Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Expedited Hazardous Material Processing and Packaging

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Expedited Hazardous Material Processing and Packaging is a subcontract awarded under the Defense Logistics Agency, part of the Department of Defense, to provide rapid and compliant handling, packaging, and documentation of hazardous materials in accordance with Incident Command System emergency protocols. The work is aligned with NAICS code 562910, indicating it falls under remediation and other waste management services, and is designed to support urgent operational needs where speed, safety, and regulatory precision are critical. The contract was posted on June 26, 2026, and is intended for immediate execution in response to dynamic operational environments requiring swift mobilization of hazardous material response capabilities. Performance locations are not explicitly defined, indicating potential deployment across multiple DOD sites or in response to incidents as they arise. Access to full contract details is available through the DIBBS system using the provided link.

General Info

Expedited hazardous material handling and packaging under DLA for emergency DOD operations.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

562910 - Remediation Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SP450026F5982.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LP04C1

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 26

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide rapid handling, packaging, and documentation for hazardous materials under ICS emergency protocols.

Similar Contracts

Same NAICS industry code

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project, necessitated by a sprinkler system failure, requires the remediation of mold throughout the entire building and the cleaning or replacement of damaged theater seating cushions. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the Micro Air Inc. Mold Testing report dated April 11, 2024. Key requirements include the provision of a Certified Industrial Hygienist for daily site visits and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and a one-year guarantee on all workmanship. The contract is a single lump sum award based on best value, with evaluation weights assigned to price (60), quality (20), past performance (10), and schedule (10). Bidders must be small businesses or certified VOSB, SDVOSB, WOSB, or HUBZone entities and must hold a valid Indiana Contractor's License. Mandatory requirements for proposal submission include attendance at the site pre-bid walk-through, a 90-day bid guarantee, and compliance with Davis-Bacon Act wage determinations. The selected contractor must start work within 14 days of the Notice to Proceed and adhere to Net 30 payment terms. Required documentation for the bid includes a detailed cost breakdown, insurance certificates naming Adams and Associates, Inc. as an additional insured, and a completed Vendor Questionnaire and W9.

Atterbury Job Corps Center

POSTED

about 3 hours ago

DEADLINE

UST Removal and Environmental RemediationThis subcontract for UST Removal and Environmental Remediation involves the removal of underground storage tanks at the US Army Watervliet Arsenal facility. The selected contractor will be responsible for pumping out water and oil, executing tank extraction, and performing comprehensive post-removal site cleaning and inspection using specialized pumping and excavation equipment. Key deliverables include the removed tanks, a detailed site inspection report, and all necessary disposal documentation. The project requires strict adherence to safety and regulatory protocols, including the development of a UST Work Plan and the procurement of Confined Space entry permits. This opportunity is designated as a Total Small Business Set Aside under NAICS code 562910. Interested parties must submit their responses by November 12, 2026, for this Department of Defense project located in zip code 12189.

POSTED

about 4 hours ago

DEADLINE

Watervliet Arsenal (WVA) Building 152 (B152) Underground Storage Tank (UST) Removal and Replacement

Solicitation # W911PT27QA002

Solicitation W911PT27QA002 is a total small business set-aside for the removal of an underground storage tank and its replacement with an above-ground tank at Building 152 of the Watervliet Arsenal in New York. The contractor is responsible for providing all construction management, labor, materials, and equipment, including pumping and disposing of tank contents, executing a detailed work plan, and providing a final site inspection and cleaning report with before-and-after documentation. The project must be completed within 90 calendar days from the receipt of the Notice to Proceed, with a performance window scheduled between December 1, 2026, and March 31, 2027. The contract is subject to the Davis-Bacon Act and Buy American-Construction Materials requirements, and it mandates strict adherence to NFPA 70 and UFGS 33 61 13.19 standards. All products must be free of hazardous materials such as asbestos and PCBs, and waste dumpsters must be managed with specific clearance and covering requirements. Award will be based on the lowest evaluated offer or best value, provided the offeror meets all responsibility criteria under FAR 9.104. Proposals must be submitted electronically via the PIEE Solicitation module by November 12, 2026.

POSTED

about 4 hours ago

DEADLINE

Environmental Controls and Dewatering ContractorThis subcontract for the Maine Department of Transportation involves providing environmental controls and dewatering services for culvert projects located in Madison. The contractor is responsible for performing water diversion, pumping, and erosion control to ensure a dry and isolated work environment for prime contractors. Key operational requirements include the installation and maintenance of cofferdams and silt fences, as well as pumping water to maintain downstream flow while ensuring zero unauthorized discharge. All work must be executed in accordance with Special Provision 105 regarding soil erosion and water pollution control measures. The solicitation was posted on October 28, 2026, with a response deadline of November 18, 2026. The project falls under NAICS code 562910 and focuses on critical site preparation and environmental protection during infrastructure improvements.

Maine Department of Transportation

POSTED

about 12 hours ago

DEADLINE

Asbestos Abatement & TestingThis subcontract agreement involves the provision of asbestos material testing and abatement services for prime contractors operating on State University of New York Binghamton facility projects. The scope of work includes the identification of hazardous materials, professional removal, and disposal utilizing specialized containment systems and HEPA filtration to ensure full adherence to environmental regulations. The selected provider must maintain valid asbestos abatement certification and strictly follow EHS compliance standards to deliver certified asbestos-free work areas and detailed testing reports. This opportunity falls under NAICS code 562910, with a response deadline set for November 19, 2026.

State University of New York (SUNY)

POSTED

about 12 hours ago

DEADLINE

Laser Hazardous Material ManagementThis subcontract for Laser Hazardous Material Management supports U.S. Navy NAVSUP laser repair projects in Philadelphia. The selected contractor is responsible for the identification, handling, removal, and disposal of hazardous materials, specifically focusing on depleted laser mediums and chemical coolants. All operations must be conducted using specialized hazmat containment equipment and in strict accordance with FED STD 313, OSHA 29 CFR 1910.1200, and FAR 52.223-3. The contractor is required to provide comprehensive disposal certifications and compliant Material Safety Data Sheets as part of their deliverables. This opportunity falls under NAICS code 562910 and is managed by the Navsup Weapon Systems Support office within the Department of the Navy. Responses are due by November 12, 2026.

Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

Hazardous Materials Abatement

State University of New York (SUNY)

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Roadside Biohazard Cleanup and SanitizationThe Roadside Biohazard Cleanup and Sanitization subcontract involves providing specialized containment, removal, and sanitization services for biological waste at Caltrans roadside facilities in Inyo. The scope of work includes the removal of lab packs and small containers, transferring biowaste into bulk packaging, and utilizing industrial sprayers and personal protective equipment to disinfect contaminated surfaces. The ultimate goal is to deliver fully sanitized and cleared roadside locations for prime contractors. To be eligible for this project, contractors must hold a valid Medical Waste Transporter registration from the California Department of Public Health. This opportunity falls under NAICS code 562910 and is associated with the California Department of Transportation. Interested parties must submit their responses by the deadline of November 10, 2026.

California Department of Transportation

POSTED

about 17 hours ago

DEADLINE

Lead Abatement Cleaning (Firing Range Complex)This subcontract for Lead Abatement Cleaning involves providing specialized lead-contaminated cleaning services for prime contractors working on Gwinnett County Government firing range projects. The scope of work includes HEPA vacuuming of air handling units, walls, and floors, as well as wet wiping of all horizontal and vertical surfaces and cleaning mechanical room floors. Additionally, the contractor is responsible for using spray foam to seal leaks between plates or auger system joints to ensure the facility meets required lead clearance levels. Strict safety and regulatory compliance is mandatory, requiring supervision by a competent person licensed by the EPA or Georgia DNR and the use of OSHA-mandated personal protective equipment. This opportunity is categorized under NAICS code 562910, with a response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 18 hours ago

DEADLINE

24/7 Emergency Hazardous Materials ResponseThis subcontract for 24/7 Emergency Hazardous Materials Response supports prime contractors on OC Waste and Recycling projects in California. The selected provider will deliver rapid-response staffing and equipment to manage spill emergencies, focusing on same-day on-site stabilization, the packaging of leaked materials, and the monitoring of flammable vapors using 4-gas/LEL monitors. All participating technicians must be HAZWOPER certified and maintain strict compliance with CFR Title 29 standards to ensure the safe removal and stabilization of hazardous materials. The solicitation is categorized under NAICS code 562910, with a response deadline set for November 25, 2026.

OC Waste & Recycling

POSTED

about 19 hours ago

DEADLINE

Asbestos Hazard MitigationThis subcontract for Asbestos Hazard Mitigation involves providing specialized testing and abatement services for prime contractors working on California Department of General Services lease projects. The scope of work includes sampling building materials, conducting comprehensive asbestos surveys, and the physical removal of asbestos-containing materials utilizing negative air machines, containment barriers, and HEPA vacuums. Upon completion, the contractor is responsible for delivering official clearance reports and asbestos-free certifications. To be eligible for this engagement, the service provider must hold a valid certification from the State of California Department of Public Health. The opportunity is categorized under NAICS code 562910, with a response deadline set for November 12, 2026.

California Department of General Services

POSTED

about 20 hours ago

DEADLINE

Asbestos and Hazardous Materials Abatement (Roof & Equipment)This subcontract involves the abatement and removal of asbestos-containing materials and hazardous substances at the New York State School for the Blind. The scope of work focuses on roof frames and roof-mounted equipment, including necessary sampling, TCLP analysis, and the transportation of waste in strict accordance with NYCRR regulations. The selected contractor is responsible for providing certified abatement services and delivering all required waste disposal manifests. To qualify for this project, contractors must hold valid certifications from the NYSDOH, OSHA, and EPA for both asbestos and lead-based paint. This opportunity is managed under the NYS OGS Design and Construction agency with a response deadline of December 9, 2026.

NYS OGS Design & Construction - Construction Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 23 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 23 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Disposal of RCRA-Designated Hazardous Waste

Defense Logistics Agency

POSTED

DEADLINE

Industrial Cleaning Services at Designated Pickup Points

Defense Logistics Agency

POSTED

DEADLINE

Silver Nitrate Waste Destruction

Defense Logistics Agency

POSTED

DEADLINE

TEST, ORGANICS, PCBS, TOTAL

Solicitation # SP450026F6002

Defense Logistics Agency

POSTED

DEADLINE

J091--Fuel Oil Polishing Services for VA Coatesville

Solicitation # 36C24426Q0485

244-NETWORK Contract Office 4 (36C244)

POSTED

CLOSED

Asbestos Management and Abatement

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Interior Demolition and Abatement Services

National Operations Center

POSTED

CLOSED

Hazardous Material Abatement (Asbestos and Lead)

Navy Exchange Service Command

POSTED

CLOSED

Environmental Compliance and Refrigerant Handling

Csa East 6 Usda-Fs

POSTED

CLOSED

Hazardous Materials Handling and Authorization

FA4613 90 Cons Pk

POSTED

CLOSED

Asbestos and Hazardous Material Abatement

FA5682 31 Cons (unit 6102)

POSTED

CLOSED

Removal and Disposal of Existing A/C Components

Jefferson Labor - DOE Contractor

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS