Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Diesel Fuel Tank Cleaning

Active

Federal

Response Deadline12/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, issued by the Department of Homeland Security under agency CG-SEA-C23, involves the cleaning and internal inspection of diesel fuel tanks for prime contractors working on USCG vessel projects in San Francisco. The selected provider will be responsible for removing debris and checking for corrosion using specialized tank degreasing equipment and confined space entry gear. All work must culminate in the delivery of cleaned tanks accompanied by a detailed condition report. The project is designated as a total Small Business Set Aside under NAICS code 562910. Due to the nature of the work, personnel are required to hold valid confined space certifications. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

General Info

DHS subcontract for USCG diesel fuel tank cleaning and inspection in San Francisco.

Agency

Department Of Homeland Security → CG-SEA-C23

NAICS

562910 - Remediation Services

Place of Performance

San Francisco, CA, 94130, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0327QSBPL0001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C23

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C23

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs cleaning and internal inspection of diesel fuel tanks for prime contractors on USCG vessel projects. Cleans fuel tanks and inspects for corrosion or debris using tank degreasing equipment and confined space entry gear. Requires confined space certification. Delivers cleaned and inspected fuel tanks with a condition report.

Similar Contracts

Same NAICS industry code

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at the Atterbury Job Corps Center Theatre Building 1086 in Edinburgh, Indiana. The project was necessitated by a sprinkler system failure and requires the remediation of the entire building, including cleaning visible mold and algae from concrete floors, CMU walls, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. All work must be performed in accordance with EPA guidelines and the ANSI/IICRC S520 Standard for Professional Mold Remediation, utilizing a Certified Industrial Hygienist to verify materials and conduct final clearance walkthroughs. The contractor is also responsible for dehumidification to maintain humidity levels at or below 50 percent and must provide a one-year guarantee on all workmanship. This is a small business set-aside opportunity requiring a single lump sum bid. Award decisions will be based on best value, with evaluation weights assigned to price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must provide a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Indiana Contractor's License. Mandatory requirements include compliance with the Davis-Bacon Act wage determinations, adherence to OSHA regulations, and specific insurance coverages, including automobile liability and workers compensation. Proposals must be submitted on official company letterhead and include a completed Vendor Questionnaire, W9, and a minimum 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed.

Atterbury Job Corps Center

POSTED

DEADLINE

Specialized Environmental Cleanup (Freon, Oil, and Duct Cleaning)This subcontract opportunity involves providing specialized environmental cleanup services for prime contractors working on California Department of Water Resources projects, specifically in Byron, California. The scope of work includes the recovery and recycling of Freon, the removal of oil from aqueducts, reservoirs, and lakes, as well as lead remediation and industrial duct cleaning. The successful contractor is responsible for delivering fully cleaned sites and providing all necessary waste disposal records. To qualify for this engagement, personnel must possess HAZWOPER training and EPA Section 608 Certification, and a Class A Engineering License may be required. Interested parties must submit their responses by November 18, 2026, under NAICS code 562910.

Department of Water Resources

POSTED

about 4 hours ago

DEADLINE

Asbestos RemediationThis subcontract for Asbestos Remediation involves the removal of asbestos-containing materials for prime contractors working on facility projects within the Grossmont–Cuyamaca Community College District in El Cajon, California. The selected contractor is responsible for executing the decontamination and removal of hazardous materials under the guidance of a qualified asbestos consultant to ensure the delivery of a certified asbestos-free site. To be eligible, the contractor must hold an EPA Accredited Contractor certification and operate under NAICS code 562910. The solicitation was posted on November 2, 2026, with a response deadline set for November 16, 2026.

Grossmont–Cuyamaca Community College District

POSTED

about 8 hours ago

DEADLINE

Hazardous Material AbatementThis subcontract opportunity with the Department of Veterans Affairs involves hazardous material abatement services for prime contractors at a facility in Shreveport, Louisiana. The scope of work focuses on the identification, containment, and removal of hazardous materials, specifically emphasizing asbestos abatement and lead paint removal. To ensure safety and compliance, the contractor must utilize negative air machines and HEPA filtration systems throughout the process. Qualified bidders must hold valid EPA and OSHA certifications for both asbestos and lead handling. The successful contractor will be responsible for delivering comprehensive certified abatement reports and ensuring a clean-site clearance upon completion. Interested parties should note the response deadline of November 12, 2026, for this project categorized under NAICS code 562910.

POSTED

about 8 hours ago

DEADLINE

F--Mold remediation, Merritt Island NWR

Solicitation # 140FF027Q0053

Solicitation 140FF027Q0053 is a Request for Quotation issued by the U.S. Fish and Wildlife Service for licensed mold remediation services at the Merritt Island National Wildlife Refuge Fire Office in Titusville, Florida. This 100% Small Business Set-Aside is conducted under FAR Parts 12 and 13 as a Firm Fixed Price contract under NAICS code 562910. The scope of work includes the selective removal of mold-contaminated materials from the attic, office wall assemblies, and HVAC components, as well as HVAC cleaning, temporary humidity control, and antimicrobial treatment. All work must be performed by a Florida-licensed mold remediator in accordance with IICRC S520 and EPA guidelines. Notably, the contract explicitly excludes reconstruction, permanent repairs, and finish restoration. The period of performance begins upon award and extends through September 30, 2027. Award will be based on the Lowest Priced Technically Acceptable (LPTA) offer, with the government evaluating the lowest priced quote first for technical acceptability regarding the management approach and key personnel qualifications. Key personnel must demonstrate at least five years of relevant experience. Offerors are required to have active SAM registration and must use the Invoice Processing Platform (IPP) for payments. Submissions must include a price proposal and a technical volume, including a site-specific Health and Safety Plan and past performance documentation. A site visit was scheduled for November 12, 2026, with a final quote submission deadline of November 16, 2026.

Fws Contracting Activity

POSTED

about 8 hours ago

DEADLINE

F--Post-Flood Cleanup and Disaster AbatementSand Is

Solicitation # 140LL027Q0017

The Bureau of Land Management Canyon Country District is seeking quotes for urgent post-flood cleanup and disaster abatement services at the Sand Island Ranger Station, located in a remote area near Bluff, Utah. This total small business set-aside under NAICS 562910 is a firm-fixed unit price contract. The scope of work involves hazard assessment, moisture mapping, standing water removal, muck removal, and the removal of saturated flooring and drywall across four structures: a boat house, visitor contact center, law enforcement office, and a residential unit. Due to high levels of E. coli detected in flood waters, contractors must adhere to strict OSHA standards and provide all necessary personal protective equipment. The period of performance is 30 calendar days from the Notice to Proceed, with work expected to begin within three business days of that notice. Award will be made on a Lowest Price Technically Acceptable basis to a registered SAM.gov vendor who demonstrates a proven technical approach and prior capability in similar abatement work. Quotes must include detailed costs for mobilization, labor, equipment, and debris removal. All payment requests will be processed electronically through the Invoice Processing Platform. Quotes are due by November 4, 2026, at 3:00 p.m. Mountain Time.

Blm Contracting Activity

POSTED

about 8 hours ago

DEADLINE

Erosion Control and Environmental RemediationThis subcontract for Erosion Control and Environmental Remediation supports prime contractors on California Department of Transportation highway projects located in Barstow. The scope of work focuses on stabilizing slopes through the installation of Bonded Fiber Matrix and providing comprehensive hazardous waste management. This includes the specialized packaging and labeling of asbestos materials and treated wood waste in strict accordance with 22 CA Code of Regs to ensure certified disposal. The opportunity is categorized under NAICS code 562910 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of December 3, 2026. The primary objective of the contract is to deliver environmental remediation services that meet state regulatory standards for hazardous material handling and erosion prevention.

California Department of Transportation

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Contaminated Soil Removal and DisposalThis subcontract involves the removal, transport, and legal disposal of contaminated soil for prime contractors working on Los Angeles County Sanitation District No. 2 projects located in Whittier, California. The scope of work includes excavating, stockpiling, and hauling soil to approved off-site facilities, as well as performing structure backfill in accordance with Section 300-3.5 of the Standard Specifications. The selected contractor must possess hazardous material hauling vehicles and the necessary disposal certifications to ensure compliance. Final deliverables for the project include the provision of disposal manifests and a properly backfilled site. Responses for this opportunity are due by December 1, 2026.

Los Angeles County Sanitation District No. 2

POSTED

about 9 hours ago

DEADLINE

Non-Licensed Asbestos Abatement ServicesThis subcontract for Non-Licensed Asbestos Abatement Services involves the identification and removal of non-licensed asbestos materials for prime contractors working on Welwyn Hatfield Borough Council garage projects. The selected provider must ensure all removal activities are conducted in strict accordance with safety regulations, utilizing specialized containment equipment and personal protective equipment to ensure site safety. To qualify for this engagement, contractors must hold current accreditation for non-licensed asbestos removal and provide valid Asbestos Awareness training certification. The scope of work concludes with the certified removal and legal disposal of all identified materials. Interested parties must submit their responses by the deadline of December 11, 2026.

Welwyn Hatfield Borough Council

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Summit Landfill Vegetation Clearing and Groundwater Monitoring Well Installation

Solicitation # 201026

The City of Chattanooga Business Unit in Tennessee is soliciting bids for contract S-25-023, which focuses on vegetation clearing and the installation of groundwater monitoring wells at the Summit Landfill. This state-level project is located within Tennessee and is managed by buyer Daniel Harrigan. The solicitation was posted on November 1, 2026, and requires all responses to be submitted by the deadline of November 24, 2026. Interested parties can access further details and submission guidelines through the provided procurement portal.

City of Chattanooga Business Unit

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials AbatementThis subcontract for Hazardous Materials Abatement involves performing selective demolition and hazardous material remediation for prime contractors on New York Empire State Development airport projects. The scope of work includes asbestos abatement, lead-safe work practices, and the specialized handling and disposal of PCB caulk and other hazardous wastes to deliver a certified clean site ready for construction. Qualified providers must hold licensed asbestos and lead abatement certifications along with the necessary hazardous waste handling permits. The solicitation was posted on November 2, 2026, with a response deadline of November 20, 2026, falling under NAICS code 562910.

POSTED

about 15 hours ago

DEADLINE

Oil Water Separator (OWS) Cleaning and Grit RemovalThis subcontract for the New York State Department of Transportation involves the cleaning and maintenance of Oil Water Separator (OWS) tanks and chambers. The scope of work includes pressure washing pipe inlets from floor drains, removing grit from chambers, and cleaning 1,000 gallon OWS and grit units. Additionally, the contractor is responsible for providing manpower and confined space access to facilitate the installation of coalescing plates and media, with final deliverables consisting of cleaned systems and completed worksheets. Strict adherence to safety regulations is mandatory, specifically OSHA 29CFR1910.146 compliance and NYS DOT Safety Bulletin S8-04-3. The opportunity is categorized under NAICS code 562910, with a response deadline set for December 16, 2026.

NYS Department of Transportation

POSTED

about 15 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Homeland Security → CG-SEA-C23

Same awarding agency

Drydocking and Haul-out ServicesThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, seeks a provider of drydocking and haul-out services for USCG vessel projects in San Francisco. The selected contractor will provide the necessary facilities and equipment to lift, block, and relaunch vessels for prime contractors using a drydock, travel lift, or heavy-lift crane. All operations must be performed in accordance with SFLC Standard Specification 8634STD, and the provider must maintain current certification for all lifting equipment and facilities to ensure vessels are safely positioned for repair. This is a total Small Business Set Aside under NAICS code 488410. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. Performance of the contract will take place in San Francisco, zip code 94130.

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

Marine Piping Inspection and Exhaust RepairThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, involves providing specialized marine piping inspection and exhaust repair services for USCG vessel projects. The scope of work includes the inspection of HVAC piping, cooling systems, and fire/bilge standpipes, as well as the repair of piping from the engine outlet to the through-hull fitting. All work must be performed in accordance with specific Coast Guard Drawings to ensure the delivery of leak-free and fully operational exhaust and cooling systems. The project is designated as a total Small Business Set Aside under NAICS code 238220 and will be performed in San Francisco, California. Interested parties must submit their responses by the deadline of December 2, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

Water Jet Propulsion Maintenance and AlignmentThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, involves the inspection, servicing, and alignment of water jet propulsion units for prime contractors working on USCG vessel projects. The scope of work includes renewing jet drive anodes and aligning Main Diesel Engines to MEPS Generators and Jet Drives in strict accordance with Coast Guard Technical Publication 5737 for Model FF375S. The final deliverable is the provision of fully operational water jet propulsion units, which must be verified through post-repair testing. The project is designated as a Total Small Business Set Aside under NAICS code 336611 and will be performed in San Francisco, California. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

Underwater Body Preservation and CoatingThis subcontract opportunity involves performing complete underwater body surface preservation and coating application for prime contractors working on USCG vessel projects. The scope of work includes executing surface preparation, preservation of the underwater body, and minor coating repairs in accordance with SFLC Std Spec 6310 using marine-grade anti-fouling paints to deliver a fully preserved and coated underwater hull. Managed by the Department of Homeland Security under agency CG-SEA-C23, the project will be performed in San Francisco. This is a total Small Business Set Aside under NAICS code 238320. Qualified bidders must possess SSPC-QP-1 certification or a NACE Inspector. The response deadline for this opportunity is December 2, 2026.

Painting and Wall Covering Contractors

POSTED

about 8 hours ago

DEADLINE

Ultrasonic Testing (UT) ServicesThis subcontract opportunity is for the provision of Ultrasonic Testing (UT) services to support USCG vessel projects under the Department of Homeland Security. The selected contractor will perform ultrasonic thickness measurements for prime contractors to evaluate the integrity of hulls and various components. The scope of work requires the execution of 100 UT shots utilizing specialized equipment in strict accordance with SFLC Standard Specifications 0000 and 0740, culminating in the delivery of a comprehensive measurement report and associated data. The project is designated as a total Small Business Set Aside under NAICS code 541380 and will be performed in San Francisco, California. Interested parties must submit their responses by December 2, 2026. This effort is managed by the CG-SEA-C23 agency office to ensure the structural soundness of maritime assets.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Marine Welding and Structural RepairThis subcontract for Marine Welding and Structural Repair involves providing general welding, fabrication, and structural repair services for prime contractors on USCG vessel projects. The scope of work includes brazing, plate renewal, crack repair, and overlay in accordance with Coast Guard Drawing FL-85-002 and SFLC Std Spec 0740, as well as surface preservation per SFLC Std Spec 6310. The contractor is responsible for delivering repaired hull plating and fabricated components and must maintain all necessary welding certifications and procedures. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332312. The work will be performed in San Francisco, California. Interested parties must submit their responses by the deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

Solicitation # 70ZU0327QSBPL0001

Solicitation 70ZU0327QSBPL0001 is a combined synopsis and solicitation issued by the Department of Homeland Security for the USCG STA San Francisco to perform FY27 drydock repairs. This HUBZone Small Business Set Aside is a firm-fixed price contract utilizing a lowest price technically acceptable approach. The period of performance is scheduled from April 19, 2027, to July 19, 2027, with work performed in San Francisco, California. The scope of work includes general welding, ultrasonic testing, inspection of hull plating and fendering systems, and 100 percent underwater body preservation. Technical requirements mandate adherence to SFLC Standard Specifications 0000, 0740, 6310, and 8634STD, as well as specific Coast Guard drawings. Award evaluation is based on technical acceptability, fairness and reasonableness of pricing, and a review of past performance via CPARS for three similar projects completed within the last two years. Offerors must provide comprehensive documentation, including a planning document for transportation, welding certifications, and proof of drydock or crane certification. Total evaluated price will include foreseeable costs such as crew travel, lodging, or crane rentals depending on the vendor's proximity to the performance site. Proposals must be submitted electronically to Troy Elliott by December 2, 2026, and must include a signed SF1449, an Excel-based schedule of supplies and services, and required socioeconomic certifications.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

USCG Yard: Sensors and Meters

Solicitation # 70Z04027Q60002Y00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to procure commercial sensors and meters for the USCG Yard in Baltimore, Maryland. The requirement includes specific hardware such as continuous level sensor transmitters, remote flow totalizers, and magnetic level indicators. This is a total small business set-aside under NAICS code 334514. Award will be based on best value, evaluating the vendor's ability to provide the complete requirement, adherence to the required timeframe, and price. Quotes must be emailed to Chelsea Colson by October 6, 2026, at 0700 Eastern, and all vendors must maintain an active SAM.gov registration. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129R. Items must be individually packaged to match the Coast Guard Unit of Issue and clearly labeled with the item name, 13-digit stock number, manufacturer part number, cage code, purchase order number, unit of issue, and quantity. Shipping is required as FOB Destination to the Baltimore facility, with deliveries accepted Monday through Friday between 7:00 AM and 1:00 PM. Invoicing must be processed through the IPP portal with NET 30 payment terms. Additionally, any proposed substitutions require a specification sheet for compatibility evaluation, and access to certain drawings may require registration in the Joint Certification Program due to export controls.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Marine Mounting Hardware & Shims SupplyThis subcontract, titled Marine Mounting Hardware and Shims Supply, involves the provision of mounting plates and marine-grade oak shims for prime contractors working on U.S. Coast Guard vessel projects. Managed by the Department of Homeland Security under agency CG-SEA-C23, the scope of work requires the delivery of 75 linear feet of materials specifically designed for hull leveling and fitting. The opportunity is designated as a total Small Business Set Aside under NAICS code 321999, with performance taking place in Curtis Bay, Maryland. Interested parties must respond by November 16, 2026, following the posting date of October 30, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

CRES (Stainless Steel) Fabrication & SupplyThis subcontract involves the fabrication and supply of Corrosion Resistant Steel securing flat bars for prime contractors working on U.S. Coast Guard vessel projects. The scope of work requires the production of 60 linear feet of 2-1/2 inch by 1/2 inch CRES fender securing flat bars designed to replace damaged or deteriorated hardware, with all materials strictly adhering to CRES specifications for marine environments. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a total Small Business Set Aside under NAICS code 332312. The place of performance is located in Curtis Bay, zip code 21226. The solicitation was posted on October 30, 2026, with a response deadline of November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Marine Fender Installation & Hull WorkThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves the removal and installation of rubber fender systems on a 108 foot Yard Patrol Craft in Curtis Bay. The scope of work requires the removal of existing upper and lower fendering and securing bars, followed by the installation of 24 Type-D black EPDM fenders using new studs, nuts, and washers. The contractor is responsible for conducting visual, probe, and hammer test inspections of the oak shims and mounting plates to ensure structural integrity. The final deliverable is a fully installed and secured rubber fender system across the hull and transom. Responses for this opportunity are due by November 16, 2026.

Ship Building and Repairing

POSTED

DEADLINE

Supply of Magnetic Level IndicatorsThis small business set-aside subcontract, issued by the Department of Homeland Security for the USCG Surface Forces Logistics Center, involves the supply of heavy-duty magnetic level indicators for prime contractors. The required hardware must feature a 1/2 inch 150# raised face slip-on flange per ASME B16.5, a 2 inch SCH 40 chamber pipe, a 316 SST chamber with carbon steel flanges, a titanium float, and orange and black metal flags. Specifically, the equipment must be Orion Instruments model 1E2-AB1A-AACM-NNNNNN1D2AB-030 or an approved equivalent, and all supplies must adhere to MIL-STD-2073-1E and MIL-STD-129R standards. The project is categorized under NAICS code 423830 and will be performed in Curtis Bay, Maryland. Interested parties must submit their responses by the deadline of November 6, 2026. This procurement is managed by agency CG-SEA-C23 and is designated as a total small business set-aside.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Precious Metal Recovery from Condemned Avionics

FA8251 Afsc Pzabb

POSTED

DEADLINE

Lead-Based Paint (LBP) Abatement Specialist

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Asbestos Remediation Specialist

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Marine Hazardous Waste Control and Disposal

Southeast Regional Maintenance Center

POSTED

DEADLINE

Water Mitigation and Dehumidification Services

Blm Contracting Activity

POSTED

DEADLINE

Asbestos Abatement

Reclamation Contracting Activity

POSTED

DEADLINE

Hazardous Drug and Biohazard Spill Remediation

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Trauma Cleaning IDIQ

Solicitation # 36C25027Q0070

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

AMENDMENT 0002- FY27 42SFS CATM Range Cleaning

Solicitation # F2X3B26289A001

FA3300 42 Cons Cc

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS