Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILLER NECK, VEHICUL

Active
SPE7L1-26-T-911FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three filler necks for vehicles, identified by NSN 2590-01-343-7348, under solicitation SPE7L1-26-T-911F, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after award. The item is subject to full and open competition and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. At least one component must be sourced exclusively from approved sources listed on the relevant source control drawing, and the supplier must provide documentation verifying compliance. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior government authorization; access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA approval. Inspection and acceptance are to occur at the origin, and all government identification must be removed from non-accepted supplies. The place of performance is Keyport, WA, and the sole point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.

General Info

Procure three filler necks NSN 2590-01-343-7348, deliver in 20 days, comply with technical and export controls, source from approved suppliers.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component ManufacturingView NAICS

Place of Performance

610 DOWELL STREET, KEYPORT, WA, 98345-7610, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-911F for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILLER NECK,VEHICUL
FILLER NECK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST CONFORM TO SOURCE CONTROL DRAWING. BY
SUBMITTING AN OFFER, THE OFFEROR AGREES TO
PROVIDE SOURCE CONTROLLED COMPONENTS FROM
SOURCES APPROVED ON THE APPLICABLE SOURCE
CONTROL DRAWING."
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2590-01-343-7348 Quantity: 3 EA Purchase Request: 7017727007QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336992
New
DIBBS
CYLINDER, HYDRAULIC
Solicitation # SPE7LX-26-U-9285
The contract is for the procurement of 241 hydraulic accumulator cylinders under NSN 2590-01-453-7423, with the part number BBD17366 supplied by G.T. MACHINING & FABRICATING LTD. The item is designated as a critical application product and is being procured through DLA Direct, CONUS, with delivery required within 84 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, incorporating referenced technical and quality standards identified by R or I numbers. Packaging and labeling must conform to MIL-STD-129 and DLA’s RP001 packaging requirements, including palletization. The unit of issue is each (EA), with a total price based on a unit price of $241.00, and the contract is issued under solicitation SPE7LX-26-U-9285 with a response deadline of August 20, 2026. The NSN is linked to a DLA unit of issue reference, and government identification must be removed from any non-accepted supplies. The solicitation is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with primary point of contact Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336992
New
DIBBS
CONTROL ASSEMBLY, PU
Solicitation # SPE7L1-26-T-911U
The contract solicits one unit of a push-pull control assembly with NSN 2590-01-516-5603, classified as a commercial off-the-shelf item, under solicitation number SPE7L1-26-T-911U. The requirement is issued by the Department of Defense’s Land Supply Chain through a federal procurement channel, with performance required in Jacksonville, Florida, ZIP 32226-3404. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined based on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA Packaging Requirements for Procurement, and government identification must be removed from any non-accepted supplies. The response deadline is August 17, 2026, with an expected delivery timeline of five days after award. Primary point of contact is Kristina Derry at the provided email and phone number, and all bids must be submitted via the DIBBS platform.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336992
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M3-26-T-7818
The contract solicitation SPE7M3-26-T-7818 is a Women-Owned Small Business set-aside for the procurement of 592 units of ELBOW, TUBE and PULLEY, CORNER under NSN 4730-00-350-4261, with a total contract value of $592.00 and a delivery timeline of 210 days from the date of award, targeting delivery by March 13, 2027. Items must be manufactured to meet the requirements of source-controlled drawing NR 19207-5222874, Revision C dated June 28, 1996, and are subject to specific approved sources including KIDDE TECHNOLOGIES INC and GRINNELL FIRE PROTECTION, with the understanding that only these named sources are currently approved; however, additional qualified sources may be considered post-award. The contract mandates adherence to the DLA Master List of Technical and Quality Requirements, which supersedes all other specifications, including ASTM D3951 packaging standards. All packaging must comply with RP001 DLA Packaging Requirements and be labeled in accordance with MIL-STD-129, including barcoding per 2D Data Matrix or PDF417 standards, with unit of issue and quantity per unit pack strictly as specified. Inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania, with sampling conducted using MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based sampling plan; critical, major, and minor attributes must be verified at AQL levels of 0.1, 1.0, and 4.0 respectively, with zero non-conformances required unless otherwise stated. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. The contract requires compliance with a suite of FAR and DFARS clauses including employment eligibility verification, combating trafficking in persons, sustainable products, hazardous material identification, and NIST SP 800-171 cybersecurity assessment requirements. Payment is processed exclusively via Wide Area WorkFlow, and invoicing must follow WAWF protocols. The contracting officer is William Cain, and all deliverables must be shipped FOB origin with no quantity variance permitted. All offerors must hold a valid UEI and CAGE code, and small business
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336992
New
DIBBS
SUPPORT, RETRACTABLE, TR
Solicitation # SPE7L3-26-T-146F
The contract is for the procurement of 27 retractable trailer supports with NSN 2590014904398 under solicitation SPE7L3-26-T-146F, a total small business set-aside. Delivery is required within 123 days of award, with all units to be shipped FOB origin and inspected and accepted at the point of manufacture. The items must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special marking permitted. Packaging and palletization must adhere to DLA’s RP001 requirements. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The product is classified as a critical application item, and no ozone-depleting chemicals may be used. All components subject to Qualified Products Lists or Qualified Manufacturers Lists must be sourced exclusively from qualified suppliers. Technical data packages reference specific engineering drawings with revision controls up to revision F dated March 2020 and revision L dated November 2024. Delivery is split across two CLINs: three units to be shipped to Bremerton, WA by July 23, 2026, and 24 units to be shipped to New Cumberland, PA by November 19, 2026, with a final required delivery date of January 13, 2027. Pricing is set at $6 per unit, totaling $162. The contract enforces strict configuration control, requiring formal engineering change proposals or variance requests for any deviations, and incorporates all applicable technical and quality requirements from the DLA Master List.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336992
New
DIBBS
TOWBAR CENTER ASSEMBLY
Solicitation # SPE7L5-26-T-4568
The contract pertains to the procurement of three TOWBAR CENTER ASSEMBLIES with NSN 2590012178329 and part number 3893653, issued under solicitation SPE7L5-26-T-4568 by the Department of Defense through DLA Land and Maritime. Delivery is required FOB Origin to DLA Distribution Red River in Texarkana, TX, with a delivery timeframe of 168 days from the award, targeting an original delivery date of July 1, 2027, and a need ship date of January 19, 2027. Quantity is strictly fixed at three units with zero variance allowed. All items must be packaged and marked in accordance with MIL-STD-129, with palletization following RP001: DLA Packaging Requirements for Procurement, and packaging standards must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. Inspection and acceptance occur at the destination point by the Government, and delivery must be accompanied by electronic invoicing via Wide Area WorkFlow (WAWF). The contract incorporates multiple FAR and DFARS clauses including those related to cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, and small business payment acceleration. The contractor is required to comply with NIST SP 800-171 and safeguard contractor information systems, with deviations noted. Offers must be submitted electronically through the DIBBS portal by the response deadline of August 6, 2026, and all offerors must maintain an active UEI and provide accurate size status and socioeconomic representations in SAM. The item is classified under NAICS code 336992, and no attachments or detailed specification documents are included; all technical and quality provisions are referenced through the DLA Master List. Payment is governed under DoDAAC-based accounting systems, with no contract value explicitly stated due to incomplete pricing data in the solicitation.
LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 336992
New
Federal
48 SFS Overhead Protection Kits
Solicitation # FA558726Q0037
The 48th Security Forces Squadron is soliciting 47 Overhead Protection Kit systems—25 Green and 22 Tan—to be installed on Joint Light Tactical Vehicles currently deployed at RAF Lakenheath, in accordance with specified Salient Characteristics. The procurement is managed under solicitation number FA558726Q0037, released on August 3, 2026, with responses due by August 17, 2026. This is a combined solicitation with no set-aside classification, targeting the NAICS code 336992 which pertains to other transportation equipment manufacturing. The contracting activity is under the Department of Defense, administratively tied to the FA5587 48 Cons office, with the official point of contact located in APO AE 09461-5120. The equipment must be delivered and installed at the designated location in Lakenheath, Suffolk. Primary point of contact is A1C Brandon Hampton, with secondary support provided by Claire Switzer, both reachable via their official Air Force email addresses. All proposals must be submitted through the SAM.gov platform linked in the solicitation.
FA5587 48 Cons (admin Only No Req)

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336992
New
DIBBS
Domestic Manufacturing and Supply Chain Compliance (Small Business / Socioeconomic Participation)This contract opportunity is open to small and socioeconomically certified businesses, including WOSB, SDVOSB, and HUBZone firms, which may participate as prime contractors or subcontractors under FAR 52.219-28 post-award representation requirements. The effort is focused on domestic manufacturing and supply chain compliance, targeting businesses capable of supporting the Department of Defense’s Land Supply Chain through localized production and procurement. The NAICS code 336992 indicates the work falls under Other Transportation Equipment Manufacturing, suggesting the need for specialized components or systems tied to military land systems. The place of performance is designated as Cortlandt Manor, New York, with a zip code of 10567-5000, and the solicitation is set to close on August 13, 2026, with a posting date of August 2, 2026. Participation requires adherence to socioeconomic reporting standards post-award, ensuring certified businesses maintain their status and fulfill their contractual obligations under federal small business programs.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L1-26-T-902Y
The contract is for the procurement of one bracket, vehicular C, with NSN 2590-01-529-0469 and part number A22-44658-001, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-902Y. The item must be delivered within five days to Joint Base Lewis-McChord, Washington, FOB origin, with no tolerance for quantity variance. All packaging and labeling must comply with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, and palletization must adhere to DLA’s packaging requirements. The shipment must be sent via traceable freight methods, excluding parcel post, and is designated as a RDD/NCMS shipment. Delivery is required by July 30, 2026, and all supplies must be marked with the specified government designation and contact information. The contract references technical and quality standards from the DLA Master List, which controls compliance, and the item is subject to inspection and acceptance at the destination. Government use codes, project identifiers, and point of contact details are provided for official tracking and administrative purposes.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
DIBBS
SHOE, JACK-SUPPORT
Solicitation # SPE7L1-26-T-902T
The contract pertains to the procurement of one jack-support shoe, identified by NSN 2590-01-255-6371 and purchase request 7017688348, under solicitation SPE7L1-26-T-902T. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The product must be manufactured in accordance with TDP Revision A Gen 1 referencing drawing number 81337 5-13-4624, with the revision dated 08/30/2019. Ozone-depleting chemicals are strictly prohibited, and any substitutes require prior approval unless explicitly authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirements, and all items must be delivered within five days of award, FOB origin, with no tolerance for quantity variance. Delivery is mandatory to the specified location at Camp Smith, Cortlandt Manor, New York, and shipments must use traceable freight methods only—parcel post is unauthorized. The required delivery date is July 30, 2026, with a response deadline for proposals set for August 13, 2026, and the contract is issued under full and open competition with no set-aside.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
BOAST RFOP - Track Shoe Set, Vehicular - NSN: 2530-00-150-5895
Solicitation # PANDTA-25-P-0000_010369
Army Contracting Command - Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price Order of 89,216 Track Shoe Sets, Vehicular (NSN 2530-00-150-5895, Part Number 5704208), with two optional 12-month periods of 65,569 units each, to be delivered within 270 calendar days after receipt of order. This is a Full and Open competition restricted exclusively to vendors with a fully executed BOAST Basic Ordering Agreement in place by the proposal deadline of July 29, 2026; failure to meet this requirement renders proposals ineligible regardless of price or other factors. Award will be made to the lowest-priced responsive offeror, with evaluation based solely on price reasonableness. The item is subject to export control, requiring vendors to be certified in the Joint Certification Program to access the Technical Data Package, and unregistered vendors must submit DD Form 2345 to the U.S./Canada Joint Certification Office prior to proposal submission. All supplies must be manufactured and delivered in accordance with strict military specifications including MIL-STD-2073-1 for preservation and packing, MIL-STD-129 for marking, and ISPM 15 for wood packaging materials, with unique item identification and government-assigned serial numbers applied per applicable DFARS clauses. Inspection and acceptance occur at origin using MIL-STD-1916 with verification levels of VL-1 for major characteristics and VL-2 for minor characteristics. Packaging and labeling must omit identification of the item’s nature where applicable, and all hazardous material shipments must comply with IATA, IMDG, and CFR Titles 29, 40, and 49. Contractors must comply with OPSEC requirements under AR 530-1, complete awareness training, and adhere to NIST SP 800-171 DOD Assessment Requirements. Performance shall be shipped to Texarkana, Texas under FOB Destination terms, and payment must be submitted electronically through Wide Area Workflow. Data deliverables including Engineering Change Proposals, Requests for Variance, and Notices of Revision must conform to specified CDRLs and be submitted in Microsoft Office or PDF format to the Procuring Contracting Officer with copies to the Administrative Contracting Office and Engineering POC. Contractors must be registered in SAM, possess a valid C
W6QK Acc- Dta

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 336992
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-139T
The contract solicitation SPE7L3-26-T-139T requires the procurement of 25 units of a CONTROL ASSEMBLY, PU with NSN 2590009778976, along with one-time First Article Testing of two units, under a delivery schedule of 578 days ADO. Performance and delivery are to occur at the contractor’s origin, with inspection and acceptance also taking place at the origin by the Defense Contract Management Agency or Quality Assurance Representative. All items must comply with strict packaging requirements under ASTM D3951 and DLA’s RP001, including palletization and labeling per MIL-STD-129 with GS1 barcoding, and hazard labeling compliant with 29 CFR 1910.1200. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for Qualified Products Lists (QPL) and Qualified Manufacturers Lists (QML) for components, configuration change management, and removal of government identification from non-accepted supplies. The contract mandates CMMC Level 2 compliance and adherence to 252.204-7012 for safeguarding covered defense information, with cyber incident reporting required within 72 hours. Technical data associated with the item is subject to export control under ITAR or EAR, restricting access to contractors approved by DLA through the US/Canada Joint Certification Program and completion of mandatory export control training. Invoicing must be submitted electronically through Wide Area WorkFlow, and payment administration is handled via the DoDAAC referenced in the award document. Contractors must provide their Unique Entity Identifier and CAGE code, represent their small business or socioeconomic status if applicable, and comply with all FAR and DFARS clauses related to equal opportunity, combating trafficking, employment eligibility, whistleblower rights, and prohibited telecommunications equipment. The solicitation does not include pricing details, with the estimated value derived from historical data at approximately $12,507.50, and the contract type remains pending determination. Proposals must be submitted electronically via DIBBS by August 10, 2026, with no physical submissions allowed.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336992
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-T-893P
This contract pertains to the procurement of PAD, CUSHIONING with the NSN/Part Number 2590-00-178-0160, for a quantity of 12 units, under solicitation SPE7L1-26-T-893P. Deliveries are required within 20 days after delivery order issuance, and responses must be submitted by August 10, 2026. The item falls under NAICS code 336992 and is subject to full and open competition with no set-aside restrictions. Compliance with DLA packaging requirements and the prohibition of Class I ozone-depleting chemicals is mandatory, superseding any conflicting specification requirements; alternative chemicals require prior approval unless explicitly authorized. The contractor must adhere to strict export control regulations under ITAR or EAR, as the product involves controlled technical data, which cannot be disclosed to foreign persons without prior government authorization, including to foreign nationals within the United States. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Additionally, the supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Configuration changes require an Engineering Change Proposal, and any deviations or waivers must be formally requested. Inspection and acceptance may occur at the origin, and government identification must be removed from non-accepted supplies. The contract incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the acquisition type and relevant dates. Primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of 600 linear feet of gasket material identified by NSN 5330-01-557-0920 and part numbers X-113BT and TRIMLIK-X-113BT, with a 10% allowable increase in quantity for a maximum delivery of 660 feet. The unit of issue is the foot and the contract总价 is $600 based on an implied unit price of $1.00 per foot. Delivery is required within five days after award to the specified location in Albany, GA, under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including cold/dry preservation methods, and all items must be marked per MIL-STD-129 with no special marking required. The item is not classified as hazardous, but compliance with hazardous material protocols under IP025 and OSHA’s Hazard Communication Standard (29 CFR 1910.1200) is mandatory if applicable, along with submission of Safety Data Sheets prior to award. Radioactive material thresholds are defined, and notification is required if any component exceeds specified activity levels. The contractor must use WAWF for invoicing and must have a valid UEI and CAGE code, while also certifying compliance with regulations regarding covered defense telecommunications equipment and subcontractor disclosures. The award mechanism is likely Low Price Technically Acceptable, with proposals submitted electronically through DIBBS before the August 17, 2026 deadline. Special clauses cover whistleblower rights, former DoD official compensation restrictions, third-party data limitations, and government work product control, indicating a high level of regulatory oversight. The contract does not specify a contract type but involves a single CLIN with no options or indefinite-delivery elements, and no key personnel or security clearance requirements are identified.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-917D
The contract pertains to the procurement of one O-ring with National Stock Number 5331016701000, to be delivered within 20 days of order placement, with an original required delivery date of August 3, 2026. The item is subject to stringent packaging requirements mandated by MIL-DTL-117, Type II, Class C, Style 1, which specifies medium duty, waterproof, greaseproof, and opaque packaging to protect against UV degradation, applicable to all direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E for preservation and containerization and MIL-STD-129 for labeling, including the special marking code “20 – Do not bend,” with barcoding in compliance with DoD standards. Palletization follows DLA’s RP001 packaging requirements, and shipment must be executed via traceable means, excluding parcel post, to the specified delivery address in Johnston, Iowa. The contract is FOB origin, with inspection and acceptance occurring at destination, and all pricing is fixed at $86.00 per unit, with additional line items totaling $712.00, though context for non-O-ring items remains unclear. The solicitation number is SPE7L1-26-T-917D, issued by the Defense Logistics Agency under the Department of Defense, with mandatory electronic submission via DIBBS by August 17, 2026. The contract incorporates numerous FAR and DFARS clauses covering cybersecurity, safeguarding covered defense information, combating trafficking, employment verification, hazardous material handling, export control, electronic invoicing through WAWF, and restrictions on procurement from Communist Chinese military companies. It also includes clauses related to NIST SP 800-171 compliance, equal opportunity, subcontracting for commercial items, and prohibition of hexavalent chromium. All packaging, marking, and shipping of hazardous materials must align with IP025 and 29 CFR 1910.1200, and the contractor is required to submit hazardous material labels for review. No options, modifications, or delivery schedules beyond the 20-day window are specified, and the contractor must comply with all representation and certification requirements under Section K, including UEI and CAGE code disclosure, though no specific offeror responses are included. Funding, accounting data, and payment office details are not
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L1-26-T-917U
This contract is for the procurement of one bracket, angle with NSN 5340-01-537-5042 and part number 3471822 from Oshkosh Defense LLC, under solicitation SPE7L1-26-T-917U. The item is a critical application component required for delivery within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. Delivery must be made to NMCB 4 at Port Hueneme, California, with shipping required via traceable means only—parcel post is prohibited. All packaging must comply with DLA’s master requirements, including MIL-STD-129 for labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under Fed-Std-313, with DLA’s technical and quality requirements taking precedence over any commercial standards. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be pre-approved. The contract enforces strict compliance with DLA packaging and procurement protocols, including specific unit of issue and quantity per unit pack details, and requires palletization in accordance with RP001. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with the delivery destination and shipping instructions clearly defined. The required delivery date is July 15, 2026, and all documentation must reflect the approved solicitation revision in effect at the award date. The item must be marked and tracked using the provided traceable control number and project identifier, and government-specific coding such as IPD 13 and DIC A4A must be applied. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332510 for metal fabrication.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-Q-1455
This contract solicits four units of a critical gun part designated as a lever and shaft, with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, mandating that all manufacturers or exporters register with the Directorate of Defense Trade Controls; failure to provide proof of registration will render an offer ineligible. Government First Article Testing is required, and offerors may be contacted post-submission to price the FAT requirement. Two exhibits must be submitted: one fully assembled and coated unit and one machined but unassembled, uncoated unit. The NSN is 0001S00000052, with a delivery schedule of 281 days after contract award. The solicitation number is SPE7L1-26-Q-1455, issued on August 5, 2026, with responses due by August 14, 2026, under the Department of Defense’s Land Supply Chain, with performance at Hill AFB, Utah. The contracting office point of contact is Zane Zwayer, reachable via email and phone listed in the contract data.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, FUEL TANK
Solicitation # SPE7L1-26-T-917P
The contract specifies the procurement of a Parts Kit for a Fuel Tank, with a quantity of 113 units identified by NSN 2910-01-292-3253 and purchase request number 7016266849. Delivery is required within 49 days after delivery order issuance, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 336310 and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must have government identification removed if rejected. The contract is subject to Covered Defense Information rules and mandates CMMC Level 2 certification for third-party assessors. Technical data associated with this item is export-controlled under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including subsidiaries and overseas employees, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The place of performance is Anniston, Alabama, 36201-4199, with Rita Hughes of DLA listed as the primary point of contact.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-917S
The contract is for the procurement of 200 units of a PLUNGER, DETENT with NSN 5340-00-782-1762 under solicitation SPE7L1-26-T-917S, issued by the Department of Defense through the Land Supply Chain office. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special coding. The item must conform to Technical Data Package Rev A, referenced to drawing number 19207-10949808 Revision B dated January 1, 1999, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The contract prohibits the use of Class I ozone-depleting chemicals in any form and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Inspection and acceptance criteria follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for critical, major, and minor attributes are set at VII, IV, and II respectively. A Certificate of Conformance is authorized under FAR 52.246-15 unless overridden by a quality assurance letter. The end recipient is the Government of Israel Ministry of Defense, with delivery coordinated through the freight forwarder InterGlobal FWRD SV Inc Co G&B PKG Co in Jersey City, NJ, and the primary point of contact is Forsan Saad. The required delivery date is June 1, 2026, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. Configuration control and potential deviations require an Engineering Change Proposal or formal variance request, and covered defense information protocols apply.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-917T
The item specified is a mounting bracket identified by NSN/Part Number 5340-01-628-3279, with a quantity of eight units required under purchase request 7016687716. The delivery is due within 77 days after award, and the solicitation is issued under contract number SPE7L1-26-T-917T, with a response deadline of August 17, 2026. The procurement is governed by Defense Logistics Agency requirements, including technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, restricting any transfer of technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization are permitted to handle the technical data. The place of performance is in New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s Land Supply Chain, and inquiries should be directed to Isabelle Szulewska at the provided contact information.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916U
The contract pertains to the procurement of one helical compression spring identified by NSN 5360-01-339-0693 and part number A51091MDX, supplied by HUNT VALVE COMPANY, INC. Delivery is required within 20 days to the destination FOB, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment, and marking procedures, with no special marking required. Packaging must be palletized according to DLA requirements, and shipment is designated for vessel delivery to USS BOXER LHD 4 at FPO AP 96661 under DLAD procedures C19 and C20. The contract strictly prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The solicitation number is SPE7L1-26-T-916U, with a response deadline of August 17, 2026, and the required delivery date is August 3, 2026. Technical and quality standards referenced in the DLA Master List are incorporated by reference, with compliance determined based on the revision in effect on the solicitation or award date. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Spring Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916L
This contract specifies the procurement of two helical compression springs with part number 41001657 and NSN 5360-00-566-6315, furnished under solicitation SPE7L1-26-T-916L. The springs must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging levels, and marking guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the springs, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The items are to be delivered FOB origin within 20 days, with no tolerance for quantity variance. Delivery is to the Taiwan Army Zuo-Ying Ammunition Sub-Depot in Kaohsiung City, with no special marking required beyond standard military specifications. The contract mandates that all supplies be shipped without Government identification if rejected, and applies Covered Defense Information requirements as applicable. The unit of issue is each, with a total price of $2.00 for two units, and the freight forwarding and transportation procedures follow DLAD Proc Notes C19 and C20. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. The original required delivery date is August 7, 2026, and the contract is governed by the DoD’s authorized procurement framework, incorporating all relevant DLA packaging, inspection, and acceptance protocols applicable at origin. The NAICS code is 332510, and the solicitation is open to federal contractors under a standard commercial item acquisition process.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details