Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

FADS Environment Acceptance Testing

Active

Federal

Response Deadline12/10/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the installation and acceptance testing of UDTMR Retrofit Kits for prime contractors supporting US Air Force projects at Robins AFB in Warner Robins, Georgia. The scope of work includes installing powered kits into shells and conducting Government-approved acceptance testing specifically within the Fully Automated Debrief System environment to deliver verified test reports. The project is managed under the Department of Defense, specifically the Aflcmc Waqkb agency. Due to the nature of the work, all personnel are required to possess active Common Access Cards and maintain authorized network access. The solicitation was posted on October 27, 2026, with a response deadline of December 10, 2026.

General Info

Installation and acceptance testing of UDTMR Retrofit Kits for US Air Force projects.

Agency

Department Of Defense → FA8505 Aflcmc Waqkb

NAICS

541330 - Engineering Services

Place of Performance

Warner Robins, GA, 31098, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8505-27-UDTMR.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

F-15 Universal Serial Bus Data Transfer Module Reader (UDTMR) Retrofit Kits

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineDec 10

Submission deadline

Response Deadline

12/10/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8505 Aflcmc Waqkb

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8505 Aflcmc Waqkb

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs installation and acceptance testing of UDTMR Retrofit Kits for prime contractors on US Air Force projects at Robins AFB. Installs powered kits into shells and executes Government-approved acceptance testing within the Fully Automated Debrief System (FADS) environment. Requires personnel with active Common Access Cards (CACs) and authorized network access. Delivers verified acceptance test reports.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, to submit their responses and obtain further solicitation details.

Kiewit Infrastructure West Co.

POSTED

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency across San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations documentation. Interested parties must submit their responses by November 17, 2026. The project falls under several NAICS codes, including 541611, 541330, 541512, and 541820. Primary coordination for this solicitation is handled by Liz Jordan-Wettstein at Aanko Technologies Inc.

Aanko Technologies Inc.

POSTED

DEADLINE

Structural Engineering Services (PE Certified)This subcontract for Structural Engineering Services supports prime contractors on projects for the La Habra Heights County Water District in Whittier, California. The scope of work involves performing structural calculations and anchoring designs specifically for 12-foot diameter vessels and valve tree supports. The selected provider is responsible for creating vessel-specific anchor bolt templates based on provided geotechnical reports. A critical requirement for this contract is that all deliverables, including calculations and templates, must be certified by a Professional Engineer registered in the state of California. Interested parties must submit their responses by November 25, 2026.

La Habra Heights County Water District

POSTED

about 4 hours ago

DEADLINE

Synthetic Environment Generation for AI TrainingThis subcontract for the U.S. Air Force focuses on Synthetic Environment Generation for AI Training, specifically providing high-fidelity synthetic imagery to prime contractors. The scope of work involves creating detailed 3D models of refueling aircraft and simulating various lighting and weather conditions to generate labeled ground-truth datasets. To execute these tasks, the contractor must utilize high-end 3D rendering engines such as Unity or Unreal Engine 5 and ensure strict compliance with DFARS 252.204-7012 security standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026. The final deliverables for this engagement consist of comprehensive labeled synthetic image and video datasets designed to enhance AI training capabilities.

POSTED

about 4 hours ago

DEADLINE

Advanced Thermal Management DesignThe Advanced Thermal Management Design subcontract is a U.S. Air Force project focused on the development of thermal packaging for laser systems. The selected contractor will be responsible for performing thermal modeling and CFD analysis, as well as the fabrication of liquid cooling loops and cold plates utilizing high-thermal-conductivity materials. The primary deliverables include functional thermal management prototypes and validated thermal analysis reports to support prime contractors. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. The solicitation was posted on October 28, 2026, with a response deadline set for November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

BSAC Facility Readiness ContractorThe BSAC Facility Readiness Contractor is a subcontract opportunity under the General Services Administration's PBS Office of Leasing, specifically supporting GSA warehouse lease projects in Kennebunkport, Maine. The primary objective of this contract is to perform critical technical upgrades and finalizations for prime contractors to ensure facilities achieve Beneficial Substantial Asset Completion. Key responsibilities include executing final facility tuning, installing seismic bracing, and implementing energy-efficient upgrades to align with government sustainability and seismic standards. The ultimate goal of the engagement is to secure final BSAC certification and formal government acceptance of the asset. Interested parties should note the response deadline of November 11, 2026.

Pbs Office Of Leasing

POSTED

about 4 hours ago

DEADLINE

Cleaning System Hardware DesignThe Cleaning System Hardware Design subcontract is a U.S. Navy project focused on the design and prototyping of mechanical delivery systems for TDR Tank Level Indicator projects. The selected contractor will be responsible for creating CAD models and developing specialized delivery mechanisms, such as ultrasonic systems or sprayers, specifically engineered for tank environments. To successfully execute the contract, the provider must possess professional CAD software and rapid prototyping equipment to produce final engineering drawings, 3D models, and a functional physical prototype. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 25, 2026. The project supports prime contractors within the U.S. Department of Defense to enhance the hardware capabilities of naval tank monitoring systems.

POSTED

about 4 hours ago

DEADLINE

Hypersonic Aerothermodynamics ConsultantThe Hypersonic Aerothermodynamics Consultant subcontract is a U.S. Air Force project focused on the computational modeling and simulation of non-oxygen based hypersonic ground test environments. The selected contractor will utilize CFD software such as OpenFOAM or ANSYS Fluent on HPC clusters to model gas dynamics and simulate sensor interactions with hypersonic flow fields. Key deliverables include the production of detailed simulation reports and the development of validation models for prime contractors. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the nature of the defense work, the contractor must maintain strict ITAR and EAR compliance and adhere to NIST SP 800-171 and CMMC cybersecurity standards. Responses are due by November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

Cryogenic and Thermal Management EngineeringThis subcontract opportunity with the U.S. Air Force focuses on providing specialized thermal engineering analysis for high-enthalpy ground testing projects. The selected contractor will be responsible for the thermal modeling and design of vacuum jackets and cryogenic cooling interfaces intended to protect imagers from extreme heat environments. Technical execution requires proficiency in ANSYS or COMSOL to produce detailed thermal analysis reports and cooling system design specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

Secure Signal Routing Hardware DesignThe Secure Signal Routing Hardware Design subcontract focuses on the architectural design and schematic development of a secure Input-Output Unit for US Navy shipboard signal projects. The scope of work involves designing circuit topologies for signal isolation and the secure routing of Navigation and HM&E signals, utilizing EDA software to create conceptual diagrams for physical interfaces. Key deliverables include technical feasibility reports and comprehensive hardware design documents. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the handling of Controlled Unclassified Information, contractors must maintain CMMC compliance. Interested parties must submit their responses by November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

Geotechnical Soil Analysis and Pavement RecommendationThis small business set-aside subcontract, issued by the Department of the Interior's Fish and Wildlife Service, requires geotechnical soil analysis and pavement recommendations for various project sites. The selected contractor will perform soil borings at roadway and parking locations using drill rigs and laboratory equipment to determine load-bearing capacity and soil composition. These efforts will culminate in a Geotechnical Engineering Report providing specific recommendations for pavement thickness and sub-base materials. To qualify for this engagement, the contractor must employ a licensed Professional Geologist or Professional Engineer. The opportunity is categorized under NAICS code 541330 and is specifically reserved for small businesses. Interested parties must submit their responses by November 10, 2026.

Fws Contracting Activity

POSTED

about 4 hours ago

DEADLINE

Civil Site Design for Parking and Access RoadsThis small business set-aside subcontract involves providing detailed civil site engineering design for U.S. Fish and Wildlife Service projects. The scope of work focuses on the layout, grading, and drainage of various infrastructure elements, including headquarters and overflow parking, maintenance building access roads, and gravel laydown areas. The selected contractor will be responsible for delivering signed and sealed engineering drawings, technical specifications, and design reports. Technical requirements include proficiency in AutoCAD/Civil 3D and hydraulic modeling software. Additionally, the performing engineer must hold a valid Minnesota Professional Engineer license. This opportunity is categorized under NAICS code 541330 and is managed by the Department of the Interior.

Fws Contracting Activity

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8505 Aflcmc Waqkb

Same awarding agency

Interface Backplate ManufacturingThis subcontract opportunity involves the manufacturing of machined or punched interface backplates for prime contractors supporting US Air Force F-15 UDTMR Retrofit Kit projects. The selected provider will be responsible for precision metal forming, CNC machining, and punching using aerospace-grade alloys and specialized equipment such as CNC mills and punch presses. To ensure quality and compliance with aerospace standards, the contractor must hold either ISO 9001:2015 or AS9100D certification. Managed by the Department of Defense under the FA8505 Aflcmc Waqkb agency, the work will be performed in Warner Robins, Georgia. The solicitation was posted on October 27, 2026, with a response deadline of December 10, 2026. This requirement falls under NAICS code 332710, focusing on the delivery of high-precision interface backplates essential for aircraft retrofit operations.

POSTED

DEADLINE

in about 1 month

Custom Wiring Harness and USB Adapter CablingThis subcontract involves the supply of custom-manufactured wiring harnesses and USB adapter cabling for prime contractors supporting US Air Force F-15 UDTMR Retrofit Kit projects. The scope of work includes custom cable assembly, wiring harness fabrication, and connector integration, utilizing aerospace-grade wiring and specialized connectors. All soldered electrical connections must strictly adhere to J-STD-001 standards to ensure flight safety and reliability. Managed under the Department of Defense through the AFLCMC WAQKB agency, the project is categorized under NAICS code 335931. Performance of the contract will take place in Warner Robins, Georgia. The solicitation was posted on October 27, 2026, with a response deadline set for December 10, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

in about 1 month

PCB Fabrication and SMT AssemblyThis subcontract involves the fabrication of multi-layer printed circuit boards and the execution of Surface Mount Technology assembly for prime contractors supporting US Air Force F-15 UDTMR Retrofit Kit projects. The scope of work includes producing either bare-board or populated Circuit Card Assemblies using electronic components specified in the Bill of Materials. Performance will take place in Warner Robins, Georgia, under the oversight of the Department of Defense. Strict adherence to industry quality and aerospace standards is required, including IPC-A-610 Class 2/3, J-STD-001, ISO 9001:2015, and AS9100D. Additionally, the contractor must maintain compliance with DFARS 252.246-7007 and AS5553. Interested parties must submit their responses by December 10, 2026.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

in about 1 month

F-15 Universal Serial Bus Data Transfer Module Reader (UDTMR) Retrofit Kits

Solicitation # FA8505-27-UDTMR

The United States Air Force is conducting market research via a Request for Information to identify commercial and non-commercial sources capable of manufacturing, assembling, testing, and delivering Universal Data Transfer Module Reader (UDTMR) Retrofit Kits for the F-15 fleet. This high-priority fleet need involves the production of 30 to 40 kits, which include fabricated circuit card assemblies, custom wiring harnesses, machined interface backplates, and USB adapter cabling. All production must meet or exceed the specifications in the government-provided Technical Data Package and adhere to defense electronic assembly standards such as IPC-A-610 Class 2/3, J-STD-001, ISO 9001:2015, and AS9100D. Additionally, contractors must implement counterfeit electronic part avoidance and detection procedures in compliance with DFARS 252.246-7007 and AS5553. A critical requirement for this effort is the ability to perform acceptance testing within the government Fully Automated Debrief System (FADS) environment at Robins AFB, Georgia, or Eglin AFB, Florida. The government specifically seeks sources that can provide personnel who already possess active Common Access Cards (CACs) and current authorization to access the required government network to avoid post-award credentialing delays. The anticipated delivery timeline is aggressive, with a requirement for delivery within three to five months of contract award and a target production turnaround of 60 to 90 calendar days after receipt of order. Responses to this voluntary survey are due by December 10, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

NP2000 Engineering Support and Obsolescence Resolution

FA8538 Afsc Pzaab

POSTED

DEADLINE

Architectural and Engineering Design Services

FA4897 366 Cons Pkp

POSTED

DEADLINE

Architectural and Engineering Design Services

W072 Endist Detroit

POSTED

DEADLINE

Maritime Mooring Analysis Engineering

POSTED

DEADLINE

in about 23 hours

PDB Design & Pre-construction Services

W075 Endist Albuquerque

POSTED

DEADLINE

Architectural & Engineering (A&E) Design Services

W075 Endist Los Angeles

POSTED

DEADLINE

Civil Engineering & Design Services

W2SD Endist Philadelphia

POSTED

DEADLINE

Product Prototyping and Technical Development Services

Veterans Benefits Administration (36C10D)

POSTED

DEADLINE

Non-Reoccurring Engineering (NRE) and Tooling Design

Pnnl Contracts - DOE Contractor

POSTED

DEADLINE

in about 1 month

System Architecture & MBSE Modeling

Nuwc Division Newport

POSTED

DEADLINE

Structural & Seismic Certification

W075 Endist Los Angeles

POSTED

DEADLINE

in about 1 month

Remedial Reporting and Action Plan Updates

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS