Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fiberboard Sheet Manufacturing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture of 96-inch by 60-inch single-wall wax-resistant fiberboard sheets specifically for use in Department of Defense logistics packaging. The scope includes full production responsibilities such as sourcing raw materials, precision die-cutting to exact specifications, and applying a durable wax coating to ensure moisture resistance under demanding environmental conditions. All sheets must meet stringent military performance standards for durability, structural integrity, and protective capabilities in storage and transport environments. Final deliverables are to be palletized and prepared for shipment in accordance with DoD logistics protocols to support distribution across global military supply chains. Production must comply with NAICS code 322211 for paperboard container manufacturing, and the work is structured as a subcontract under the Defense Logistics Agency. The contract was posted on July 20, 2026, and is tied to the procurement identifier SP330024D0007 with delivery linked to SP330026F0871. While no specific place of performance or point of contact is listed, the requirement demands end-to-end control over manufacturing processes from material procurement through final delivery, ensuring consistent quality and timely fulfillment for critical defense operations.

General Info

Manufacture 96x60 wax-resistant fiberboard sheets for DoD logistics per military standards, palletized per DLA subcontract SP330024D0007.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

322211 - Corrugated and Solid Fiber Box ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 96"x60" single-wall wax-resistant fiberboard sheets for DoD logistics packaging, including raw material sourcing, die-cutting, wax treatment, and palletized delivery.

Similar Contracts

Same NAICS industry code

2026 Augusta Nursery Direct Printed BoxesThe Virginia Department of Forestry is soliciting bids for the furnishing and delivery of printed shipping boxes to be used at the Augusta Nursery located at 90 Forestry Center Lane in Crimora, Virginia. The boxes must be direct printed in black ink using printing plates supplied by the Department, ensuring consistent branding and identification. All deliveries must meet the specified requirements and be completed according to the Department’s operational needs. The solicitation, identified as QQ-124693, was posted on July 20, 2026, with responses due by July 27, 2026, at 5:00 PM. This opportunity is open to vendors under a State and Local Government (SLED) procurement, with no specific set-aside designated. inquiries may be directed to Brian Fox, the point of contact, via email at brian.fox@dof.virginia.gov or by phone at 434-995-0394. All interested parties are expected to review the full solicitation details through the provided online portal.

Department of Forestry

POSTED

DEADLINE

Fiberboard Packaging and Shipping Container SupplyThe contract involves the supply of fiberboard shipping containers that meet ASTM-D5118 standards, specifically Type CF, Style RSC-L, engineered to securely hold exactly 72 trunks per container. These containers are intended for military logistics and must ensure safe, stable transport under varied handling and environmental conditions. The packaging is part of a subcontract under the Defense Logistics Agency, falling under NAICS code 322211 for paperboard container manufacturing, indicating a focus on industrial-grade packaging production. The contract was posted on July 20, 2026, and is managed under the Department of Defense, with performance obligations tied to federal supply chain requirements. The specific delivery details and location are not enumerated, but the contract reference links to a DIBBS record indicating formal award and fulfillment tracking under contract identifiers SPE1C125D0010 and SPE1C126F5273.

Defense Logistics Agency

POSTED

DEADLINE

Packaging Material Manufacturing (Fiberboard Sheet Stock)The contract pertains to the supply of raw or semi-finished corrugated and solid fiberboard sheet stock intended for use in manufacturing shipping containers, with all materials required to meet the ASTM D4727 standard for performance and quality. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and is classified under NAICS code 322211, which corresponds to paperboard mill manufacturing. The materials must be capable of meeting rigorous durability and structural requirements necessary for defense and logistical applications, ensuring consistency and reliability in packaging solutions for military operations. Delivery and compliance are governed by federal procurement protocols, with performance expected to align with standardized specifications for fiberboard used in protective packaging systems. The contract was posted on July 20, 2026, and is part of a broader procurement effort to maintain a secure and consistent supply chain of industrial packaging materials. While no specific set-aside designation or place of performance is detailed, the subcontractor is anticipated to adhere to all applicable Department of Defense quality assurance procedures. The awarded entity will be responsible for maintaining ongoing compliance with ASTM D4727, including testing, documentation, and traceability of materials throughout the production cycle, with potential for inspection or audit by DLA representatives to confirm adherence to technical and operational standards.

Defense Logistics Agency

POSTED

DEADLINE

Corrugated Fiberboard Shipping Box SupplyThe contract involves the supply of standard corrugated fiberboard shipping boxes designed to comply with ASTM D5118, D5168, and D1974 standards, ensuring durability, performance, and compatibility with Defense Logistics Agency distribution systems. These boxes are critical for secure, efficient transport of military and government supplies across the DLA network, with manufacturing processes adhering strictly to industry specifications for strength, stacking capacity, and environmental resilience. The work is being performed under a subcontract tied to the Department of Defense and falls under the NAICS code 322211, which categorizes the manufacture of corrugated and solid fiberboard containers. The procurement is managed through the Defense Logistics Agency and is publicly accessible via the DIBBS platform, indicating formal award and active logistics integration. While specific delivery locations and contract value are not detailed, the place of performance and point of contact information are unspecified, suggesting distribution may occur across multiple sites supporting DoD operations. The posting date of July 20, 2026, reflects planned activity in the near future, and compliance with ASTM standards is mandatory to ensure interoperability and reliability throughout the defense supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of 4GV/X21/S UN-Rated BoxesThe contract calls for the manufacture of 1,260 plastic boxes adhering to the 4GV/X21/S specification, designed for the safe transport of hazardous materials in compliance with UN performance standards and ASTM D3951 packaging requirements. These containers must meet rigorous safety and durability benchmarks to ensure secure handling and transit of dangerous goods under various environmental and mechanical stresses. The production is being carried out under a subcontract arrangement through the Defense Logistics Agency, a component of the Department of Defense, indicating the critical role these boxes play in military or defense-related logistics. The work falls under NAICS code 322211, which corresponds to plastic box and container manufacturing, and the contract was posted on July 20, 2026. While specific delivery locations and point of contact details are not provided, the equipment will be used in contexts requiring certified hazardous material packaging, likely supporting defense operations or supply chains. The absence of set-aside designations suggests the subcontract is open to eligible contractors without restrictions based on business size or socioeconomic categories, and performance is expected to align with federal defense logistics standards without geographic limitations beyond the operational needs of the agency.

Defense Logistics Agency

POSTED

DEADLINE

Triple-Wall Corrugated Box ManufacturingThe contract entails the manufacture of 12-inch cubic single-wall domestic triple-wall corrugated shipping boxes specifically for military supply transport, requiring full production capabilities including printing, assembly, stacking, and palletized delivery. The boxes must meet rigorous military standards for durability, structural integrity, and dimensional precision to ensure safe handling and transport of critical logistics materials under demanding field conditions. All manufacturing processes must be executed in compliance with applicable defense specifications and quality control protocols, with finished units prepared for immediate deployment via standardized pallet configurations. This agreement is classified as a subcontract under the North American Industry Classification System code 322211, which corresponds to corrugated and solid fiber box manufacturing, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 20, 2026, and its performance is expected to support defense supply chain operations nationwide. While the exact location of performance is unspecified, delivery is required to meet military logistics timelines and distribution requirements. The contract is accessible via the DIBBS portal for award tracking and procurement transparency.

Defense Logistics Agency

POSTED

DEADLINE

GEL, ANTIMICROBIALThe contract is for the procurement of 8 packages of antimicrobial gel, each containing six 8 oz tubes of an amorphous gel containing ionic silver for broad-spectrum antimicrobial action, identified by NSN 6510-01-588-1750. The gel must have a non-extendable shelf life of 48 months, with no more than seven months elapsed from the manufacturer’s date to the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract number and lot number, in full compliance with the latest revision of Medical Marking Standard No. 1A, which supersedes MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E at packing level B and meet DLA Packaging Requirements for Procurement RP001, ensuring commercial-grade sealed unit containers and shipping packaging suitable for safe transit at the lowest carrier rate. The product is classified under NAICS code 322211 and is subject to the Buy American Act and the Berry Amendment, with the Berry threshold reduced to $150,000. Hazardous material handling and labeling must comply with IP025 and FAR 52.223-3, and the item is subject to covered defense information requirements under RD003. All deliveries are due within 20 days of award at FOB destination to FPO, zip 09566-4008. The winning contractor must submit payment requests and receiving reports exclusively through the Wide Area Workflow (WAWF) system in accordance with DFARS 252.232-7003 and 252.232-7006, and must maintain active certification in the System for Award Management (SAM) with accurate representations regarding small business status, socioeconomic programs, and compliance with restrictions on covered defense telecommunications equipment. Contractor information systems must comply with NIST SP 800-171 and the basic safeguarding requirements outlined in FAR 52.240-93 and DFARS 252.240-7997. The contract incorporates clauses for combating trafficking in persons, employment eligibility verification, equal opportunity for workers with disabilities, sustainable procurement, transportation by sea, and prohibitions on hexavalent chromium and procurement from communist Chinese military companies. Technical and quality specifications

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

APPLICATOR, COMPOUND BEThe product is a sterile applicator impregnated with compound benzoic tincture, intended for external use as an adhesive adjunct to enhance the adherence of surgical tape and wound closure adhesives. Each applicator contains 0.66 cc of the tincture, sold in a package of 160 units, and is flammable requiring storage below 40 degrees Celsius (104 degrees Fahrenheit) while avoiding excessive heat and humidity. The item has a 60-month shelf life that is non-extendable, and no more than nine months may have passed between the manufacturer’s date and delivery to the government. Labels must include the manufacturer date, expiration or retest date, and contract or lot number, all formatted in accordance with the latest revision of MMS1A. The item is covered under specific defense acquisition requirements including packaging standards, removal of government identification from non-accepted supplies, and potential handling of covered defense information. Technical and quality requirements are defined in the DLA Master List, and the solicitation follows the revision in effect on the issue or award date. The NSN is 6510-01-594-5708, with a single package quantity requested under purchase request 7017543717, to be delivered within 20 days of award. Bidders must specify the source and part number being offered, and the contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office, with performance required in Austin, Texas.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Seedling Packaging Materials Supply (Fiberboard Boxes & Paper Bags)The contract solicits the supply of fiberboard boxes and paper bags specifically designed for seedling packaging, with fiberboard boxes required to feature a full overlap construction, no hand holes, and a maximum height of 16 inches. These materials must meet strict structural and dimensional specifications to ensure safe handling and transport of seedlings during distribution. The packaging items are intended for use by a government agency involved in reforestation or conservation efforts, with the materials serving as critical components in preserving plant viability during transit and planting operations. Submitted proposals must be received by the deadline of August 3, 2026, with the opportunity being structured as a subcontract under NAICS code 322211, which pertains to paperboard container manufacturing. The contracting entity is the Oregon State Office within the Department of the Interior, though no specific location or point of contact is provided. The solicitation is open to qualified suppliers capable of consistently delivering compliant packaging solutions, with performance expected to support federal land management and ecological restoration initiatives. All bids must adhere to the technical requirements and delivery expectations outlined in the procurement notice.

Oregon State Office

POSTED

DEADLINE

SKIN CLOSURE, ADHESIVE,The contract specifies the procurement of Dermabond Advanced 12S surgical skin adhesive, a 2-octyl cyanoacrylate product supplied in 0.7 mL applicator pens, with a unit of issue of one box containing twelve units. The product must have a strict 24-month shelf life with no extensions permitted, and no more than three months may have passed between the manufacturer’s date and the delivery date to the government. Labeling requirements mandate clear imprinting of the manufacturer date, expiration date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must consist of sealed unit containers that protect contents from damage, shipped in commercial exterior containers suitable for safe delivery at the lowest freight rate to the specified delivery point in Groton, Connecticut. All items must be marked according to MMS No. 1, and government identification must be removed from non-accepted supplies. The NSN is 6510-01-614-0050, with a single box required under purchase request 7017530521, and delivery is due within five days of award. The solicitation number is SPE2DS-26-T-248J, issued by the Department of Defense’s Medical Supply Chain, with technical and quality requirements governed by the DLA Master List, and bids must include the source and part number being offered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

APPLICATOR, COMPOUND BEThe product is an applicator impregnated with compound benzoin tincture, intended for external use as an adhesive adjunct to enhance the bond of surgical tape and other wound closure adhesives. Each unit is a 0.66 cc sterile vial, packaged in groups of 160, with a total contract quantity of two packs. The item has a shelf life of 60 months, with no extensions permitted, and no more than nine months may have passed from the manufacturer’s date to the date of delivery to the government. Labels must clearly show the manufacturer’s date, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of MMS1A. The product is flammable and must be stored below 40 degrees Celsius (104 degrees Fahrenheit), avoiding excessive heat and humidity. Technical and quality requirements are governed by the DLA Master List, with specific references to RS023 for shelf-life, RD003 for covered defense information, RP001 for packaging, and RQ011 for removal of government identification from non-accepted supplies. The NSN is 6510-01-594-5708, the contract solicitation number is SPE2DS-26-T-247E, with a response deadline of July 27, 2026, and delivery required within 20 days of award to Fort Stewart, Georgia. Bidders must specify the source and part number being offered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

HHS0017406v2 Insulated shippers and cold packsThe Texas Department of State Health Services is seeking qualified vendors to supply insulated shippers and cold packs under solicitation HHS0017406v2, issued on July 17, 2026, with proposals due by August 5, 2026, at 4:30 PM Central Time. The requirement is for specialized packaging solutions designed to maintain temperature-sensitive materials during transport, supporting the operational needs of the state laboratory system. The contract is open to all eligible suppliers without a specific small business set-aside, and performance will take place within Texas, with delivery expected to meet the agency’s handling and storage standards for biological and medical samples. Point of contact for all inquiries is Courtney Meads, reachable via phone at 512-406-2478 or email at Courtney.Meads@hhs.texas.gov. The solicitation is posted on the Texas SmartBuy portal, and vendors must submit responses through the designated platform. While NAICS code and detailed set-aside information are not provided, the focus is strictly on procuring reliable, compliant insulated shipping systems and corresponding cold packs that ensure sample integrity during transit across the state’s healthcare and diagnostic networks.

Department of State Health Services

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Fuel Additive Supply (FSII, SDA, CI/LI)The contract entails the supply of aviation fuel additives including Fuel System Ice Inhibitor FSII, Static Dissipative Additive SDA, and Corrosion Inhibitor/Lubricity Improver CI/LI in either bulk or pre-mixed formulations, all of which must meet rigorous military performance specifications to ensure seamless integration into operational fuel batches. These additives are critical for maintaining fuel system integrity, preventing ice formation, managing static discharge, and inhibiting corrosion across a wide range of environmental and operational conditions encountered by military aviation platforms. The award is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 325992 indicating specialty chemical manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to support defense operations without geographic restrictions specified, implying nationwide or global applicability. The contract does not indicate a set-aside classification or specific point of contact, suggesting a broad procurement approach aimed at qualified suppliers capable of meeting stringent military quality and delivery requirements for mission-critical fuel additives.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE