This Government Contract opportunity from Department Of Commerce was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Factory-Trained On-Site Equipment Maintenance and Calibration

Closed

Federal

Submission Closed05/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

Federal

16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSB48

This sole source procurement, issued by the Navsup Weapon Systems Support under solicitation N0038326QSB48, is for the repair or modification of nine electromechanical actuators identified by NSN 7R-1680-016016127-P8. The delivery terms are set as FOB Origin, and the requirement is restricted to a sole source because the government lacks the necessary technical data to compete the contract. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Applicants who are not currently approved sources must submit all required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposals to be considered. The response deadline for this presolicitation is October 27, 2026, and all inquiries should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

DEADLINE

99--AMPLIFIER,RADIO FRE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RSC27

This sole source requirement under solicitation N0038326RSC27 is for the repair or modification of five radio frequency amplifiers, identified by NSN 0R-0098-LLZ98S324-FX and TDP VER 001. The procurement is issued by the Navsup Weapon Systems Support office in Philadelphia, with delivery terms set as FOB Origin. Due to a lack of sufficient or legible technical data available to the government, this is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements per FAR 52.225-3 and 52.225-5. A critical requirement for award is Government Source Approval; applicants who are not already approved must submit all necessary documentation as outlined in the NAVSUP WSS Source Approval Brochure. Proposals are due by October 27, 2026, and failure to provide the required source approval data will result in the offer not being considered.

Navsup Weapon Systems Support

POSTED

DEADLINE

70--DISPLAY UNIT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RSB54

This sole source presolicitation, issued by the Department of Defense Navsup Weapon Systems Support, is for the repair or modification of 22 display units under NSN 7R-7025-016018116-QF and TDP VER 002. The delivery terms are set as FOB Origin. Due to a lack of sufficient or legible data available to the government, this requirement is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Any entity not already approved must submit the required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposal, as failure to do so will result in disqualification. The response deadline for this opportunity is October 27, 2026, and inquiries should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

DEADLINE

70--DISPLAY UNIT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSB50

This sole source presolicitation, issued by the Navsup Weapon Systems Support under solicitation N0038326QSB50, is for the repair or modification of four display units identified by NSN 7R-7025-016915295-BL and TDP VER 001. The delivery terms are set as FOB Origin. Due to a lack of available technical data to support alternative vendors, this requirement is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Those not currently approved must submit all required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposal, as failure to do so will result in disqualification. The response deadline is October 27, 2026, and inquiries should be directed to Cody P. Cameron. The agreement becomes bilateral upon the government's acceptance of a proposal via mail, facsimile, or electronic commerce.

Navsup Weapon Systems Support

POSTED

DEADLINE

Town Clock Rehabilitation

Solicitation # BD-26-1657-BOS03-BOS03-133342

The Town of Berlin is seeking written quotations from qualified contractors for the rehabilitation of the First Parish Town Clock located at 24 Central Street in Berlin, Massachusetts. The selected contractor will be responsible for providing all necessary labor, materials, equipment, supervision, transportation, rigging, and incidentals required to complete the project. Interested parties must submit sealed general bids to the Town Administrator at 23 Linden Street, Room 206, Berlin, MA 01503. The deadline for submission is September 30, 2026, by 2:00 p.m. local time. This solicitation is identified by bid number 2026-003 and is managed by the primary point of contact, Michael Tusino.

BOS03 - Town of Berlin

POSTED

DEADLINE

Statewide Standby Generator, ATS & UPS Preventive Maintenance Services

Solicitation # BD-27-1107-FREG5-ACCOU-133129

The Massachusetts Trial Court, through the Office of Court Management, Facilities Management & Capital Planning, is soliciting bids for statewide preventive maintenance, inspection, operational testing, load-bank testing, repair, and emergency services for standby generators, automatic transfer switches, and uninterruptible power supply systems. The contract is structured into five independent regional award groups, with each region being awarded to the lowest responsible and eligible bidder. The initial performance period is 32 months, running from November 1, 2026, to June 30, 2029, with two optional one-year renewals available through June 30, 2031. Bidders must submit their response packages electronically via the COMMBUYS portal by September 30, 2026, including a bid deposit of at least 5 percent of the greatest possible bid amount per region. Award evaluation is based on bid responsiveness, eligibility, and the lowest evaluated regional price, with a requirement that contractors demonstrate the capacity to perform in multiple regions simultaneously if awarded more than one. Contractors must adhere to NFPA 70B, the Massachusetts Comprehensive Fire Safety Code, and the Massachusetts Electrical Code, and are required to provide detailed electronic service reports as a condition of payment. Payments are processed via Electronic Funds Transfer through the Comptroller's system, typically 45 days from invoice receipt.

FREG5 - Facilities Management & Capital Planning - Region V

POSTED

DEADLINE

MY700 and MY300 Technical Repair and Maintenance

POSTED

DEADLINE

28V DC and 400 Hz Helo Power Supply Load Testing

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Life Saving, Firefighting & Safety Equipment

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Propulsion & Auxiliary Machinery Maintenance

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Cytiva Chromatography Equipment Preventive Maintenance and Repair

National Institutes Of Health Olao

POSTED

DEADLINE

Omnicell Automated Dispensing System Maintenance

Department Of Veterans Affairs

POSTED

1 day ago

DEADLINE

in 4 days

AI Contract Overview

The contract focuses on providing specialized maintenance, diagnostics, calibration, and repair services for the Cameca IMS1300 LG-SIMS, a sophisticated instrument used for high-resolution chemical analysis at the nanoscale. The goal is to ensure the equipment operates at peak performance, maintaining its precision and reliability for advanced scientific research at NIST. The services will be performed on-site by factory-trained personnel, emphasizing the importance of expert care tailored to the instrument's complex requirements. Issued by the Department of Commerce at NIST, the subcontract falls under the NAICS code 811210, which pertains to equipment maintenance and repair services. The work is located in Gaithersburg, with a response deadline set for May 27, 2026. This contract highlights the critical need for ongoing technical support to preserve the functionality and accuracy of cutting-edge scientific instruments essential for national research infrastructure.

General Info

Specialized maintenance and repair for Cameca IMS1300 LG-SIMS at NIST, performed on-site by experts.

Agency

Department Of Commerce NistView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Gaithersburg, MD, 20899, USA

Set-Aside

NONE

Documents

This scope was carved out of NB643050-26-00728.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Cameca IMS1300 Service Agreement

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 15

subcontract

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Comprehensive maintenance, diagnostics, calibration, and repair of the Cameca IMS1300 LG-SIMS to ensure high-resolution nanometer-scale chemical analysis capabilities at NIST.