Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Fabrication of Mounting Plate (NSN 1HM 5340-01-415-4666)

Active

Federal

Response Deadline12/04/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of mounting plates under NSN 1HM 5340-01-415-4666 for prime contractors supporting NAVSUP Weapons Systems Support projects. The selected manufacturer must utilize precision machining equipment and hold DPAS certification to produce plates according to specific NAVSEA drawings, including 497A10012 and 8482141. Key deliverables include the manufactured mounting plate units and approved inspection reports. The contractor is responsible for preparing First Article Test/Inspection Reports using DD Form 1423 and implementing Item Unique Identification for all units. This opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

332710 - Machine Shops

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QNA40.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLATE,MOUNTING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineDec 4

Submission deadline

Response Deadline

12/04/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures mounting plates for prime contractors on NAVSUP Weapons Systems Support projects. Fabricates plates based on NAVSEA drawings (including 497A10012 and 8482141), prepares First Article Test/Inspection Reports per DD Form 1423, and implements Item Unique Identification (IUID). Requires precision machining equipment and DPAS certification. Delivers manufactured mounting plate units and approved inspection reports.

Similar Contracts

Same NAICS industry code

Precision Machining of Fluid Valve StemsThis subcontract involves the precision machining of five high-precision fluid valve stems for the Department of Defense, specifically supporting DLA Weapons Support Maritime Hardware projects at the DDSP New Cumberland facility. The selected manufacturer must utilize CNC machining centers to perform precision turning, milling, and grinding to meet the strict tolerances required for NSN 4820-01-355-0268. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems, achieve CMMC Level 2 compliance, and hold US/Canada Joint Certification Program approval. The opportunity was posted on November 4, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332710.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

AC Kit Component ManufacturingThis subcontract involves the manufacture and supply of individual hardware components and sub-assemblies for AC Kit Assemblies, specifically NSN 4130-01-536-1589, to support prime contractors on Department of Defense contracts. All production must strictly adhere to the provided technical data package and the DLA Master List of Technical and Quality Requirements. Deliverables include certified components accompanied by certificates of conformance. The contract is managed through the Barstow Central Receiving Warehouse and requires strict compliance with Berry Amendment domestic sourcing regulations. Notably, the use of additive manufacturing is prohibited for these parts. Interested parties must respond by November 16, 2026, for performance located in Barstow, California.

BARSTOW CENTRAL RECEIVING WHSE

POSTED

about 1 hour ago

DEADLINE

Precision Machining of CRES Valve Nozzles and SeatsThis subcontract involves the precision machining and fabrication of six valve nozzle and seat assemblies, identified by NSN 4820010339208, for the Department of Defense DDSP New Cumberland Facility. The project supports DLA Weapons Support Maritime Hardware/Electrical initiatives and requires the use of CNC lathes and mills to machine Type 304 CRES components to specific dimensions of 2 inches in diameter and 4.625 inches in length. The contractor must strictly adhere to the DLA Master List technical standards and the Buy American Act, ensuring that no mercury compounds are added during the fabrication process. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Manual Control Lever FabricationThis subcontract involves the precision machining, milling, and fabrication of 21 manual control levers for the DLA Weapons Support Land Supply Chain. The project requires the use of CNC milling and turning equipment to produce components that strictly adhere to NSN 5340-01-737-0366 and RA001 technical specifications. Performance of the work will take place in New Cumberland. To be eligible, the contractor must maintain ITAR/EAR compliance, a CMMC Level 2 self-assessment, and certification under the US/Canada Joint Certification Program. The contract falls under NAICS code 332710, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Precision Sleeve Bushing Supplier (NSN 3120-00-661-7348)This subcontract involves the manufacture and supply of 10 precision-machined sleeve bushings, identified by NSN 3120-00-661-7348, for prime contractors supporting the USCG Aviation Logistics Center under the DLA Weapons Support ASC Commodities Division. The production process requires the use of CNC lathes and grinders to meet NAS75 and QAP 13873 standards, with quality assurance conducted in accordance with MIL-STD-1916 or ASQ H1331. The contractor is responsible for ensuring all items are packaged and labeled according to ASTM D3951, RP001, MIL-STD-129, and RQ017 specifications. This requirement falls under NAICS code 332710 and is managed by the Department of Defense, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Machining and Fabrication of Mount Assembly (NSN 1615-01-196-7047)This subcontract involves the precision machining and fabrication of 12 certified flight-critical mount assemblies under NSN 1615-01-196-7047 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing components according to the Sikorsky P/N 70303-03030-047 technical data package and must perform Attribute Single Statistical Acceptance Sampling in accordance with QAP 1201. To qualify for this project, the manufacturer must maintain ISO 9001:2015 and CMMC Level 2 certifications. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 332710. The response deadline for this requirement is November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Machining and Fabrication of Auxiliary AdaptersThis subcontract involves the precision machining and fabrication of two Auxiliary Adapters (NSN 4920-01-114-8526) for the DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will utilize precision CNC equipment to manufacture parts in strict accordance with reference drawing NR 78286 S6470-70062 Revision D. Quality assurance is critical, requiring adherence to zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The opportunity is a total small business set-aside under NAICS code 332710, with performance located in Texarkana, Texas. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The response deadline for this requirement is November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Machining of Mounting Plate ComponentsThis subcontract involves the precision machining of mounting plate components, specifically fabricating metal bases and structural components for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the use of CNC milling and turning equipment to produce parts according to specific technical drawings, including 497A10012, 497A10104, 497A63201, 497A73300, and 497A73301. All deliverables must strictly adhere to TDP Version 006 dimensional tolerances and ISO 9001 quality systems. The contractor is required to use mercury-free materials to ensure the machined metal components are delivered ready for bonding. This effort falls under NAICS code 332710, with a response deadline set for December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Manufacture of Fairlead Covers (P/N 7538383)This subcontract involves the manufacture of 14 Fairlead Covers, part number 7538383, for prime contractors supporting NAVSUP naval hardware projects under the Department of Defense. The production requires the use of precision machining equipment and naval-grade metallurgy to meet strict technical specifications. The final deliverables must be provided in two separate increments of seven units each. Compliance is a critical component of this agreement, requiring adherence to DFARS Buy American standards and the implementation of Item Unique Identification for each unit. Additionally, the manufacturer must support Government Source Inspection to ensure quality control and regulatory alignment. The project falls under NAICS code 332710 and is managed by the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Precision Manufacturing of Quick Disconnect Coupling HalvesThis subcontract involves the precision manufacturing of 175 Quick Disconnect Coupling Halves for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires high-precision CNC machining and fabrication adhering to Technical Data Package Rev C Gen 6 and Air Force Critical Safety Item tolerances, including the delivery of First Article Test units. To qualify, the provider must maintain CMMC Level 2 and DFARS 252.204-7012 compliance, as well as US/Canada Joint Certification Program status for ITAR and EAR controls. The project falls under NAICS code 332710 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supply of Precision Components for Centrifugal Pump AssemblyThis subcontract, managed by the Department of Defense through DLA Mechanicsburg, involves the supply of precision-machined components for centrifugal pump assemblies. The scope of work focuses on the precision casting or machining of pump internals, specifically impellers, casings, and shafts for the NF-4000 CHT Vertical Pump. To ensure quality and compliance, the provider must utilize high-grade alloys and maintain a valid CAGE code. A critical requirement of the agreement is the provision of Mill Test Reports and comprehensive supply chain traceability, tracking all materials from the raw source to the prime contractor. The selected provider is responsible for delivering either the finished machined components or the necessary raw materials directly to the prime manufacturer. The response deadline for this opportunity is December 4, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Precision Machining and Fabrication of Sealing Machine ComponentsThis subcontract involves the precision machining and fabrication of sealing machine components for the Department of Defense under the Navsup Weapon Systems Support Mech agency. The scope of work requires the use of CNC milling and lathes to perform precision machining, milling, and turning of metal components to meet strict tolerances. All fabrication must adhere to TDP Version 003 and the design specifications associated with the reference Cage Code. A critical quality requirement is the guarantee that all materials are entirely free of metallic mercury contamination. The successful contractor is responsible for delivering finished machined components that comply with these technical standards. The opportunity was posted on November 4, 2026, with a response deadline of November 30, 2026, falling under NAICS code 332710.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

OEM Electronic Component Parts SupplierThis subcontract opportunity is for an OEM Electronic Component Parts Supplier to provide original manufacturer parts and sub-assemblies to prime contractors supporting NAVSUP Weapon Systems Support projects. The primary objective is to facilitate the repair of NIIN 015577217 through the delivery of genuine OEM replacement components. To ensure quality and safety, the supplier must provide certification of authenticity and Material Safety Data Sheets that comply with OSHA and FED STD 313 standards. Eligible candidates must hold authorized distributor status and demonstrate full compliance with the Buy American and Trade Agreements acts. This Department of Defense requirement falls under NAICS code 423830. Interested parties must submit their responses by the deadline of November 24, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Electronic Component Repair and Modification ServicesThis subcontract for Electronic Component Repair and Modification Services involves the teardown, evaluation, repair, and modification of electronic components, specifically NIIN 015577217, for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes disassembling components to identify failures, executing repairs according to technical orders and drawings, and conducting testing to ensure OEM specifications are met. The contractor must possess the necessary testing equipment for the specified NIIN and maintain CMMC certification. All repaired components must be identified in accordance with MIL-STD-130 and packaged according to MIL-STD-2073-1. This Department of Defense opportunity falls under NAICS code 811219, with a response deadline of November 24, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 6 hours ago

DEADLINE

SFCC Functional Testing and Certification ServicesThe SFCC Functional Testing and Certification Services subcontract involves providing comprehensive inspection and performance testing for prime contractors on U.S. Navy SFCC projects. The scope of work requires the verification of form, fit, and function for Circuit Card Assemblies to ensure they meet strict system performance specifications. Additionally, the contractor is responsible for conducting traceability audits and producing precise material certification documents in accordance with SFCC protocols and DoDI 5230.24. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, this engagement focuses on the delivery of signed certification reports and detailed inspection results for 16 specific units. The project falls under NAICS code 541380, with a response deadline set for December 4, 2026.

Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Manufacturing of SFCC Circuit Card AssembliesThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the manufacturing and delivery of 16 certified Circuit Card Assemblies (NSN 5998-01-533-4858) for U.S. Navy shipboard system projects. The contractor is required to fabricate the cards according to TDP Version 010 and SFCC/Fly-By-Wire standards, ensuring all units meet strict SFCC certification and 100% traceability marking requirements. Operational compliance includes the implementation of SMIC codes on wrapping and adherence to MIL-STD-2073 and SPI 03950 10167 packaging standards. Due to the nature of the project, the contractor must be eligible to handle export-controlled technical data. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Supply of Specialized Nuts (NSN 5310-01-732-5082)This subcontract involves the manufacture or procurement of 256 specialized nuts for prime contractors supporting US Navy NAVSUP projects. The components must strictly adhere to NSN 5310-01-732-5082 and TDP Version 001 specifications, with a specific requirement that no mercury-containing compounds are added during production. The contractor is responsible for packaging the units according to MIL-STD-2073 and providing a Certificate of Conformance in compliance with FAR 52.246-15. All certified and packaged materials are to be delivered to designated Navy locations. This opportunity is managed under NAICS code 332722 for the Navsup Weapon Systems Support Mech within the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support Mech. The scope of work involves providing specialized military-grade packaging, marking, and palletization to ensure all deliverables are shipping-ready. All activities must strictly adhere to established military standards, specifically MIL-STD-2073 for packaging, MIL-STD-147 for unit load palletization, and MIL-STD-130 for markings. Additionally, the contractor is responsible for implementing electrostatic discharge packaging in accordance with ANSI/ESD S20.20 using approved anti-static materials. This opportunity falls under NAICS code 488510 and was posted on November 4, 2026, with a response deadline of December 3, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

OEM Manufacture of Inertial Measuring Units (NSN 6605-01-495-0012)This subcontract involves the OEM manufacture of Inertial Measuring Units, specifically NSN 6605-01-495-0012, for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The manufacturer is required to produce hardware according to TDP Version O09 and design Cage Code 03956, reference 4300859, ensuring all units are marked in accordance with MIL-STD-130, REV N. Production must take place within ESD control facilities that comply with ANSI/ESD S20.20 and ISO 9001 quality systems. The contract falls under NAICS code 334511, with a response deadline set for December 3, 2026. The final deliverable consists of completed Inertial Measuring units meeting all specified technical and quality standards.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Precision Components for Cylinder Assembly (NIIN 011107355)This subcontract involves the provision of high-tolerance metal components, specialized seals, and raw materials for cylinder assemblies under NIIN 011107355. Supporting prime contractors for the Department of Defense via the Navsup Weapon Systems Support Mech, the supplier must ensure all precision-machined sub-components strictly adhere to Technical Data Package specifications. The agreement mandates strict compliance with DFARS 252.225-7036 Buy American requirements and requires the submission of Material Safety Data Sheets per OSHA and FED STD 313 for any hazardous materials. The procurement process is categorized under NAICS code 334419, with a response deadline set for December 4, 2026.

Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Cylinder Assembly (NIIN 011107355) Fabrication and RepairThis subcontract involves the manufacture or refurbishment of one Cylinder Assembly (NIIN 011107355) for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The scope of work includes the teardown, evaluation, and modification of the assembly in strict accordance with Technical Data Package Version 001, utilizing precision machining and cleaning equipment specialized for aerospace and naval components. The final deliverable is one new or refurbished assembly equipped with an Item Unique Identification. Compliance requirements for this project include authorized access to classified documents as specified by DD Form 254 and adherence to OSHA and FED STD 313 standards for Material Safety Data Sheets. The opportunity is categorized under NAICS code 333242 and is managed by the Department of Defense. Interested parties must respond by December 4, 2026.

Semiconductor Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Supply of Mercury-Free Bonding Materials and ElastomersThis subcontract involves the supply of mercury-free bonding materials and elastomers for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the delivery of high-grade mercury-free epoxy, vulcanizing agents, and vibration damping materials. To ensure compliance and safety, the provider must supply all necessary Material Safety Data Sheets and hazard warning labels to certify that the chemical agents and raw materials are mercury-free. The opportunity is categorized under NAICS code 325211 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026, at 8:30 PM. This contract focuses on the procurement of certified chemical agents essential for specialized defense mechanical projects.

Plastics Material and Resin Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Vulcanization and Epoxy Bonding ServicesThis subcontract for Vulcanization and Epoxy Bonding Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing chemical bonding and curing, specifically executing vulcanization, epoxy bonding, gap filling, and vibration damping applications using specialized epoxy systems and vulcanizing presses. The final deliverable for this engagement is the completed bonded and cured Mounting Plate assembly. To ensure quality and compliance, the contractor must conduct hardness and tensile testing in accordance with MIL-PRF-81733. The contract further mandates strict adherence to process qualification and First Article Testing requirements. Interested parties should note the response deadline of December 4, 2026, for this opportunity categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # PR466526

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 6 hours ago

DEADLINE

CAAA Rapid Acquisition Sustainment Program (RASP) BOA

Solicitation # W519TC-26-R-RASP

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Supplier of Thread Piece, Union (NSN 4730013188542)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Fabrication of Identification Markers (NSN 7690-01-668-5478)

Defense Logistics Agency

POSTED

DEADLINE

Precision Machined Sliding Block (NSN 5340-01-501-6454)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) Prototype Production

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Countersink Cage Assembly Manufacturer/Supplier

Defense Logistics Agency

POSTED

DEADLINE

Supply of Tube Unions (NSN 4730005413612)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Manufacturing of Tube Caps (NSN 4730-01-589-6558)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Mounting Bracket Manufacturer (NSN 5340-01-549-1095)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Fabrication of Catcher Assembly, Grease (NSN 7320-01-044-2709)

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Precision Machining and Fabrication of Cover Housing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS