Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Ferrium, Round Bar, for 81MM M54 Mortar, for the Watervliet Arsenal

Active
W911PT26QA127Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation W911PT26QA127 is a total small business set-aside under NAICS code 331110 for the procurement of 750 lbs of Ferrium M54 round bar for 81MM M54 mortars. The material must be tempered, normalized, and polished, with a 5-inch diameter (tolerance +0.025/-0.00) and a minimum length of 63 inches, conforming to AMS 6516 specifications. The place of performance and delivery is the Watervliet Arsenal in Watervliet, New York. The contractor is required to ensure material traceability by marking specific heat numbers on each article if a lot contains multiple heats. A critical deliverable is the submission of a Certified Test Report (CTR) with each shipment, adhering to DI-MISC-80678 and QAP-APPX-WVA paragraph 4.6 to verify chemical and mechanical test results. Responses are due by August 24, 2026, and must be submitted to the Department of the Army at the Watervliet Arsenal address.

General Info

Small business set-aside for 750 lbs of Ferrium M54 round bar for mortars.

Agency

Department Of Defense → W6QK Acc WvaView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

SBA

Documents

(3)

General Requirements for Quality Assurance Provisions QAP-APPX-BL

DOCXqap

Solicitation W911PT26QA127 for Benet M54 Material Steel

PDFrfq

Certification/Data Report for Minor Forgings/Castings & Material (CN2)

DOCXcontract-data-requirement-list

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Wva
Contacts1 person available
OfficeWATERVLIET, NY, 12189-4050, USA
Organization / Agency
Department Of Defense → W6QK Acc Wva
View Agency Profile
Office AddressWATERVLIET, NY, 12189-4050, USA

Full Description

Show more

750 LBS - Ferrium, M54 Round Bar, Tempered, Normalized, Polished, 5 inches diameter + 0.025 /- 0.00 X 63 inch lengths minimum, (750 lbs.), Per AMS 6516. Contractor must mark specific Heat numbers on each article if material lot contains multiple Heat numbers.

Similar Contracts

Same NAICS industry code

NAICS: 331110
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2077
The contract pertains to the procurement of 91 feet of forged steel bar, grade 4340, with a diameter of 3.250 inches and a length requirement of 12 to 16 feet, delivered in whole-foot increments only. The material must conform to technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including adherence to ASTM A29/A29M-20 and SAE AMS2806 standards, and is governed by the Technical Data Package Rev A Gen 1 under DOD-F-24669/1. A Certificate of Quality Compliance, or mill-material certification, is mandatory and must be included with every shipment to the delivery point and forwarded to the DLA Troop Support Contracting Officer. All units must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer's name, heat and lot number, and dimensions, applied via stamping (excluding die stamp) or stenciling with legible, waterproof, non-contaminating ink. Adhesive labels are required for bars, tubes, or shapes under 0.250 inches nominal OD, with tags acceptable for wire, and markings must comply with MIL-STD-129 and MIL-STD-12. Packaging must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with special packaging codes Z and ZZ adhering to ASTM A700, and palletization must meet specified standards. The product is subject to the Qualified Suppliers List for Distributors (QSLD) requirement—only suppliers listed on the official DLA QSLD are eligible for award, and deviations must be explicitly declared; non-compliance constitutes an unauthorized substitution with potential criminal penalties. The supply is FOB origin, subject to a 10% variance in quantity, with inspection and acceptance occurring at destination. Delivery is due within 163 days of order, to the DLA Distribution Depot in Tinker AFB, Oklahoma. Electronic invoicing via WAWF is required, and contractors must comply with DFARS clauses covering cybersecurity, defense information safeguarding, hazardous materials, hexavalent chromium prohibition, export controls, and restrictions on covered defense telecommunications equipment. The solicitation incorporates FAR clauses on material requirements, simplified acquisition terms, contract type, small business representation, equal opportunity, and prohibition of
DEPOT OKLAHOMA

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331110
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2076
The contract requires the procurement of 43 feet of cold-drawn, flat steel bar composed of SAE 4130 alloy, normalized and tempered, with a thickness of 0.750 inches and a width of 1.500 inches, supplied in whole-foot lengths between 10 and 12 feet, referenced at 3.830 pounds per foot. Delivery is FOB origin to Warner Robins Air Force Base, Georgia, with a 163-day lead time from receipt of order and a firm delivery requirement by May 12, 2027. The material must conform to SAE AMS-S-6758B and SAE AMS2806 specifications, and each unit must carry continuous identification markings including the DLA delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions, all applied via stamping or stenciling in legible, waterproof, non-contaminating characters visible to the unaided eye. Adhesive labels are required for bars under 0.250 inches nominal OD, and all packaging must adhere to MIL-STD-2073-1E with preservation code ZZ per ASTM A700, and marking per MIL-STD-129 including the special code ZZ for additional requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement renders a bid noncompliant and subject to rejection. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, and failure to provide this documentation constitutes grounds for rejection. Source inspection is waived for QSLD-compliant suppliers, along with certain quality conformance inspection requirements such as COQC, PVT, QAP-EQ003, and ASQ H1331. The contract prohibits the use of additive manufacturing, and suppliers must submit a Safety Data Sheet prior to award. Compliance with DFARS 252.204-7012 for safeguarding covered defense information, the Buy American Act, the Berry Amendment, and restrictions on hexavalent chromium and covered telecommunications equipment is mandatory. Payment must be processed via Wide Area Workflow, and contractors must be registered in DLA’s Account Management & Provisioning System. All quotations must be
WARNER ROBINS

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency