This Pre-Solicitation opportunity was posted on August 5, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

EVO MA 15 SEM W/OXFORD EDS SYSTEMS

Closed

CPSC-Q-09-0158Federal

Submission Closed09/01/2009, 08:01:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

SLED

Hyperspectral Cameras with Benchtop Reflectance System

Solicitation # AG-RSCH-ITB-6625

Solicitation AG-RSCH-ITB-6625 is an Invitation to Bid issued by the Texas A&M AgriLife Procurement Office for the acquisition of Hyperspectral Cameras with Benchtop Reflectance System. The procurement is managed by the state of Texas, with the place of performance located within Texas. Kaitlyn Vetzel serves as the primary point of contact and buyer for this requirement. Interested vendors must register and submit their bids electronically through the AggieBid portal under the Business Opportunities section. The deadline for bid submission is November 6, 2026, at 2:00 p.m. central time. While the solicitation notice provides the general scope of work, all detailed technical specifications and documentation are hosted exclusively on the AggieBid site.

Texas A&M AgriLife Research

POSTED

DEADLINE

Visible and Near Infrared (VNIR) Hyperspectral Camera & Benchtop System SupplierThis subcontract through Texas A&M University involves the procurement of Visible and Near Infrared (VNIR) hyperspectral cameras and a benchtop reflecting system to support prime contractors on Texas A&M AgriLife Research projects. The scope of work includes the delivery of two hyperspectral cameras and a reflecting system equipped with SWIR components, ensuring all hardware is provided with comprehensive warranty coverage. The supplier is required to provide essential technical documentation, including detailed specifications, Accessibility Conformance Reports, and ECCN/Export Control documentation. This procurement falls under NAICS code 334516, with a response deadline set for November 6, 2026.

POSTED

DEADLINE

Hyperspectral Cameras with Benchtop Reflectance System

Solicitation # AG-RSCH-ITB-6625

Texas A&M AgriLife Research has issued solicitation AG-RSCH-ITB-6625 for the procurement of two hyperspectral cameras, including a Visible and Near Infrared (VNIR) model, and a benchtop reflecting system. This Invitation to Bid is open from October 23, 2026, with a response deadline of November 6, 2026, at 2:00 PM CST. The contract will be awarded based on best value criteria, evaluating factors such as purchase price, vendor reputation, quality of goods, delivery time, warranty coverage, and the vendor's past relationship with the agency. Bidders must provide unit price responses, full technical specifications, and detailed information regarding virtual training and estimated delivery timelines. Compliance with Texas Government Code section 669.003 and the agency's standard terms and conditions is required. Payment is set at Net 30 days following the later of a correct invoice receipt or the successful completion of training and agency acceptance. The procurement is governed by the laws of the State of Texas, and the primary point of contact for this action is Kaitlyn Vetzel.

POSTED

DEADLINE

High Performance Liquid Chromatography (HPLC) Systems SupplierThis subcontract agreement involves the supply of High Performance Liquid Chromatography (HPLC) systems for prime contractors working on Southern Regional College projects. The scope of work requires the delivery of three fully configured systems to the Portadown and Newry campuses, consisting of two standard HPLC systems and one specialized system equipped with a Nitrogen Generator and Mass Detector. The supplier is responsible for providing all necessary technical brochures and supporting documentation in accordance with the Specification Schedule. This procurement opportunity was posted on October 23, 2026, with a response deadline set for November 18, 2026.

Southern Regional College

POSTED

DEADLINE

ID 6637252 - DfE - SRC - High Performance Liquid Chromatography (HPLC)

Solicitation # ID 6637252

Southern Regional College is seeking a supplier for the supply, delivery, and commissioning of High Performance Liquid Chromatography (HPLC) equipment. The primary requirement includes two standard HPLC units for the Portadown and Newry campuses and one HPLC unit equipped with a Mass Detector and Nitrogen Generator Package for the Newry campus. The selected supplier must also manage the removal of legacy equipment, providing either trade-in value or ensuring safe and sustainable disposal. There is an option for the college to purchase one additional standard HPLC for the Armagh campus within 12 months of the initial commissioning, provided the supplier maintains the original tender pricing for that period. The contract is estimated at 242,000 GBP including VAT, with an initial performance period from February 26, 2027, to February 25, 2029, and the possibility of two 2-month extensions. This procurement is noted as particularly suitable for small and medium-sized enterprises. Award decisions will be based on a weighted scoring system consisting of 90% price and 10% quality, following a pass/fail evaluation of specification compliance and technical documentation. The submission deadline for this open procedure is November 18, 2026.

Southern Regional College

POSTED

DEADLINE

403B-27 Dynamic Shear Rheometer (DSR)

Solicitation # 403B-27

The Ohio Department of Transportation (ODOT) is seeking a one-time purchase of one new automatic Dynamic Shear Rheometer (DSR) for asphalt binder testing, specifically suggesting the Anton Paar SmartPave/MCR 73 model. The equipment must be air-cooled and comply with AASHTO T 315 and T 350 standards. The procurement includes the DSR unit, required software and licenses, three 25 mm lower testing plates, and two 8 mm lower testing plates. The winning vendor is responsible for shipping to Columbus, Ohio, as well as providing installation, training, and onsite calibration, including the necessary standard fluids. Additionally, the vendor must provide a separate trade-in credit for an existing Anton Paar SmartPave 101 DSR, serial number 80313953. To be considered responsive, bidders must submit their responses electronically via OhioBuys by the November 10, 2026, deadline. Requirements include providing documentation as an authorized dealer or distributor, specifying minimum computer requirements, and ensuring all unit prices are entered accurately without the use of ditto marks or arrows. The contract is awarded on an F.O.B. Destination basis, meaning the vendor bears the risk and cost of transportation. Payment is processed via electronic funds transfer or state payment methods, with terms set at 30 calendar days following the receipt of a proper invoice. Bidders must also certify compliance with the Buy American Act and provide registration with the Ohio Secretary of State or proof of exemption within seven business days of the award.

Dept Of Transportation

POSTED

DEADLINE

Supply of CMOS Camera and LED Control ElectronicsThis subcontract opportunity is for the supply of digital imaging cameras and electronic drivers to support prime contractors on projects for the Naval Research Laboratory within the Department of Defense. The required deliverables include Zelux 1.6 MP Monochrome CMOS Cameras featuring 1/4-20 taps and external triggers, along with corresponding LED drivers and all necessary cabling. To be eligible for award, the provider must be an original equipment manufacturer or an authorized reseller. The contract is designated as a total Small Business Set Aside under NAICS code 334516, with performance taking place in Washington. Interested parties must submit their responses by October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Supply of Specialized Optical ElementsThis subcontract opportunity is for the supply of specialized precision optical components to support prime contractors on projects for the Naval Research Laboratory under the Department of Defense. The required deliverables include Glan-Taylor Polarizers with a 5 mm clear aperture and 650 to 1050 nm coating, quarter and half wave plates, dielectric-coated concave mirrors, and aspheric condenser lenses featuring a 25 mm diameter, 20.1 mm focal length, 0.60 numerical aperture, and an anti-reflective coating for 350 to 700 nm. Eligible bidders must be an original equipment manufacturer or an authorized reseller. This is a total small business set-aside opportunity under NAICS code 334516, with performance taking place in Washington. The solicitation was posted on October 23, 2026, and requires a response by October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Supply of Single Photon Detection ModulesThis subcontract, issued by the Department of Defense for the Naval Research Laboratory, involves the supply of four high-precision Single Photon Detection Modules. These modules must feature a wavelength range of 350 to 1100 nm and a 500 µm active area. To ensure the validity of warranty and service agreements, the provider must be an original equipment manufacturer or an authorized reseller. The opportunity is designated as a total Small Business Set Aside under NAICS code 334516, with performance taking place in Washington. Interested parties must have submitted their responses by the deadline of October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

FS5 Analyzer System SupplyThis subcontract, issued by the Department of Defense under the W6QM Micc-Ft Drum agency, requires the supply of a complete fiber analysis system for prime contractors working on US Army DEVCOM projects. The primary requirement is the delivery of a Valmet FS5 Analyzer or an equivalent system that meets all specified physical and functional characteristics. The delivery must include the main analyzer unit, back-up image media, sample beakers, a measurement accuracy verification kit, a manual defibrator, and a water treatment unit equipped with a filter, regulator, and deaeration system. The selected provider is responsible for delivering the FS5 Analyzer system fully assembled and thoroughly documented. This procurement falls under NAICS code 334516 and is associated with a performance location in zip code 07806. Interested parties must adhere to the response deadline of October 30, 2026.

POSTED

DEADLINE

Photon Detector Modules

Solicitation # N00173-27-Q-1301391744

The Naval Research Laboratory is soliciting quotations for the procurement of Photon Detector Modules and associated precision optical hardware under solicitation N00173-27-Q-1301391744. This is a Total Small Business Set-Aside conducted as a Firm-Fixed-Price contract under NAICS code 334516 and PSC 6640. The requirement is for new equipment only, and offerors must be an Original Equipment Manufacturer (OEM), an authorized dealer, distributor, or reseller to ensure OEM warranty and service are maintained. The procurement follows a brand name or equal specification, and the government will award the contract based on the Lowest Price Technically Acceptable (LPTA) evaluation method. The scope of work includes the acquisition of four Single Photon Detection Modules and a comprehensive list of specialized optical components, including Glan-Taylor polarizers, wave plates, dielectric-coated concave mirrors, aspheric condenser lenses, and various 30 mm cage system components such as rotation platforms and kinematic cubes. Additionally, the requirement includes a Zelux 1.6 MP Monochrome CMOS Camera, LED drivers, and associated cabling. All technical and price quotes must be submitted via email to the designated purchasing agent by the response deadline of October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Thermal Desorption System (TDS) SupplyThis subcontract involves the supply of specialized Thermal Desorption Systems for prime contractors supporting EPA OAR SACO laboratory projects. The scope of work includes the delivery of Gerstel TDS 3/CIS 4C Bundles and Gerstel TDS A2 systems, which must be compatible with Agilent 8890 GC and 5977 MS hardware. Required technical components include flow modulators, electronic pressure control, and liquid nitrogen cooling. The performance of this contract will take place in Ann Arbor, Michigan. Suppliers are required to provide the completed systems and all associated components, while ensuring the country of origin for the equipment is clearly identified. The solicitation was posted on October 23, 2026, with a response deadline of November 5, 2026.

Oar Nvfel Saco

POSTED

1 day ago

DEADLINE

in 12 days

General Info

Agency

N/A

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Consumer Product Safety Commission Laboratory Sciences Building 10901 Darnestown Road, GAITHERSBURG, MD, 20878, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 5

Presolicitation

Response DeadlineSep 1

Deadline has passed

Submission Closed

09/01/2009, 08:01:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Rudi A Murray-Johnson

contact@example.gov

+1 (555) 000-0000

Full Description

The U.S. Consumer Product Safety Commission (CPSC) intends to procure for an EVO MA15 Scanning Electron Microscope (SEM) with Oxford EDS System. The North American Industry Classification systems code is 334516 and small business size standard is 500 employees. The following are the specifications: The system shall include the ability to image multiple substrates such as wood, plastic, glass, metal, cloth, etc. over a range of voltages, magnifications, and pressures specified below. The SEM shall have secondary electron detection over the entire pressure range, and an electron backscatter detector. The detectors shall be capable of signal mixing. The SEM shall have an Oxford INCA 350 EDS system with x-act Analytical Drift Detector (ADD) capable of elemental identification and mapping. The electron beam source shall be a tungsten filament and the filament shall be mounted in a pre-centered cartridge. Newly installed filaments shall be treated and/or adjusted automatically through computer control. The vacuum system shall include a turbo molecular pump and any necessary additional roughing pump shall be oil free. The specimen chamber shall be capable of analyzing at least a six inch diameter specimen roughly three inches in height. The stage shall be a 5 axis motorized computer controlled eccentric stage. There shall be a chamber scope, a very low magnification electron beam mode, and software for automatic specimen navigation. The computer operating system shall be windows XP. The system shall include a Denton Desk V sputter coater with tilt and rotation feature. Any firm that is interested in receiving a copy of the package and/or believes it can provide the stated required equipment may obtain a full listing of the general and specific requirements on or before August 18, 2009. The quotation package may be released on August 21, 2009. Request for a written quotation shall be made via email to rjohnson@cpsc.gov. Telephone request shall not be accepted.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS