Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Welding and Structural Repair

Active

Federal

Response Deadline12/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine Welding and Structural Repair involves providing general welding, fabrication, and structural repair services for prime contractors on USCG vessel projects. The scope of work includes brazing, plate renewal, crack repair, and overlay in accordance with Coast Guard Drawing FL-85-002 and SFLC Std Spec 0740, as well as surface preservation per SFLC Std Spec 6310. The contractor is responsible for delivering repaired hull plating and fabricated components and must maintain all necessary welding certifications and procedures. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332312. The work will be performed in San Francisco, California. Interested parties must submit their responses by the deadline of December 2, 2026.

General Info

Small business subcontract for USCG vessel welding and structural repairs in San Francisco.

Agency

Department Of Homeland Security → CG-SEA-C23

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

San Francisco, CA, 94130, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0327QSBPL0001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C23

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C23

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs general welding, fabrication, and structural repairs for prime contractors on USCG vessel projects. Executes fabrication, brazing, plate renewal, crack repair, and overlay per Coast Guard Drawing FL-85-002 and SFLC Std Spec 0740. Performs touch-up preservation of surfaces per SFLC Std Spec 6310. Requires welding certifications and procedures. Delivers repaired hull plating and fabricated components.

Similar Contracts

Same NAICS industry code

Supply of Metal Plate (P/N: LTA-A05-193-001)

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Supply of Multiple Angle Brackets (NSN 5340-01-612-8547)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Gas Cylinder and Dispensing Equipment SupplyThis subcontract for Gas Cylinder and Dispensing Equipment Supply supports prime contractors on State of Ohio procurement projects managed by Administrative Services and State Agencies. The scope of work involves the supply and maintenance of gas storage and dispensing hardware, specifically focusing on portable carry-all units and liquid oxygen containers with a capacity of 30 liters or more, equipped with wheels and gauges. All provided equipment must adhere to strict safety and industry standards, including DOT manufacturing regulations and the use of CGA standard fittings. The provider is responsible for delivering leased or sold cylinders and hardware that are in good working condition and free of leaks. The solicitation was posted on November 2, 2026, with a response deadline of November 23, 2026.

Administrative Services, State Agencies

POSTED

about 4 hours ago

DEADLINE

Metal Fabrication for HandrailsThis subcontract for the City of Fairlawn in Ohio involves the fabrication and installation of handrails and stair posts for roadway projects. The selected contractor will work with prime contractors to produce 1.5 inch diameter pipe using either ASTM A 53 steel or ASTM B241 aluminum, with a requirement that all steel components undergo galvanizing. The project falls under NAICS code 332312 and requires the delivery of fully installed galvanized steel or aluminum components. Interested parties must submit their responses by November 9, 2026, at 3:00 PM.

City of Fairlawn

POSTED

about 6 hours ago

DEADLINE

Specialized Welding ServicesThis subcontract for Specialized Welding Services involves performing certified welding for structural components on Caltrans highway projects located in Leggett, Mendocino County. The selected contractor will be responsible for executing welding operations in strict accordance with Division II, Section 11, to deliver certified welded joints and structures for prime contractors. Eligible providers must employ welders with AWS or equivalent certifications. The solicitation was posted on November 2, 2026, with a response deadline of December 10, 2026. This opportunity falls under NAICS code 332312 and is managed through the California Department of Transportation.

California Department of Transportation

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Structural Steel Pipe and Pin FabricationThis subcontract for Structural Steel Pipe and Pin Fabrication supports Caltrans highway projects in Redding, California. The selected provider will be responsible for the fabrication and delivery of steel pipes, pipe pin assemblies, and AWS D1.1 Type B headed studs, ensuring all pipes are galvanized and meet ASTM A500, A501, A847, and A1085 standards. A critical requirement of this contract is strict adherence to Buy America compliance, mandating that all steel be melted and manufactured within the United States. Interested parties must submit their responses by December 17, 2026, to provide these essential components to the prime contractors.

Department of Transportation

POSTED

about 8 hours ago

DEADLINE

in about 2 months

Structural Steel and Metal FabricationsThis subcontract opportunity involves the fabrication and installation of structural steel framing, steel decking, and miscellaneous metal fabrications for prime contractors working on County of Santa Clara facility projects in Gilroy, California. The scope of work includes the shop fabrication and field erection of wide flange beams, channels, and angles, with a final delivery of the fully installed structural steel frame and associated metal components. All work must adhere to strict industry standards, including welding per AWS D1.1 and AWS D1.8, and full compliance with AISC 303, 360, and ANSI/AISC 341. Interested parties must submit their responses by the deadline of December 7, 2026.

County of Santa Clara

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Galvanized Steel Marker (U-Channel) Post ManufacturingThis subcontract with MoDOT Transportation involves the manufacturing and supply of galvanized steel U-channel marker posts for prime contractors working on Missouri highway projects. The scope of work includes the production of 3 lb Heavy Channel posts in lengths ranging from 6 to 16 feet and 1.12 lb Light Channel posts in 6 and 7 foot lengths. All products must strictly adhere to MoDOT Specifications MGS-92-02G and MGS-05-02A and maintain full Buy American compliance. The selected provider is responsible for delivering the posts in bundles via flatbed transport directly to MoDOT maintenance facilities. This opportunity falls under NAICS code 332312, with a response deadline set for November 16, 2026.

MODOT TRANSPORTATION

POSTED

about 14 hours ago

DEADLINE

Perforated Square Steel Tube (PSST) Post ManufacturingThis subcontract involves the manufacturing and supply of Perforated Square Steel Tube posts for prime contractors working on Missouri Department of Transportation highway projects. The scope of work includes the production of 2 inch by 2 inch posts in 12, 14, and 16 foot lengths, as well as 2.5 inch posts and 7 gauge 3 inch by 3 inch anchors in 36 and 48 inch lengths. All materials are required to adhere to MoDOT Specification MGS-03-04H and maintain Buy American compliance. The selected provider will be responsible for delivering the posts in bundles via flatbed to designated MoDOT maintenance facilities. This opportunity is categorized under NAICS code 332312 and is managed by the Missouri Department of Transportation. Interested parties must submit their responses by the deadline of November 16, 2026.

MODOT TRANSPORTATION

POSTED

about 14 hours ago

DEADLINE

Metal Fabrications and Structural ConnectorsThis subcontract for Metal Fabrications and Structural Connectors involves providing custom metal fabrications and structural hardware to prime contractors working on public works projects for the Village of Youngstown in New York. The scope of work includes the fabrication and delivery of specific steel components to the project site, specifically HDG sill plate anchor bolts, Simpson Strong-Tie holdown anchors, and ASTM A36 steel bearing plates. The opportunity was posted on November 2, 2026, with a response deadline set for January 13, 2027. Classified under NAICS code 332312, the contract focuses on the specialized production and logistical delivery of structural connectors and fabricated steel necessary for municipal infrastructure development.

Village of Youngstown

POSTED

about 15 hours ago

DEADLINE

RFP-GENE-270000000209-1 | Bleachers

Solicitation # RFP-GENE-270000000209-1

The Genesee School District is soliciting bids for the design, engineering, furnishing, and installation of a code-compliant bleacher system at their facility located at 7347 N Genesee Rd, Genesee, MI. The project requires a system consisting of ten rows with a seating capacity of approximately 600 spectators, including all necessary structural framing, seating, aisles, guardrails, and anchorage. The scope of work encompasses all labor, materials, and supervision, with a mandatory completion deadline before the start of the 2027 football season. Bidders must provide a base bid for the complete system, a separate price for the demolition and disposal of existing bleachers, and an alternate price for the construction of a concrete slab including subbase preparation. A press box and site restoration are specifically excluded from this bid package. Proposals must be submitted in duplicate, sealed in opaque envelopes, and delivered to Lurvey Construction by November 16, 2026, at 2:00 PM EST. Submissions must include completed bid forms, pricing, proposed schedules, anticipated lead times, and detailed technical specifications regarding configuration and dimensions. The district will evaluate bids based on the best interest of the owner and reserves the right to reject any or all proposals. Awarded contractors are required to provide signed and sealed engineering drawings and calculations, as well as electronic product data and shop drawings for approval prior to fabrication. Final acceptance is contingent upon the provision of required inspections, testing, manufacturer warranties, and operation and maintenance documentation.

Genesee School District

POSTED

about 15 hours ago

DEADLINE

Supply of Marine Structural Metal Doors (NSN 2040-01-461-1759)This subcontract, set aside for total small businesses under NAICS code 332312, requires the manufacture or procurement of 20 marine structural metal doors meeting NSN 2040-01-461-1759 specifications. The contractor will support prime contractors delivering for the DLA Weapons Support Fluid Handling Division, with the final delivery of the packaged and marked units destined for the USS BATAAN LHD 5. Strict adherence to military standards is required, specifically MIL-STD-129 for marking and MIL-STD-2073-1E and RP001 for packaging. Additionally, the contractor must maintain cybersecurity compliance in accordance with NIST SP 800-171. The response deadline for this opportunity is November 12, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C23

Same awarding agency

Drydocking and Haul-out ServicesThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, seeks a provider of drydocking and haul-out services for USCG vessel projects in San Francisco. The selected contractor will provide the necessary facilities and equipment to lift, block, and relaunch vessels for prime contractors using a drydock, travel lift, or heavy-lift crane. All operations must be performed in accordance with SFLC Standard Specification 8634STD, and the provider must maintain current certification for all lifting equipment and facilities to ensure vessels are safely positioned for repair. This is a total Small Business Set Aside under NAICS code 488410. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. Performance of the contract will take place in San Francisco, zip code 94130.

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

Diesel Fuel Tank CleaningThis subcontract opportunity, issued by the Department of Homeland Security under agency CG-SEA-C23, involves the cleaning and internal inspection of diesel fuel tanks for prime contractors working on USCG vessel projects in San Francisco. The selected provider will be responsible for removing debris and checking for corrosion using specialized tank degreasing equipment and confined space entry gear. All work must culminate in the delivery of cleaned tanks accompanied by a detailed condition report. The project is designated as a total Small Business Set Aside under NAICS code 562910. Due to the nature of the work, personnel are required to hold valid confined space certifications. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

Remediation Services

POSTED

about 8 hours ago

DEADLINE

Marine Piping Inspection and Exhaust RepairThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, involves providing specialized marine piping inspection and exhaust repair services for USCG vessel projects. The scope of work includes the inspection of HVAC piping, cooling systems, and fire/bilge standpipes, as well as the repair of piping from the engine outlet to the through-hull fitting. All work must be performed in accordance with specific Coast Guard Drawings to ensure the delivery of leak-free and fully operational exhaust and cooling systems. The project is designated as a total Small Business Set Aside under NAICS code 238220 and will be performed in San Francisco, California. Interested parties must submit their responses by the deadline of December 2, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

Water Jet Propulsion Maintenance and AlignmentThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, involves the inspection, servicing, and alignment of water jet propulsion units for prime contractors working on USCG vessel projects. The scope of work includes renewing jet drive anodes and aligning Main Diesel Engines to MEPS Generators and Jet Drives in strict accordance with Coast Guard Technical Publication 5737 for Model FF375S. The final deliverable is the provision of fully operational water jet propulsion units, which must be verified through post-repair testing. The project is designated as a Total Small Business Set Aside under NAICS code 336611 and will be performed in San Francisco, California. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

Underwater Body Preservation and CoatingThis subcontract opportunity involves performing complete underwater body surface preservation and coating application for prime contractors working on USCG vessel projects. The scope of work includes executing surface preparation, preservation of the underwater body, and minor coating repairs in accordance with SFLC Std Spec 6310 using marine-grade anti-fouling paints to deliver a fully preserved and coated underwater hull. Managed by the Department of Homeland Security under agency CG-SEA-C23, the project will be performed in San Francisco. This is a total Small Business Set Aside under NAICS code 238320. Qualified bidders must possess SSPC-QP-1 certification or a NACE Inspector. The response deadline for this opportunity is December 2, 2026.

Painting and Wall Covering Contractors

POSTED

about 8 hours ago

DEADLINE

Ultrasonic Testing (UT) ServicesThis subcontract opportunity is for the provision of Ultrasonic Testing (UT) services to support USCG vessel projects under the Department of Homeland Security. The selected contractor will perform ultrasonic thickness measurements for prime contractors to evaluate the integrity of hulls and various components. The scope of work requires the execution of 100 UT shots utilizing specialized equipment in strict accordance with SFLC Standard Specifications 0000 and 0740, culminating in the delivery of a comprehensive measurement report and associated data. The project is designated as a total Small Business Set Aside under NAICS code 541380 and will be performed in San Francisco, California. Interested parties must submit their responses by December 2, 2026. This effort is managed by the CG-SEA-C23 agency office to ensure the structural soundness of maritime assets.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

Solicitation # 70ZU0327QSBPL0001

Solicitation 70ZU0327QSBPL0001 is a combined synopsis and solicitation issued by the Department of Homeland Security for the USCG STA San Francisco to perform FY27 drydock repairs. This HUBZone Small Business Set Aside is a firm-fixed price contract utilizing a lowest price technically acceptable approach. The period of performance is scheduled from April 19, 2027, to July 19, 2027, with work performed in San Francisco, California. The scope of work includes general welding, ultrasonic testing, inspection of hull plating and fendering systems, and 100 percent underwater body preservation. Technical requirements mandate adherence to SFLC Standard Specifications 0000, 0740, 6310, and 8634STD, as well as specific Coast Guard drawings. Award evaluation is based on technical acceptability, fairness and reasonableness of pricing, and a review of past performance via CPARS for three similar projects completed within the last two years. Offerors must provide comprehensive documentation, including a planning document for transportation, welding certifications, and proof of drydock or crane certification. Total evaluated price will include foreseeable costs such as crew travel, lodging, or crane rentals depending on the vendor's proximity to the performance site. Proposals must be submitted electronically to Troy Elliott by December 2, 2026, and must include a signed SF1449, an Excel-based schedule of supplies and services, and required socioeconomic certifications.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

USCG Yard: Sensors and Meters

Solicitation # 70Z04027Q60002Y00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to procure commercial sensors and meters for the USCG Yard in Baltimore, Maryland. The requirement includes specific hardware such as continuous level sensor transmitters, remote flow totalizers, and magnetic level indicators. This is a total small business set-aside under NAICS code 334514. Award will be based on best value, evaluating the vendor's ability to provide the complete requirement, adherence to the required timeframe, and price. Quotes must be emailed to Chelsea Colson by October 6, 2026, at 0700 Eastern, and all vendors must maintain an active SAM.gov registration. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129R. Items must be individually packaged to match the Coast Guard Unit of Issue and clearly labeled with the item name, 13-digit stock number, manufacturer part number, cage code, purchase order number, unit of issue, and quantity. Shipping is required as FOB Destination to the Baltimore facility, with deliveries accepted Monday through Friday between 7:00 AM and 1:00 PM. Invoicing must be processed through the IPP portal with NET 30 payment terms. Additionally, any proposed substitutions require a specification sheet for compatibility evaluation, and access to certain drawings may require registration in the Joint Certification Program due to export controls.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Marine Mounting Hardware & Shims SupplyThis subcontract, titled Marine Mounting Hardware and Shims Supply, involves the provision of mounting plates and marine-grade oak shims for prime contractors working on U.S. Coast Guard vessel projects. Managed by the Department of Homeland Security under agency CG-SEA-C23, the scope of work requires the delivery of 75 linear feet of materials specifically designed for hull leveling and fitting. The opportunity is designated as a total Small Business Set Aside under NAICS code 321999, with performance taking place in Curtis Bay, Maryland. Interested parties must respond by November 16, 2026, following the posting date of October 30, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

CRES (Stainless Steel) Fabrication & SupplyThis subcontract involves the fabrication and supply of Corrosion Resistant Steel securing flat bars for prime contractors working on U.S. Coast Guard vessel projects. The scope of work requires the production of 60 linear feet of 2-1/2 inch by 1/2 inch CRES fender securing flat bars designed to replace damaged or deteriorated hardware, with all materials strictly adhering to CRES specifications for marine environments. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a total Small Business Set Aside under NAICS code 332312. The place of performance is located in Curtis Bay, zip code 21226. The solicitation was posted on October 30, 2026, with a response deadline of November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Marine Fender Installation & Hull WorkThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves the removal and installation of rubber fender systems on a 108 foot Yard Patrol Craft in Curtis Bay. The scope of work requires the removal of existing upper and lower fendering and securing bars, followed by the installation of 24 Type-D black EPDM fenders using new studs, nuts, and washers. The contractor is responsible for conducting visual, probe, and hammer test inspections of the oak shims and mounting plates to ensure structural integrity. The final deliverable is a fully installed and secured rubber fender system across the hull and transom. Responses for this opportunity are due by November 16, 2026.

Ship Building and Repairing

POSTED

DEADLINE

Supply of Magnetic Level IndicatorsThis small business set-aside subcontract, issued by the Department of Homeland Security for the USCG Surface Forces Logistics Center, involves the supply of heavy-duty magnetic level indicators for prime contractors. The required hardware must feature a 1/2 inch 150# raised face slip-on flange per ASME B16.5, a 2 inch SCH 40 chamber pipe, a 316 SST chamber with carbon steel flanges, a titanium float, and orange and black metal flags. Specifically, the equipment must be Orion Instruments model 1E2-AB1A-AACM-NNNNNN1D2AB-030 or an approved equivalent, and all supplies must adhere to MIL-STD-2073-1E and MIL-STD-129R standards. The project is categorized under NAICS code 423830 and will be performed in Curtis Bay, Maryland. Interested parties must submit their responses by the deadline of November 6, 2026. This procurement is managed by agency CG-SEA-C23 and is designated as a total small business set-aside.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Custom Fabrication of Material Lifting Clamp

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306-00-639-8810)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Vehicular Component Brackets (NSN 2590015266520)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Metal Bar Supply (NSN 9510002886218)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Nonmetallic Hose Assembly Fabrication (NSN 4720-01-501-0562)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-01-718-9188)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fabrication of Angle Brackets

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Access Covers (NSN 5340-01-701-9739)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306-01-096-5598)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fabrication and Supply of Ammunition Stowage Racks

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture and Supply of Mechanical Drive Guard

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS