Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Piping Inspection and Exhaust Repair

Active

Federal

Response Deadline12/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, involves providing specialized marine piping inspection and exhaust repair services for USCG vessel projects. The scope of work includes the inspection of HVAC piping, cooling systems, and fire/bilge standpipes, as well as the repair of piping from the engine outlet to the through-hull fitting. All work must be performed in accordance with specific Coast Guard Drawings to ensure the delivery of leak-free and fully operational exhaust and cooling systems. The project is designated as a total Small Business Set Aside under NAICS code 238220 and will be performed in San Francisco, California. Interested parties must submit their responses by the deadline of December 2, 2026.

General Info

DHS subcontract for USCG marine piping inspection and exhaust repairs in San Francisco.

Agency

Department Of Homeland Security → CG-SEA-C23

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

San Francisco, CA, 94130, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0327QSBPL0001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C23

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C23

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs inspection of vessel piping and repairs to engine exhaust systems for prime contractors on USCG vessel projects. Inspects cooling systems, HVAC piping, and fire/bilge standpipes, and repairs piping from engine outlet to through-hull fitting per Coast Guard Drawings 45 RB-M 256-002, 256-004, and 256-101. Delivers leak-free, operational exhaust and cooling piping systems.

Similar Contracts

Same NAICS industry code

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220, and inquiries can be directed to the primary point of contact, Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract under solicitation CBP#9772 to provide comprehensive HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the cleaning of twelve AHUs and twenty-eight heating and cooling coils serving the Kilmer and Edison dormitories, as well as the cleaning of supply, return, and outside-air ductwork and associated air distribution components. The contractor is responsible for all labor, equipment, containment, waste handling, and the installation of necessary access panels. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. Bids are due by November 17, 2026, and will be evaluated based on overall best value. Mandatory requirements for consideration include a physical site visit, a completed pricing schedule, and a bid bond guarantee of 20% for bids exceeding $25,000. Awarded contractors with bids over $25,000 must also provide performance and payment bonds from a surety with at least an A- rating. Compliance with Davis-Bacon prevailing wage determinations for Middlesex County is required. Additionally, subcontractors must provide a Unique Entity Identifier (UEI) and self-certify their business size and socioeconomic status per FAR 52.219-8, while first-tier subcontractors exceeding $45,000 must disclose debarment status per FAR 52.209-6. Final acceptance is contingent upon a Center inspection and the submission of all required operational documentation and warranties.

Edison Job Corps

POSTED

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the ED1 Building of the Sierra Nevada Job Corps Center in Reno, Nevada. The project scope is divided into four phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, and system testing and commissioning. The estimated price range for the project is between 0 and 25,000 dollars. Bids must be submitted using the MTC Bid for Lump Sum Contract form and include a detailed cost breakout on the bidder's letterhead. The deadline for submission is November 17, 2026, by 3:00 PM PST. Award will be based on overall best value, and a physical site visit is mandatory prior to bidding. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid, as well as performance and payment bonds from a surety with at least an A- rating, are required. Contractors must comply with EPA Section 608 regulations for refrigerant recovery and adhere to the specified wage determinations for Washoe County, Nevada. Required insurance includes general liability with a minimum limit of 1,000,000 dollars and worker's compensation with employer's liability limits of at least 500,000 dollars. Final payment is contingent upon a successful final inspection, submission of two sets of operation and maintenance manuals, and the provision of certified payroll reports and lien releases.

Sierra Nevada Job Corps Center

POSTED

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education and Training Resources is seeking quotes for a turnkey subcontracting project to replace multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of eight new units across Buildings A, B, E, F, and G, with capacities ranging from 3.5 to 10 tons. Technical specifications require Energy Star systems, minimum EER ratings of 16 for certain units, 90 percent efficiency furnaces, and the use of R-454B refrigerant. All work must comply with the National Electrical Code, NFPA Standard No. 101, and OSHA regulations. The project requires a 5 to 10 year warranty on parts and a 2 year warranty on workmanship, with final payment contingent upon a signed punch list and performance verification via testing and balancing services. This is a small business set-aside opportunity open to VOSB, SDVOSB, WOSB, and HUBZone certified entities. Interested bidders must provide a current SAM.gov UEI number, active registration, Alabama business licenses, a W-9, and an FFATA form. Submissions must include a completed bid sheet with a detailed cost breakdown, a proposed performance schedule, and certificates of insurance. The Davis-Bacon Act applies, requiring prevailing wages and certified payroll. Bonding requirements are tiered based on project value, requiring a 100 percent payment bond for projects over 35,000 dollars and both performance and payment bonds for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This contract involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the provision of electrical power, control interface connections, chilled water piping, and the final start-up of the equipment. The estimated magnitude of construction for this project is valued between 250,000 and 500,000 dollars, with primary NAICS codes including 238210, 238220, and 238290. Managed by PTSI Managed Services Inc., this solicitation is set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 18, 2026. Denise Buergey serves as the primary point of contact for this procurement effort.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project focuses on eliminating severe piping leaks and preventing air compressor short-cycling within Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation). The scope of work includes the demolition and legal disposal of existing failing compressors and distribution piping, the installation of a new code-approved piping network and properly sized air compressor, and comprehensive operational and leak testing. All work must adhere to NFPA 25 (2023 Edition) and other local, state, and national codes. The awarded contractor must complete all services within 30 consecutive business days following the written Notice to Proceed. Bids are due by December 1, 2026, and must be submitted via email. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. Evaluation is based on overall best value and bidder responsiveness. The contract is subject to prevailing wage requirements per the Davis-Bacon Act and various Federal Acquisition Regulation clauses, including those regarding whistleblower rights, security requirements, and debarment disclosures for first-tier subcontractors exceeding $45,000. Final payment is contingent upon the submission of certified payroll reports, a notice of final completion, and the delivery of operation and maintenance manuals.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four existing 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications using ProPress materials, electrical disconnections and reconnections, insulation, rigging, and the provision of temporary hot water arrangements to ensure the center remains operational. The estimated on-site construction duration is between two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory insurance requirements, Davis-Bacon prevailing wage determinations, and strict center security and safety protocols, including a prohibition on fraternization with students. Required submission documents include a completed vendor questionnaire with UEI and NAICS code, a current W-9, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the replacement of twenty failed ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building in New Mexico. The scope of work includes the removal of damaged units and the installation of Bosch 1-ton units, model RL012-HZC-LLEPAA-GGXXXWX7XXX1XXXXSBA or an equivalent. Additionally, the contractor must install smoke dampers with fusible links in all vents leading into the plenum and ensure all installed plenum materials are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding $100,000.00 require 100% payment and performance bonding upon award. Submissions must include a safety and compliance plan, a detailed cost breakdown for labor and materials, equipment cut sheets, warranty information, and a proposed payment schedule. Proposals are due by November 7, 2026.

Career Systems Development Corporation

POSTED

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the integration of new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 6, 2026.

Exeter Job Corps

POSTED

DEADLINE

WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0

Education & Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work requires the contractor to provide all labor, materials, and equipment to excavate, remove, and repair compromised piping at two specific locations: behind Singletary Hall and on the east side of Harris Hall. Key technical requirements include digging trenches approximately 15 linear feet long and 8 feet deep, performing pipe repairs up to 4 inches in diameter, providing insulation, and backfilling the trenches. The project requires a one-year equipment and workmanship warranty, and final payment is contingent upon a signed punch list and project closeout. Interested bidders must submit their proposals by November 6, 2026, to Garrett Owens. A complete submission must include a detailed bid sheet with a cost breakdown, a proposed service schedule, Massachusetts licensing, certificates of insurance, and a W-9. Winning bidders must possess an active SAM.gov registration and a Unique Entity ID. This solicitation is open to various small business designations, including VOSB, SDVOSB, WOSB, and HUBZone. The contract is subject to federal regulations, including the Davis-Bacon Act or Service Contract Act for prevailing wages, and requires the submission of weekly certified payroll reports. Bonding requirements are tiered based on project value, with payment and performance bonds required for projects exceeding 35,000 dollars.

Westover Job Corps Center

POSTED

DEADLINE

DETROIT JCC-2026-41 – PLUMBING, HEATING, COOLING & ELECTRICAL

Solicitation # detroit-jcc-2026-41-plumbing-heating-cooling-electrical

Serrato Corporation is seeking a licensed contractor to provide ongoing plumbing, heating, cooling, and electrical services for the Detroit Job Corps located at 11801 Woodrow Wilson in Detroit, Michigan. This solicitation, identified as detroit-jcc-2026-41-plumbing-heating-cooling-electrical, falls under NAICS code 238220 and requires a provider capable of maintaining essential facility systems. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of May 31, 2027. Primary coordination for this contract is managed by Toni Robinson.

Serrato Corporation

POSTED

DEADLINE

CBP6729 Cafeteria Dishwasher Replacement

Solicitation # CBP6729

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a commercial conveyor dishwasher at the San Diego Job Corps Center in Imperial Beach, California. The project involves the removal and disposal of an existing Stero STPCW-ER-20 system and the installation of a new commercial-grade system capable of supporting meal service for 600 people, three times daily. The estimated contract value ranges from 25,000 to 100,000 dollars. Bidders must conduct a mandatory physical site visit and submit their proposals by November 9, 2026. Award decisions will be based on overall best value and responsiveness. The contract is subject to strict federal regulations, including Construction Wage Rate Requirements (formerly Davis-Bacon Act), requiring the payment of prevailing wages and the submission of certified payroll reports. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Required submission documents include the MTC Bid for Lump Sum Contract form, a bid breakout, a W-9, and a supplier self-certification form. Additionally, contractors must possess a Unique Entity ID (UEI) for reporting purposes and comply with Buy American and security requirements. Payment is subject to a 10 percent retainage until substantial completion and final acceptance.

San Diego Job Corps Center

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C23

Same awarding agency

Drydocking and Haul-out ServicesThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, seeks a provider of drydocking and haul-out services for USCG vessel projects in San Francisco. The selected contractor will provide the necessary facilities and equipment to lift, block, and relaunch vessels for prime contractors using a drydock, travel lift, or heavy-lift crane. All operations must be performed in accordance with SFLC Standard Specification 8634STD, and the provider must maintain current certification for all lifting equipment and facilities to ensure vessels are safely positioned for repair. This is a total Small Business Set Aside under NAICS code 488410. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. Performance of the contract will take place in San Francisco, zip code 94130.

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

Diesel Fuel Tank CleaningThis subcontract opportunity, issued by the Department of Homeland Security under agency CG-SEA-C23, involves the cleaning and internal inspection of diesel fuel tanks for prime contractors working on USCG vessel projects in San Francisco. The selected provider will be responsible for removing debris and checking for corrosion using specialized tank degreasing equipment and confined space entry gear. All work must culminate in the delivery of cleaned tanks accompanied by a detailed condition report. The project is designated as a total Small Business Set Aside under NAICS code 562910. Due to the nature of the work, personnel are required to hold valid confined space certifications. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

Remediation Services

POSTED

about 8 hours ago

DEADLINE

Water Jet Propulsion Maintenance and AlignmentThis subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C23, involves the inspection, servicing, and alignment of water jet propulsion units for prime contractors working on USCG vessel projects. The scope of work includes renewing jet drive anodes and aligning Main Diesel Engines to MEPS Generators and Jet Drives in strict accordance with Coast Guard Technical Publication 5737 for Model FF375S. The final deliverable is the provision of fully operational water jet propulsion units, which must be verified through post-repair testing. The project is designated as a Total Small Business Set Aside under NAICS code 336611 and will be performed in San Francisco, California. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

Underwater Body Preservation and CoatingThis subcontract opportunity involves performing complete underwater body surface preservation and coating application for prime contractors working on USCG vessel projects. The scope of work includes executing surface preparation, preservation of the underwater body, and minor coating repairs in accordance with SFLC Std Spec 6310 using marine-grade anti-fouling paints to deliver a fully preserved and coated underwater hull. Managed by the Department of Homeland Security under agency CG-SEA-C23, the project will be performed in San Francisco. This is a total Small Business Set Aside under NAICS code 238320. Qualified bidders must possess SSPC-QP-1 certification or a NACE Inspector. The response deadline for this opportunity is December 2, 2026.

Painting and Wall Covering Contractors

POSTED

about 8 hours ago

DEADLINE

Ultrasonic Testing (UT) ServicesThis subcontract opportunity is for the provision of Ultrasonic Testing (UT) services to support USCG vessel projects under the Department of Homeland Security. The selected contractor will perform ultrasonic thickness measurements for prime contractors to evaluate the integrity of hulls and various components. The scope of work requires the execution of 100 UT shots utilizing specialized equipment in strict accordance with SFLC Standard Specifications 0000 and 0740, culminating in the delivery of a comprehensive measurement report and associated data. The project is designated as a total Small Business Set Aside under NAICS code 541380 and will be performed in San Francisco, California. Interested parties must submit their responses by December 2, 2026. This effort is managed by the CG-SEA-C23 agency office to ensure the structural soundness of maritime assets.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Marine Welding and Structural RepairThis subcontract for Marine Welding and Structural Repair involves providing general welding, fabrication, and structural repair services for prime contractors on USCG vessel projects. The scope of work includes brazing, plate renewal, crack repair, and overlay in accordance with Coast Guard Drawing FL-85-002 and SFLC Std Spec 0740, as well as surface preservation per SFLC Std Spec 6310. The contractor is responsible for delivering repaired hull plating and fabricated components and must maintain all necessary welding certifications and procedures. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332312. The work will be performed in San Francisco, California. Interested parties must submit their responses by the deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

Solicitation # 70ZU0327QSBPL0001

Solicitation 70ZU0327QSBPL0001 is a combined synopsis and solicitation issued by the Department of Homeland Security for the USCG STA San Francisco to perform FY27 drydock repairs. This HUBZone Small Business Set Aside is a firm-fixed price contract utilizing a lowest price technically acceptable approach. The period of performance is scheduled from April 19, 2027, to July 19, 2027, with work performed in San Francisco, California. The scope of work includes general welding, ultrasonic testing, inspection of hull plating and fendering systems, and 100 percent underwater body preservation. Technical requirements mandate adherence to SFLC Standard Specifications 0000, 0740, 6310, and 8634STD, as well as specific Coast Guard drawings. Award evaluation is based on technical acceptability, fairness and reasonableness of pricing, and a review of past performance via CPARS for three similar projects completed within the last two years. Offerors must provide comprehensive documentation, including a planning document for transportation, welding certifications, and proof of drydock or crane certification. Total evaluated price will include foreseeable costs such as crew travel, lodging, or crane rentals depending on the vendor's proximity to the performance site. Proposals must be submitted electronically to Troy Elliott by December 2, 2026, and must include a signed SF1449, an Excel-based schedule of supplies and services, and required socioeconomic certifications.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

USCG Yard: Sensors and Meters

Solicitation # 70Z04027Q60002Y00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to procure commercial sensors and meters for the USCG Yard in Baltimore, Maryland. The requirement includes specific hardware such as continuous level sensor transmitters, remote flow totalizers, and magnetic level indicators. This is a total small business set-aside under NAICS code 334514. Award will be based on best value, evaluating the vendor's ability to provide the complete requirement, adherence to the required timeframe, and price. Quotes must be emailed to Chelsea Colson by October 6, 2026, at 0700 Eastern, and all vendors must maintain an active SAM.gov registration. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129R. Items must be individually packaged to match the Coast Guard Unit of Issue and clearly labeled with the item name, 13-digit stock number, manufacturer part number, cage code, purchase order number, unit of issue, and quantity. Shipping is required as FOB Destination to the Baltimore facility, with deliveries accepted Monday through Friday between 7:00 AM and 1:00 PM. Invoicing must be processed through the IPP portal with NET 30 payment terms. Additionally, any proposed substitutions require a specification sheet for compatibility evaluation, and access to certain drawings may require registration in the Joint Certification Program due to export controls.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Marine Mounting Hardware & Shims SupplyThis subcontract, titled Marine Mounting Hardware and Shims Supply, involves the provision of mounting plates and marine-grade oak shims for prime contractors working on U.S. Coast Guard vessel projects. Managed by the Department of Homeland Security under agency CG-SEA-C23, the scope of work requires the delivery of 75 linear feet of materials specifically designed for hull leveling and fitting. The opportunity is designated as a total Small Business Set Aside under NAICS code 321999, with performance taking place in Curtis Bay, Maryland. Interested parties must respond by November 16, 2026, following the posting date of October 30, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

CRES (Stainless Steel) Fabrication & SupplyThis subcontract involves the fabrication and supply of Corrosion Resistant Steel securing flat bars for prime contractors working on U.S. Coast Guard vessel projects. The scope of work requires the production of 60 linear feet of 2-1/2 inch by 1/2 inch CRES fender securing flat bars designed to replace damaged or deteriorated hardware, with all materials strictly adhering to CRES specifications for marine environments. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a total Small Business Set Aside under NAICS code 332312. The place of performance is located in Curtis Bay, zip code 21226. The solicitation was posted on October 30, 2026, with a response deadline of November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Marine Fender Installation & Hull WorkThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves the removal and installation of rubber fender systems on a 108 foot Yard Patrol Craft in Curtis Bay. The scope of work requires the removal of existing upper and lower fendering and securing bars, followed by the installation of 24 Type-D black EPDM fenders using new studs, nuts, and washers. The contractor is responsible for conducting visual, probe, and hammer test inspections of the oak shims and mounting plates to ensure structural integrity. The final deliverable is a fully installed and secured rubber fender system across the hull and transom. Responses for this opportunity are due by November 16, 2026.

Ship Building and Repairing

POSTED

DEADLINE

Supply of Magnetic Level IndicatorsThis small business set-aside subcontract, issued by the Department of Homeland Security for the USCG Surface Forces Logistics Center, involves the supply of heavy-duty magnetic level indicators for prime contractors. The required hardware must feature a 1/2 inch 150# raised face slip-on flange per ASME B16.5, a 2 inch SCH 40 chamber pipe, a 316 SST chamber with carbon steel flanges, a titanium float, and orange and black metal flags. Specifically, the equipment must be Orion Instruments model 1E2-AB1A-AACM-NNNNNN1D2AB-030 or an approved equivalent, and all supplies must adhere to MIL-STD-2073-1E and MIL-STD-129R standards. The project is categorized under NAICS code 423830 and will be performed in Curtis Bay, Maryland. Interested parties must submit their responses by the deadline of November 6, 2026. This procurement is managed by agency CG-SEA-C23 and is designated as a total small business set-aside.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS