Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Expression of interest: Small-satellite missions sandpit

Active

206083Grant

Response Deadline11/25/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

UK Research and Innovation is seeking expressions of interest for a small-satellite missions sandpit designed to bring together approximately 30 researchers and innovators from diverse disciplines. The goal is to co-develop ambitious, challenge-led small-satellite mission concepts focusing on innovative sensors, data streams, and cross-sector enabling technologies to enhance sovereign capability, address national security and societal challenges, and support economic growth. The activity consists of six sessions held between January 26 and February 11, 2027, utilizing a combination of online sessions and a two-day residential event. Total program funding is listed at 1,870,000, with the objective of developing concepts for pump-priming research grants in 2027/2028. Selection of participants is based on core assessment questions focusing on skills and potential contributions rather than track record, with additional consideration given to geographic diversity across all UK regions. Applicants must apply through an Expression of Interest stage, and invited applicants will use the Resume for Research and Innovation format. Mandatory attendance at all sessions is required, with travel and subsistence costs reimbursed and accommodation provided for overnight stays. The program is managed by the UKRI Space Programme team, with the response deadline for the solicitation set for November 25, 2026.

General Info

UKRI seeks researchers to co-develop innovative small-satellite mission concepts for future funding.

Agency

UK Research and Innovation

NAICS

927110 - Space Research and Technology

Place of Performance

Not specified

Set-Aside

NONE

Documents

1

Small-satellite Missions Sandpit Equality Impact Assessment

special-notice

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PostedOct 21

Contract opportunity posted

Response DeadlineNov 25

Submission deadline

Response Deadline

11/25/2026, 04:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUK Research and Innovation

Contacts2 people available

OfficeN/A

Organization / AgencyUK Research and Innovation

Office AddressN/A

Contacts

contact@example.gov

contact@example.gov

Similar Contracts

Same NAICS industry code

DSN Maintenance & Operations (M&O)The DSN Maintenance and Operations contract is a competitive forecast issued by the NASA Jet Propulsion Laboratory for services based in Pasadena, California. Falling under NAICS code 927110, the project focuses on the essential upkeep and operational support of the Deep Space Network. The initial period of performance is scheduled to conclude on September 30, 2028. However, the contract includes options that allow for an extension of the performance period through September 30, 2033.

NASA Jet Propulsion Laboratory

POSTED

about 3 hours ago

DEADLINE

Mission Assurance Support Services (MASS)The Mission Assurance Support Services contract is a small business set-aside opportunity issued by the NASA Jet Propulsion Laboratory. This competitive procurement falls under NAICS code 927110 and is designed to provide essential support services to ensure mission success. The work is to be performed in Pasadena, California. The period of performance for this engagement extends through December 31, 2025, with options available for extension. Interested parties can find further details regarding this forecast through the official NASA Jet Propulsion Laboratory small business opportunities portal.

NASA Jet Propulsion Laboratory

POSTED

about 3 hours ago

DEADLINE

SUPPORT EFFORT TASK FOR JPL-CONTROLLED TABLE MOUNTAIN FACILITY (TMF)This small business set-aside contract involves a support effort task for the Jet Propulsion Laboratory controlled Table Mountain Facility. Managed by the National Aeronautics and Space Administration, the work is centered in Pasadena, California, under NAICS code 927110. The initial period of performance is scheduled to end on September 30, 2025. The agreement includes options for extension that allow the contract to continue through September 30, 2028.

NASA Jet Propulsion Laboratory

POSTED

about 3 hours ago

DEADLINE

Engineering, Implementation, Science, Operations and Communications (EISOC) effortThe Engineering, Implementation, Science, Operations and Communications (EISOC) effort is a competitive small business set-aside contract managed by the NASA Jet Propulsion Laboratory. Based in Pasadena, California, the project falls under NAICS code 927110 and focuses on a multidisciplinary approach to engineering and scientific operations. The initial period of performance is scheduled to conclude on September 30, 2027. The contract includes options for extension, which could potentially extend the duration of the effort through September 30, 2029.

NASA Jet Propulsion Laboratory

POSTED

about 3 hours ago

DEADLINE

Counter-Targeting Request for Information

Solicitation # EWTIP-RFI-FY27-01

The Space Systems Command (SSC), located at Los Angeles Air Force Base, California, has issued a Request for Information (RFI) under solicitation number EWTIP-RFI-FY27-01. This effort seeks Statements of Capabilities (SOC) and demonstrations of counter-targeting capabilities to support the Combat Forces Command (CFC), Mission Delta 3 (MD 3), and SSC System Delta 89 (SYD 89) space electromagnetic warfare systems improvement initiative. The government is looking for technical, managerial, and logistical efforts to implement specific capabilities detailed in a classified annex, which is available upon request to the designated points of contact. This notice is issued solely for information and planning purposes and does not constitute a formal solicitation or a commitment by the United States Space Force to award a contract. Interested parties must submit a Statement of Capabilities not exceeding ten pages, formatted in 10-point Times New Roman font with one-inch margins, and delivered in Microsoft Word format. The deadline for submission is November 30, 2026, by 1700 Pacific Time. While no specific set-aside is currently designated, the government reserves the right to set the eventual acquisition aside for small businesses, including veteran-owned or woman-owned firms.

FA8819 Sda And Combat Power Szk-La

POSTED

DEADLINE

in about 1 month

Solicitation of Offers – Spatial Heterodyne Observations of Water (SHOW) Instrument Phase A

Solicitation # WS5856571378

The Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for Phase A work on the Spatial Heterodyne Observations of Water (SHOW) Instrument as part of the HAWCsat project for the Canadian Space Agency. This federal solicitation, identified by number WS5856571378, involves performance of work located in Longueuil, Canada. Interested offerors must submit their proposals by the deadline of October 26, 2026, at 7:00 p.m. EDT, as late submissions will not be accepted. While an optional offerors conference was scheduled for September 8, 2026, via Microsoft Teams, all formal inquiries and submissions should be directed to the contracting authority, Laurie Kretzul.

Department of Public Works and Government Services

POSTED

DEADLINE

Enabling Technology for Future Missions

Solicitation # 9F063-20260085

The Canadian Space Agency (CSA) is soliciting proposals under solicitation number 9F063-20260085 for the development of one to three enabling technologies to support future space missions. The primary objective is to advance strategic technologies to reduce technical uncertainties and support the implementation of future Canadian space activities. A specific focus of this effort is the maturation of a lightweight, athermal reflecting telescope capability to Technology Readiness Level (TRL) 5. This includes the delivery of a reflecting telescope brassboard validated for Low Earth Orbit (LEO) vibration and thermal-vacuum environments, intended for Earth Observation imaging payloads on CubeSats of 4U or larger, with the telescope itself being 2U or less. Key performance targets include a Ground Sampling Distance of less than 7 metres and a swath width greater than 5 km. The project is planned for a duration of 16 months, structured around five key milestones: a Kick-off meeting, Preliminary Design Review, Detailed Design Review/Work Authorization Meeting, Test Readiness Review, and a Final Review meeting. Deliverables include the hardware brassboard, CAD and performance analysis models, software, and a Technology Roadmap for advancing to TRL 6-8. This solicitation is restricted to Canadian suppliers. Awards will be based on the highest combined rating of technical merit (60 percent) and price (40 percent), with a minimum technical score of 70 points required for consideration. The procurement process includes strict requirements for security clearances, intellectual property disclosure, and adherence to environmentally preferable packaging standards.

Canadian Space Agency

POSTED

DEADLINE

in about 1 month

Hyperspace - The Space Force Market in 2027: What Startups Should WatchHyperspace - The Space Force Market in 2027: What Startups Should Watch is a forecast event hosted by the Space Systems Command under the Department of the Air Force. This virtual session is designed for a broad audience including military, civilian, industry, and academic participants. The program focuses on identifying emerging Space Force capability needs, investment trends, and acquisition activities to help startups recognize and position themselves for future market opportunities. Panelists will provide insights into growing government demand and specific technology sectors currently attracting investor interest. By analyzing market signals, the event aims to guide startups on how to align their development with the projected needs of the Space Force over the next several years. Registration is available via Zoom for those interested in attending this strategic discussion.

Space Systems Command

POSTED

DEADLINE

Solicitation of Offers - ALI Instrument Phase A

Solicitation # WS5881205680

The Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for Phase A work on the ALI Instrument as part of the HAWCsat project for the Canadian Space Agency. This federal solicitation, identified by number WS5881205680, involves performance of work located in Longueuil. Interested offerors must submit their responses by the deadline of November 9, 2026, at 7:00 p.m. EDT, as late submissions will not be accepted. While an optional offeror's conference was scheduled for September 29, 2026, via Microsoft Teams, all formal inquiries and submissions should be directed to the contracting authority, Laurie Kretzul.

Department of Public Works and Government Services

POSTED

DEADLINE

Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Technical Library

Solicitation # 80JSC025_CLDC_TECH_LIBRARY

The Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Technical Library, managed by the NASA Johnson Space Center, serves as a centralized repository of technical standards, plans, and guidelines for potential offerors. This initiative is part of a broader strategy to support the development of private LEO space destinations and supporting systems as NASA prepares for the retirement of the International Space Station. The library provides a series of data drops containing both controlled and uncontrolled technical data, including standards for docking systems, payload interfaces, and crew health operations. It also outlines specific NASA center capabilities and high-value engineering products available to industry partners to reduce technical and schedule risks. It is important to note that this activity is a special notice and does not constitute a Request for Proposals, Invitation for Bid, or Request for Quotation. No proposals are to be submitted in response to this notice, and it does not represent a commitment by the government to enter into a contract. Access to export-controlled content requires the submission of a specific request form and compliance with U.S. export regulations, including the implementation of Technology Transfer Control Plans and Non-Disclosure Agreements for foreign nationals. The library is intended to keep industry updated on current NASA technical standards in anticipation of future FAR-based acquisitions.

NASA Johnson Space Center

POSTED

DEADLINE

ROSES 2025: B.7 The Heliophysics Low-Cost Access to Space

Solicitation # NNH25ZDA001N-LCAS

The ROSES 2025 Heliophysics Low-Cost Access to Space solicitation is a federal opportunity managed by NASA Headquarters. This program utilizes a binding two-step submission process, requiring a Step-1 proposal by November 20, 2026, as a prerequisite for submitting a Step-2 proposal by March 16, 2027. Awards may be issued as grants, cooperative agreements, or contracts, with a typical performance period of three years, though some may extend to five years. Proposals must adhere to a 20-page limit for the anonymized central Science-Technical-Management section and will be evaluated via dual anonymous peer review. Key required documentation includes a separately uploaded Payload Reference Document, a Rideshare Opportunity section, and an Application of Traceability Matrix for science-enabling-only proposals. Proposers are also encouraged to use the standard SMD template for the Open Science Data Management Plan.

NASA Headquarters

POSTED

DEADLINE

B.7 The Heliophysics Low-Cost Access to Space

Solicitation # NNH25ZDA001N-LCAS

The Heliophysics Low-Cost Access to Space (H-LCAS) program, solicitation NNH25ZDA001N-LCAS, is a research opportunity managed by the NASA Science Mission Directorate. The program supports the development and maturation of innovative instruments, technologies, and flight investigations using sounding rockets, high-altitude balloons, CubeSats, or airborne platforms. Projects are categorized as either science or science-enabling and are evaluated based on their scientific and technical merit, relevance to the 2024-2033 Heliophysics Decadal Survey or NASA strategic objectives, and cost reasonableness. Awards typically have a duration of three years, with a maximum of four years available upon justification, and are expected to start approximately six months after the proposal due date. Eligible organizations of all types may propose, though participation by the People's Republic of China is prohibited and non-U.S. organizations may participate on a no exchange of funds basis. Applicants must be registered in SAM.gov and provide a Unique Entity Identifier. Proposals must be submitted electronically via NSPIRES by an Authorized Organizational Representative and include a 20-page Science-Technical-Management section, a 4,000-character summary, and required non-anonymized attachments including a total budget, a Payload Reference Document, and an Expertise and Resources appendix. Key deliverables include the development of flight hardware, the archiving of calibrated data in a NASA online facility, and publication in professional journals.

Science Mission Directorate

POSTED

DEADLINE

More opportunities from UK Research and Innovation

Same awarding agency

Small-Satellite Concept ResearchThis subcontract focuses on research and development to design small-satellite mission concepts for prime contractors operating under UK Research and Innovation projects. The primary objective is to develop innovative sensors, data streams, and cross-sector enabling technologies that address critical societal challenges and national security needs. To achieve this, the contractor will utilize orbital mechanics tools and satellite modeling software, ensuring all outputs align with the UK Space Strategy and sovereign capability requirements. The scope of work culminates in the delivery of a pump-priming research grant application. This opportunity is categorized under NAICS code 541715 and is managed by UK Research and Innovation. Interested parties must adhere to the response deadline of November 25, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 1 month

Residential Event Venue & Hospitality ServicesThis subcontract for Residential Event Venue and Hospitality Services supports prime contractors working on UK Research and Innovation space projects. The selected provider will supply physical facilities, overnight lodging, and catering for a two-day residential event hosting 30 participants. Key requirements include meeting rooms equipped with AV capabilities for hybrid integration, strict adherence to accessibility standards, and the ability to accommodate specific dietary and religious catering needs. The opportunity is managed by UK Research and Innovation under NAICS code 721110. Interested parties must submit their responses by the deadline of November 25, 2026. The contract focuses on delivering a comprehensive hospitality package to ensure the successful execution of a specialized residential gathering.

Hotels (except Casino Hotels) and Motels

POSTED

DEADLINE

in about 1 month

Professional Event Facilitation ServicesThis subcontract for Professional Event Facilitation Services involves the co-design and delivery of a research sandpit event for prime contractors on UK Research and Innovation space projects. The selected provider will facilitate six sessions, consisting of both online and residential workshops, to guide 30 interdisciplinary researchers in the development of small-satellite mission concepts. The project requires the application of design thinking frameworks and the use of online collaboration tools to produce executed workshop sessions and conceptual frameworks. The service provider must hold professional certification in facilitation to be eligible. This opportunity was posted on October 21, 2026, with a response deadline of November 25, 2026. The contract falls under NAICS code 541611 and is managed by UK Research and Innovation.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Pre-announcement: Engineering Biology Programme: foundational technology hubs

Solicitation # 206090

POSTED

DEADLINE

Industrialization & Scale-Up EngineeringThis subcontract for Industrialization and Scale-Up Engineering, issued by UK Research and Innovation, focuses on transitioning laboratory discoveries into full-scale industrial manufacturing for prime contractors on UKRI/EPSRC projects. The selected provider will be responsible for designing scale-up workflows utilizing pilot plants and CAD/CAM software, ultimately delivering production prototypes, industrialization reports, and comprehensive scale-up roadmaps. To ensure high-quality industrial standards, the contractor must maintain either AS9100 for aerospace or IATF 16949 for automotive quality management. The solicitation was posted on October 7, 2026, with a response deadline of December 9, 2026. This opportunity falls under NAICS code 541330 and is specifically targeted toward advancing manufacturing research and innovation within the automotive and aerospace sectors.

Engineering Services

POSTED

DEADLINE

in about 2 months

Ion Beam Material Modification ServicesThis subcontract for Ion Beam Material Modification Services, issued by UK Research and Innovation, provides specialized ion beam processing and analysis to modify material properties for prime contractors. The work supports aerospace and automotive manufacturing projects under UKRI and EPSRC, utilizing the facilities and implantation equipment at the UK National Ion Beam Centre. The primary deliverables include modified material samples and detailed analysis of resulting surface and structural changes. The project requires strict adherence to UKNIBC access and safety protocols. Interested parties should note the response deadline of December 9, 2026, for this specialized technical service categorized under NAICS code 541715.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

X-Ray Materials Science AnalysisThis subcontract, titled X-Ray Materials Science Analysis, is issued by UK Research and Innovation to provide specialized X-ray based material analysis for prime contractors involved in UKRI/EPSRC manufacturing scale-up projects. The scope of work involves utilizing the X-ray Materials Science Facility at the ESRF and the UK National Facility for X-ray Photoelectron Spectroscopy at HarwellXPS, leveraging synchrotron X-ray sources and XPS spectrometers to deliver detailed X-ray diffraction and spectroscopy data along with comprehensive analysis reports. The opportunity was posted on October 7, 2026, with a response deadline of December 9, 2026. Classified under NAICS code 541715, the contract focuses on high-level scientific research and analysis to support innovation within the automotive and aerospace manufacturing sectors.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Advanced Electron Microscopy ServicesThis subcontract for Advanced Electron Microscopy Services involves providing high-resolution imaging and material analysis for prime contractors working on UKRI/EPSRC automotive and aerospace manufacturing projects. The scope of work focuses on delivering detailed material characterization reports and high-resolution imagery, utilizing the UK National Facility for Advanced Electron Microscopy, known as SuperSTEM. Managed by UK Research and Innovation under NAICS code 541715, the contract requires specific facility access via SuperSTEM to perform the necessary analysis. The solicitation was posted on October 7, 2026, with a response deadline set for December 9, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Advanced Materials Manufacturing Scale-Up ResearchThis subcontract for Advanced Materials Manufacturing Scale-Up Research involves performing research and development activities for prime contractors on EPSRC/UKRI Network Plus projects. The primary objective is to identify and resolve technical barriers to scaling production in alignment with the UK Government's Modern Industrial Strategy. The work requires the use of advanced material synthesis equipment and characterization tools to deliver research findings, validated scale-up methodologies, or scaled production processes. Managed by UK Research and Innovation, the contract requires strict adherence to EPSRC eligibility criteria and GDPR compliance. Interested parties must submit their responses by December 9, 2026. The project falls under NAICS code 541715, focusing on the advancement of manufacturing capabilities for specialized materials.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Automotive Manufacturing Scale-Up ResearchThe Automotive Manufacturing Scale-Up Research subcontract, managed by UK Research and Innovation, focuses on performing research and development activities for prime contractors on EPSRC/UKRI Network Plus projects. The primary objective is to identify and overcome technical barriers to scaling production within the automotive sector, aligning with the UK Government's Modern Industrial Strategy. This work involves the practical application of advanced tooling, vehicle components, and automotive production lines to deliver validated scale-up methodologies, scaled prototypes, or detailed research findings. Eligible participants must meet specific EPSRC criteria and maintain strict GDPR compliance throughout the project. Interested parties should note that the response deadline is December 9, 2026. The project is categorized under NAICS code 541715, emphasizing its focus on research and experimental development within the engineering and manufacturing landscape.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Aerospace Manufacturing Scale-Up ResearchThe Aerospace Manufacturing Scale-Up Research subcontract, managed by UK Research and Innovation, focuses on performing research and development activities for prime contractors within EPSRC/UKRI Network Plus projects. The primary objective is to identify and resolve technical barriers to scaling production in the aerospace sector, aligning with the UK Government's Modern Industrial Strategy. To achieve this, the project requires the use of aerospace-grade materials and specialized manufacturing facilities to deliver validated scale-up methodologies, scaled prototypes, or detailed research findings. Eligible participants must meet specific EPSRC criteria and maintain strict GDPR compliance throughout the engagement. Interested parties should note that the solicitation was posted on October 7, 2026, with a response deadline of December 9, 2026. This initiative is categorized under NAICS code 541715, emphasizing its focus on research and experimental development within the aerospace manufacturing landscape.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Manufacturing Scale-up Network Plus

Solicitation # OPP01394

The Manufacturing Scale-up Network Plus, identified by solicitation number OPP01394, is an initiative by UK Research and Innovation and the EPSRC to establish a UK collaboration focused on overcoming manufacturing scale-up challenges. The scope of this opportunity specifically targets the aerospace, advanced materials, and automotive sectors. This call was informed by the UK government's Modern Industrial Strategy and requires all participants to adhere to standard EPSRC policies and General Data Protection regulations regarding sensitive information. The application process is open to all parties meeting the EPSRC eligibility criteria, with the response deadline set for December 9, 2026. Awards will be determined using standard protocols and clearly published assessment criteria, though geographical location is explicitly not a factor in the evaluation. The project was formally signed off on September 17, 2026, and interested parties can contact the sustainable manufacturing or funding service teams at UKRI for further information.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS