FELT STRIP

PID/PAC
FELT STRIP.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET
FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES INDIVIDUAL NSN DATA. NSN 8305-00-812-2360, PGC19187. ITEM NAME: FELT STRIP PART NUMBER: C-F-206 CAGE CODE: 81349 .Shall be in accordance with (IAW) Federal Specification C-F-206G, FELT SHEET: CLOTH, FELT, WOOL, PRESSED dated 27 June 1989... 75percent wool content minimum and 25 percent extraneous material. Intended for antisqueak strips and for lining when cemented tofiberboard or metal panels.. Fiber material: Wool Color: Black Procurement Group Code (PGC): 19187 Thickness: 0.093 (3/32) inchesMinimum thickness: 0.087 inches Maximum thickness: 0.101 inches Roll length: 26 to 55 yards Width: 1.125 inches (should be 60 or 72inches minimum per C-F-206G) Weight, pounds per square yard: 1.09 minimum and 1.16 maximum Type: I (Mechanical-roll felt) Class:12R3X (F-55 Lining) Tensile strength: 125 pounds per square inch minimum for both lengthwise and crosswise directions EnvironmentalProtection: Mildew resistant and water repellent. Felt shall be mildew resistant in accordance with Type III (mildew resistant andmoisture resistant) of MIL-F-2312F, Felt, Hair or Wool: Mildew Resistant and Moisture Resistant Treatment For dated 24 April
1989.. Unit of issue is a FOOT (FT).. WHEN REQUIRED, TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH DPSCM-4155.3 AREREQUIRED WITH ALL CONTRACT COMPONENT LOTS.. SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED, INCLUDING APPLICABLESPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORTCONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT. RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THEPERFORMANCE OF ALL INSPECTION, EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES ANDSERVICES CONFORM TO PRESCRIBED REQUIREMENTS. LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS a. This solicitation/award consistsof the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality AssuranceRequirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. 52.246-15 CERTIFICATE OF CONFORMANCE
. 3/13/2018
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FORMIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is hereby canceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD PreferredMethods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users arecautioned to evaluate these documents for their particular application before citing it as a replacement document.
(Copies ofMIL-STD-1916 are available online at http://assist.daps.dla.mil http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ DistributionCenter, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
. DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTETHE FOLLOWING:
LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USEDFOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFERAND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BYSCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE(UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALLBE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED ASSPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.
NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNEDUNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.
SPE1C1-26-Q-0502
SECTION B
SUPPLY/SERVICE: PGC: 19187 CONT'D
THE FOLLOWING DEFECTS APPLY FORBARCODE LABELS/TAGS:
BAR CODE OMITTED OR NOT READABLE BY SCANNER
HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE
NOTVISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM
NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG USE TYPE VII(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.
IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG,PAPER) OF MIL-DTL-32075. NSN/Part Number: 8305-00-812-2360 Quantity: 1 FT Purchase Request: 7018247220QTY: 5 Delivery: 120 days ADO