Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Expansion Joint, Pipe – Supply and Delivery

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the supply and delivery of 30 units of expansion joints for pipe with NSN 4730014540088, requiring full compliance with military standards for packaging, labeling, and transportation. All items must be delivered FOB origin, meaning the vendor is responsible for ensuring the goods are properly prepared and shipped to the designated destination, where final inspection will be conducted by the receiving authority. The place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the product will be received and inspected upon arrival. Issued under the NAICS code 332913, this subcontract is managed by the Fluid Handling Division within the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, limiting the window for vendor submissions to eleven days. While no specific set-aside designation or point of contact is provided, the requirement for military-compliant handling and the use of a federal shipping and inspection protocol underscores the necessity for strict adherence to defense logistics standards. Bidders must ensure all documentation and physical delivery meet the technical and procedural expectations associated with DoD procurement.

General Info

30 expansion joints delivered FOB origin to New Cumberland, PA, meeting DoD military standards.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 30 units of expansion joints for pipe (NSN: 4730014540088) with military-compliant packaging, labeling, and transportation. FOB origin with destination inspection.

Similar Contracts

Same NAICS industry code

Supply of Safety Relief Valve (Commercial Item)The contract involves the supply and delivery of a commercial safety relief valve identified by NSN 4820015278857, which includes all necessary packaging, labeling, and shipping arrangements. The item must be delivered under FOB Origin terms, meaning title and risk transfer to the buyer upon shipment from the seller’s location. The contract is categorized as a subcontract under the NAICS code 332913, indicating it relates to other fabrication and finishing activities for industrial machinery. The place of performance is specified as Tracy, California, with a zip code of 95304-5000, where the Defense Logistics Agency will receive the shipment. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The contract is accessed via the DIBBS portal and is structured to procure a commercial off-the-shelf item to meet operational safety requirements.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

COTS Gate Valve SupplyThe contract entails the manufacture and delivery of seven standard gate valves identified by NSN 4820016157986, with strict adherence to military and industry technical specifications. All valves must meet required quality and performance standards, and the supplier is responsible for proper packaging, labeling, and origin verification to ensure traceability and compliance with defense procurement protocols. The work is being performed under a subcontract issued by the Defense Logistics Agency, a division of the Department of Defense, and falls under NAICS code 332913 for other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and the place of performance and point of contact details are not specified, though the contract is accessible via the DIBBS system with the provided link.

Defense Logistics Agency

POSTED

DEADLINE

Pipe Elbow Manufacturing and SupplyThe contract requires the manufacture and supply of 22 pipe elbows to meet military specifications, including all necessary packaging, labeling, and delivery to DLA Anniston at ZIP code 36201-4199. The work must adhere to strict documentation protocols expected by the Department of Defense and is classified as a subcontract under NAICS code 332913. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and the contracting activity falls under LSO Combat Vehicles and Armament. All deliverables must be fully compliant with applicable military standards and accompanied by the required certifications and paperwork to ensure acceptance at the designated performance location.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

MIL-STD-129 Military Marking and LabelingAll contractors must apply durable military shipping labels in strict accordance with MIL-STD-129 standards, ensuring every package includes the National Stock Number, contract identification, and proper handling codes to guarantee full scannability and regulatory compliance throughout the defense supply chain. Labels must withstand environmental and physical stresses during transport and storage, maintaining legibility and machine-readability from origin to final destination at Tinker Air Force Base, Oklahoma, with a response deadline of July 31, 2026, under a subcontract classification governed by NAICS code 332913 and managed by the Department of Defense’s Maritime Supply Chain organization.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Valve Manufacturing – Nickel Alloy Stop Check ValvesThe contract awards the manufacture and delivery of 6,000 units of 6.00-inch nickel alloy stop check valves compliant with military specifications, encompassing all phases from material procurement to final assembly, rigorous testing, and comprehensive documentation. Production must adhere to ISO 9001:2015 quality management standards and is subject to government inspection protocols to ensure conformance with stringent defense requirements. The valves are constructed from nickel alloy, selected for durability and performance under demanding operational conditions, and each unit must meet exacting dimensional, functional, and material integrity criteria. The work falls under NAICS code 332913 for other fabricated metal product manufacturing and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. Though the specific location of performance is unspecified, the contract requires full compliance with federal acquisition standards and delivery timelines governed by defense supply chain protocols. All documentation, including test results, certificates of conformance, and material traceability records, must be submitted to satisfy audit and quality assurance obligations. The contract was posted on July 20, 2026, and is referenced under contract number SPE7M126P8903.

Defense Logistics Agency

POSTED

DEADLINE

Precision Elbow Fitting Supply (Marine Specification)The contract entails the manufacture or supply of 18 units of a 2-inch copper alloy 70/30 belled-end elbow fitting, standardized under NSN 4730016028851, with strict compliance to MSS SP-119, MIL-T-16420, and marine environmental specifications. These fittings are intended for demanding marine applications, requiring durable material composition and precision engineering to withstand harsh saltwater exposure and operational stresses. The work is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 332913 for other fabricated metal product manufacturing. The contract was posted on July 20, 2026, with no solicitation number listed and no set-aside provisions indicated. Performance location details are unspecified, and no point of contact is provided, suggesting the procurement may be managed through centralized DLA channels. The only available reference for further information is an online link tied to the contract award record within the DIBBS system, which can be used to retrieve official documentation or status updates. All units must meet the stated technical standards without exception to ensure compatibility and reliability in military marine systems.

Defense Logistics Agency

POSTED

DEADLINE

High-Pressure Check Valve Supply (NSN 4820-01-684-6568)The contract entails the supply of 575 high-pressure check valves that meet exact military specification standards, ensuring rigorous performance and reliability under demanding operational conditions. Each valve must be fully traceable, with comprehensive documentation supporting manufacturing origin, materials, and inspection records, and all units are subject to strict quality control inspections to guarantee compliance with the established technical requirements. The contract is issued under the National Stock Number 4820-01-684-6568 and falls under NAICS code 332913 for Other Fabricated Metal Product Manufacturing. It is structured as a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense to support critical defense infrastructure. Delivery is required to a government-designated location, though the precise site details are not specified, and the valves will be integrated into military systems requiring certified components. The solicitation was posted on July 20, 2026, and while no specific set-aside provisions or point of contact are provided, the contract emphasizes adherence to federal defense procurement protocols and full accountability throughout the supply chain. The official reference for award details is linked through the DIBBS website under contract number SPE7MC26P3139, indicating formal government oversight and procurement tracking.

Defense Logistics Agency

POSTED

DEADLINE

High-Pressure Check Valve SupplyThe contract involves the supply of two high-pressure check valves that must comply with military specifications, ensuring strict adherence to traceability, marking, and inspection standards. These valves are critical components requiring full documentation and quality control throughout manufacturing and delivery. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 332913 indicating classification within other fabricated metal product manufacturing. Delivery must be completed within 250 days from award, placing significant time pressure on production and testing phases to meet the required schedule. The performance location and point of contact details are not specified, but the contract is accessible through the DLA’s DIBBS system under solicitation reference SPE7M226P2905.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Ball Valve SupplyThe contract entails the supply and delivery of 53 units of a specific ball valve identified by NSN 4820-01-705-6503, manufactured to meet strict military specifications and associated documentation standards. This is a subcontract under the broader procurement efforts of the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 332913 indicating the nature of the industrial activity as Other Fabricated Metal Product Manufacturing. The contract was posted on July 20, 2026, and the performance location details are unspecified, suggesting the delivery point may be determined during execution. All units must comply with applicable military requirements, including testing, certification, and labeling protocols to ensure interoperability and reliability in defense operations. The procurement is tracked under contract number SPE7MC26P2696, with access available through the DIBBS platform for official recordkeeping and monitoring.

Defense Logistics Agency

POSTED

DEADLINE

Kit Packaging, Labeling, and Compliance ManagementThe contract entails the final assembly, packaging, and labeling of a complete water quality analysis kit, with strict adherence to military standards including MIL-STD-129 and MMS No. 1. All components must be accurately labeled with the National Stock Number, contract or lot number, CAGE code, and clearly marked manufacture and expiration dates to ensure full traceability and compliance. The work must be performed to satisfy U.S. Department of Defense requirements for military supply chain integrity and readiness, with the place of performance specified as Camp Lejeune, North Carolina, zip code 28542-0128. This subcontract is categorized under NAICS code 332913, indicating specialized manufacturing for medical and surgical equipment, and is solicited by the Medical Supply Chain FSH under the Department of Defense. Responses are due by July 27, 2026, following a public posting on July 20, 2026, with all activities aligned to uphold defense logistics and material accountability standards.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Precision Safety Relief Valve Supply (NSN 4820014932641)The contract seeks the supply of two Precision Safety Relief Valves identified by NSN 4820014932641, manufactured to meet rigorous military specifications ensuring optimal performance, durability, and full compatibility with existing defense systems. The valves must comply with all technical and quality standards required for mission-critical applications, with delivery expected to be made to the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is issued as a subcontract under the NAICS code 332913, which classifies the industry as Other Fabricated Metal Product Manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility. The opportunity was posted on July 20, 2026, with a clear response deadline of July 31, 2026, at 5:00 PM Eastern Time, leaving suppliers with a narrow window to submit proposals. As a subcontract under the DLA’s procurement framework, bidders are expected to align with established defense supply chain protocols and may be subject to additional compliance requirements related to sourcing, reporting, and quality control. The contract does not specify a set-aside designation, indicating it is open to all eligible contractors without preference based on size or status. All submissions must be directed through the official DIBBS portal linked in the solicitation notice.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Aluminum Grooved Pipe Coupling SupplyThe contract entails the supply of aluminum grooved pipe couplings with the National Stock Number 4730-01-178-0297, manufactured to meet stringent military standards including CID A-A-52592A Rev. A for technical specifications, ASTM D3951 for packaging requirements, and MIL-STD-129 for proper marking and labeling. These components are critical for military infrastructure and are intended for use in systems requiring durable, corrosion-resistant, and reliably sealed piping connections. The contract is classified as a subcontract under the NAICS code 332913, indicating it falls within the category of other fabricated metal product manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The posting date indicates the solicitation was made in July 2026, with performance expected to fulfill future defense logistics needs, though specific delivery locations and point of contact details are not provided in the recorded data.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Unable to Decompose Subcontract OpportunitiesThe contract pertains to a subcontract opportunity under the Fluid Handling Division of the Department of Defense, with a posting date of July 20, 2026, and a response deadline of July 31, 2026. The place of performance is listed as Jacksonville with a zip code of 28545-6070, though the state and other address details are unavailable. The solicitation number is SPE7M426T271E, accessible via the provided DIBBS link, but no NAICS code, set-aside type, organization type, or point of contact information is provided. The system was unable to decompose any sub-opportunities, and key details such as the contract type specification, funding source, or award criteria remain unidentified due to incomplete metadata.

POSTED

DEADLINE

Small Business Subcontracting & Accelerated Payment AdministrationThe contract titled Small Business Subcontracting & Accelerated Payment Administration is a Total Small Business Set-Aside under FAR 19.5, administered by the Fluid Handling Division of the Department of Defense, with performance centered in Texarkana, Texas, 75507-5000. It requires the contractor to manage the full lifecycle of subcontracting to small businesses, including onboarding, ensuring regulatory compliance, and processing accelerated payments in accordance with FAR 52.232-40. The effort involves seamless coordination through the Wide Area WorkFlow system to facilitate timely and accurate payment disbursements, reinforcing the government’s commitment to small business participation and financial efficiency. The North American Industry Classification System code 541211 indicates the scope relates to accounting, auditing, and bookkeeping services, suggesting the subcontracting administration will focus on financial and compliance support for small business subcontractors. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a sole-source small business set-aside framework.

Offices of Certified Public Accountants

POSTED

DEADLINE

Ocean Transportation & Logistics ManagementThe contract requires the arrangement of ocean transportation for hose assemblies using U.S.-flag vessels in compliance with DFARS 252.247-7023, ensuring adherence to federal regulations for domestic vessel usage. It includes full logistics coordination such as preparation of the bill of lading and synchronization with DLA shipping procedures to guarantee timely and compliant delivery. The work is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside authority, meaning only small business concerns may bid, and the NAICS code 483111 classifies the activity as water transportation of cargo. Performance is designated for TEXARKANA, ZIP 75507-5000, and the solicitation closed on July 31, 2026, with the posting date listed as July 20, 2026. The contracting activity falls under the Department of Defense’s Fluid Handling Division, and the full solicitation details are accessible via the DIBBS portal.

Deep Sea Freight Transportation

POSTED

DEADLINE

MIL-STD-129 Packaging, Marking & Bar-Coding ServicesThe contract requires comprehensive MIL-STD-129 compliant packaging, preservation, marking, and bar-coding services for hose assemblies to support logistics tracking through the Department of Defense supply chain. All deliverables must adhere strictly to MIL-STD-129 standards, including the use of either Data Matrix or linear bar-codes for accurate, automated identification and tracking throughout distribution and field operations. The work must be performed by a small business as this is a total small business set-aside under SBA guidelines, ensuring eligibility and compliance with FAR 19.5. The NAICS code 493190 identifies this as a warehousing and storage service classification, indicating the scope includes both physical handling and documentation control. Performance is required at the specified location in Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the subcontract type, suggesting the successful offeror will be supporting a prime contractor or larger program. The contracting office falls under the Fluid Handling Division of the Department of Defense, underscoring the military and technical nature of the hose assemblies involved. All packaging and marking must ensure durability, legibility, and traceability under operational conditions, with no room for deviations from the mandated standards.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks subcontractor services to prepare and submit hazard warning labels and Material Safety Data Sheets for nonmetallic hose assemblies, ensuring full compliance with OSHA and DFARS regulatory requirements. The work must align with federal safety standards for hazard communication and material documentation, targeting accurate identification of chemical risks, handling procedures, and emergency responses associated with the assemblies. All deliverables are required to meet stringent federal specifications to support safe usage and transportation within defense supply chains. This is a total small business set-aside under the SBA program, classified under NAICS code 541690 for other scientific and technical consulting services, and is issued by the Fluid Handling Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to be centered in Texarkana, Texas, with a zip code of 75507-5000. The contract is structured as a subcontract, and interested parties must be certified as small businesses to qualify for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplyThe contract calls for the supply of 15 units of nonmetallic hose assemblies identified by NSN 4720015234205, which are commercial off-the-shelf items meeting all federal logistics and packaging requirements. This is a subcontract under a Total Small Business Set-Aside, ensuring exclusivity for small businesses as defined by the SBA and FAR 19.5, with the NAICS code 326220 applying to the industry classification. The opportunity was posted on July 20, 2026, and responses are due by July 31, 2026, with performance anticipated to occur in Texarkana, Texas, at the ZIP code 75507-5000. The contracting activity is managed by the Fluid Handling Division within the Department of Defense, and all submissions must be made through the designated DIBBS portal linked in the contract details.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Ocean Transportation of SuppliesThe contract entails the arrangement of ocean freight services using U.S.-flag vessels to transport supplies for the Department of Defense in full compliance with the Buy American Act and MARAD regulatory requirements. All transportation must be executed through vessels that are U.S.-owned, U.S.-crewed, and U.S.-built, ensuring adherence to federal mandates designed to support domestic maritime capabilities and national security interests. The procurement is specifically designated as a subcontract under NAICS code 483111, which classifies it as ocean transportation of freight, and it is directed by the Fluid Handling Division of the DoD. Performance is required to be completed in support of operations at Hill Air Force Base, Utah, with an address of 84056-5734 serving as the designated place of performance. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a tight timeline for interested parties to submit proposals. Participation is limited to entities capable of meeting stringent regulatory and operational standards, including documentation of vessel ownership, crew nationality, and compliance with all applicable defense logistics protocols. While no set-aside designation is specified, the nature of the work inherently favors contractors with established experience in military logistics and maritime shipping under federal oversight. Contractors must be prepared to provide evidence of compliance with U.S. maritime laws and demonstrate capacity to move defense-related cargo efficiently and securely through international waterways under the authority of the Department of Defense.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous Material Identification and LabelingThe contract pertains to the identification, classification, and labeling of hazardous materials linked to a component or its packaging, requiring full compliance with OSHA regulations and the preparation of Material Safety Data Sheets. The work demands accurate determination of chemical hazards, proper labeling in accordance with federal standards, and thorough documentation to ensure safe handling, storage, and transportation of hazardous substances. All activities must align with current regulatory frameworks to mitigate risks and maintain workplace safety. This is a subcontract under the NAICS code 541690, issued by the Fluid Handling Division of the Department of Defense, with performance required at Hill Air Force Base, Utah, zip code 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. Interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Standard Marking and Bar-CodingThis contract requires the application of permanent labels and data matrix barcodes to packaging and units in strict accordance with MIL-STD-129 standards to ensure full compliance with Department of Defense logistics traceability requirements. The work involves precise labeling procedures that enable accurate identification, tracking, and inventory management of military supplies throughout the supply chain, from procurement to field deployment. All markings must meet DoD-specified durability, readability, and placement criteria to support automated scanning and data integration across defense logistics systems. The contract is designated as a subcontract under NAICS code 541380 and is issued by the Fluid Handling Division of the Department of Defense. Performance is required at Hill Air Force Base, Utah, with a zip code of 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. While the specific contracting office and point of contact are not provided, the requirement is critical for maintaining end-to-end visibility of military assets and must be executed with rigorous attention to technical specifications and compliance timelines.

Testing Laboratories and Services

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires specialized packaging, preservation, and palletization of aerospace components in full compliance with military standards to ensure long-term storage and secure transport. This includes the mandatory use of desiccants, vapor corrosion inhibitors, and sealed containment methods to protect sensitive hardware from environmental damage, moisture, and corrosion during extended periods. Work must adhere to stringent military specifications governing material selection, application techniques, and documentation to maintain operational readiness upon deployment. Performance is centered at Hill Air Force Base with a zip code designation of 84056-5734, indicating a critical defense logistics location. The solicitation is classified as a subcontract under NAICS code 561910, reflecting its alignment with support activities for military operations. The contracting entity is the Fluid Handling Division within the Department of Defense, signaling a high-priority procurement tied to defense infrastructure and readiness. Interested parties must submit responses by the deadline of July 31, 2026, with the opportunity announced on July 20, 2026. While no set-aside details are provided, the nature of the work and its placement within a defense agency suggest a focus on qualified, certified subcontractors with proven expertise in military-grade packaging and preservation of aerospace assets.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Aerospace Component ManufacturingThe contract pertains to the precision manufacturing of a high-integrity aerospace actuator clamp and band assembly specifically designed for use on the main landing gear of military aircraft. It demands stringent adherence to military quality standards, with all components requiring exacting machining tolerances and full material traceability from raw stock through final assembly. The work must be performed to ensure structural reliability and operational safety under extreme conditions, consistent with the rigorous demands of defense aerospace applications. All production processes, inspections, and documentation must align with defense-grade quality control protocols to meet certification and audit requirements. Performance of this subcontract is set for Hill Air Force Base, Utah, with an official response deadline of July 31, 2026, and a posted date of July 20, 2026. The North American Industry Classification System code 332999 indicates the work falls under other fabricated metal product manufacturing, underscoring the specialized nature of the components involved. The contracting entity is the Fluid Handling Division under the Department of Defense, which requires vendors to demonstrate proven capability in high-reliability aerospace subsystems. No set-aside provisions are specified, meaning all eligible contractors may respond, but compliance with defense logistics standards and end-use specifications is mandatory for award consideration.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Packaging and Marking Services for Defense LogisticsThe contract requires the provision of military-compliant packaging and marking services in strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items are properly preserved, labeled, and packaged to meet Department of Defense requirements. Services must include unit preservation to protect equipment during storage and transit, accurate container labeling with standardized barcodes and data elements, and full compliance with the DLA Packaging Code Q, which governs the specific packaging protocols for government-furnished materials. All work must align with the rigorous specifications designed to maintain supply chain integrity, traceability, and readiness for military operations. The solicitation is classified as a subcontract under NAICS code 493190, and it is administered by the Fluid Handling Division within the Department of Defense. The opportunity was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a tight turn-around for qualified vendors to submit proposals. The place of performance and point of contact details are not specified, and the contract is accessible via the DIBBS portal. Compliance with all technical, procedural, and regulatory requirements is mandatory, with failure to meet standards potentially resulting in rejection of deliverables or contract termination.

Other Warehousing and Storage

POSTED

DEADLINE