This Government Contract opportunity from Louisiana was posted on August 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fabrication and Installation of Heavy-Duty Dump Body

Closed

State & Local

Submission Closed09/03/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8ED-27-T-0031

Solicitation SPE8ED-27-T-0031 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment Containers for the procurement of eight liquid storage tanks, identified by NSN 5430-01-454-6414 and part number 6615254 from JLG Industries Inc. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of December 31, 2026, and an original required delivery date of April 6, 2027. Delivery is established as FOB Origin with a delivery period of 76 days after order. Inspection and acceptance will occur at the destination. The procurement is subject to strict technical and quality standards, specifically DLA Master List requirements, which take precedence over ASTM D3951 for non-hazardous commercial packaging. All shipments must be palletized per RP001 and labeled according to MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must submit quotes via DIBBS and provide necessary representations regarding their small business status under NAICS code 332420 and compliance with telecommunications equipment restrictions.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

208-720020/Fuel Transfer Tanks

Solicitation # SRC0000036872

N Reg Tuscumbia Area Eqpt M

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5790

Solicitation SPE8E8-26-T-5790 is a total small business set-aside issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one sewage collection tank, identified by NSN 4630-01-255-7819. The requirement is for a single unit to be delivered FOB Origin to the MSC Warehouse in Norfolk, Virginia, with an original required delivery date of March 17, 2026, and a delivery window of 20 days after the order. The procurement is conducted as an automated simplified acquisition via the DLA Internet Bid Board System, with quotations due by October 13, 2026. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and RP001 for palletization. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions per NAVSEA 5100-003D. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with DFARS 252.204-7012 for safeguarding covered defense information, and adherence to the Buy American Act and Berry Amendment regarding domestic sourcing.

Defense Logistics Agency

POSTED

DEADLINE

TANK, FABRIC, COLLAPSIBL

Solicitation # SPE8ED-26-T-1484

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

CYLINDER, COMPRESSED GA

Solicitation # SPE4A0-27-T-0010

Solicitation SPE4A0-27-T-0010 is a fixed-price request for quotations issued by the Defense Logistics Agency for two empty size D aluminum medical oxygen cylinders. The required equipment is specified as Allied Healthcare Products, Inc. part number 31-10-0014 under NSN 8120-01-253-3852. Delivery is required within five days after order, with an original required delivery date of September 30, 2026, shipped FOB Origin to Camp Humphreys in Pyeongtaek, South Korea. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1. Palletization must follow MIL-STD-147 or RP001 for loads exceeding 250 lbs or 20 cubic feet, and passive RFID tags are required for DLA Distribution shipments. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must submit quotes via the DLA Internet Bid Board System by October 9, 2026, and must comply with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and telecommunications prohibitions. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

81--CYLINDER,COMPRESSED, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC29

Solicitation N0038326QSC29, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the overhaul, upgrade, repair, testing, and inspection of compressed cylinders (NSN 7RH 8120-01-657-1545 P8). The objective is to restore these assets to a Ready For Issue condition in accordance with AVOX Systems Inc drawing 808158-01. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as government-furnished tooling is not provided. Key performance metrics include a Repair Turnaround Time of 70 days after receipt of assets, with an induction expiration date set at 365 days after contract award. The contract mandates strict quality and compliance standards, requiring a quality management system conforming to ISO 9001 or SAE AS9100 and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. Packaging must adhere to MIL-STD-2073, and markings must comply with MIL-STD-130 and MIL-STD-129. Invoicing and receiving reports are to be processed electronically via Wide Area Workflow. Award will be made to a responsible offeror based on a determination of the most advantageous proposal, with past performance weighted as more important than price, although the solicitation also references a lowest priced technically acceptable methodology.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aluminum Fish distribution tank

Solicitation # SRC0000042181

The Ohio Department of Natural Resources, through the Division of Wildlife at the Castalia State Fish Hatchery, is soliciting quotes for the procurement of one new custom aluminum fish distribution tank. The required hardware consists of a 96-inch long, 66-inch wide, and 40-inch tall tank featuring two equal compartments of approximately 385 gallons each. Technical specifications include 2-inch insulated closed-cell walls, floor, and ceiling, constructed with 3003-H14 smooth aluminum sheets and 6061-T6 aluminum extrusions. The tank must be equipped with four 12-volt Fresh-Flo TT aerators, an electrical switch box, an oxygen system with flowmeters and ceramic diffusers, and two 6-inch camlock discharges. A rough design mockup must be submitted to the ODNR for verification prior to the commencement of construction, and the final product must include a 5-year workmanship warranty. The contract will be awarded to the lowest responsive and responsible bidder based on the low lot total. The State will apply specific preferences for Buy American, Buy Ohio, and Veteran-Friendly Businesses in accordance with Ohio Administrative Code. Delivery is required no later than January 15, 2027, under FOB Destination terms. For contractors located within 100 driving miles of the Castalia facility, the ODNR will handle pickup; otherwise, the contractor is responsible for delivery. All submissions must be made electronically through the Ohio Buys portal. Standard state terms apply, including requirements for independent contractor status, compliance with equal employment opportunity laws, and adherence to offshore service restrictions. Payment is due within 30 calendar days of the receipt of a proper invoice, with electronic funds transfer being the preferred method.

Dnr750784 Castalia State Fish Hatchery Dnreri

POSTED

DEADLINE

CFA-686 Carbon-based Fuels Capability - CO2 Storage Vessel

Solicitation # INL-26-056

Battelle Energy Alliance, LLC, acting as the Management and Operating Contractor for the Department of Energy owned Idaho National Laboratory, is seeking Expressions of Interest for the design, fabrication, testing, and inspection of a CO2 storage pressure vessel, designated V-738. This vessel is intended for the Central Facilities Area Carbon-based Fuels Capability and must be a 200 cubic foot, ASME BPVC Section VIII, Division 1 code U stamped vessel constructed from 304/304L stainless steel. Technical specifications include a design pressure of 1,800 psig, a temperature range of -40 to 500 degrees Fahrenheit, a 36-inch inner diameter, and an overall shell length of 26 feet 3.5 inches. The horizontal vessel will feature seven nozzles, nine band heating elements, and Foamglas insulation with aluminum sheathing, designed to withstand high desert environmental conditions and specific static, seismic, and wind loadings. The procurement process begins with this pre-qualification phase to identify qualified vendors, with selected firms invited to submit detailed technical and price proposals via a subsequent Request for Proposal. The final award will be a firm-fixed price contract with a total performance duration of 28 weeks after receipt of order, covering everything from initial ASME design to final delivery and documentation. Qualified offerors must demonstrate a current U stamp certificate, expertise in stainless steel welding with 100 percent radiography, and the ability to maintain a Quality Control System consistent with ASME BPVC Section VIII Division 1 Mandatory Appendices 10 and 47. Expressions of interest, limited to five pages, are due by October 16, 2026.

Battelle Energy Alliance–doe Cntr

POSTED

DEADLINE

RFQ - Design Build – McCallum Replacement Diesel Tank

Solicitation # 109259 MG

Newfoundland Labrador Hydro has issued a Request for Quotation (RFQ 109259 MG) for the design-build replacement of a diesel storage tank at the McCallum Diesel Plant in Newfoundland and Labrador. The project involves the decommissioning and removal of an existing 90,000L vertical tank and the design, fabrication, and installation of two new 12,000L horizontal diesel tanks with a shared steel support platform, totaling a 24,000L capacity. The work is expected to take approximately 12 months, with a required completion date no later than August 31, 2027. The scope includes site services, engineering support, and ensuring operational continuity by transferring clean fuel into temporary storage during construction. All designs must be authenticated and stamped by a professional engineer as per PEG-NL standards. The contract will be awarded to the top-ranked respondent based on a combined score of non-price rated criteria and pricing, with a total weighting of 100 points. Non-price evaluation focuses on construction and design experience, specifically prioritizing contractors with expertise in remote communities, diesel tanks, and coastal environments. Pricing accounts for 70% of the total score and is evaluated using a relative formula. Mandatory requirements include ISNetworld (ISN) registration with a minimum grade of B, compliance with Bill S-211 regarding forced and child labour, and the submission of a detailed construction schedule. Bidders must also adhere to strict quality assurance protocols; while fabrication facilities are expected to be ISO 9001 certified, a bidder's own QA program is an acceptable alternative if submitted with the bid. Submissions must be uploaded via the specified electronic bidding portal by the deadline of October 7, 2026.

Newfoundland Labrador Hydro

POSTED

DEADLINE

MEVE - 14959 - Paint Morefield TankThe Department of the Interior is forecasting a contract for the repair and repainting of a 300,000 gallon domestic water tank located at the main Morefield visitor use area. This project falls under NAICS code 332420 and is intended to maintain critical water infrastructure for the site. The opportunity was posted on September 2, 2026, and is currently listed as a forecast. Amanda McCutcheon serves as the primary point of contact, with additional support provided by the National Park Service Contract Support Center.

POSTED

DEADLINE

To Procure 1 each of a Hydrogen Tank for CHUAS site in the Upper Air Program

POSTED

DEADLINE

To Procure 4 total HOGEN tanks for He to H2 conversion for the Upper Air Program.

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

This subcontract involves the fabrication and structural installation of a heavy-duty dump body with a capacity of 12 cubic yards. The project requires the use of AR-450 steel and encompasses all necessary welding, as well as the full integration of the body with the vehicle chassis and hydraulic systems. Managed by the Louisiana Procurement agency under NAICS code 332420, the solicitation was posted on August 13, 2026. Interested parties must submit their responses by the deadline of September 3, 2026, at 4:00 PM.

General Info

Fabrication and installation of 12 cubic yard AR-450 dump body by September 3, 2026.

Agency

Louisiana → Procurement

NAICS

332420 - Metal Tank (Heavy Gauge) Manufacturing

Place of Performance

LA, USA

Set-Aside

NONE

Documents

This scope was carved out of 3000026613.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

A-26-021 - Snow Plow Dump Trucks - DOTD

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 13

subcontract

Response DeadlineSep 3

Deadline has passed

Submission Closed

09/03/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyLouisiana → Procurement

ContactsNo contacts available

OfficeN/A

Organization / AgencyLouisiana → Procurement

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and structural installation of a 12 cubic yard dump body from AR-450 steel, including welding and integration with chassis and hydraulics.