Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

ETD System Hardware and Firmware Integration

Active

Federal

Response Deadline04/30/2027, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The ETD System Hardware and Firmware Integration subcontract focuses on providing and modifying hardware and firmware components for equipment manufacturers seeking qualification for the TSA ETD QPL. The scope of work includes the development of hardware Configuration Items, the versioning of firmware and software for reconstruction and inspection components, and the calibration of system parameters to meet specific environmental requirements according to TSA DS 5.0, 6.2, or 6.3 standards. Managed under the Transportation Security Administration within the Department of Homeland Security, the project requires the delivery of a fully functional ETD system prepared for official TSA testing. The opportunity is categorized under NAICS code 334511, with a response deadline set for April 30, 2027.

General Info

Subcontract for ETD hardware and firmware integration for TSA QPL qualification by 2027.

Agency

Department Of Homeland Security → Transportation Security AdministrationView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 70T04026QPL7672ETD001.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Explosive Trace Detection (ETD) Qualified Products List (QPL)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineApr 30

Submission deadline

Response Deadline

04/30/2027, 04:00:00 PM UTCin 8 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Transportation Security Administration

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Transportation Security Administration

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and modifies hardware and firmware components for equipment manufacturers qualifying for the TSA ETD QPL. Develops hardware Configuration Items (CIs), versions firmware and software including reconstruction and inspection components, and calibrates system parameters for specific environments per TSA DS 5.0, 6.2, or 6.3. Delivers a functional ETD system ready for TSA testing.

Similar Contracts

Same NAICS industry code

Supply of Indicator Lights (NSN 6210015282958)

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-411K

This contract, identified as SPE4A5-26-T-411K, is a solicitation from the Department of Defense for the procurement of two units of a critical application item, part number 792-6221-001 by Rockwell Collins, Inc. The delivery is set for 171 days after the order, with a required delivery date of May 10, 2027, and a need ship date of March 8, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for cybersecurity maturity (CMMC Level 2), covered defense information, and quality conformance inspections. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. Because the material is classified as overhauled, a certification must be provided with each delivered unit.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-466Z

This contract is for the procurement of two gas probes, identified by NSN 6665-12-400-0688 and part number 6809190 from Drager Safety AG Co. KGAA. The delivery is required within 20 days after the order, with a required delivery date of September 4, 2026. Shipping is designated as FOB Origin and must be sent via traceable means to Malmstrom AFB in Montana. The items are classified as Type I with a non-extendable shelf life of 12 months. Compliance with DLA packaging requirements and MIL-STD-129 marking is mandatory, though the manufacturer's metal container is permissible if it includes the part number, manufacturer name, and lot markings. Additionally, the contractor must ensure no Class I ozone-depleting chemicals are used and must provide a Safety Data Sheet and OSHA hazard communication label if the item is determined to be a hazardous material.

ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

CANISTER ASSEMBLY, SUCT

Solicitation # SPE2DS-26-T-413N

This contract is a solicitation for the procurement of 12 disposable surgical suction canister assemblies, identified by NSN 6515-01-620-9271. Each unit must be a 300ml plastic canister featuring an internal filter, blue connection fittings, and three feet of tubing. The items are regulated by the FDA, and bidders are required to provide the source and specific part number being supplied. Delivery is required within 20 days after the order is placed, with the place of performance located at Mountain Home AFB. Packaging must adhere to commercial standards, ensuring each unit is in a sealed container to prevent damage, and all materials must be marked according to Medical Marking Standard No. 1. The procurement is managed by the Department of Defense Medical Supply Chain under solicitation number SPE2DS-26-T-413N.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

NEEDLE, HYPODERMIC

Solicitation # SPE2DS-26-T-412T

This contract is for the procurement of one package of 100 sterile, disposable hypodermic needles. The needles are 27G 1.5 inches, siliconized, and feature autoground points with grey hubs. They are constructed from 18/8 stainless steel and must be latex-free, non-toxic, and non-pyrogenic. The items are FDA regulated and must be delivered to Camp Pendleton, California, within five days of order. The product has a total shelf life of 60 months, with a minimum of 51 months remaining upon receipt by the government. Packaging must meet commercial standards and be sealed in containers that protect against damage, with marking adhering to Medical Marking Standard No. 1. The contract specifies a zero percent quantity variance and requires delivery FOB destination.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

SUTURE, ABSORBABLE, SURG

Solicitation # SPE2DS-26-T-412J

This contract is for the procurement of absorbable surgical sutures, specifically plain size 6-0 with a length of 18 inches, under solicitation number SPE2DS-26-T-412J. The order consists of two boxes, with each box containing 12 units. The items must be delivered within five days after the order is placed to the designated location in San Antonio, Texas. The sutures must have a shelf life of 60 months, and no more than nine months may have passed from the date of manufacture to the date of delivery. Packaging must meet commercial standards and be sealed in containers that protect the contents from damage. All materials must be marked according to Medical Marking Standard No. 1, and labels must clearly include the NSN, manufacturer and CAGE code, manufacture and expiration dates, and the contract or lot number.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

GEAR AND SHAFT ASSE

Solicitation # SPE4A7-26-T-722V

This contract is for the procurement of 14 units of Gear and Shaft Assemblies, identified by NSN 5865007369030 and part number RB31821 from MAS Components and Coatings, LLC. The items are classified as commercial critical application items and must adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. The agreement mandates compliance with the DLA Master List of Technical and Quality Requirements, CMMC Level 2 self-assessment for cybersecurity, and specific configuration change management protocols. Delivery is set for 171 days after order, with a required delivery date of February 3, 2027, and a need ship date of March 8, 2027. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

CATHETER, URETHRAL

Solicitation # SPE2DS-26-T-411D

This contract is for the procurement of silicone-elastomer coated latex Foley 3-way urethral catheters, size 20FR with a 30 ml balloon. The order consists of one package containing 12 units, identified by NSN 6515-01-596-1578 and part number DYND11802 from Medline Industries, LP. Delivery is required within 20 days after the order, with a final delivery date of September 10, 2026, shipped FOB destination to the USNS Comfort. The items must have a non-extendable shelf life of 36 months, with no more than 5 months elapsed from the date of manufacture to the date of government delivery. Packaging must be commercial grade, utilizing sealed unit containers and suitable exterior shipping containers to prevent damage. All materials must be marked according to Medical Marking Standard No. 1, and containers must clearly display the lot control number and manufacture date.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

SUPPLEMENTARY EQUIPMEN

Solicitation # SPE4A7-26-T-725F

This contract, identified as SPE4A7-26-T-725F, is for the procurement of nine units of supplementary electronic equipment, specifically identified as a commercial off the shelf item with NSN 5895015385830. The agreement requires compliance with CMMC Level 2 self-assessment and the protection of covered defense information. Technical and quality requirements are governed by the DLA Master List, and the items must meet NAVAIR aircraft launch and recovery equipment traceability standards. Key delivery terms specify a delivery window of 410 days, with a required delivery date of November 24, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. The contract mandates strict adherence to MIL-STD-129 for marking and RP001 for packaging. Additionally, there is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

CABLE, INVASIVE BLOOD P

Solicitation # SPE2DS-26-T-413J

This contract is for the procurement of one invasive blood pressure transducer interface cable featuring a right-angle design and an Edwards connector for oval transducers. The item is identified by NSN 6515016150921 and is regulated by the FDA, requiring bidders to specify the source and part number being supplied. Delivery is required within 20 days after receipt of order to Ellsworth AFB, South Dakota, with shipping to be handled via the fastest traceable means. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards such as ASTM D3951 and Medical Marking Standard No. 1. All units must be delivered in sealed containers to prevent damage and must comply with DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-414L

This contract is for the procurement of 144 boxes of i-gel O2 Resuscitation Packs, size 5 adult large, under solicitation number SPE2DS-26-T-414L. Each unit consists of a supraglottic airway with a removable inner tray, a lubricant sachet, and a support strap, all housed in a sterile, rigid, clear pack with a color-coded hook ring for easy size identification. The order specifies a unit of issue of six pieces per box, with a total delivery requirement of 144 boxes to be completed within 84 days after the order is placed. The items must adhere to strict quality and shelf-life standards, requiring a 36-month non-extendable shelf life with no more than five months elapsed from the date of manufacture to the date of government delivery. Packaging must be commercial grade and capable of protecting contents during transit and storage, with all marking and labeling complying with Medical Marking Standard No. 1. Bidders are required to specify the source and part number for NSN 6515-01-621-2401 and must follow DLA master technical and quality requirements.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

CATHETERIZATION KIT, SU

Solicitation # SPE2DS-26-T-414C

This contract is for the procurement of sterile, single-use, disposable suprapubic puncture catheterization kits. Each kit is 14 French and consists of a needle introducer, a 12FR Bardex Lubricath Foley catheter, a Council catheter stylet, a urine collection bag, and a pre-filled inflation syringe. The items are supplied in packages of six and have a total shelf life of 36 months, with a requirement that at least 30 months of shelf life remain upon receipt by the government. The procurement specifies commercial packaging and packing standards, requiring sealed unit containers and exterior shipping containers that ensure safe delivery. All materials must be marked according to Medical Marking Standard No. 1. Delivery is set as FOB Destination with a required delivery timeframe of five days. Shipments are directed to locations including Camp Pendleton, California, and the USNS Comfort.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Transportation Security Administration

Same awarding agency

Buy American Act (BAA) & Trade Agreement ComplianceThis subcontract with the Transportation Security Administration under the Department of Homeland Security focuses on Buy American Act and Trade Agreement compliance. The primary objective is to perform compliance audits and certifications for equipment manufacturers pursuing TSA QPL qualification. This involves verifying adherence to FAR 52.225-1 through 52.225-12, analyzing supply chains for Trade Agreement and EU participation, and utilizing specialized supply chain management software to ensure all BAA and TAA standards are met. The contractor is responsible for delivering signed BAA and TAA certificates along with detailed compliance reports. This effort falls under NAICS code 541611, with a response deadline of April 30, 2027.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Certification Data Package (CDP) / Qualification Data Package (QDP) DevelopmentThis subcontract with the Transportation Security Administration under the Department of Homeland Security focuses on providing technical documentation and engineering analysis for equipment manufacturers pursuing Explosive Trace Detection qualification. The primary objective is the development and delivery of Certification Data Packages, Qualification Data Packages, and Master Configuration Item Lists. The scope of work includes mapping European standards to their United States equivalents and documenting system parameters in accordance with the Qualification Management Plan and TSA Detection Standards 5.0, 6.2, or 6.3. This effort falls under NAICS code 541330, with a response deadline set for April 30, 2027.

Engineering Services

POSTED

DEADLINE

Explosive Trace Detection (ETD) Qualified Products List (QPL)

Solicitation # 70T04026QPL7672ETD001

The Transportation Security Administration is establishing a qualification process under FAR 9.202 to add vendors to the Explosive Trace Detection (ETD) Qualified Products List (QPL). This process allows Original Equipment Manufacturers to submit Certification Data Packages (CDP) or Qualification Data Packages (QDP) for systems that meet specific TSA Detection Standards (DS 5.0, 6.2, or 6.3) and the ETD Functional Requirements Document Version 2.0. Inclusion on the QPL requires successful completion of a multi-step evaluation, including a review of system architecture, cybersecurity documentation, and technical manuals, followed by qualification testing. TSA funding for this testing is limited to the first five applicants whose QDPs are accepted. The process involves strict security and vetting requirements, including the execution of TSA Form 2815 for access to Sensitive Security Information (SSI) and subsequent use of DHS Form 11000-6 post-award. Applicants must provide CAGE codes, Unique Entity Identifiers, and detailed personnel information for vetting. Qualified systems are subject to a Cyber Vulnerability Penetration Assessment and must comply with the Buy American Act or applicable Trade Agreements. While successful qualification allows a product to be listed on the QPL, it does not guarantee a future contract award. The QPL remains open until closed by the TSA, with the current response deadline set for April 30, 2027.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Certification Testing and Technical DocumentationThis subcontract for Certification Testing and Technical Documentation supports the Transportation Security Administration within the Department of Homeland Security. The primary objective is to manage qualification data packages and execute certification testing for BLS systems to assist manufacturers in achieving TSA QPL certification. This process involves the preparation of Qualification Data Packages and Certification Data Packages, alongside the coordination of Qualification and Certification Testing in accordance with the Qualification Management Plan. Key deliverables for this engagement include the Certification Data Package, the System Evaluation Report, and the Test Readiness Notification. The opportunity is categorized under NAICS code 541330, with a response deadline of October 15, 2026.

Engineering Services

POSTED

DEADLINE

in about 1 month

Cybersecurity and Penetration TestingThis subcontract focuses on providing cybersecurity and penetration testing services for BLS systems to support manufacturers pursuing TSA QPL certification. The primary objective is to conduct Cooperative Vulnerability Penetration Assessments using specialized tools to verify that systems meet the rigorous security standards established by the Transportation Security Administration and the Department of Homeland Security. The selected provider will be responsible for delivering comprehensive CVPA reports and detailed vulnerability remediation documentation. This opportunity is managed under NAICS code 541512, with a response deadline of October 15, 2026.

Computer Systems Design Services

POSTED

DEADLINE

in about 1 month

BLS Software and Firmware DevelopmentThis subcontract for the Transportation Security Administration involves the development of operating systems, reconstruction software, and inspection software for BLS systems to assist manufacturers in achieving TSA QPL certification. The scope of work includes coding software and firmware Configuration Items and creating a Graphical User Interface with adjustable parameters, all while adhering to the Master Configuration Item List and Configuration Management Plan. The project requires the delivery of specific software and firmware versions along with a complete inventory of Configuration Items. This opportunity was posted on August 13, 2026, with a response deadline of October 15, 2026, falling under NAICS code 541511.

Custom Computer Programming Services

POSTED

DEADLINE

in about 1 month

Bottle Liquid Scanner (BLS) Hardware IntegrationThis subcontract with the Transportation Security Administration under the Department of Homeland Security focuses on the supply and integration of physical components for Bottle Liquid Scanner systems. The primary objective is to provide manufacturers with the necessary hardware to achieve certification on the TSA Qualified Products List. This involves the manufacture of scanner hardware and the assembly of systems using specialized sensors and chassis to ensure compliance with Functional Requirements Documents and Detection Standards. The contractor is responsible for delivering a fully functional hardware System Under Test. This opportunity, categorized under NAICS code 334510, was posted on August 13, 2026, with a response deadline of October 15, 2026.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

in about 1 month

Security Clearance and Facility ManagementThe Transportation Security Administration, under the Department of Homeland Security, is seeking a subcontractor for Security Clearance and Facility Management. This contract focuses on providing facility and personnel clearances for manufacturers pursuing TSA QPL certification to handle sensitive security information. The selected provider will manage Facility Clearance Levels and Personnel Security Clearances in strict accordance with the National Industrial Security Program and NISPOM, ensuring that all project personnel are properly validated. Key responsibilities include the maintenance of secure facilities capable of handling sensitive security information and classified national security information. This opportunity is categorized under NAICS code 561611, with a response deadline of October 15, 2026.

Investigation and Personal Background Check Services

POSTED

DEADLINE

in about 1 month

Bottle Liquid Scanner (BLS) Qualified Products List (QPL)

Solicitation # 70T04026QPL7672BLS001

The Transportation Security Administration is establishing a qualification process under FAR 9.202 to add vendors to the Bottle Liquid Scanner (BLS) Qualified Products List (QPL). This initiative aims to identify and certify devices capable of detecting hazardous and prohibited substances in liquids, aerosols, and gels within sealed containers to increase competition for future procurements. To be eligible, applicants must meet specific entrance criteria, including adherence to the BLS Functional Requirements Document v2.95 and Detection Standard 2.3, as well as compliance with IT security and Security Technology Integrated Program compatibility requirements. Successful placement on the QPL does not guarantee a contract award, as future procurements will be handled via competition or sole source justification as requirements arise. The qualification process involves the submission of Certification Data Packages (CDP) and Qualification Data Packages (QDP) on physical thumb drives to designated TSA officials. Applicants must undergo a rigorous evaluation process, including internal system testing at their own cost and government Certification Testing (CERT) at the Transportation Security Laboratory, where three proposed systems must be submitted. Due to the sensitive nature of the technology, participants must comply with strict security protocols, including the execution of TSA Form 2815 Non-Disclosure Agreements, passing Security Threat Assessments, and designating a Senior Official to manage Sensitive Security Information. Additionally, all submitted systems must comply with the Buy American Act and applicable Trade Agreements.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

Biometric Authentication SystemsThis subcontract for the Transportation Security Administration involves the supply and installation of biometric authentication technologies to support identity verification projects. The scope of work includes integrating biometric scanners and software, linking databases for verification, and establishing seamless authentication workflows using fingerprint, facial, and iris hardware. The project is based in Springfield and falls under NAICS code 541512. Due to the handling of sensitive biometric data, all personnel are required to maintain necessary security clearances to ensure the delivery of a fully operational biometric authentication system.

Computer Systems Design Services

POSTED

about 2 months ago

DEADLINE

Zero Trust & Cybersecurity ImplementationThe Zero Trust and Cybersecurity Implementation subcontract is awarded by the Transportation Security Administration under the Department of Homeland Security to manage cybersecurity frameworks for prime contractors on TSA infrastructure projects. The primary objective is to deliver a hardened, Zero Trust-compliant security architecture through the deployment of security controls, system hardening based on internal TSA standards, and the execution of comprehensive cybersecurity audits. This engagement requires the use of specialized Zero Trust architecture tools and monitoring software, and all involved personnel must possess high-level security clearances. The work is performed in Springfield, Virginia, under NAICS code 541519, focusing on the integration of advanced security protocols to protect critical infrastructure.

Other Computer Related Services

POSTED

about 2 months ago

DEADLINE

AI/ML Integration & DevelopmentThis subcontract for AI/ML Integration and Development supports the Transportation Security Administration within the Department of Homeland Security. The primary objective is to develop and integrate secure, explainable, and governable artificial intelligence and machine learning capabilities for prime contractors on TSA operations projects. This work involves designing AI/ML frameworks, building data processing pipelines, and integrating models into cloud and data environments in strict alignment with the DHS AI Strategy. The project requires personnel with appropriate security clearances to perform rigorous testing and deliver integrated AI/ML tools and models. Based in Springfield, Virginia, the contract falls under NAICS code 541511 and focuses on the delivery of high-level technical integration to enhance agency operations.

Custom Computer Programming Services

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS