This Government Contract opportunity from Government of Canada was posted on September 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fabrication of Low Embodied Carbon Sample Wall Assemblies

Closed

International

Submission Closed10/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238990

New

SLED

Athletic Equipment and FencingThis subcontract opportunity involves the supply and installation of athletic equipment and perimeter security for prime contractors working on municipal projects for the City of Beaumont in Texas. The scope of work specifically includes the installation of pickleball nets, posts, windscreens, and chain link fences and gates, all of which must be completed according to manufacturer specifications. The project falls under NAICS code 238990 and requires the delivery of fully installed fencing and athletic gear. Interested parties should note that the response deadline for this opportunity is December 3, 2026.

POSTED

DEADLINE

Specialized Court SurfacingThis subcontract for Specialized Court Surfacing involves the application of specialized color coating systems for prime contractors working on municipal projects for the City of Beaumont in Texas. The selected contractor is responsible for the delivery, storage, and installation of concrete pickleball court surface color coatings, ensuring all work is performed strictly according to manufacturer instructions. The primary scope of work requires the delivery of six non-slip, color-coated pickleball court surfaces. This opportunity falls under NAICS code 238990, with a response deadline set for December 3, 2026.

POSTED

DEADLINE

Landfill Erosion Control and Slope StabilizationThis subcontract for the City of Savannah focuses on landfill erosion control and slope stabilization. The selected contractor will support prime contractors by installing critical erosion control measures, including silt fences, straw wattles, and erosion control blankets. Additionally, the scope of work involves performing rill repair on landfill slopes and executing hydroseeding operations using specialized hydroseeders and earth-moving equipment to ensure stabilized slopes and effective barriers. To qualify for this project, contractors must hold an Erosion and Sediment Control certification. The opportunity is categorized under NAICS code 238990, with a response deadline set for November 10, 2026. The primary objective is the delivery of fully stabilized slopes and the successful installation of all required erosion control infrastructure.

POSTED

DEADLINE

PURIFIED WATER REPLENISHMENT SAN JACINTO VALLEY ADVANCED WATER PURIFICATION FACILITY SPECIFICATION NO. 1472W

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-specification-0

J.F. Shea Construction, Inc. is requesting sub-bids from qualified Disadvantaged Business Enterprise subcontractors and suppliers for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility project. Located in San Jacinto, California, this solicitation is for the owner, Eastern Municipal Water District, under specification number 1472W. The project encompasses a wide range of construction and supply needs, covering numerous NAICS codes related to heavy and civil engineering, specialty trade contracting, and industrial equipment manufacturing. The opportunity is specifically set aside for various SBA-certified entities, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses, as well as Disadvantaged Business Enterprises. Interested parties must submit their bids by November 17, 2026, at 10:00 A.M. Primary coordination for this solicitation is handled by Lori Olivas.

J.F. Shea Construction, Inc.

POSTED

DEADLINE

CONSTRUCTION MANAGER/GENERAL CONTRACTOR (CM/GC) SERVICES FOR DIRECT POTABLE REUSE DEMONSTRATION FACILITY (PHASE 1) RFQ NO. 3002

Solicitation # construction-managergeneral-contractor-cmgc-services-direct-potable-reuse-demonstration-facility

The Metropolitan Water District of Southern California is seeking qualified subconsultants for the Direct Potable Reuse Demonstration Facility Phase 1 project located in Carson, California. This solicitation is specifically targeting certified MBE, WBE, SBE, DVBE, VOB, and LSA firms to provide Construction Manager/General Contractor services. The project encompasses a wide range of professional and construction activities, as indicated by various NAICS codes including engineering services, construction management, and specialized contracting. Interested subconsultants must submit their bids by October 23, 2026, at 2:00 P.M., ahead of the final owner bid date on November 3, 2026. The procurement process is being managed through J.F. Shea Construction, Inc., with a strong emphasis on SBA certified small businesses, including veteran-owned, women-owned, and HUBZone firms. Primary coordination for this opportunity is handled by Lori Olivas.

J.F. Shea Construction, Inc.

POSTED

DEADLINE

INLAND FEEDER/SAN BERNARDINO VALLEY MUNICIPAL WATER DISTRICT FOOTHILL PUMP STATION INTERTIE, STAGE 1, SPECIFICATIONS NO. 2049

Solicitation # inland-feedersan-bernardino-valley-municipal-water-district-foothill-pump-station-intertie-stage-1-0

The Metropolitan Water District of Southern California is seeking bids for the Inland Feeder/San Bernardino Valley Municipal Water District Foothill Pump Station Intertie, Stage 1 project located in Highland, California. This solicitation, identified by Specifications No. 2049, involves infrastructure work categorized under various NAICS codes, primarily focusing on construction and specialty trade services. Bids for this project are due by October 27, 2026, at 2:00 P.M. This opportunity is designated as an SBA set-aside, specifically targeting certified Veteran Owned Small Businesses, Service-Disabled Veteran Owned Small Businesses, Women-Owned Small Businesses, and HUBZone Small Businesses. J.F. Shea Construction, Inc. is the associated agency for this solicitation, with Lori Olivas serving as the primary point of contact for interested parties.

J.F. Shea Construction, Inc.

POSTED

DEADLINE

On-Call Maintenance and Minor Construction Services

Solicitation # RFP-VC-26-008

The Inland Empire Regional Composting Authority is seeking proposals from licensed general contractors to establish a Master Services Contract for on-call maintenance and minor construction services in California. The scope of work includes millwright work, welding, fire sprinkler system maintenance, general construction such as framing, drywall, and concrete, and the maintenance of conveyors, hoppers, and heavy equipment. The Authority intends to award multiple contracts to qualified providers capable of performing these tasks on short notice. Proposals must be submitted electronically via PlanetBids by October 29, 2026, at 3:00 pm. Evaluation will be based on price and payment terms, the nature of any exceptions taken to the RFP, the firm's experience and performance history, and a detailed proposed work plan. Key requirements include registration with the Department of Industrial Relations and compliance with SB-854 prevailing wage requirements. Contractors must provide performance and payment bonds for any task order exceeding 25,000 dollars and maintain full OSHA compliance. Payment is generally issued within 30 days of invoice approval, though the Authority offers expedited payment options in exchange for a percentage discount. The contract includes a right to audit for up to twelve months after final payment and requires the submission of certified payroll with invoices.

Inland Empire Utilities Agency

POSTED

DEADLINE

Bus Shelter Installation ServicesThis subcontract for Bus Shelter Installation Services involves the physical installation of bus shelters for prime contractors on BFT transit projects. The scope of work includes site preparation, anchoring and securing shelters to sidewalks or ground surfaces, and the installation of amenities and windscreens utilizing specialized leveling and concrete drilling equipment. All work must be completed in strict accordance with local building permits as well as Washington State and Benton County structural codes to ensure the delivery of fully anchored and compliant shelters. The opportunity was posted on October 22, 2026, with a response deadline of December 8, 2026. Classified under NAICS code 238990, the project is managed through the Washington Procurement agency. Interested parties can find further details via the provided OpenGov procurement portal link.

POSTED

DEADLINE

Commercial Locksmithing and Security Hardware InstallationThis subcontract for Commercial Locksmithing and Security Hardware Installation involves providing professional locksmithing services for prime contractors on State of Rhode Island facility projects. The scope of work includes diagnosing locking mechanism failures, performing scheduled maintenance, executing emergency repairs, and installing replacement locking devices. The contractor is responsible for maintaining accurate time logs and ensuring all disturbed areas are restored to their original condition to deliver fully functional locking systems. To be eligible, contractors must hold a Rhode Island Contractor Registration, and OSHA 10-hour certification is mandatory for any projects exceeding 100,000 dollars. The contract falls under NAICS code 238990 and is managed by the State of Rhode Island. Interested parties can find further details through the Rhode Island Division of Procurement.

State of Rhode Island

POSTED

DEADLINE

Roadway Safety and SignageThis subcontract opportunity, titled Roadway Safety and Signage, involves providing specialized installation services for prime contractors working on Illinois State Toll Highway Authority projects. The scope of work focuses on the installation and maintenance of critical roadway safety hardware, including the removal and reinstallation of energy attenuators, the installation of Type T1 and T1-A Traffic Barrier Terminals, and the removal of temporary modular glare screen systems. Additionally, the selected contractor will be responsible for pavement marking, signage updates, and the delivery of all installed safety barriers and signs. Managed by the Engineering and Construction division of the state of Illinois under NAICS code 238990, the solicitation was posted on October 22, 2026. Interested parties must submit their responses by the deadline of December 3, 2026.

ENGCONSTRUCT557 - Engineering - Construction

POSTED

DEADLINE

Bridge Painting and Surface TreatmentThis subcontract for Bridge Painting and Surface Treatment involves providing specialized cleaning and coating services for bridge elements on Illinois State Toll Highway Authority projects. The scope of work includes the management of containment and disposal for non-lead paint cleaning residues, as well as the cleaning and application of protective coats to exposed rebar and structural steel. Managed under the Engineering and Construction agency for the state of Illinois, this opportunity is categorized under NAICS code 238990. Interested parties must submit their responses by the deadline of December 3, 2026.

ENGCONSTRUCT557 - Engineering - Construction

POSTED

DEADLINE

Recycling Equipment Installation ContractorThe Recycling Equipment Installation Contractor subcontract involves the physical installation and integration of material processing and recycling equipment for prime contractors supporting government entities. The scope of work includes unloading equipment, conducting site preparation, and performing mechanical installation, leveling, and anchoring in strict accordance with manufacturer specifications. Contractors are expected to utilize rigging and heavy lifting equipment to deliver a fully operational system. This opportunity is issued by the Chief Procurement Office of General Services for the state of Illinois under NAICS code 238990. The solicitation was posted on October 22, 2026, with a response deadline of November 24, 2026.

CPOGS51001 - Chief Procurement Office Of General Services

POSTED

about 12 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract involves the fabrication of low embodied carbon sample wall assemblies for prime contractors supporting Royal Canadian Mounted Police research projects. The scope of work requires the construction of wood stud frames using 38x96mm studs and 19mm plywood sheathing, with 10 ga recycled steel liners adhered using high-strength silicone adhesives. The contractor must ensure all walls are smooth and free of imperfections, providing photo evidence of the interior construction for approval. The project culminates in the delivery and installation of seven completed sample wall assemblies, designated W23 through W29, at the specified testing facility in Canada. This procurement is managed under the Government of Canada for the RCMP, with a response deadline of October 20, 2026.

General Info

Fabricate and install seven low carbon sample wall assemblies for RCMP research projects.

Agency

Government of Canada → Royal Canadian Mounted Police

NAICS

238990 - All Other Specialty Trade Contractors

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

This scope was carved out of 202702272/A.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Phase III - Construction of Low Embodied Carbon Sample Wall Assemblies

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 21

subcontract

Response DeadlineOct 20

Deadline has passed

Submission Closed

10/20/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Royal Canadian Mounted Police

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Royal Canadian Mounted Police

Office AddressN/A

ContactsNo contact information available

Full Description

Fabricates sample test wall assemblies for prime contractors on RCMP research projects. Constructs wood stud frames using 38x96mm studs, installs 19mm plywood sheathing, and adheres 10 ga recycled steel liners using high-strength silicone adhesives. Ensures walls are smooth and free from imperfections. Provides photo evidence of interior construction for approval. Delivers seven completed sample wall assemblies (W23-W29) installed at the testing facility.