Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Fabrication and Supply of Hot Rolled Carbon Steel Plates

Active

Federal

Response Deadline11/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and supply of 128 hot rolled carbon steel plates for prime contractors supporting Defense Logistics Agency contracts. The plates must be cut to precise dimensions of 0.250 inches by 48 inches by 96 inches in accordance with ASTM A6/A6M-24B standards, though test coupons are not required. The contractor is responsible for ensuring all shipments include Mill-Material Certification and adhere to strict identification and packaging guidelines. Specifically, markings must comply with MIL-STD-129, while packing must follow ASTM A700 and MIL-STD-2073-1E. This requirement falls under NAICS code 332312 for the Department of Defense.

General Info

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8E9-27-T-0414.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLATE, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies hot rolled carbon steel plates for prime contractors delivering DLA supply contracts. Cuts steel to exact dimensions of 0.250" x 48" x 96" per ASTM A6/A6M-24B without test coupons. Applies identification markings per MIL-STD-129 and packs per ASTM A700 and MIL-STD-2073-1E. Provides Mill-Material Certification for all shipments. Delivers 128 finished metal plates.

Similar Contracts

Same NAICS industry code

Steel Fabrication SupplyThis subcontract agreement involves the supply and delivery of fabricated structural steel components for prime contractors working on projects for the Fillmore Unified School District in California. The scope of work focuses on providing prefabricated steel materials delivered directly to the designated project sites. Interested parties must maintain standard business licensing to qualify. Additionally, registration with the Department of Industrial Relations is mandatory if the scope of work extends to include the installation of the materials. The solicitation was posted on November 2, 2026, with a response deadline set for November 3, 2027.

Fillmore Unified School District

POSTED

about 7 hours ago

DEADLINE

BABAA-Compliant Construction Material SupplyThis subcontract agreement involves the supply of iron, steel, and manufactured construction materials for prime contractors working on street improvement projects for the Decatur County Board of Commissioners in Georgia. The scope of work specifically includes the provision of drainage pipes, paving aggregates, and roadway base materials, all of which must be delivered directly to the project site. A critical requirement of this contract is the mandatory certification of compliance with the Build America, Buy America Act and OMB Memorandum M-22-11, ensuring that all supplied materials are certified as US-produced. The solicitation was posted on November 2, 2026, with a response deadline set for December 3, 2026.

Decatur County Board of Commissioners

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Structural Steel Fabrication and ErectionThis subcontract for Structural Steel Fabrication and Erection involves the fabrication and installation of structural steel framing for prime contractors working on State of Connecticut facility projects. The scope of work includes the shop fabrication of W-shapes, plates, and angles, as well as field welding and shop priming in accordance with SSPC-SP 3 standards. The final deliverable is a completed structural steel frame. All work must strictly adhere to the AISC Steel Construction Manual and AWS D1.1/D11M specifications. Additionally, the contractor is required to maintain an IAS AC172 fabricator inspection program. This opportunity is managed by DAS Procurement for the State of Connecticut, with a response deadline of December 21, 2026.

DAS Procurement

POSTED

about 9 hours ago

DEADLINE

in about 2 months

Metal Fabrication & Miscellaneous MetalsThis subcontract opportunity through the California Public Works Capital Projects agency involves the fabrication and installation of miscellaneous metal supports and decorative elements for facility projects within the County of San Mateo. The scope of work includes the installation of miscellaneous framing, prefabricated columns, shelf angles, metal ladders, floor plates, elevator pit covers, steel door frames, and bollards. Additionally, the contractor is responsible for fabricating and delivering decorative metal stairs, railings, and formed metal utilizing post-installed concrete anchors. The solicitation is categorized under NAICS code 332312 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of December 10, 2026. This contract is designed for providers capable of supporting prime contractors in delivering comprehensive metal fabrication and installation services for public infrastructure.

Public Works - Capital Projects

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Prefabricated Weathered Steel Truss Bridge ManufacturerThis subcontract opportunity is for the manufacture and delivery of two prefabricated weathered steel connector-style truss recreational bridges for projects managed by the Marin County Open Space District in Fairfax, California. The selected contractor will be responsible for the complete structural design of the superstructure, deck, railings, bearings, and anchorage, ensuring all work is sealed by a California-licensed Civil or Structural Engineer. Compliance with AASHTO LRFD and AWS D1.5M/D1.5:2025 standards is mandatory, and the manufacturer must hold AISC Certification. The scope of work includes both the technical design phase and the physical delivery of the fabricated bridges to the project site. Responses to this solicitation are due by December 3, 2026.

Marin County Open Space District

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Vehicular Component Bracket Supply (NSN 2590-01-699-5314)This subcontract involves the fabrication or procurement of one Vehicular Component Bracket, specifically JCB Inc part number 332/F8270, for the Defense Logistics Agency Weapons Support Land Supply Chain. The contractor must ensure the component adheres to the DLA Master List of Technical and Quality Requirements and is delivered FOB Origin to Fort Riley, Kansas. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act, alongside specific military standards for packaging and marking. Additionally, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171 and DFARS 252.204-7012.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Precision Metal Plate Fabrication (NSN 9515-00-079-8168)

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Special Purpose Combination Wrench SupplierThis subcontract opportunity, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, seeks a supplier to provide 46 units of specialized combination wrenches identified by NSN 5120015372582. The contract is designated as a Total Small Business Set-Aside under NAICS code 332312. Qualified vendors must possess a valid UEI and CAGE code to be eligible for consideration. The supplier is responsible for manufacturing or sourcing the wrenches while ensuring strict compliance with the Buy American Act and the Berry Amendment. Additive manufacturing processes are prohibited unless specific approval is granted. Interested parties must submit their responses by November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Nonmetallic Tubing Assembly ManufacturerThis subcontract opportunity with the Defense Logistics Agency involves the manufacture of one nonmetallic tubing assembly for prime contractors. The selected manufacturer must fabricate the assembly in strict accordance with Basic Drawing NR 19207 12497102 and the DLA Master List of Technical and Quality Requirements. Additionally, the contractor is responsible for ensuring that packaging meets ASTM D3951 and RP001 standards and that labeling complies with MIL-STD-129. Compliance with several rigorous security and regulatory frameworks is mandatory, including CMMC Level 2, NIST SP 800-171, and the Buy American Act/Berry Amendment. Interested parties must submit their responses by November 13, 2026, under NAICS code 332312.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Supply of Structural Angle (NSN 9540-01-363-7419)This subcontract involves the procurement or manufacture of 10 feet of certified structural angle under NSN 9540-01-363-7419 for prime contractors working on Defense Logistics Agency Troop Support projects. The material must strictly adhere to technical specifications including ASTM B124, ASTM B660-23, ASTM B666/B666M-20, and SAE AMS-QQ-A-200/11A and 200C. Packaging and marking must comply with ASTM D3951, RP001, and MIL-STD-129 standards. The contractor is required to provide official metal certification and ensure full compliance with the Buy American Act and the Berry Amendment. This opportunity falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Supply of Mounting Brackets (NSN 5340015763028)This subcontract, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, requires the manufacture or procurement of 17 specialized mounting brackets conforming to NSN 5340015763028. The contractor must ensure all units meet strict DLA Technical and Quality requirements, with specific adherence to ASTM D3951 or IP025 for packaging, MIL-STD-129 for marking, and RP001 for palletization. Delivery of the completed and labeled brackets is required on a FOB Origin basis. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 17, 2026, to support prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

Supply of Metal Plate (P/N: LTA-A05-193-001)This subcontract through the Defense Logistics Agency involves the procurement and delivery of one specific metal plate, part number LTA-A05-193-001 and NSN 9515-66-149-2067. The component must be compatible with Thales Australia Bendigo Land and Joint Systems and is intended for prime contractors fulfilling DLA supply contracts. The item is to be delivered FOB Destination to Fort Riley, Kansas. The contractor must adhere to strict military standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider must ensure full compliance with the Buy American Act and DLA RA001 requirements. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026, under NAICS code 332312.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Femoral Fracture Splints (CT-6)This subcontract involves the supply of specialized CT-6 femoral fracture splints for prime contractors operating under Defense Logistics Agency Troop Support medical supply contracts. The required units must be constructed from black matt carbon fiber to ensure they are temperature-stable, corrosion-resistant, and designed for minimal radar reflectivity. All materials must be marked in strict accordance with Medical Marking Standard No. 1. The scope of work specifically requires the delivery of one leg splint unit under NSN 6515015215730. This procurement falls under NAICS code 339113 and is managed by the Department of Defense. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

Intraosseous Infusion System Fast 1 SupplyThis subcontract involves the supply of the Intraosseous Infusion System Fast 1 for prime contractors delivering to the Defense Logistics Agency. The scope of work requires the provision of complete kits consisting of Luer connectors, introducers, and stainless steel bone portal tips. All delivered systems must be shipped FOB Destination and adhere to strict quality standards, including a minimum shelf life of 18 months and packaging that complies with Medical Marking Standard No. 1 and MIL-STD-2073-1E. The contract mandates full compliance with the Berry Amendment and the Buy American Act. Classified under NAICS code 423450, the opportunity was posted on November 2, 2026, with a response deadline of November 9, 2026. The primary agency overseeing the requirement is the Department of Defense through the Defense Logistics Agency.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Supply of Brake Components (P/N B11503)

POSTED

about 12 hours ago

DEADLINE

Electric Brake Assembly Fabrication (NSN 6110-01-143-2012)

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Precision Check Valves (NSN 4820-01-348-6202)This subcontract involves the manufacture and supply of two precision check valves meeting NSN 4820-01-348-6202 specifications for prime contractors supporting the Naval Nuclear Lab via the Defense Logistics Agency. The production process must strictly avoid additive manufacturing and adhere to the Berry Amendment and Buy American Act. Performance will take place in Schenectady, New York, under NAICS code 332912. The selected provider must maintain SAE AS9003 or ISO 9001 certification and have access to the US/Canada Joint Certification Program. Additionally, all deliverables must comply with DLA Packaging RP001 and Quality RA001 requirements. Responses to this solicitation are due by November 13, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of LEVER (FPC) - NSN 1560LLQJ59653This subcontract involves the procurement of nine LEVER (FPC) hardware units for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for manufacturing or sourcing these components in strict accordance with NSN 1560LLQJ59653 and the DLA Master List of Technical and Quality Requirements. The contract falls under NAICS code 332510 and mandates full compliance with DFARS 252.204-7016 concerning the use of prohibited telecommunications equipment. The solicitation was posted on November 2, 2026, with a response deadline set for November 10, 2026.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Disposable Nitrile Glove Kit SupplierThis subcontract involves the supply of textured nitrile rubber glove kits for prime contractors supporting Defense Logistics Agency Troop Support medical supply contracts. The manufacturer is required to produce sand-colored gloves in size large, featuring a length of 11.8 inches and specific thickness measurements of 8 mil at the fingertips, 6 mil at the palm, and 4.7 mil at the cuff. The scope of work includes the delivery of three packages of NSN 8415-01-600-0262 kits. Each kit must contain 25 individually wrapped pairs and adhere strictly to Medical Marking Standard No. 1 and RP001 palletization standards. The supplier must ensure full compliance with the Buy American Act. This procurement falls under NAICS code 339113 and is managed through the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for 21 units of fragile and hazardous marine electronic components. The contractor is responsible for ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 standards, specifically executing Preservation Method 10 and Cleaning/Drying 1. Due to the nature of the materials, the provider must hold a valid HAZMAT shipping certification. The scope of work concludes with the delivery of the units packaged, marked, and crated for FOB Origin shipment. This requirement falls under NAICS code 561910, with a response deadline set for November 10, 2026.

Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Marine Navigational Lights (NSN 6220-01-211-7019)This subcontract involves the manufacture and supply of 21 Marine Navigational Lights, specifically part number M24560/9-001, for prime contractors supporting the Defense Logistics Agency. The units must be produced in strict accordance with MIL-L-24560/9B Revision B and MIL-DTL-24560A SUP 1 specifications. To ensure operational readiness and quality, the provider is required to perform First Article Testing and maintain a quality management system certified under either SAE AS9003 or ISO 9001. Compliance requirements for this engagement include adherence to the Buy American Act and NIST SP 800-171 standards for data security. The project falls under NAICS code 334511 and is managed through the Department of Defense. Interested parties must note the response deadline of November 10, 2026, to meet the procurement timeline for these critical navigational components.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of 2-Part Adhesive Kits (NSN 8040-01-354-1934)This subcontract involves the supply of 12 specialized 2-part adhesive kits, specifically 3M part numbers 3535 A/B or EC3535 A/B, for prime contractors supporting Defense Logistics Agency Troop Support contracts. Each kit must contain one ounce of adhesive and one ounce of catalyst. To ensure product viability, the supplier must strictly adhere to a TYPE I (CODE K) non-extendable shelf life of 18 months. Eligible providers must hold authorized distributor or manufacturer status. The procurement falls under NAICS code 423610 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Fabrication of Mounting Bracket (NSN 5340-01-576-2269)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN: 5340012597861)

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E9-27-T-0416

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

SUPPORT, STRUCTURAL

Solicitation # SPE4A1-26-T-2244

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Protective Enclosure Fabrication and Assembly

Nuwc Division Newport

POSTED

about 17 hours ago

DEADLINE

Marine Welding and Structural Repair

POSTED

about 17 hours ago

DEADLINE

ADA Water Cooler Supply

260-NETWORK Contract Office 20 (36C260)

POSTED

about 17 hours ago

DEADLINE

Custom Steel Fabrication & Welding (Body Construction)

Csa Intermountain 4 Usda-Fs

POSTED

about 17 hours ago

DEADLINE

Structural Steel Fabrication & Erection

Navfacsyscom Mid-Atlantic

POSTED

about 17 hours ago

DEADLINE

in about 2 months

ASTM Certified Steel Fabricator (Plates, Ladders, and Hardware)

W074 Endist Jacksnvlle

POSTED

about 17 hours ago

DEADLINE

Brush Guard Fabrication and Installation

FA8556 Aflcmc Ebuk

POSTED

about 17 hours ago

DEADLINE

High-Capacity Load Frame & Table Fabrication

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS