Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

This Government Contract opportunity from California was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fencing and Temporary Enclosure Installation

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238990
New
Federal
GARRISON TRASH RACK MODIFICATION CRANE RENTAL
Solicitation # W9128F26QA099
Solicitation W9128F26QA099 is a firm-fixed-price service contract issued by the U.S. Army Corps of Engineers, Omaha District, for the rental of a crane and a qualified operator at the Garrison Dam near Riverdale, North Dakota. The primary objective is to support the modification of intake trash racks to conserve cool waters for fishery missions during drought conditions. The contractor is responsible for providing all equipment, tools, vehicles, and supervision necessary to lift and lower trash racks weighing between 30,000 and 33,000 pounds, with the capacity to overcome friction factors up to 41,000 pounds. The period of performance is scheduled from October 30, 2026, through June 30, 2027. This procurement is a total set-aside for Women-Owned Small Businesses and Economically Disadvantaged Women-Owned Small Businesses under NAICS 238990. Award will be based on the most advantageous offer, evaluating price alongside technical information and past performance, including three project examples from the last two years. Key compliance requirements include adherence to EM 385-1-1 safety standards, the submission of a site-specific Accident Prevention Plan and Lift Plan, and compliance with Service Contract Act wage determinations for North Dakota. Following Amendment 0001, the closing date for the submission of offers has been extended to October 23, 2026, at 2:00 PM.
W071 Endist Omaha

POSTED

about 14 hours ago

DEADLINE

in 10 days
NAICS: 238990
New
Federal
GAOA Blanchard Springs Caverns Tunnel Rehabilitation in Ozark-St. Francis NF
Solicitation # 1240BH26R0013
Solicitation 1240BH26R0013 is a Request for Proposal issued by the USDA Forest Service for the rehabilitation of the Blanchard Springs Caverns Tunnel in the Ozark-St. Francis National Forest, located in Fifty-Six, Arkansas. This project is a 100% small business set-aside under NAICS 238990 with a magnitude exceeding 10 million dollars. The scope of work encompasses comprehensive infrastructure repairs and safety upgrades for the Dripstone and Discovery Trail, including structural stabilization of tunnel entrances and exits, masonry repairs, installation of instrumentation and monitoring equipment, and the replacement of air lock doors, security doors, suspended ceiling systems, ductwork, lighting, distribution components, safety handrails, and the mine phone system. The contract requires a qualified contractor to provide all labor, equipment, supplies, and testing, with specific experience requirements for shotcrete and earthwork specialists. Performance must begin within 10 calendar days of the notice to proceed and be completed within 426 calendar days. Award will be based on the best value using a tradeoff process that evaluates price, technical approach, and past performance. Proposals must be submitted as separate PDF files to the designated Contracting Specialist, and the final proposal due date was extended via amendment 0004 to October 29, 2026. Performance and payment bonds are required, and the project is subject to Davis-Bacon prevailing wage rates.
USDA Forest Service

POSTED

about 14 hours ago

DEADLINE

in 16 days

AI Contract Overview

Show more

The High Speed Rail Authority of California is seeking a subcontractor for the installation and maintenance of temporary electric or portable fencing to contain goats within designated grazing zones. This project encompasses all necessary materials, labor, and site-specific design required to establish effective enclosures. The work will be performed in Madera, and the solicitation is categorized under NAICS code 238990. Interested parties must submit their responses by the deadline of August 26, 2026.

General Info

Subcontractor for goat fencing installation and maintenance in Madera, due August 26, 2026.

Place of Performance

Madera, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of HSR26-27.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IFB HSR26-27 Goat Grazing Services in Madera, CA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → High Speed Rail Authority
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation and maintenance of temporary electric or portable fencing to contain goats within grazing zones, including materials, labor, and site-specific design.

More opportunities from California → High Speed Rail Authority

Same awarding agency

NAICS: 238910
SLED
Re-Bid HSR26-24 Clearance and Demolition Services at 16608 8th Avenue, Hanford, CA 93230
Solicitation # HSR26-24
The California High-Speed Rail Authority is soliciting bids for Right-of-Way clearance and demolition services at 16608 8th Avenue, Hanford, California. The project involves the demolition and removal of a 1,390 square foot single family home and a 672 square foot garage, including the removal of foundations, footings, and various debris. The scope of work further requires the testing and abatement of lead paint and both friable and non-friable asbestos, capping of sewer lines, and site restoration through discing, backfilling, and blading. The contract term runs from December 1, 2026, through November 30, 2027, with an option for a 12-month extension. Bidders must possess specific licensure, including Class A or Class B and C-21 licenses, C-22 or ASB certification, a C-57 well-drilling license, and a HAZ certificate for hazardous substance removal. Additional requirements include DIR registration, a Motor Carrier Permit, and QSD/QSP certifications for stormwater pollution prevention. Bids are due by October 28, 2026, and must be submitted in a sealed envelope with all documents printed single-sided. The Authority will evaluate bids based on responsiveness and administrative compliance, applying preferences for certified Small Businesses and Disabled Veteran Business Enterprises, with utilization goals of 25 percent and 3 percent, respectively. Contract administration includes strict adherence to prevailing wages and environmental laws. Performance and payment bonds are required for contracts exceeding 10,000 and 25,000 dollars, respectively. Final payment is contingent upon a successful job inspection by the Authority Contract Manager, specifically verifying compliance with the Storm Water Pollution Prevention Plan and the proper abandonment of septic tanks and sewer systems. All hazardous waste transportation must be conducted in appropriately labeled containers by vehicles with a valid Certificate of Compliance.
Site Preparation Contractors

POSTED

7 days ago

DEADLINE

in 15 days
View Details
NAICS: 331420
SLED
HSR26-28 Invitation for Bids for Copper Conductors
Solicitation # HSR26-28
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-28 for the manufacture and supply of OCS Copper Conductors to support the First Construction Segment of its high-speed rail track. The scope of work requires the production of 150mm2 Copper Tin contact wire and 65mm2 Bz catenary/messenger wire for the SNCF S220 OCS system. All materials must be Buy America compliant per 49 U.S.C. 22905 and adhere to specific international technical standards, including EN 50149, IEC 63190, EN 50182, and EN 50326. Performance includes delivering materials to sites in Kern and Fresno Counties, with a requirement for direct handoff to the Authority's onsite contractor at the railhead. The contract will be awarded to the lowest responsive and responsible bidder based on a pass/fail evaluation of technical criteria, including the capability to produce the conductors and ensure timely delivery. Bidders must submit a bid bond equal to 10 percent of the total bid amount and commit to small business goals, including a 25 percent Small Business goal (inclusive of 3 percent Micro-Business) and a separate 3 percent Disabled Veteran Business Enterprise goal. Bids are due by November 13, 2026, at 12:00 PM PST, and must include a hard-copy Bid Form in a sealed envelope along with a comprehensive electronic PDF submission. Contractors must comply with extensive federal and state regulations, including the National Environmental Policy Act, Title VI of the Civil Rights Act, the Americans with Disabilities Act, and the California Labor Code. Quality assurance is strictly managed through a required First Article inspection and the submission of a Quality Control Plan within 60 days of the Notice to Proceed. Invoicing is to be handled electronically on a monthly basis through the Authority's Financial Office in Sacramento.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

11 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335929
SLED
HSR26-39 Invitation for Bids for Aluminum Conductors
Solicitation # HSR26-39
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-39 for the procurement of Overhead Contact Systems (OCS) Aluminum Conductors to support the First Construction Segment of its high-speed rail track. The scope of work requires the contractor to supply a complete portfolio of materials, specifically Aluminum-Steel 288mm² auxiliary/feeder wire and Aluminum-Steel 93.3mm² static/ground/earth wire, utilizing the SNCF S220 OCS system. Deliveries are to be made to Kern and Fresno Counties, requiring a direct handoff to the Authority's onsite contractor at the railhead. All materials must be Buy America compliant per 49 U.S.C § 22905 and adhere to various European Standards (EN) and ASNT NDT certifications. Bids are due by November 19, 2026, at 12:00 PM PST, and must include a bid bond equal to 10 percent of the total bid amount. The Authority will evaluate bidders on a pass/fail basis using a Technical Criteria Statement, focusing on production capability, delivery capacity, and a requirement of having successfully supplied at least 50 miles of similar materials to rail projects within the last 15 years. Awarded contractors must submit a detailed delivery plan within 30 days of the notice to proceed and provide a project-specific quality control plan for approval prior to manufacturing. Payments will be processed electronically in accordance with the California Prompt Payment Act, generally within 45 days of acceptance.
Other Communication and Energy Wire Manufacturing

POSTED

11 days ago

DEADLINE

in about 1 month
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS