Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Fiber Optic Connector Supply (Commercial Off-The-Shelf Item)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of five commercial fiber optic connectors, identified by NSN 6060014229749, to be packaged and labeled in full compliance with military standards. These components are classified as commercial off-the-shelf items and are intended for delivery to DLA Distribution in San Joaquin, California, with the specified place of performance located in Tracy, CA, at zip code 95304-5000. The solicitation falls under NAICS code 334210, which categorizes it within the telecommunications equipment manufacturing sector, and is structured as a subcontract under the Department of Defense’s Maritime Supply Chain organization. Bid responses must be submitted by August 3, 2026, at 5:00 PM, following the posting of the solicitation on July 23, 2026. The contract does not specify a set-aside classification or require particular small business considerations. While no point of contact is listed, the official solicitation details are accessible via the DIBBS platform at the provided UI link. All units must meet exacting military packaging and labeling requirements to ensure compatibility with defense logistics systems, and the delivery must be fully compliant with the technical and administrative expectations of the Department of Defense supply chain.

General Info

Five military-compliant fiber optic connectors to be delivered to Tracy, CA, by August 3, 2026, under DoD supply chain.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334210 - Telephone Apparatus ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 5 units of commercial fiber optic connectors (NSN: 6060014229749), packaged and labeled per military standards, delivered to DLA Distribution San Joaquin, CA.

Similar Contracts

Same NAICS industry code

NAICS: 334210
New
Federal
TELEPHONEThis contract pertains to the repair of TELEPHONE equipment under a fixed-price arrangement, issued through a solicitation by the Naval Supply Systems Command Weapon Systems Support Mechanical, with solicitation number N0010426QND11. The requirement falls under Emergency Acquisition Flexibilities and is certified for national defense under the Defense Priorities and Allocations System. The contractor must perform repairs in strict accordance with the original manufacturer’s specifications, drawings, and approved technical directives, using specific CAGE codes 11447 and 12763 with reference numbers K10053082-1 and 65032-900. All repaired items must comply with MIL-STD-129 for marking and MIL-STD-2073 for packaging, and must be completely free of metallic mercury and mercury contamination, with stringent testing protocols in place to detect any exposure. The contractor is responsible for all inspection and testing, maintaining records for one year after delivery, and ensuring final government acceptance of each repaired asset. The contract mandates a repair turn-around time of 174 days from receipt of the carcass, with vendors required to complete a teardown and evaluation within 90 days of receipt and submit a firm-fixed price quote that includes all associated repair costs, from handling damaged or incomplete units to CAV reporting. Failure to meet the RTAT will result in per-unit price reductions applied via contract modification, without limiting the government’s right to terminate for default. The contract includes an optional 365-day extension window to increase quantity without re-solicitation, and pricing must be provided for both base and option quantities. All proposals must specify any deviations from specified requirements, including packaging, labeling, or inspection locations, with awards contingent upon strict compliance. The solicitation is set aside for small businesses, requires compliance with Buy American provisions, Equal Opportunity for Veterans and Workers with Disabilities, and mandates the use of Wide Area Workflow for payment. The point of contact for the procurement is Jocelyne Dzonangfouego, and final proposals are due by August 24, 2026.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 28 days
View Details
NAICS: 334210
New
DIBBS
Commercial Item Supply – Receptacle Connector (NSN 5935017032952)The contract calls for the supply of five military-specification receptacle connectors identified by NSN 5935017032952, adhering strictly to defense packaging and labeling requirements to ensure compatibility with military logistics and handling protocols. The item is classified under NAICS code 334210, indicating it falls within the manufacturing of electronic components and accessories, and is being procured as a commercial item through a subcontract arrangement under the Department of Defense’s Active Devices Division. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, specifying where delivery and fulfillment must occur. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, leaving a window of approximately eleven days for potential vendors to submit proposals. While no set-aside provisions are specified, the contract is accessible to qualified commercial suppliers capable of meeting defense standards without requiring special vendor certifications. The contract does not list a point of contact, and all submissions must be managed through the DIBBS portal via the provided link, which serves as the official channel for communication and submission. Compliance with packaging and labeling standards is non-negotiable, as failure to meet these could result in rejection regardless of technical compliance of the connectors themselves.
ACTIVE DEVICES DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 334210
New
DIBBS
Digital Data Coupler SupplyThe contract solicits the supply and delivery of digital data couplers identified by NSN 6625016079345, intended for integration into defense systems with strict adherence to military packaging and electronic invoicing protocols. All delivered units must meet standardized military specifications to ensure compatibility, durability, and secure data transmission within operational environments. The procurement is issued as a subcontract under the NAICS code 334210, indicating classification within the navigational, measuring, electromedical, and control instruments manufacturing sector. Performance of the contract is designated for New Cumberland, Pennsylvania, with all deliveries expected to be completed at this location. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, with no set-aside provisions or preferred contractor categories indicated. The managing agency is the Department of Defense, specifically under the Maritime Supply Chain organization, reflecting the defense-focused nature of the requirement. While no point of contact is provided, all inquiries and submissions must be made through the official DIBBS portal linked in the documentation. Compliance with electronic invoicing standards and military packaging regulations is mandatory for contract award, and failure to meet these requirements will result in disqualification regardless of technical or pricing qualifications.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333310
New
DIBBS
EYEPIECE ASSEMBLY, OThe contract pertains to the procurement of an eyepiece assembly for optical instruments, identified by part number 064407 and NSN 1240-01-382-8895, with a quantity of three units. All supplies must strictly comply with the technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, as well as applicable military standards such as MIL-STD-1916 for sampling, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking, which includes special handling instructions for delicate instrumentation and directional orientation. The item is classified as a critical application and is subject to configuration change management, requiring formal engineering change proposals or variance requests for any deviations. Mercury and mercury-containing compounds are strictly prohibited in manufacturing or direct contact with the hardware, except for specific exempted uses such as certain batteries, lamps, sensors, or weapon systems, and where used, must include secondary containment per NAVSEA 5100-003D. The use of ozone-depleting substances is entirely banned in all processes unless prior written approval is obtained from the contracting officer. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance. Government-furnished property may be required without charge to support production, and all deliveries must be shipped FOB origin to the designated DLA receiving facility in Tracy, California, with a delivery window of 245 days from the award date. The unit of issue is each, priced at $3.00 per unit, with no variance permitted in quantity. Packaging must adhere to DLA standards including palletization, protective methods, and marking, and all supplies must be free of unauthorized government identifiers if rejected.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
METER, SPECIAL SCALEThe contract pertains to the procurement of a special scale meter identified by NSN 6625015030148 and part number 70578, with a quantity of six units to be delivered FOB origin within 200 days. The item may contain batteries and is subject to strict restrictions regarding mercury—mercury or mercury-containing compounds must not be intentionally added or come into direct contact with the hardware except in specific authorized applications such as functional batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specific methods including preservative treatment, dry packaging, and E5 unit containers, with no special marking required. All packaging and shipping must adhere to DLA’s procurement requirements and hazardous materials guidelines. The delivery destination is the DLA Distribution San Joaquin facility in Tracy, California, and the original required delivery date is April 11, 2025, with a need ship date of October 29, 2024. The contract is governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The contract is issued under solicitation SPE7M1-26-T-233L and falls under NAICS code 334515.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWERThe contract pertains to the procurement of five power transformers identified by NSN 5950-00-113-7607 and part number 814115 from Simmonds Precision Products Inc, with a delivery requirement of 367 days from award, to be shipped FOB origin. The items must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including a fragile designation, and must be palletized per DLA packaging guidelines. Special attention is required to protect external terminals from damage during handling. Sampling and inspection protocols follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are treated as major, and acceptance requires zero non-conformances in the sample lot. Quality requirements referenced under RQ001 are drawn from the DLA Master List of Technical and Quality Requirements, and the contract applies tailored higher-level quality standards to both manufacturers and non-manufacturers. Item Unique Identification is not mandated per customer request, and the delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The contract solicitation number is SPE7M1-26-T-232Z, with a response deadline of August 3, 2026, and the original required delivery date is November 26, 2027. Transportation and hazardous material shipping adhere to DLA procedural notes C19 and C20.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIDThis contract specifies the procurement of a fluid filter element designated as NSN 4330-01-357-2519, with the part number GC-00273-168H or GC-00273F-168H, supplied exclusively by PALL AEROPOWER CORPORATION under restricted sourcing requiring government engineering approval. The item is classified as a critical application component and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized in the specifications. The contract mandates adherence to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no special marking codes applied. Deliveries are to be made FOB origin in a quantity of nine units with zero variance allowed, arriving at the designated DLA Distribution facility in New Cumberland, Pennsylvania within 192 days of contract award. The original required delivery date was January 20, 2027, with a needed ship date of February 15, 2027. The contract is issued under solicitation SPE7M1-26-T-233A, with an established unit price of $9.00 per unit for a total value of $81.00, and all transportation logistics are governed by DLA procedures C19 and C20.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
CYLINDER-PUMP SETThe contract is for the procurement of one Cylinder-Pump Set, identified by NSN 4320-01-531-2219 and part number SCR-106H, under solicitation SPE7M1-26-T-232D. Delivery is required within 20 days of award to a FPO address in the Pacific, with FOB destination terms and zero tolerance for quantity variance. Inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specific preservation methods, unit containers, and palletization per DLA requirements, with no special marking or hazardous materials. The item must not contain ozone-depleting chemicals, and mercury or mercury compounds are strictly prohibited except for specific exempted functional uses in accordance with NAVSEA guidelines, including requirements for secondary containment in portable devices. All technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date. The contract mandates adherence to DLA packaging and transportation procedures, with detailed shipping instructions for vessel and parcel post routes, and includes government-specific identifiers and compliance codes for tracking and logistics. The required delivery date is July 22, 2026, with solicitation responses due by August 6, 2026, and procurement is managed by the Department of Defense under NAICS code 333996.
Fluid Power Pump and Motor Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, CARBON MONOXThe contract pertains to the procurement of two units of a carbon monoxide indicator, part number BWC2-M25100, with NSN 6665200018480, for delivery to the USS STETHEM DDG 63. Delivery is required within 20 days to the destination FOB, with zero tolerance for quantity variance, and inspection and acceptance occur upon arrival. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months, extendable, and must comply with MIL-STD-2073-1E packaging standards, including labeling per MIL-STD-129. Packaging must meet DLA’s procurement requirements and include specific handling instructions for hazardous materials, as the device contains a lithium battery classified under HCC: ARTICLE, BATTERY, LITHIUM. Shipping must be by the fastest traceable means—parcel post is prohibited—and transportation procedures follow DLAD PROC NOTES C19 and C20. The product is subject to strict hazard communication protocols effective June 1, 2015, mandating submission of Safety Data Sheets and compliant HCS labels aligned with 29 C.F.R. 1910.1200, along with employee training on these requirements. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for designated functional uses such as sensors or instruments as specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must feature shock-proof construction and a secondary containment boundary. All packaging, marking, and shipping must adhere to federal standards, and the vendor must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVEA monel fluid valve with a stellite tip, specifically designed for steam applications and classified as a critical component, is being procured under contract SPE7M1-26-T-231X with the identification NSN 4820012208350. The valve must conform to QQ-N-286 Class A specifications and is manufactured by Specialties Co. as model 1894MSC with quality assurance provided by Quality Assured Products Inc DBA 0FEA5. The item is subject to stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the valve except under specific exemptions for batteries, instruments, weapon systems, or chemically specified reagents, and any portable devices containing mercury must meet NAVSEA 5100-003D requirements for shock resistance and secondary containment. The contract mandates delivery of one unit within five days FOB destination, with zero variance allowed in quantity, and requires packaging that complies with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. Packaging must be labeled with the correct Unit of Issue and Quantity per Unit Pack as specified, and palletization must adhere to DLA guidelines. The delivery is directed to USNS MT WHITNEY LCC 20 at FPO AE 09517-3310, with transportation governed by DLAD Proc Note C19 and C20. The original required delivery date is July 23, 2026, and the item is designated for government use under specific control codes including IPD 02, DIC A41, and FC F4. All supplies must be stripped of government identification if rejected, and the procurement is subject to the DLA’s authorized unit of issue standards.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
COUPLER, FIBER OPTICThe contract is for the procurement of 12 fiber optic couplers, identified by NSN 6060015068264, under solicitation SPE7M1-26-T-232C, with a total contract value of $144. Delivery is required within 20 days of award, with FOB origin pricing terms and destination as the point of inspection and acceptance. All items must be packaged in accordance with ASTM D3951, but compliance with the DLA Master List of Technical and Quality Requirements takes precedence, and palletization must adhere to RP001 DLA Packaging Requirements. Packaging and labeling must strictly follow MIL-STD-129, including proper Unit of Issue and Quantity per Unit Pack data, with no exceptions for marking or barcoding. The use of mercury or mercury-containing compounds is prohibited unless specifically exempted, such as in functional batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents authorized by NAVSEA; any portable devices containing mercury must be shock-proof and include a secondary containment system per NAVSEA 5100-003D. Delivery is to be made to NIWC Pacific at Building 7, 4297 Pacific Highway, San Diego, CA, and must be shipped by traceable methods only—parcel post is strictly prohibited. The contractor must comply with FAR and DFARS clauses including sustainable products, hazardous material identification, combating human trafficking, employment eligibility verification, safeguarding covered contractor information systems, changes, and subcontracting, all under a deviation dated 2026-00038. Payment must be processed through WAWF using an Invoice and Receiving Report or similar approved document type, with no use of IPP. The contract applies to a simplified acquisition with no option quantities allowed, and no trade-off or evaluation factors beyond price and compliance are specified, implying likely award on a Low Price Technically Acceptable basis. Offerors must be registered in SAM.gov and may be subject to socioeconomic set-asides, including HUBZone price preferences. All hazardous materials require labeling per OSHA HazCom and MIL-STD-129, and the contractor must ensure no mercury contamination of supplied hardware as specified.
Electronic Connector Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIThe contract pertains to the procurement of a fluid filter element with part number 3532-7040 and NSN 4330011539524, designated as a critical application item supplied by SCHRADER-BRIDGEPORT INTERNATIONAL. Four units are required at a unit price of $4.00, with a total contract value of $16.00, and delivery must be completed within 20 days from the contract date under FOB origin terms. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, specifically incorporating R and I numbered specifications. Strict prohibitions forbid the intentional introduction of mercury or mercury-containing compounds into the product or its contact surfaces, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E, utilizing specified preservation methods, materials, and unit container configurations, while labeling and marking must follow MIL-STD-129 without special codes. Palletization must meet DLA packaging standards, and the delivery destination is Fort Wainwright, Alaska. The shipment is subject to DLA transportation procedures C19 and C20 and is designated for government use with controlled tracking identifiers. The original required delivery date is July 22, 2026, and the contract solicitation number is SPE7M1-26-T-231W, issued under NAICS code 333998 by the Department of Defense’s Maritime Supply Chain office.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details