subcontract opportunity issued by the SHA05 - Somerville Housing Authority under the Massachusetts agency. The solicitation was posted on July 29, 2026, with a response deadline of August 27, 2026, allowing interested parties sufficient time to prepare and submit proposals. While no specific set-aside classification or point of contact is provided, the place of performance is clearly defined, and all work must be executed on-site at the specified location. Contractors must be prepared to deliver high-quality results in a timely manner, ensuring compliance with all specifications related to land grading and sod establishment without the use of misleading or non-compliant materials or methods.

SHA05 - Somerville Housing Authority

POSTED

DEADLINE

Mystic River Artificial Turf Installation

Solicitation # BD-23-1825-SHA05-SHA05-131701

SHA05 - Somerville Housing Authority

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

Solicitation # SPE4A0-26-T-4090

The contract pertains to the procurement of flat washers identified by NSN 5310015726401 and part number 17095125, with a unit of issue of package (PG), where one package contains 125 units. The requirement is for a single package to be delivered within five days FOB origin, with no tolerance for quantity variance. Delivery is to be made to Fort Stewart, Georgia, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA packaging requirements, and shipment must be executed via traceable freight methods—parcel post is prohibited. The item is subject to stringent quality control provisions, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with zero nonconformances permitted unless otherwise specified. Critical attributes are assigned verification levels or AQLs, and unspecified attributes are treated as major. The washer is also subject to requirements regarding physical identification, removal of government identification from non-accepted supplies, and potential handling of covered defense information. Technical and quality standards referenced are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition size. The supplier must comply with all marking, documentation, and shipment directives, including the use of the provided military shipping address and the assigned contract line item number. The original required delivery date is July 24, 2026, and the solicitation was issued under contract SPE4A0-26-T-4090.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A0-26-T-4084

This contract pertains to a special-purpose electrical cable assembly identified by part number A14G2816-1 and NSN 6150015153470, required in a quantity of one unit with strict delivery terms of five days from the order. The item is designated as a critical application for Boeing and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance for both manufacturers and non-manufacturers. Quality assurance mandates adherence to ISO 9001:2015 along with tailored higher-level requirements, and all supplies must be marked in accordance with MIL-STD-129 and DLA packaging standards, though government identification must be removed from non-accepted items. Sampling follows MIL-STD-1916 or an equivalent zero-based plan with zero non-conformances permitted unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on their classification. Unit of issue is each, and delivery is FOB origin with inspection and acceptance occurring at the destination. Packaging complies with MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containerization outlined, and palletization must meet DLA procurement guidelines. The item is not required to bear Item Unique Identification as per customer request. Shipment must be sent by the fastest traceable means, explicitly excluding parcel post, to the specified joint base address. The contract is linked to purchase request 7017554637 and has a required delivery date of July 21, 2026, with the solicitation closing on August 6, 2026, under the NAICS code 334419 and managed by the Department of Defense’s Aviation Supply Chain ESOC.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4088

This contract specifies the procurement of a machine screw with part number 12542766 and NSN 5305-01-716-2546, requiring exactly three units delivered within five days of order placement under solicitation SPE4A0-26-T-4088. The item is source-controlled and must be manufactured and tested in accordance with limited rights data that only approved vendors possess; vendors without direct access to this data or traceability to approved sources are not eligible to quote. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking code. The screw is not subject to shelf life restrictions, and item unique identification is explicitly waived per DFARS 252.211-7003(c)(1)(i). Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Delivery is FOB origin to a U.S. military installation in Dongducheon, South Korea, with inspection and acceptance occurring at the destination. All supplies must be palletized per DLA guidelines, and shipping is governed by specific DLA procedures C19 and C20. The supplier must be source-approved, and a SAR package is required for new vendors seeking approval. The original required delivery date is July 24, 2026, with the solicitation posted on July 29, 2026, and responses due by August 6, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

NUT , SELF-LOCKING, PL

Solicitation # SPE4A0-26-T-4091

The contract specifies the procurement of two self-locking plate nuts, part number MS21060L6, with NSN 5310-00-779-6633, under solicitation SPE4A0-26-T-4091. These items are classified as critical application components and must comply with technical and quality standards referenced in the DLA Master List, including NASM21060 Revision 3 and NASM25027 Revision 1, with quality assurance provisions EQ003 and QAP-13873 governing inspection and verification. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be assessed at specified verification levels or AQLs. Packaging and marking are mandated to adhere to MIL-STD-2073-1E and MIL-STD-129, with prohibition of mercury or mercury compounds in all packaging operations. The items must be delivered FOB origin within five days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is directed to Naval Air Station North Island in San Diego, California, with specific freight and parcel post instructions excluding parcel post in favor of traceable shipping methods. The contract includes detailed logistical parameters such as unit of issue, packaging codes, container specifications, and identification codes for government use. The required delivery date is May 14, 2026, and the contract was posted with a response deadline of August 6, 2026. The purchasing organization is the Department of Defense’s Aviation Supply Chain ESOc Buys, coordinated by Danita Davis, and the procurement falls under NAICS code 332722 for screw machine product manufacturing. All items must meet DLA packaging requirements RP001 and special marking conditions indicate no additional special markings are required.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

PIN, STRAIGHT, HEADED

Solicitation # SPE4A0-26-T-4089

The contract specifies the procurement of a PIN, STRAIGHT, HEADED item with NSN 5315-01-537-0276 and quantity of one unit, to be delivered FOB origin within five days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition size. The item is classified as a critical application and must conform to specified technical data packages and drawings dated through November 2024. Physical identification is required per RQ017 but item unique identification is waived per DFARS 252.211-7003(c)(1)(i). Quality requirements include non-tailored ISO 9001:2015 compliance alongside tailored higher-level quality provisions, and inspection and acceptance occur at origin. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with acceptance criteria of zero non-conformances unless otherwise stated. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA packaging directives. The item must be marked and labeled per contractual specifications, and the sole delivery destination is Storck Barracks Building 6503 in Illesheim, Germany. The certificate of conformance is authorized unless explicitly withheld, and all packaging and marking must reflect the designated unit of issue and quantity per unit pack as defined in the contract. The purchase request number is 7017622999, with an original required delivery date of July 24, 2026, and the solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026.

Hardware Manufacturing

POSTED

DEADLINE

PIN, DRIVE, GUIDED

Solicitation # SPE4A0-26-T-4093

The contract issued by the Defense Logistics Agency under solicitation number SPE4A0-26-T-4093 seeks two guided pin and drive units identified by NSN 5315-01-380-5136, with delivery required within five days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The supplier must comply with DLA packaging standards and adhere to strict configuration change management protocols, including formal engineering change proposal procedures and variance requests for any deviations. Cybersecurity requirements mandate CMMC Level 2 certification through an approved third-party assessment organization, and all contractors handling technical data must be vetted under the US/Canada Joint Certification Program, trained on proper handling of DOD export-controlled information, and authorized by DLA to access controlled data. The technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Item unique identification is not required per customer request, and government identification must be removed from non-accepted supplies. The place of performance is FPO, ZIP 96675, with Danita Davis as the primary point of contact, and responses are due by August 6, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4085

The contract pertains to the procurement of one washer, key, identified by NSN 5310-01-285-5607 and multiple part numbers including 035051008AB, 35051-8-AB, and 801627-099-31C, supplied by Reliance Electric Company DBA 71956. The item is designated as a critical application item and must comply with stringent technical and quality requirements referenced via the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Physical identification and bare item marking are mandatory as per RQ017, and packaging must adhere to ASTM D3951 while fully complying with MIL-STD-129 labeling and RP001 DLA packaging standards, including palletization. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Delivery is due within five days FOB destination to FPO AP 96349, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must reflect the specified unit of issue and quantity per unit pack. The contract is governed by the DLA acquisition system with compliance to federal procurement protocols, including freight shipping instructions, transportation protocols, and government-specific identification codes. The original required delivery date is July 24, 2026, with a solicitations response deadline of August 6, 2026, issued under contract number SPE4A0-26-T-4085 by the Department of Defense through the Aviation Supply Chain ESOC Buys unit.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

INDICATOR, SIGHT, LIQ

Solicitation # SPE4A0-26-T-4095

The contract pertains to the procurement of one unit of an Indicator, Sight, Liqui, with part number 6680-01-533-9817, supplied by ERNST JOHN C & CO INC under purchase request 7017493599. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. No special marking is required, and the item does not have a shelf life. The material is not classified as hazardous, with mercury and mercury-containing compounds explicitly prohibited from intentional addition or direct contact with the item, except for functional uses in batteries, sensors, or specific instruments as defined by NAVSEA, and portable devices must include a secondary containment. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with verification levels assigned per critical, major, and minor attributes, and acceptance requires zero non-conformances unless otherwise specified. The item is not subject to Unique Item Identification, and a Safety Data Sheet is not required. The shipment must be dispatched via a traceable method, excluding parcel post, to the designated delivery point at Fort Campbell, Kentucky. The contract references the DLA Master List of Technical and Quality Requirements, and all technical and quality specifications are incorporated by reference. The solicitation was issued on July 29, 2026, with a response deadline of August 6, 2026, and the required delivery date is July 15, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

PIN, QUICK RELEASE

Solicitation # SPE4A0-26-T-4086

The contract specifies the procurement of two quick release pins identified by NSN 5315-01-494-3040, each priced at $2.00, with a total value of $4.00, delivered FOB origin within five days of order placement with zero tolerance for quantity variance. The item must conform to the current revision of the non-government standard NASM14531 and related standards NAS1322 through NAS1326, and any hardware manufactured after the solicitation date must meet the latest revision of these standards. Inspection and acceptance occur at origin, with sampling required to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise defined, and critical attributes must be verified at Level VII or with an AQL of 0.1. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization strictly following DLA Packaging Requirements, and all DLA Master List technical and quality requirements supersede ASTM standards. The pins are destined for two locations: Marine Corps Forces Central Command at MacDill AFB, Florida, and Fleet Readiness Center West in Lemoore, California, with both shipments requiring fastest traceable transport and prohibiting parcel post. Delivery is due by July 24 and July 28, 2026, respectively, under solicitation SPE4A0-26-T-4086, with the point of contact being Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC.

Support Activities for Coal Mining

POSTED

DEADLINE

SCREW, CAP, SOCKET HE

Solicitation # SPE4A0-26-T-4094

The item is a socket head cap screw identified by NSN 5305-01-551-6596, with a required quantity of six units, under purchase request 7017623167, and must be delivered within five days of award. The solicitation is issued by the Defense Logistics Agency under number SPE4A0-26-T-4094, with a response deadline of August 6, 2026, and is classified under NAICS code 332722. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. The item itself requires physical identification or bare item marking. This item includes technical data subject to U.S. export controls under ITAR or EAR, making any disclosure or transfer to foreign persons—regardless of location—restricted without prior authorization. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with active JCP certification, completed export control training, and approved access through the DLA questionnaire are permitted to handle this technical data.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4087

The contract pertains to the procurement of one machine bolt identified by NSN 5306-01-699-5097 and part number B18.24-2004, complying with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any other specifications including ASTM D3951. The item must be manufactured in accordance with ANSI B18.24A Revision A dated 01/01/2006 and inspected using MIL-STD-1916 or ASQ H1331 Table 1 sampling methods, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. All packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with no government identification removed from non-accepted supplies. The unit of issue is EA, with exact quantity delivery required and no variance permitted. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The item must be delivered within five days of order and shipped using traceable means, excluding parcel post, to the designated military address at Fort Bliss, Texas. The shipment is designated as RDD NMCS and linked to project TP 1 and supplier code W9046W. The contract number is SPE4A0-26-T-4087, with a required delivery date of July 24, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC Buys office.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

NUT, SELF-LOCKING, BARRE

Solicitation # SPE4A0-26-T-4092

Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds now set at $150,000, and must disclose any non-domestic materials in their quotations. The use of covered telecommunications equipment or services is prohibited, and offerors must affirm compliance with FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for eligibility under specific small business categories. Quantity ranges are strongly encouraged due to fluctuating demand, as manual evaluation allows buyers to consolidate or adjust quantities without administrative delays, though this does not apply to Auto IDC. The submission of a “No Bid” on DIBBS is advised if quoting after the closing date to prevent assumptions of non-procurability. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and continue shipping; those using VSM WebServices must update their internal schema by April 23, 2025. Additive manufacturing is prohibited unless specifically approved by the contracting officer. The solicitation seeks 4 self-locking barrel nuts under NSN 5310-01-061-3323 for delivery within five days, with a solicitation number SPE4A0-26-T-4092 and response deadline of August 6, 2026. Fast Pay is not applicable, and APEX Accelerators are available to support businesses seeking government contracting assistance.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE