Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT

Active
SPE4A7-26-R-X989Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a fairing, launcher, and guided missile aircraft configuration controlled under Lockheed Martin Corporation’s drawing number 16S307, Revision K, with part number 16S307-1, sourced from Alek Industries Inc and Lockheed Martin Corporation. The item is identified by NSN 1440-01-073-2293, with a quantity of one unit, and requires delivery within 230 days after delivery order. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with applicable revisions governed by the solicitation or award date depending on acquisition size. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to export-controlled data is restricted to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled data, and explicit approval from the DLA controlling authority. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification of the item must adhere to bare item marking standards. Configuration changes require formal engineering change proposals, and government identification must be removed from non-accepted supplies. Packaging must conform to DLA procurement requirements. The solicitation, numbered SPE4A7-26-R-X989, was posted on August 5, 2026, with a response deadline of August 13, 2026, and is a total small business set-aside under FAR 19.5. The contracting office is under the Department of Defense, specifically the ASC Supplier Oper AE and AF DIV, with Lamar Olivier designated as the primary point of contact.

General Info

Procurement of one NSN 1440-01-073-2293 fairing and missile system under ITAR/EAR, CMMC Level 2, small business set-aside.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336414 - Guided Missile and Space Vehicle ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE4A726RX989.PDF

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lamar Olivier
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT CONFIGURATION CONTROL IAW: LOCKHEED MARTIN CORPORATION CAGE: 81755 DWG: 16S307, REV. K, 1/18/2000 P/N 16S307-1 IDENTIFY TO: SOURCES: ALEK INDUSTRIES INC CAGE: 65534 LOCKHEED MARTIN CORPORATION CAGE: 81755 TECH DATA:
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1440-01-073-2293 Quantity: 1 EA Delivery: 230 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336414
New
Federal
BrAF Implementation of ECP 4468 for Operational Flight Software
Solicitation # N00019-26-RFPREQ-WPM201-0274
The Naval Air Systems Command, through the Precision Strike Weapons Office, plans to award a Firm Fixed Price Delivery Order to The Boeing Company under Basic Ordering Agreement N00019-26-G-1002 to implement Engineering Change Proposal 4468 for Operational Flight Software Support targeting the Brazilian Air Force. This action is being conducted on a sole source basis because Boeing is the exclusive designer, developer, manufacturer, and integrator of the Harpoon/SLAM ER missile systems and holds proprietary technical knowledge, software, algorithms, facilities, and manufacturing expertise essential to fulfilling the requirements within the required timeline. No other entity possesses the necessary capabilities to meet the government's needs, justifying the use of 10 U.S.C. 2304(c)(1) and FAR 6.302-1 authority. Subcontracting opportunities may be available through direct engagement with Boeing, and all inquiries should be directed to the point of contact provided. The solicitation number is N00019-26-RFPREQ-WPM201-0274, posted on August 4, 2026, with responses due by August 19, 2026, under a presolicitation notice. The work is assigned a NAICS code 336414 and will be performed in St. Louis, Missouri, while the contracting office is located at Patuxent River, Maryland. The primary point of contact is Mason Harrison, with Lindsey Boka as the secondary contact. There is no guarantee of award, and the government is not obligated to proceed with solicitation or make any financial commitments prior to a formal delivery order. Any information provided is subject to change, and no party should incur expenses in anticipation of an award.
Naval Air Systems Command

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336414
New
Federal
Next Generation Counter-Small UAS Missile (NGCM)
Solicitation # PANRSA-26-P-040123
The U.S. Army is seeking industry input on a Next Generation Counter-Small Unmanned Aircraft System Missile (NGCM) to enhance capabilities against Group 2 and Group 3 small drone threats through extended range, rapid launch, and reduced time-to-target. The initiative aims to develop a missile system capable of engaging targets beyond 16 kilometers at 6 kilometers altitude and up to 25 kilometers at 8 kilometers altitude, with a launch response time under five seconds from operator initiation. The missile must integrate seamlessly with the existing Coyote Launcher and compatibility with the IBCS-M architecture and multiple radar systems including KuRFS, Sentinel A3/A4, LTAMDS, PATRIOT, and TPQ-53, using an all-weather RF seeker. Production costs must not exceed $150,000 per unit at a volume of 5,000 missiles, and the system must achieve Technology Readiness Level 7 by the end of FY2027, with 50 units ready for Operational Assessment by the first quarter of FY2028. Development includes full design documentation, simulation tools, and performance analysis to support integration and testing under the Army’s C-UAS architecture. Vendors are invited to submit an unclassified Capabilities Brief, not exceeding ten pages, detailing their proposed solution, technical specifications, integration approach, security compliance, and supporting services such as engineering, field support, training, logistics, data analytics, and cybersecurity. Proposals must demonstrate compliance with NISP standards, including a Secret-level facility clearance and personnel with Secret clearance and COMSEC access, along with adherence to zero-trust and encryption protocols for both U.S. and Foreign Military Sales applications. All submissions must be in PDF format with a one-slide quad chart appendix and must include proper markings for proprietary or sensitive data. Responses are due by August 20, 2026, submitted via email to the designated contracting representatives, with no telephonic inquiries accepted. Participation is voluntary, non-binding, and at the vendor’s expense; the government reserves the right to use responses for planning purposes only and is under no obligation to proceed with procurement. Information submitted becomes government property and may be shared with non-government advisors under NDA, with protections for confidential commercial data under applicable federal statutes.
W6QK Acc-Rsa

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 336414
DIBBS
Aircraft Fairing and Access Door ProductionThe contract pertains to the manufacturing of aerodynamic fairings and access doors for aircraft fuselage or wings, supporting defense aviation systems under a subcontract arrangement. The work falls under NAICS code 336414, which classifies it within the aircraft manufacturing sector, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. Although specific performance locations and point of contact details are not provided, the procurement is tied to a documented award referenced by contract numbers SPE4AX24D9408 and SPE4AX25F9371, indicating an active logistics and supply chain process. The solicitation was posted in July 2026, suggesting a planned future procurement timeline aligned with upcoming aircraft production or modernization needs.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 336414
DIBBS
Pylon and Nozzle Component ManufacturingThe contract pertains to the fabrication of pylon sections and nozzle vanes critical to propulsion or weapon systems, with the work classified under NAICS code 336414 for aerospace product and parts manufacturing. This subcontract falls under the purview of the Defense Logistics Agency, a division of the Department of Defense, and is tied to the procurement effort identified by contract number SPE4AX24D9408 with delivery order SPE4AX25F9371. The nature of the components indicates high-precision manufacturing requirements for defense applications, likely involving advanced materials and stringent quality controls to meet military performance standards. Although specific performance location and point of contact details are not provided, the contract was posted on July 29, 2026, signaling an active acquisition phase for specialized aerospace components.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 336414
DIBBS
Aircraft Support Assembly FabricationThe contract pertains to the manufacture of structural support assemblies for aircraft, specifically including door latch supports such as part number 1620-01-538-6064. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and falls under the NAICS code 336414 which designates aerospace product and parts manufacturing. The work involves precision fabrication of critical structural components that ensure the integrity and functionality of aircraft door systems. Although the solicitation number and specific performance location are not provided, the contract was posted on July 29, 2026 and is linked to a specific award record through the DIBBS system with contract number SPE4AX24D9408 and delivery identifier SPE4AX25F9371. The nature of the work requires adherence to stringent defense quality standards and specifications to support military aircraft systems.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 336414
DIBBS
Duct Assembly for Aircraft Environmental SystemsThe contract covers the supply of air duct assemblies critical to aircraft environmental control systems, including specific parts such as 74A838164-1013, which are essential for maintaining regulated airflow and temperature within military aircraft. This is a subcontract awarded under the North American Industry Classification System code 336414, indicating specialized manufacturing of aircraft hydraulic and environmental control equipment. The agreement is managed by the Defense Logistics Agency under the Department of Defense and was posted for public reference on July 29, 2026, suggesting a prospective or planned procurement rather than an active award. Performance location and detailed contact information are not specified, and no set-aside provisions are indicated, meaning it is open to all eligible contractors. The contract reference is linked through the DIBBS platform, serving as the official portal for tracking award details and delivery records under the identifiers SPE4AX24D9408 and SPE4AX25F9371.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 336414
DIBBS
Aircraft Structural Stiffener ManufacturingThe contract pertains to the fabrication of aircraft stiffeners critical for airframe reinforcement, specifically including part number 74A326051-2070, under a subcontract arrangement. The work is aligned with the NAICS code 336414, which classifies it within the aircraft manufacturing sector, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 29, 2026, and the performance location is unspecified, indicating potential flexibility in production sites. The contract award is linked to the DIBBS database under tracking numbers SPE4AX24D9408 and SPE4AX25F9371, with a referenced count of 47, suggesting it is one of multiple related actions under a larger procurement framework. No set-aside designation or specific point of contact is provided, implying this is a standard commercial subcontract with standard federal procurement compliance requirements.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 336414
Federal
Landsat 10 Spacecraft
Solicitation # 80GSFC26R0015
The National Aeronautics and Space Administration’s Goddard Space Flight Center is soliciting proposals for the acquisition of the Landsat 10 Spacecraft under RFP 80GSFC26R0015, which supersedes the previous draft issued in May 2026. The contract seeks a spacecraft capable of delivering multi-spectral imagery across visible to shortwave-infrared and thermal infrared bands to support long-term monitoring of Earth’s land surfaces and coastal regions, with a mission objective to operate continuously for at least five years. The spacecraft will be placed in a 653-kilometer sun-synchronous low-Earth orbit and equipped with the Landsat Instrument Suite, providing 26 spectral bands with a ground sampling distance between 10 and 60 meters and a 164-kilometer swath width. NASA will provide the space and launch services segments, while USGS will manage the ground system and mission operations. The contractor is required to deliver detailed analytical models, including 3D CAD, thermal, structural, dynamic, and attitude control subsystem models, as well as comply with stringent environmental standards covering radiation, space charging, magnetics, atomic oxygen, and micrometeoroid/orbital debris exposure, with microcircuit requirements aligned to MIL-STD-883. Key deliverables include the spacecraft and related models to be submitted to the Landsat 10 Project Office, alongside adherence to interface requirements defined in multiple attachments for spacecraft-to-ground, payload-to-launch, and space environmental systems. The response deadline has been extended to August 31, 2026, at 1:00 p.m. EST, and the solicitation includes updated documentation such as the Spacecraft Contractor Standards, a revised Master Equipment List, and a DPAS rating of DO-C9 on the SF-1449 form. Government-furnished equipment, including flight umbilical connectors, launch services support, and propellant, must be coordinated with schedule milestones ranging from L-18 months to L-1 month, with payload processing facilities provided by the government from L-60 days through L+7 days. No cost or pricing data, evaluation factors, or contract value estimates are specified in the release.
NASA Goddard Space Flight Center

POSTED

8 days ago

DEADLINE

in 26 days
View Details
NAICS: 336414
DIBBS
CANOPY, EJECTION SEAT
Solicitation # SPE4A7-26-Q-0881
This contract solicits 322 ejection seat canopies under NSN 1670-01-236-3820, with a total purchase request of 409 units, to be delivered within 600 days after order placement. The item is classified as a TYPE I (CODE V) shelf-life item with a fixed 156-month non-extendable shelf life, requiring strict adherence to preservation and labeling standards under MIL-STD-2073-1E and MIL-STD-129, including a 32-32 Type I shelf-life indicator. Packaging must comply with DLA’s RP001 requirements, including palletization, clean/dry preservation (Method 33), and specific packaging codes, while all items must bear accurate government-mandated markings, barcodes, and special labeling such as “First Article Exhibits — Do Not Post to Stock” in bold font. The contract mandates full compliance with Qualified Products Lists (QPL) and Qualified Manufacturers Lists (QML) for all components, enforceable through H02 and RQ016, and prohibits use of non-qualified sources. Inspection and acceptance occur at origin per RQ009 and Clause E06, with the government retaining the right to conduct First Article and Production Lot Testing prior to shipment. The contractor must maintain a certified CMMC Level 2 cybersecurity posture and adhere to SAE AS9100 quality standards, along with DFARS and FAR requirements including prohibition of contingent fees, anti-kickback provisions, and restrictions on subcontracting with debarred entities. Deliveries are FOB destination to DLA distribution centers in Warner Robins, GA, or Hill AFB, UT, with invoicing required exclusively via Wide Area WorkFlow. Award will be based on a best value trade-off, with past performance—including PPIRS-SR assessments, historical quality, and on-time delivery—carrying significantly greater weight than cost. The contract includes critical safety item controls, DPAS priority ratings, and hazard communication compliance (29 CFR 1910.1200), and requires accurate Unique Entity Identifier and CAGE code submissions under Section K, though no completed representations are present in the solicitation. No pricing data is provided, and the contract type remains unspecified.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

9 days ago

DEADLINE

in 21 days
View Details
NAICS: 336414
DIBBS
LEFT BASE ASSY
Solicitation # SPE4A7-26-Q-0879
The LEFT BASE ASSY with NSN 4925-01-568-6999 is solicited under contract SPE4A7-26-Q-0879 for a quantity of two units, with delivery required within 198 days after award. This procurement is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is not required to be uniquely identified under DFARS 252.211-7003(c)(1)(i), but must comply with specific dimensional corrections listed on drawings 3305AS1702 and 3305AS1705, including a radius of 0.25 inches and a missing dimension of 0.190 inches in specified zones. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, restricting access to contractors holding valid US/Canada Joint Certification Program certification, having completed DLA-mandated export control training and questionnaire, and been formally approved by DLA. Government identification must be removed from non-accepted supplies, and all quality assurance protocols must strictly adhere to the referenced military standards. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Mykhara Robinson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

9 days ago

DEADLINE

in 1 day
View Details
NAICS: 336414
Federal
AFSS Integration, HTV–2 Integration Kits, and ESR–19 Motor Transportation for MRBM T1/T2 Combined Sources Sought/Notice to Sole Source
Solicitation # 26-MDA-12371
The Missile Defense Agency is seeking industry input on the integration of an Autonomous Flight Safety System and Hypersonic Target Vehicle – 2 Integration Kits for the Medium Range Ballistic Missile Type 1/Type 2 target platforms, with the intent to potentially award a sole source modification to Aerojet Rocketdyne Coleman Aerospace, Inc. if no viable alternative sources are identified. The agency requires an autonomous flight termination system that replaces the current command destruct functionality by using onboard tracking, computing, and pre-programmed safety criteria to terminate flight if trajectory thresholds are breached, aligning with a 2030 mandate to phase out traditional range-based destruct systems. The Hypersonic Target Vehicle – 2 integration involves modifying the existing MRBM T1/T2 booster interface, updating test procedures, analyzing system compatibility, and adjusting the Carriage Extraction System to accommodate the new front end, all while adhering to established interface control documents. The work is to be performed under the existing contract period ending December 2029, with no extension anticipated, and is grounded in the exclusive possession of the technical data package by Aerojet Rocketdyne Coleman Aerospace, which the agency cites as the reason for potential sole source justification under statutory authority and federal acquisition regulations. Industry respondents are invited to submit capability statements detailing their capacity to perform AFSS and Hypersonic Target Vehicle – 2 integration under MDA’s systems engineering processes, including detailed schedules and cost estimates, with submissions limited to 25 pages in Microsoft Word or Adobe Acrobat format. The agency specifically encourages small business participation and requires disclosure of subcontractor roles, business size status, and socio-economic classifications if teaming arrangements are proposed. Proprietary or sensitive information submitted carries the vendor’s sole responsibility for proper marking, and the government explicitly states it will not pay for responses nor provide feedback. Responses must be received by August 11, 2026, via email to the designated point of contact, and the effort falls under NAICS code 336414 for guided missile and space vehicle manufacturing, with primary performance expected in Florida. This notice is strictly a request for information and does not constitute a solicitation, obligation, or commitment to procure.
Missile Defense Agency (mda)

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 336414
Federal
Inventory Management and Material Support-Sole Source to Cherokee Nation Armored Solutions
Solicitation # SPRRA226QSP04
The contract is a sole-source solicitation awarded to Cherokee Nation Armored Solutions for inventory management and material support services under solicitation number SPRRA226QSP04, posted on July 27, 2026, with a response deadline of August 11, 2026. The work falls under NAICS code 336414, which pertains to motor vehicle body manufacturing, and is managed by the Department of Defense through the Office of DLA Aviation at Redstone Arsenal, Alabama. Performance of the contract is required to take place in Tulsa, Oklahoma, with a ZIP code of 74103, indicating the operational focus is centralized there despite the agency’s administrative location. Primary point of contact for the solicitation is Lauren Tatum, reachable at lauren.tatum@dla.mil, with Anna Phillips serving as the secondary contact at anna.phillips@dla.mil. As a sole-source award, this contract bypasses competitive bidding, indicating an exclusive agreement with Cherokee Nation Armored Solutions likely due to unique capabilities, prior performance, or proprietary expertise. Interested parties must submit responses by the stated deadline to be considered, and further details regarding scope, deliverables, and technical requirements are contained in the referenced attachment, CNAS RFQ (SPRRA226QSP04).
Al DLA Aviation At Huntsville

POSTED

9 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335999
New
DIBBS
Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER, INNER SHOC
Solicitation # SPE4A7-26-R-X998
The contract pertains to the procurement of one cylinder, inner shock absorber, boom stowage, identified by NSN 1680-00-672-8041, with a delivery deadline 365 days after award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Department of Defense under agency code SPE4A7-26-R-X998, with a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is not subject to Item Unique Identification per customer request, in accordance with DFARS 252.211-7003(c)(1)(i). Cyberspace requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification or bare item marking must comply with specified protocols. Packaging must conform to DLA procurement standards, and tailored quality requirements apply to both manufacturers and non-manufacturers. Any configuration changes require formal engineering change proposals. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Export control applies to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, wherever located; access is restricted to contractors with approved JCP certification, completed DOD export handling training, and DLA authorization. DFARS 252.225-7048 governs this data handling restriction.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVIS
Solicitation # SPE4A7-26-T-617Y
The contract is for the procurement of 1,429 units of BOLT, CLEVIS with NSN 5306-00-151-3538 under solicitation SPE4A7-26-T-617Y, issued by the Department of Defense through ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and packaging must adhere to ASTM D3951 as well as MIL-STD-129 for marking and labeling. Palletization must meet DLA Packaging Requirements, and government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with verification levels or AQLs assigned based on attribute criticality, and zero non-conformances required unless otherwise specified. Identification markings must conform to MIL-STD-130N in addition to manufacturer-specific data. The required delivery date is March 25, 2027, with a need ship date of January 31, 2027, and the contract references specific DLA transportation procedures for shipping and first destination handling.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PIVOT BLOCK ASSY, LA
Solicitation # SPE4A7-26-T-618N
The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-26-T-618E
This contract pertains to the procurement of a duct assembly for air conditioning-heating systems, identified by part number 4A92040-103A and NSN 1660008833626, with a required quantity of five units. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data held by Lockheed Martin Corporation and sourced exclusively from Arrowhead Products Corporation, with no alternative suppliers permitted unless an approved source approval request is submitted and granted. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific protocols for inspection, testing, and documentation, including the use of zero-defect sampling under MIL-STD-1916 or ASQ H1331, and mandatory adherence to verification levels and AQLs for critical, major, and minor attributes. All items must be inspected and accepted at origin, with no tolerance for quantity variance, and must be packaged in compliance with ASTM D3951 and MIL-STD-129, as superseded by DLA packaging standards, with palletization following RP001 guidelines. The item is designated as a critical application and requires physical identification and labeling per RQ017. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The delivery is FOB origin with a 473-day lead time, and the required delivery date is January 12, 2028, with a need ship date of November 30, 2027. The contract designates Robins Air Force Base, Georgia as the sole delivery point, and unit price is set at $5.00 per unit. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
New
DIBBS
PLATE, TEMPETURE IND
Solicitation # SPE4A7-26-R-XA01
The contract is for a single unit of a temperature indicator plate, identified by NSN 1650-01-034-8563 and part number 240-180F, supplied by Palmer Wahl Instruments Inc. under a firm fixed price arrangement with no tolerance for quantity variance. Delivery is required within 75 days after award, with both inspection and acceptance occurring at the origin. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging guidelines, with palletization following specified procurement standards. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise dictated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must implement configuration change management, ensure physical identification per RQ017, maintain measuring equipment calibration under RT001, and submit documentation for source approval per RC001. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information controls apply per RD002. The contract is a total small business set-aside, with the prime point of contact at the Department of Defense’s ASC Supplier Operations division.

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-618L
The contract pertains to the procurement of 3,250 units of a quick release pin identified by NSN 5315-01-525-4843 and part number QRD3B1025Z, classified as a commercial item. Delivery is required within 113 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. All units must comply with stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, though packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129. Packaging and palletization must adhere to DLA’s RP001 requirements, and the unit of issue is each (EA) with zero tolerance for quantity variance. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. The item is designated as a critical application item and must bear physical identification per RQ017. Documentation for source approval, compliance with DLA packaging, and removal of government identification from non-accepted supplies are mandatory. The delivery address is DLA Distribution Albany, and the original required delivery date is December 16, 2026, with a needed ship date of July 23, 2026. The contract is issued under solicitation SPE4A7-26-T-618L with a total price of $3,250.00, and all terms are governed by the DLA framework for simplified acquisition.
Other Fabricated Wire Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-618A
The contract outlines the procurement of a SPACER, PLATE with part number 5365-01-417-8551 and quantity of 134 units, delivered FOB origin under solicitation SPE4A7-26-T-618A, with a required delivery date of November 29, 2026, and a lead time of 107 days. The item is designated as a critical application item and must comply with technical and quality requirements from the DLA Master List, including tailored higher-level quality provisions, inspection and acceptance at origin, and specific marking and packaging standards per MIL-STD-129 and MIL-STD-2073-1E. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The material is classified as specialty metal, triggering compliance with DFARS 252.225-7008, 7009, and 7010. The product must adhere to Technical Data Package Revision A Generation 2 referenced against baseline drawing 19207 12365475-1, and all packaging and palletization must meet DLA’s procurement requirements. Unit of issue is each, priced at $134.00 per unit, with no variance allowed in quantity. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. The item must be marked according to MIL-STD-129 with no special marking codes applied, and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense, with primary point of contact Lexus Henry. The NSN and part number are strictly controlled, and all documentation must align with the DLA’s authorized unit of issue system and transportation guidelines specified in DLAD Proc Notes C19 and C20.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details