Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

ESD/EMI Protective Packaging Supply

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials compliant with MIL-PRF-81705 standards, sourced exclusively from manufacturers listed on the QPL-81705. These materials are required to meet strict defense-grade specifications for safeguarding sensitive electronic components from static and electromagnetic threats during handling, storage, and transportation. The procurement is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance centered at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 3, 2026, and responses must be submitted by August 11, 2026, with the procurement categorized under NAICS code 326199 for other plastic product manufacturing. Only verified QPL-81705 suppliers are eligible to participate, ensuring all delivered packaging meets mandated military performance and quality benchmarks.

General Info

Supply MIL-PRF-81705-compliant ESD/EMI packaging from QPL-81705 vendors for DoD at New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of DOD-qualified electrostatic discharge and electromagnetic interference protective packaging materials per MIL-PRF-81705 from QPL-81705-listed manufacturers.

Similar Contracts

Same NAICS industry code

PLASTIC MOLDING KIT

Solicitation # SPE8E5-26-T-3760

The contract pertains to the procurement of a Plastic Molding Kit with NSN 9330-01-481-4339 and part number FOAM,FRL 6706, under solicitation SPE8E5-26-T-3760, issued by the Defense Logistics Agency Distribution Oklahoma City. The item is classified as a Critical Application Item with a Type II shelf life of six months, extendable, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating shelf life code 33. Packaging must avoid plastics as wrapping, cushioning, or dunnage where possible, and palletization must adhere to DLA requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances expected unless otherwise stated. The contract specifies delivery of one kilogram within five days FOB origin, with inspection and acceptance occurring at destination, and prohibits parcel post shipping—requiring traceable freight methods only. The delivery address is Tinker Air Force Base, Oklahoma, with specific marking, packaging, and hazardous material handling instructions under IP025. The purchase request number is 7017719797, and the required delivery date is August 3, 2026.

DLA DIST OKC KO CP

POSTED

about 9 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE8E5-26-T-3769

The item is an observation window with NSN 0001S00000052, quantity of 750 units, under purchase request 7017746467QTY, with a delivery requirement of 425 days after contract award. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons—whether inside the United States or overseas—is prohibited without prior written authorization from the Department of State or the Department of Commerce. This restriction applies to foreign national employees and foreign subsidiaries of U.S. companies, and DFARS 252.225-7048 governs the handling of this controlled information. Only DLA contractors who hold an active US/Canada Joint Certification Program certification, have completed the required DOD training on export-controlled data, and have successfully submitted and been approved via the DLA Export-Controlled Technical Data Questionnaire may access the technical data. The solicitation, identified as SPE8E5-26-T-3769, was posted on August 4, 2026, with responses due by August 17, 2026, and is classified under NAICS code 326199. Performance is required at Hill AFB, Utah, with the primary point of contact being Khue Nguyen of the Department of Defense, Depot Hill, reachable via email and phone provided.

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-914X

The contract involves the procurement of 17 units of BUTTON, PLUG with NSN 5340-01-156-8935 under solicitation SPE7L1-26-T-914X, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the acquisition scale. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed. Documentation for source approval is mandatory, and the technical data associated with this item is classified under export control regulations—either ITAR or EAR—restricting disclosure to foreign persons, including those within the United States, without prior authorization. Only contractors approved under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire, may access this controlled data. Delivery is due within 118 days of award, with performance taking place in San Diego, California. The solicitation closed on August 17, 2026, and primary point of contact is Brandon Pesicek, reachable via email or phone provided.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Supply of Watering System ComponentsThe contract calls for the supply of 192 polysulfone water bottles equipped with silicone rings and 192 grey bottle caps featuring seal gasket assemblies, specifically designed for use in rodent IVC systems. These components are critical for maintaining sterile and leak-proof watering environments in laboratory animal housing, ensuring proper function and animal welfare. The materials specified—polysulfone for durability and chemical resistance and silicone for superior sealing—reflect the technical demands of biologically sensitive settings. The solicitation is classified as a subcontract under NAICS code 326199, which covers other rubber product manufacturing, and is issued by the Department of Veterans Affairs through its Rpo East (36C24E) office. The opportunity was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time. No set-aside provisions or geographic performance details are specified, and no point of contact information is provided in the contract data. Interested parties must submit proposals through the SAM.gov portal using the provided UI link before the deadline.

Rpo East (36C24E)

POSTED

about 14 hours ago

DEADLINE

Roofing Manufacturer and Warranty ProviderThe contract requires the provider to supply a manufacturer-approved 20-year No Dollar Limit warranty for a comprehensive roofing system, ensuring full coverage for all aspects including design validation, material compliance, and installer certification. This warranty must be issued by the roofing manufacturer and must not impose any financial caps on repairs or replacements over the full two-decade term, guaranteeing long-term protection for the roofing installation at the Ottumwa Job Corps facility. The solicitation is classified as a subcontract under the Small Business Administration set-aside program, reserved exclusively for small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The NAICS code 326199 identifies the scope as other plastics product manufacturing, indicating the roofing materials involved may be synthetic or polymer-based. Proposals must be submitted by August 20, 2026, and performance is tied to the Ottumwa Job Corps location in Iowa, with eligibility restricted to certified small business entities meeting the specified SBA designations.

Ottumwa Job Corps

POSTED

about 22 hours ago

DEADLINE

Roof Insulation and Cover Board SupplyThe contract requires the supply of tapered polyisocyanurate insulation and high-density cover board for a new roofing system at the Ottumwa Job Corps facility, ensuring full compliance with ASTM standards and manufacturer specifications for thermal performance and code requirements. The materials must be carefully selected to meet rigorous energy efficiency and durability benchmarks necessary for long-term roof system integrity and compliance with building codes. This is a subcontract designated under the SBA’s small business set-aside program, available to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The NAICS code 326199 classifies the work under Other Plastics Product Manufacturing, reflecting the specialized nature of the insulation and board materials. The solicitation was posted on August 4, 2026, with responses due by August 20, 2026, and performance is expected to take place at the Ottumwa Job Corps location in Iowa.

Ottumwa Job Corps

POSTED

about 22 hours ago

DEADLINE

Supply of Sterile Sample Collection VesselsThe Mississippi Department of Health is seeking qualified suppliers to provide sterile, pre-filled plastic vessels and associated transfer devices for the collection and transport of water samples. The contract is structured as a subcontract and is open for bidding until August 24, 2026, with the solicitation posted on August 3, 2026. The equipment must meet strict sterility standards to ensure sample integrity throughout the collection, storage, and transport process. The North American Industry Classification System code 326199 indicates that the products fall under other plastic product manufacturing, emphasizing the specialized nature of the items required. Performance of the work is expected to support state-level environmental and public health monitoring programs, though the specific locations for sample collection and delivery are not detailed. Bidders must ensure their products comply with all relevant regulatory and safety requirements for medical and environmental sampling applications.

MS DEPT of HEALTH

POSTED

DEADLINE

Sterile Packaging and Sealing SupplyThe contract involves the supply of sterile barrier packaging materials, including peelable pouches and sealed bags, designed to preserve sterility throughout transport and storage for medical and surgical applications. These materials are critical to ensuring that sterile instruments and supplies remain contamination-free from the point of packaging through to clinical use. The solicitation is issued as a subcontract under the NAICS code 326199 for other plastic products and is managed by the Department of Defense through its Medical Supply Chain MD Surg FSF office. Performance is required at a designated location in San Antonio, Texas, with a submission deadline of August 10, 2026. The packaging solutions must meet stringent regulatory and quality standards to support defense medical operations, and vendors are expected to demonstrate capability in producing consistent, reliable sterile packaging that complies with all relevant federal and industry specifications.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract seeks qualified suppliers to provide ESD and EMI protective packaging materials including barrier bags and containers that meet military performance standards, ensuring protection for sensitive electronic components during storage and transit. All submitted products must comply with requisite military specifications and be suitable for use in defense-related applications. The procurement is structured as a subcontract under the Department of Defense through the Maritime Supply Chain, with performance required at Robins AFB, Georgia, 31098-1887. The NAICS code 326199 indicates the categorization under other plastics product manufacturing, aligning the scope with specialized plastic packaging production. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with all submissions expected through the DIBBS platform referenced in the contract details.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Industrial Spectacles Manufacturing and SupplyThe contract pertains to the manufacture and supply of industrial-grade spectacles identified by NSN 4240-01-701-2897 and part number CH5201, ensuring full compliance with Defense Logistics Agency technical specifications. The product must be produced and packaged in accordance with stringent military standards, including proper labeling and packaging requirements to meet logistical and operational demands. This is a subcontract opportunity issued under the NAICS code 326199, which covers other plastic product manufacturing, and is tied to the Department of Defense through the Defense Logistics Agency. Performance is required at the designated location of Lewis McChord, Washington, with a zip code of 98433-0000. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, indicating a short turnaround for interested parties to submit proposals. The contract type is explicitly labeled as a subcontract, meaning it is not a direct award but rather an opportunity for suppliers to bid on work that may be part of a larger prime contractor’s fulfillment effort. There is no set-aside designation provided, suggesting the opportunity is open to all eligible contractors regardless of small business status or other classifications. All submissions must align with DLA’s technical and procedural requirements for defense-grade protective eyewear, and interested parties can access further details via the provided DIBBS portal link.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Preformed Packing MaterialsThe contract mandates the supply of 88 units of preformed packing materials as a commercial item under CLIN 0001, specifically for use within defense logistics operations. These materials must fully comply with all applicable military and federal labeling standards to ensure proper identification, handling, and integration into the Department of Defense’s supply chain. The requirement is part of a subcontract under the NAICS code 326199, indicating the work involves other rubber product manufacturing. Performance is to be carried out at Hill AFB with a zip code of 84056-5734, confirming the designated delivery location. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the contract is managed by the Land Supplier Operations Vehicle Support organization within the Department of Defense.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Biohazard Disposal Bag SupplyThe contract calls for the supply of heavy-duty, puncture-resistant biohazard disposal bags in either red or orange color, each packaged in units of 200 bags per box, designed to meet all applicable federal safety and regulatory standards for the containment and disposal of infectious medical waste. The bags must be certified safe for commercial shipping and engineered to withstand rigorous handling during transport and storage, ensuring no leakage or compromise of containment under normal and adverse conditions. Compliance with federal guidelines is non-negotiable, and the product must be capable of integration into existing medical waste handling systems across Department of Defense facilities. This is a subcontract under the NAICS code 326199 for other plastic product manufacturing, issued by the Department of Defense through the Medical Supply Chain FSH. The solicitation was posted on August 3, 2026, with responses due by August 10, 2026, and no set-aside provisions apply. The place of performance and point of contact details are unspecified, but all deliveries must align with the Department of Defense’s logistics requirements. Interested parties can access full solicitation details via the provided DIBBS link, and bidders are expected to demonstrate product compliance, packaging integrity, and ability to meet volume demands without disruption to federal medical waste disposal operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-367E

This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 9 hours ago

DEADLINE

CONNECTOR BODY, RECE

Solicitation # SPE7M5-26-T-367P

This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.

Electronic Connector Manufacturing

POSTED

about 9 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367F

The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.

Electronic Connector Manufacturing

POSTED

about 9 hours ago

DEADLINE

RADOME, POLARIZER

Solicitation # SPE7M5-26-Q-0829

The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-367K

The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-367D

This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

SEMICONDUCTOR DEVICE, T

Solicitation # SPE7M5-26-T-366Y

The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.

Semiconductor and Related Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367G

This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.

Current-Carrying Wiring Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-Q-0830

The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.

Electronic Connector Manufacturing

POSTED

about 9 hours ago

DEADLINE

CLAMP, CABLE, ELECTRI

Solicitation # SPE7M5-26-T-366W

The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.

Other Building Material Dealers

POSTED

about 9 hours ago

DEADLINE

SWITCH, SEQUENCING

Solicitation # SPE7M5-26-T-367L

This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-26-T-366U

This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 9 hours ago

DEADLINE