FA2521-17-Q-B212

SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR PROPOSAL BUT INFORMATION AND PLANNING PURPOSES ONLY! It does not constitute a solicitation and/or quote and is not to be construed as a commitment by the Government. Request for Proposal (RFP) number is FA2521-17-Q-B212 EPIC RF to Fiber Project shall be used to reference any written responses to this source sought. Patrick Air Force Base anticipates a requirement that is being considered under a small business set-aside program. The North American Industry Classification Systems (NAICS) Code proposed 334413 . The size standard for NAICS is 1250 Employees. The requirement is to provide the following items produced by Emcore with the purpose of increasing the range's ability to support multiple operations by replacing the Telemetry Retransmission System and extending full telemetry reception and tracking to diverse locations across CCAFS: a. OPV-CTLR-IC NMS SNMP Controller card, 1 each b. OTS-1LT1/S5-1306-SA-IC Tx, 50 - 3000 MHz, SMA 50 ohm, DFB 1310nm, 6 dBm, SC/APC, 4 each c. OTS-1LR/S5-SA-IC Rx, 50 - 3000 MHz, SMA 50 ohm, 1310/1550nm, SC/APC, 4 each d. OT-CC-16F-002 Chassis, Optiva , 3RU, 16 slot, front access, 2 each e. PS-200F-NA Optiva, Power supply, Primary, 4 each f. OTS-RSU-4T-S5 RSU, 1 x 4 Optiva , 10 -3000 MHz redundancy, 1 each g. OT-DTCR-2 Chassis, Optiva, 2 slot, desktop, & universal 110/220 Power Supply, 4 each GS Schedule 56 Salient Characteristics: a. OPV-CTLR-IC NMS SNMP: Features: - 10/100 Ethernet Monitoring Interface - Auto Detection of Signals - Optical Bandwidth Analysis System Diagnostics - Alert Log - SNMP 1.0 Compatible - Manageable by any SNMP GUI - All User MIB's -Compatible with any Optiva Enclosure b. OTS-1LT1/S5-1306-SA-IC: Applications: - Satellite Antenna Signal Transport - DBS Antenna Signal Distribution - Inter-Facility Signal Transport Features: - 50 MHz to 3 GHz Optimize for IF, L- and S-Band Satellite Signals - Supports 30 km Links and 1310 nm - 30 dB Tx and Rx Adjustable Gain Range - Peak Optimizer for Quick and Easy Setup - SmartGain for Enhanced AGC Performance - 50 & 75 Ohm BNC or 50 Ohm SMA - Tx RF Power Monitors via LED, SMA & SNMP - Built-in LNB Power with Selectable 13/18 V and 22 KHz - SNMP Monitoring and Control - Optically-Isolated Un-Cooled DFB Lasers Enable High-Dynamic-Range Links - Fits in Optiva Enclosures, Which Support Daisy Chain Video, Audio, and Data Links -16, 6, 2, & 1 Slot Enclosures Available - CE & CSA Certified, RoHS Compliant c. OTS-1LR/S5-SA-IC: Applications: - Satellite Antenna Signal Transport - DBS Antenna Signal Distribution - Inter-Facility Signal Transport Features: - 50 MHz to 3 GHz Opmized for IF, L- and S-Band Satellite Signals - Supports 30 km Links and 1310 nm - 30 dB Tx and Rx Adjustable Gain Range - Peak Optimizer for Quick and Easy Setup - SmartGain for Enhanced AGC Performance - 50 & 75 Ohm BNC or 50 Ohm SMA - Rx RF Power Monitors via LED, SMA & SNMP - Built-in LNB Power with Selectable 13/18 V and 22 KHz - SNMP Monitoring and Control - Optically-Isolated Un-Cooled DFB Lasers Enable High-Dynamic-Range Links - Fits in Optiva Enclosures, Which Support Daisy Chain Video, Audio, and Data Links -16, 6, 2, & 1 Slot Enclosures Available - CE & CSA Certified, RoHS Compliant d. OT-CC-16F-002: Features: - High Capacity, 3u, 16 Slot Chassis Provides Optimal Space Utilization and Density - Hot Swappable Redundant Power Supplies Ensure Increased Reliability - EMI/EMC and Safety Standards Confom to CSA and CSE Standards - Global Alarm LED on Front Panel - Flexible Mounting Options: Short Mounting Ears, Rear; Short Mounting Ears, Front; Long Mounting Ears, Rear - Unique Daisy-Chaining Design Better Utilizes Fiber Bandwidth - Flexible Chassis Design Accepts All Optiva Plugin Cards: Audio, Video, Data, RF and Microwave - Chassis to Card Grounding Protects Against Electrostatic Discharge During Insertion and Removal of Hot Swappable Insert Cards - Ruggedized Aluminum Chassis Resists Shock and Vibration e. PS-200F-NA: Features - 200 Watt, 90 - 264 VAC - Low Leakage Current - Wide Temperature Range - EMI/EMC and Safety Standards conform to CSA and CE Standards - Overload, Over Voltage & Over temperature Protection - Global Chassis Alarm LED - Alarm status available through SNMP - Load sharing - Enables power supply redundancy - Hot swappable f. OTS-RSU-4T-S5: Features - 10 MHz to 3 GHz Satellite Signals - 1x2, 1x4, 1x8 Switch Configurations - 50 & 75 Ohm BNC or 50 Ohm SMA - Dedicated Comm-Link for Rapid Switching Response - Automatic and Manual Redundancy Modes - Manual Position/Enable Select Button - Channel Status and Switch Position LED - SNMP Monitoring and Control - LNB Power Pass-Through - Fits in Optiva Enclosures Which Support Daisy Chain Video, Audio and Data Links - Hot Swap Redundant Power Supplies Virtually Eliminate Downtime - 16, 6, 2, & 1 Slot Enclosures Available - CE & CSA Certified Device, RoHS Compliant g. OT-DTCR-2: Features - Simultaneous Transport of 10 MHz and L-Band Signals - Supports 10 km Links - 50 Ohm SMA - Tx & Rx RF Power Monitors via LED, SMA & SNMP - Receiver DC Output - SNMP Monitoring and Control - Optically-Isolated Uncooled DFB Lasers Enable High-Dynamic-Range Links - Fits in Optiva Enclosures, Which Support Daisy Chain Video, Audio, and Data Links -16, 6, & 2 Slot Enclosures Available - CE & CSA Certified, RoHS Compliant NOTE: RESPONSES TO THIS SOURCES SOUGHT SHALL STATE IF THEY ARE A SUPPLIER OR MANUFACTURER! 45 CONS is interested in any size business that is capable of meeting this requirement. The government is also interested in all small businesses including (8(a), Historically Underutilized Business Zone, Service Disabled Veteran Owned Small Businesses (SDVOSB), or, if applicable based on NAICS code, Economically disadvantaged women-owned small business (EDWOSB) Women Owned Small Businesses (WOSB) that are interested in performing this requirement. The government requests interested parties submit a brief description of their company's business size (i.e. annual revenues and employee size), business status (i.e., 8(a), Historically Underutilized Business Zone, or SDVOSB, WOSB, EDWOSB, or small business) anticipated teaming arrangements, and a description of similar services offered to the Government and to commercial customers. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. The Government will use this information in determining its small business set-aside decision." As stipulated in FAR 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation exists; therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government's discretion. Any information submitted by respondents to this sources sought synopsis is voluntary. This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any government assessments. The Government's evaluation of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small businesses, or any particular small business designation (e.g. SDVOSB, HUBZone, 8(a), WOSB, VOSB, etc.). All interested firms shall submit a capabilities package that explicitly demonstrates company capabilities-indicating examples of commercial sales-and product specifications related to this effort. Also indicate if you are the manufacturer, or provide the name and size of the manufacturer of the product(s) you will be supplying. Respondents are further requested to indicate their status as a Foreign-owned/foreign-controlled firm and any contemplated us of foreign national employees on this effort. Include in your capabilities package your DUNS, Cage Code, System for Award Management expiration date, GSA contract number and expiration (if applicable), and any related specifications/drawings. Responses may be submitted electronically to the following e-mail address: contact@example.gov; by mail to 45 CONS/LGCB, Attn: FA2521-17-Q-B212, 1201 Edward H. White II Street, Bldg. 423, Room N206, Patrick AFB, FL 32925-3238. RESPONSES ARE DUE NO LATER THAN 3 Aug 2017, 3PM EST.