ERYTHROMYCIN OPHTHALMI

ERYTHROMYCIN OPHTHALMIC OINTMENT
ERYTHROMYCIN OPHTHALMIC OINTMENT,USP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
RX ONLY, STERILE
.
ROUTE: OPHTHALMIC
DOSE FORM: OINTMENT (GRAM)
STRENGTH: 5 MG/GRAM (0.5 %)
.
EACH GRAM CONTAINS ERYTHROMYCIN USP 5 MG IN A STERILE OPHTHALMIC BASE OF
MINERAL OIL AND WHITE PETROLATUM.
SPE2DP-26-T-4260
SECTION B
.
CONSISTS OF SINGLE DOSE TUBES WITH AN OPHTHALMIC TIP
.
TUBE VOLUME: 3.5 GRAMS
.
UNIT OF ISSUE IS A PACKAGE CONTAINING 24 EACH (TUBES).
.
TOTAL SHELF LIFE IS 36 MONTHS.
.
THERE SHALL BE A MINIMUM OF 31 MONTHS OF REMAINING SHELF LIFE
AT THE TIME OF RECEIPT BY THE FIRST GOVERNMENT ACTIVITY.
.
STORE AT CONTROLLED ROOM TEMPERATURE 15°30°C (59°-86°F)
.
AVOID EXCESSIVE HEAT AND PROTECT FROM FREEZING.
.
LABELING AND MARKING MUST IN ACCORDANCE WITH
MEDICAL MARKING STANDARD NO. 1A DATED 4 FEBRUARY 2013
.
1/28/2016
.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
1 PG = 24 EA RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
PADAGIS US LLC 9MGE4 P/N NDC00574-4024-39
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017453637 0001 PG 1.000
NSN/MATERIAL:6505011897090
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
SPE2DP-26-T-4260
SECTION B
PR: 7017453637 PRLI: 0001 CONT’D
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
MARKFOR
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
M/F: (TCN) W91KBP61900012
RDD: 204
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/14/2026
SPE2DP-26-T-4260 NSN/Part Number: 6505-01-189-7090 Quantity: 1 PG Purchase Request: 7017453637QTY: 1 Delivery: 20 days ADO